Used Safety Contactor for sale (10,944)

Condition: reconditioned (used), Awl grinding machine Manufacturer: harich (Deckel) Model: SSMplus (S0E) Refurbished, with CE marking Includes warranty Equipment: - Machine stand - Integrated dust extraction - Grinding wheel with flange - Dressing tool - New machine electrical system in accordance with current safety regulations - Documentation for the machine and control cabinet in printed form, consisting of: - Operating manual - Wiring diagram - CE declaration of conformity Additionally equipped with safety measures in accordance with standard EN 60204-1, consisting of: - Control cabinet with main switch, power supply, contactors, motor protection, safety switching devices - Emergency stop mushroom button instead of the main switch on the machine - Green button for turning the machine on (illuminated) - Red button for turning the machine off - LED status indicator in the form of the harich logo: - Blue for machine on Nsdpfoz Hy E Ijx Akiewn - Green for grinding spindle on

Condition: used, Year of construction: 2008, Overview This ATECMI FLEXOPAL is an automatic depalletizer for empty glass bottles, built in 2008 and used on 750 ml wine bottles at an output of up to 12,000 bottles per hour. The gantry head grips each layer with inflatable tubes and sets it onto the discharge table. An integrated automatic strap cutter with strap intake removes the pallet straps without operator intervention, and magazines take up the interlayers and the empty pallets. The scope includes the pallet infeed and outfeed conveyors, the bottle outfeed conveyors and an ATECMI inliner. Technical data - Manufacturer: ATECMI - Model: FLEXOPAL - Year of manufacture: 2008 - Output: up to 12,000 bottles per hour - Containers: glass bottles, 750 ml (wine) - Layer gripping: inflatable tubes Equipment - Gantry depalletizer with layer gripping head and overhead hood - Automatic strap cutting and strap intake - Magazines for interlayers and empty pallets - Powered roller conveyors for pallet infeed and outfeed - Bottle discharge table with outfeed bottle conveyors - ATECMI inliner - Operator panel with touchscreen and emergency stop - Safety fencing with access doors - Layout drawing available Condition Used. Out of production since the line was dismantled; the depalletizer is still installed and under power. Viewing on site is possible by appointment. Nodj Adnxdepfx Akiewn Availability Available immediately. Location: France.

Condition: used, A compact but robustly built industrial level free standing resaw. Variable feed speeds Suitable for softwoods and hardwoods Quick, simple and safe to operate Feeding system / general capacity. RVP 200 variable speed feed system Steel feed rollers 200mm dia. Variable feed speed 0 - 30 mt/min speed. Max. feed roller to blade clearance 200mm. Max. fence to blade clearance 200mm. Main saw Dia. of saw pulleys 800mm. Max. cutting height 400mm. Max. blade width 80 x 0.8mm. Max. / Min blade length 5530 / 5380mm. Height of the table from the floor 950mm. Table size 1060 x 8000mm. Automatic star-delta starter. Automatic pneumatic braking of wheels. Safety micro-switch to doors. Front infeed support rollers with emergency protection cable. Tilting table 15 dergrees. Telescopic blade guard. CHACO blade guide on the table. Rackwork. Dust scrapers on wheels. Nwedpfx Akszx D Umeion Steel saw blade ready for use. Extraction points x 2 - 100 and 120mm dia. Working air pressure 6 to 8 bar.

Condition: good (used), Gratings, grating, light grids, insert grids, insert grids, stair treads, safety steps, grating step, step, perforated grating -Grating: hot-dip galvanized steel 1090 x 910 mm 15 pieces Nwodpfxewmby Ej Akijn -Height: 30 mm -Struts: wall thickness 2/1.7 mm -Bridge height: 30/10 mm -Shipping/Price:complete -Transport dimensions: 1090/910/H445 mm -Total weight: 242 kg

Condition: good (used), mileage: 523,141 km, power: 266 kW (361.66 HP), first registration: 04/2018, fuel type: diesel, tire size: 315 / 70 / R22.5, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 5,920 mm, total width: 2,550 mm, total height: 4,000 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, power mirror, soot filter, spoiler, General information Cab: Streamspace Technical information Number of cylinders: 6 Engine capacity: 10.677 cc Nwodpfx Ake Afyk Ioion Transmission Transmission: Mercedes-Benz, 12 gears, Automatic Axle configuration Tyre size: 315 / 70 / R22.5 Make axles: Mercedes-Benz Brakes: disc brakes Front axle: Max. axle load: 7500 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 7.080 kg Carrying capacity: 12.020 kg GVW: 19.100 kg Interior Interior: grey Number of seats: 2 History Number of owners: 1 Condition Technical condition: good Visual appearance: good Number of keys: 2 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Air horn - Aluminium fuel tank - Armrest - Car kit - Low-noise - Particulate filter - Radio, MP3 enabled - Radio/CD player - Remote central locking - Speed limiter - Stability control - Toolbox - Visor

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2019, total length: 13,890 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65, wheelbase: 9,010 mm, Equipment: tail-lift, = Additional options and accessories = - Rear doors = Further information = Axle configuration Tire size: 385/65 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tire tread depth left: 20%; Tire tread depth right: 20% Rear axle 2: Max. axle load: 9000 kg; Tire tread depth left: 70%; Tire tread depth right: 20% Rear axle 3: Max. axle load: 9000 kg Weights Unladen weight: 6,751 kg Payload: 32,249 kg GVW: 39,000 kg Functional Tail lift: Dhollandia, under-ride platform, 2000 kg Maintenance MOT (Periodic Technical Inspection): valid until 12/2026 Identification License plate: OR-67-VY Nwodpfx Ake Afyqbjisn Product safety Manufacturer: RG Waalwijk, Havenweg 15, 5145NJ WAALWIJK, NL, robert.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 09/2017, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65, wheelbase: 9,010 mm, Equipment: tail-lift, = Additional options and accessories = - Rear doors = Further information = Axle configuration Tire size: 385/65 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9000 kg; tire tread depth left: 10% Njds Afyquspfx Akiswn Rear axle 2: Max. axle load: 9000 kg; tire tread depth left: 40%; tire tread depth right: 70% Rear axle 3: Max. axle load: 9000 kg; tire tread depth left: 70%; tire tread depth right: 70% Weights Unladen weight: 6,614 kg Payload: 32,386 kg GVW: 39,000 kg Functional Tail lift: Dhollandia, under-ride plate, 2000 kg Identification Registration number: OP-38-YN Product safety Manufacturer: RG Waalwijk Havenweg 15 5145NJ WAALWIJK, NL robert.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2019, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65, wheelbase: 9,010 mm, Equipment: ABS, = Additional options and accessories = - Rear doors = Further information = Axle configuration Njdpfe Afyrfjx Akiown Tire size: 385/65 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tire tread depth left: 50%; Tire tread depth right: 20% Rear axle 2: Max. axle load: 9000 kg; Tire tread depth left: 20%; Tire tread depth right: 20% Rear axle 3: Max. axle load: 9000 kg; Tire tread depth left: 20%; Tire tread depth right: 20% Weights Unladen weight: 6,751 kg Payload: 32,249 kg GVW: 39,000 kg Identification Registration number: OR-66-VY Product safety Manufacturer: RG Waalwijk Havenweg 15 5145NJ WAALWIJK, NL robert.

Condition: used, Manufacturer: Ima Farmomac Model: F370 18VL 8C Year: 1987 frame - Machine refurbished by the manufacturer in 2004 with pharmaceutical qualification. Type : Monoblock bottle filling and crimping machine. Application: Glass and plastic syrup bottles with aluminium PP28 cap (Ø 28 mm-) Industrial sector: Pharmaceuticals and cosmetics Movement: continuous automatic Number of filling heads: 18 units Nsdpfxszg I Uyj Akijwn Number of crimping heads: 8 units Volumetric pump: max. filling 1000 ml   Available sizes: 370 ml and 200 ml Capacity: 6000 vials/h in 370 ml Capacity: 7500 vials/h in 200 ml   NEM cap lifter Vibrating bowl Electrical cabinet Laminar flow cabinet Vessel/buffer tank before filling. Vial infeed conveyor with paddles Control box and power cabinet. Protective covers with safety devices. Available history and documentation   These elements can be quoted separately. change of format, bottle sealing (screw caps, pressure caps, end caps, PFPs, etc.), etc.

Condition: used, Weiss Type: WT3-480/60 Weiss Temperature Test Chamber WT3-480/60 EX / ATEX – explosion-proof test chamber Water-cooled version With digital control and touch panel Temperature range: -60 °C to +160 °C For sale is a used temperature test chamber from the manufacturer Weiss Umwelttechnik GmbH. The system has an explosion-proof test chamber and is suitable for industrial temperature tests within the permissible operating conditions. ATEX explosion protection: Marking according to the nameplate: II 2/- G IIB T3 Gb/- Test chamber explosion-proof CE 0044 The permissible operating conditions are determined by the manufacturer's documentation. Control panel "Touch Panel" Control and operating functions as well as temperature programs can be called up and set via the touch panel. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: WT3-480/60 Device type: Temperature test chamber Version: EX / ATEX – Test chamber explosion-proof Cooling: water-cooled Humidity control: not available Test chamber volume: approx. 480 liters External dimensions without door fittings: Height: approx. 2050 mm Width: approx. 1000 mm Depth: approx. 2480 mm External dimensions with hinges and door handle: Height: approx. 2050 mm Width: approx. 1100 mm Depth: approx. 2480 mm Overall depth including touch panel: approx. 2600 mm Internal dimensions: Height: approx. 920 mm Width: approx. 800 mm Depth: approx. 650 mm Note on dimensions: The specified dimensions are reference values for the explosion-proof WEISS 480-liter series. Deviations are possible in this special version. Data for temperature tests: Temperature range: -60 °C to +160 °C Temperature change rate: Heating: approx. 4.04 K/min Cooling: approx. 1.42 K/min Measured values according to the workshop report. Data for operation: Rated voltage: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 17.0 kW Rated current: 30.0 A Refrigerant: R404A – 3.5 kg R23 – 1.2 kg Refrigeration system: Max. low pressure: 18 bar g Max. high pressure: 25 bar g Standing pressure: 8.5 bar g Equipment: Digital control with touch panel Test chamber lighting Network interface according to workshop report Water-cooled refrigeration system Explosion-proof test chamber Weight: approx. 930 kg Reference value of the explosion-proof WEISS 480-liter series For your safety as a buyer, the following information! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. A workshop report is available for this device. Temperature functions and other test points have been documented. According to the workshop report, the cooling function has been repaired. The buffer battery has been replaced. Work has been carried out on the display cabling. Details according to the workshop report. Condition: used Scope of delivery: (See picture) Shipping by forwarding agent possible upon request. (Changes and errors in the technical data and information are subject to change!) Nsdpfx Ake Ad Iy Ieiswn We will gladly answer any further questions you may have by telephone.

Condition: used, total length: 3,720 mm, total width: 2,300 mm, total height: 2,750 mm, Year of manufacture: 2021 Colour: White Weight: 7.700 kg Price: On request - Year: 2021 - Documentation available: Yes - CE marking present: Yes - Serial number: 2102061 - Drive system: CNC Nwedpozrgncsfx Akijn - Control system brand: Cybelec - Control system type: Cybtouch-8W - Power [kW]: 11.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 135 - Max. working width [mm]: 3100 - Column gap [mm]: 2500 - Throat depth [mm]: 410 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 210 - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 3720mm x 2300mm x 2750mm (l x w x h) - Transport weight [kg]: 7700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2015, loading space length: 13,420 mm, loading space width: 2,480 mm, loading space height: 2,630 mm, total length: 14,040 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 55 / R22.5, wheelbase: 8,860 mm, color: orange, Equipment: tail-lift, Axle configuration Tyre size: 385 / 55 / R22.5 Make axles: BPW EcoPlus Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 8.940 kg Carrying capacity: 33.060 kg GVW: 42.000 kg Functional Tail lift: Dhollandia DHSM.30, slider lift, 2500 kg Nwjdpfxe Afc Dwe Akijn Make of bodywork: SOR Iberica SOR-S3E Carrier Vector 1550 Cooling engine: diesel and electric Wall thickness: 50 mm History Number of owners: 1 Condition General condition: average Technical condition: average Visual appearance: average Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,570 h, load capacity: 2,000 kg, lifting height: 4,625 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,120 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Nwsdpfx Ako Afq Aneion Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Non-marking Front tire condition: 40 - 60% Rear tire type: Non-marking Rear tire condition: 40 - 60% Battery type: PzS Battery year of manufacture: 2021 Battery condition: 80 - 100% Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, half cabin, STVZO compliant, full free lift, CE certificate, safety light, non-marking tires, interior mirror, joystick, windshield wiper, LED, seat.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 7,958 h, load capacity: 5,000 kg, lifting height: 4,520 mm, free lift: 1,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,370 mm, drive type: Diesel, Diesel forklift ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire condition: 60 - 80% Njdpfxo Afq Auj Akiown Rear tire type: Superelastic Rear tire condition: 60 - 80% Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, soot filter, STVZO compliant, full cabin, full free lift, CE certificate, safety light, interior mirror, exterior mirror, joystick, windshield wiper, seat

Condition: used, Year of construction: 2004, Overview Isobarometric filler built in 2004 by the Italian manufacturer CIMEC, with 8 filling valves. The machine filled carbonated lemonade into glass bottles: 1,300 bottles/h in 33 cl and 750 bottles/h in 75 cl. Last production in 2022. The filler has been dismantled and is stored ready for shipment. Technical data - Year of manufacture: 2004 - Filling system: isobarometric (counter-pressure), 8 filling valves - Output: 1,300 bottles/h (33 cl), 750 bottles/h (75 cl) - Product: carbonated soft drinks (lemonade) Nwodps Afd Htofx Akijn - Containers: glass bottles, 330 ml and 750 ml - Electrical supply: 400 V / 50 Hz, 3 kW - Compressed air: 6 to 7 bar, max. 120 Nl/min - Dimensions: approx. 1,600 x 1,400 x 2,400 mm (L x W x H) - Control: push-button panel with text display Equipment - Stainless-steel frame with transparent safety guarding - Electrical cabinet - Enerfluid side-channel blower - Pall filter housings - Conveyor section Condition Dismantled and stored, ready for shipment. Inspection by appointment. Availability Available immediately. Location: France.

Condition: used, Year of construction: 2013, Overview This Cermex F38741, built in 2013, is an automatic cardboard case erector that forms shipping cases from flat blanks for an end-of-line packaging setup. Blanks are taken from the magazine, erected, the bottom flaps are folded and closed, and the open case is discharged on the outfeed rails to the downstream packer. The machine comes from a wine packaging operation and has been dismantled and stored. Technical data - Manufacturer: Cermex - Model: F38741 - Year of manufacture: 2013 - Machine type: automatic cardboard case erector - Output: up to 40 cases per minute - Power supply: 400 V, 50 Hz, 3P+N+PE, 23 A full load - Control: Siemens SIMATIC S7-200 PLC (CPU 224) Equipment - Blank magazine with infeed chain and lugs Njdpfj Afdr Nox Akiewn - Erecting station with pick-up head on a cable-chain carriage - Bottom flap folding and closing section - Outfeed rails for the erected cases - Enclosure with transparent safety doors and signal tower - Separate control cabinet with Siemens operator panel, emergency stop and control transformer - CE marked Condition Dismantled and stored. An inspection is possible. Availability Available immediately. Location: France.

Condition: used, Year of construction: 1992, pressure 0200 t chamfer lenght 3100 mm distance between columns 3000 mm stroke length max. 400 mm feed down 160 mm/sec feed up 140 mm/sec feed under pressure 10 mm/sec oil volume 500 l dayligth 600 mm Control ModEva 12 S Cybelec throat 250 mm total power requirement 28 kW weight of the machine ca. 18,5 t dimensions of the machine ca. 4,5 x 2,7 x 3,4 m Electric hydraulic machine with Cybelec ModEva 12S control, some accessories, foot and two hand switch pane and safety arrangements. Machine has been verhauled and modernized in 2009 !! Machine is floor standing. Nedpfx Akjyy A D Ssiown Machine has 9 controled axes and a Laser controled crowning arrangement.

Condition: new, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm down holder 16 Stück no. of strokes 9 - 17 Hub/min cutting angle 0.5 - 2.5 ° throat 150 mm table height 830 mm oil volume 250 ltr. weight of the machine ca. 11.000 kg range L-W-H 4150 x 2100 x 2450 mm ----- Robust electro-hydraulic CNC guillotine shear with "swing-beam" * Includes CYBELEC CNC touch-screen control system * Includes CNC electro-hydraulic blade-gap adjustment * Includes CNC electro-hydraulic cutting-angle adjustment ----- Equipment: - CNC electro-hydraulic guillotine shear with "swing-beam" - Includes CYBELEC CNC touch-screen controller, model "CybTouch 8" - Selected CNC control functions: * Backgauge positioning (X-axis) * Blade-gap adjustment * Piece counting * Cutting-length limitation * Material selection (including sheet thickness) * Cutting-line illumination (for cutting to a scribed line) ... and many more - Motorized backgauge, travel range = 5.0 – 1,000 mm (X-axis) * Mounted on recirculating ball screws * Automatically retracts/swings up at maximum travel to . accommodate longer workpieces * Includes selectable "swing-away" (retraction) function Nwedpj Afzu Ijfx Akisn * Positioning accuracy: 0.1 mm * Travel speed: approx. 80 mm/sec. - 1x side gauge, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball transfers in the front support table - Hinged finger guard with safety switch * Finger guard with viewing windows for cutting along a scribed line - Cutting line illumination (shadow line) - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Movable foot switch - CE mark / Declaration of Conformity - Operating manual + circuit diagram + hydraulic schematic * Image shows an identical model

Condition: excellent (used), Year of construction: 1997, pressure 220 t chamfer lenght 4175 mm distance between columns 3760 mm column arm 410 mm dayligth 450 mm stroke 180 mm ajustment speed 100 mm/sec working feed 8.0 mm/sec return speed 75.0 mm/sec table width 180 mm table height 960 mm oil volume 190 l 0 295 bar controlled axis 5 Anzahl Number of working hours ca. 9.400 h total power requirement 15.0 KW weight of the machine ca. 16000 kg. range L-W-H 4810 x 2200 x 2990 mm Very good / well-maintained condition (!!) Only approx. 9.400 operating hours - Verified condition - Machine video - ?v=nDcOAjUtNi0 Equipment: - CNC electro-hydraulic press brake - Equipped with AMADA "OPERATEUR" CNC control - 5 controlled axes (Y1+Y2/X1+X2/R) - Swiveling control panel (on the left) - CNC-controlled depth adjustment (Y-axis) - CNC-controlled backgauge adjustment (X-axis) - CNC-controlled vertical adjustment of the backgauge fingers (R-axis) Nsdpo Afzu Ujfx Akiewn * Pneumatic height adjustment for the backgauge fingers - 4x manually adjustable backgauge fingers - AMADA CNC bed crowning (compensation system) - AMADA upper tool clamping system with wedge-style crowning * Includes 1x set of segmented punch tools (30°) - AMADA 60-series lower tool holder * Includes 1x set of segmented die holders * Includes 1x set of segmented 2-V dies - Lateral safety guards (swiveling doors) - Rear safety guards (swiveling door + protective fencing) - CE-marked - 1x mobile two-hand control unit - 1x mobile foot pedal * Includes a handwheel for fine-tuning the ram penetration depth (Y1+Y2) - Machine documentation

Condition: new, pressure 320 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 510 mm ram stroke speed 140 mm/sec work speed 8.0 mm/sec return speed 130 mm/sec work stroke 310 mm dayligth 525 mm Njdpfe Afzvfjx Akijwn table height 900 mm oil volume 290 ltr. voltage 400 Volt weight 16500 kg range L-W-H 4550 x 2450 x 3200 mm ----- CNC "C" SERIES electro-hydraulic press brake featuring: * Increased daylight (open height) * Extended cylinder stroke * Increased throat depth * Long-type "full machine cover" ----- Equipment: - DELEM CNC control, model "DA-69T," with touchscreen/graphics * 2D and 3D graphical programming via touchscreen * Three-dimensional visualization, including a representation of the machine . during simulation and production * 24-inch high-resolution TFT color display * Compatibility with the Delem "Modusys" system for flexible expansion and . customization of control modules * USB port and interfaces for external peripheral devices * Support for custom, application-specific software . * Control system with multitasking environment * Interface for sensor-supported bending and automatic corrections * Profile-S3D offline programming software * Swiveling touchscreen control unit, positioned at the front left - CNC-controlled axes: Y1, Y2, X, R, Z1, and Z2, plus CNC-controlled crowning - CNC-controlled, motorized backgauge * Travel range: X-axis 750 mm // R-axis 250 mm * Travel speed: X-axis 800 mm/s // R-axis 200 mm/s * Equipped with recirculating ball screws * CNC-controlled, motorized backgauge fingers (Z1 + Z2) - Sectionalized "gooseneck" (swan-neck) upper tool: ROLLERI 135.85.R08, "System A" * Includes quick-change clamping system * Includes integrated crowning system within the tool holder - Sectionalized 4-V universal die (60x60 mm) - Rear safety system: light curtain - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser safety system at the front of the machine (including FPSC) - 2x front support arms with a sliding system (HIWIN linear bearings) - 1x mobile dual-pedal foot control - CE marking / Declaration of Conformity - Operating manual, including electrical and hydraulic schematics * Image shows a machine of nearly identical design

Condition: new, sheet width 3050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm down holder 16 Stück no. of strokes 10 - 19 Hub/min cutting angle 0.5 - 2.0 ° throat 150 mm table height 830 mm oil volume 140 ltr. weight of the machine ca. 8.000 kg range L-W-H 4150 x 2100 x 1900 mm ----- Robust electro-hydraulic CNC guillotine shear with "swing-beam" * Includes CYBELEC CNC touch-screen control system * Includes CNC electro-hydraulic blade-gap adjustment * Includes CNC electro-hydraulic cutting-angle adjustment ----- Equipment: - CNC electro-hydraulic guillotine shear with "swing-beam" - Includes CYBELEC CNC touch-screen controller, model "CybTouch 8" - Selected CNC control functions: * Backgauge positioning (X-axis) * Blade-gap adjustment * Piece counting * Cutting-length limitation * Material selection (including sheet thickness) * Cutting-line illumination (for cutting to a scribed line) ... and many more - Motorized backgauge, travel range = 5.0 – 1,000 mm (X-axis) * Mounted on recirculating ball screws * Automatically retracts/swings up at maximum travel . to accommodate longer workpieces * Includes selectable "swing-away" (retraction) function * Positioning accuracy: 0.1 mm * Travel speed: approx. 80 mm/sec. - 1x side gauge, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball transfers in the front support table Nedpfxj Afzvro Akiswn - Hinged finger guard with safety switch * Finger guard with viewing windows for cutting to a scribed line - Cutting line illumination (shadow line) - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Movable foot switch - CE mark / Declaration of Conformity - Operating manual + circuit diagram + hydraulic schematic * Special accessories included: - Pneumatic sheet support device for cutting thin metal sheets * Image shows an identical machine model

Condition: used, This listing is for a CS Cleaver Scientific LTD The Cube Dry Bath - 01 TCDB----- Cleaver Scientific TCDB – The Cube Dry Bath Nwjdpfx Aksxzh Shjion The Cleaver Scientific TCDB, known as "The Cube Dry Bath", is a compact, digitally controlled dry bath incubator designed for accurate and efficient sample heating in laboratory environments. It is ideal for a variety of applications, including enzyme reactions, nucleic acid denaturation, and other temperature-sensitive protocols. ----- Technical Details Condition: The TCDB is in excellent working condition with minimal use. Specifications: Model: Cube Dry Bath Incubator (Single Block Unit – Block Not Included) Voltage: 240V (unit spec), also listed as 110V, 50–60 Hz – please verify power compatibility Temperature Range: 5°C above ambient to 150°C Temperature Stability: ±0.2°C Temperature Uniformity: ±0.2°C Incremental Control: 0.1°C Timer: Up to 99 hr : 59 min, with continuous operation option Heated Power: 125W Controller: Digital Microprocessor Controller Weight: Approx. 2.1 kg Block Material: Molded Aluminum Alloy Block Dimensions: 79 x 104 x 50 mm Display: Dual LCD (temperature & time shown simultaneously) Safety Features: Leak-proof chamber, over-temperature protection, SSR fault detection Includes: Cleaver Scientific TCDB Cube Dry Bath Power Cord ----- Applications Ideal for use in: Restriction enzyme digestion DNA denaturation Coagulation studies Melting agar Hybridization procedures Hot Start PCR® BUN (Blood Urea Nitrogen) assays Incubation with water (mini water bath functionality)

Condition: excellent (used), The REX Düker Hydro 65 is a bowl cutter from REX Düker, a recognized manufacturer of machinery for the meat industry. The machine is designed for chopping and cutting meat raw material for the production of sausages, cold cuts, and other products requiring precisely prepared meat batter. How does the REX Düker Hydro 65 bowl cutter work? The Hydro 65 is equipped with a 65-liter bowl and a 6-knife cutting head, driven by a 20 kW main motor. Thanks to the hydrostatic transmission, blade shaft speed is infinitely variable up to 4500 rpm, allowing the intensity of cutting to be precisely matched to the type of raw material being processed. The bowl rotates at up to 500 rpm in both directions, and the machine offers 3 separately switchable bowl speeds. Operation is controlled via an SL23 membrane keypad with contactor control and motor protection, while smooth speed regulation is available through a potentiometer. A digital display shows blade shaft speed, bowl revolutions, and temperature in real time, and safety switches for the bowl and temperature ensure safe operation. Key advantages of the REX Düker Hydro 65 The REX Düker Hydro 65 stands out with infinitely variable blade speed thanks to its hydrostatic drive, allowing the cutting process to be precisely matched to different recipes and types of meat raw material. Three independently switchable bowl speeds, together with bidirectional bowl rotation, further increase the machine’s operational flexibility. A robust stainless steel construction, a control panel with a digital display of operating parameters, and a noise protection cover combine high functionality with comfortable, safe operation — an important factor for daily, intensive work in a meat processing plant. Technical specifications of the REX Düker Hydro 65 Manufacturer: REX Düker Machine type: Hydro 65 Bowl capacity: 65 l Cutting head: 6 knives Main motor power: 20 kW Nedjztxx Njpfx Akijwn Blade shaft speed: infinitely variable up to 4500 rpm (hydrostatic transmission) Bowl speed: up to 500 rpm, bidirectional, 3 speeds Power supply: 400 V, 50 Hz Protection: 63 A slow-blow fuse Controls: SL23 membrane keypad, digital display Application of the REX Düker Hydro 65 bowl cutter The REX Düker Hydro 65 is used in meat and sausage processing plants, wherever precise chopping and mixing of meat raw material is required for the production of fillings, sausages, cold cuts, and other products with a uniform consistency. Infinitely variable blade and bowl speed make the machine well suited both to recipes requiring gentle cutting and to intensive chopping of raw material.

Condition: new, carrying capacity 500 kg. number of suction cups 6 Stück suction cup dia. 215 mm 0 8.0 m³/h tool adaptor Kranöse 80.0 mm voltage 400 V total power requirement 0.18 kW weight of the machine ca. 120 kg dimensions of the machine ca. 2400 x 1100 x 584 mm Furnishing : - for the horizontal transport of smooth, dry and airtight panels - Robust supporting structure made of steel - Painted in RAL 2000 with low weight Nsdoxak Ddepfx Akiown - Galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x springy, articulated and adjustable suction cup holders - 6x suction cups Ø 215 mm - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump - with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Operating handle can be extended to 1,000 mm from the center of the traverse - Sturdy metal case for your crane control - Operation "suction / release" by hand slide valve - Control and safety device for vacuum lifters * Robust control box. * Contactor circuit for the vacuum pump * Safety warning device with audible alarm * Vacuum gauge with danger zone indicator * Large vacuum storage tank with safety check valve * Double actuation when releasing the load - Fine dust filter to protect the vacuum pump - Documentation * Special accessories included: - 6x ball valves to switch off individual suction cups * so that smaller formats can also be lifted * without having to move suction cups or traverses - Spiral connection cable small helix * with an extension length of 3,500 mm, version as * Extension cable with CEE plug and coupling * is routed to the lifting device next to the load chain

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 17434268, type of input current: three-phase, input voltage: 400 V, electrical fuse: 63 A, input current: 61 A, input frequency: 50 Hz, pressure: 18 bar, stack height: 1,900 mm, total length: 1,600 mm, total width: 750 mm, tank capacity: 410 l, empty load weight: 315 kg, type of cooling: water, Machine Description and Technical Data 2.1 Machine Description The RED COMPACT units are delivered fully pre-assembled and require only electrical connection and hydraulic hookups on site. Main Components: A: Self-supporting frame with stainless steel cladding (panels 1–6 removable) B: Basin with evaporator C: Condenser unit D: Temperature controller E: Control cabinet F: Hydraulic circuit with pump (second pump optional) 2.2 Structure The compact monoblock housing contains all components necessary for operation. The external cladding is made of stainless steel; individual panels can be removed for maintenance purposes. 2.3 Basin The stainless steel basin houses the evaporator block. It is insulated with high-density polyurethane foam. A blower ensures water circulation within the basin. 2.4 Condenser Unit The condenser unit can operate with either cooling tower or well water, depending on order specification. It supplies the evaporator block and is located beneath the basin. 2.5 Temperature Controller The controller is a modern microcomputer with a high-resolution display and LED indicators for operating status. The control system is programmed to offer maximum operational safety with easy user operation. 2.6 Control Cabinet The control cabinet is dust- and splash-proof. It contains: Nwodpfxoxvca Ao Akien - Main and emergency switch - Contactors, thermal relays, fuses - Safety transformer for control circuits Access is provided by removing panel 1 below the temperature controller. 2.7 Hydraulic Circuit with Pump Panel 3 is removed for connection. The following connections are provided: A – Water make-up (T1): Connection to water supply; fill level is controlled via float valve. B – Return line (T2): Return flow from the consumers. C – Overflow (T3): Connection to the process wastewater outlet. D – Chilled water outlet (P1): Supplies the consumers; open the shut-off valve before commissioning. A second pump (P2) is available as an option. E – Condenser water supply: The shell-and-tube condenser can be operated with well water or cooling tower water: Scheme A – Well Water: Use the small connections C1, C2 (inlet and outlet). The large connection remains closed. A pressure-regulated valve control can be installed as an option. Scheme B – Cooling Tower Water: Use C3 and C1/C2 in parallel to increase the flow cross-section. It is recommended to install a mechanical filter at the water inlet to prevent contamination. Manufacturer: FIC S.p.A. – Via Trivulzia 54, 23020 Mese (SO), Italy Model: RED COMPACT V.7