Used Brake Bleeding Device for sale (28,142)

Condition: used, Braking unit Njdpfx Ajdc Iphokislh -Brake with clutch -Power: 0.15 kW -Resetting force: 30 kp -Stroke: 50 mm -Dimensions: 630/320/H460 mm -Weight: 56 kg

Condition: used, DC brake, braking device, electric motor brake -Manufacturer: AER Statomat -Type: D 6225/V -Current: 200+50 amps -Operating voltage: 380 V AC Nlsdpfxed Dh A Is Akijh -Number: 1x power supply available -Price: per piece -Dimensions: 160/215/H155 mm -Weight: 3.2 kg

Condition: used, DC brake, braking device, electric motor brake -Manufacturer: AER Statomat -Type: D 53245050 -Current: 150 70 amps -Operating voltage: 380 V AC Nlodpfx Aksd Dh A Noieh -Number: 1x power supply available -Price: per piece -Dimensions: 160/215/H155 mm -Weight: 3.2 kg

Condition: excellent (used), DC brake, braking device, electric motor brake, brake module, brake unit, brake chopper -Manufacturer: HuK Hilger u. Kamp; Kern, Statomat brake device frenotron-se unused original packaging -Motor power: max. 3.5 kW -Technical data: see photo -Number: 2x power supply units available -Price: per piece Nljdpfx Aksqrwxdjioh -Dimensions: 100/70/H110 mm -Weight: 0.4 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, control type: CNC control, actuation type: electric, controller manufacturer: Safan, controller model: TS1, bending force (max.): 80 t, working width: 2,550 mm, stroke length: 290 mm, throat depth: 1,000 mm, distance between stands: 2,700 mm, installation height: 1,050 mm, operating speed: 90 mm/s, table height: 950 mm, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, overall weight: 6,800 kg, total length: 3,450 mm, total width: 1,820 mm, total height: 2,510 mm, input voltage: 400 V, warranty duration: 3 months, pressing force: 80 t, Equipment: documentation/manual, emergency stop, foot remote control, safety light barrier, SAFAN E-Brake Press Brakes are a series of machines equipped with electric drives. Lenze servo motors, controlled by inverters from the same manufacturer, enable fast and reliable system performance over many operating hours. Additionally, the machine only consumes electrical energy during the downward stroke of the ram. The upward movement of the ram is achieved by the force of springs. During standby, the energy consumption is minimal, as there is no hydraulic pump motor maintaining pressure, unlike hydraulic press brakes. Power consumption is estimated to be up to 70% lower than with conventional hydraulic press brakes. SAFAN E-Brake Servo-Electric Press Brake Force: 800 kN (80 tons) CNC Controlled Axes: Y1-Y2-X-R-Z1-Z2 Ram Stroke: 290 mm Open Height (Daylight): 590 mm Upper Beam Approach Speed: 90 mm/s Upper Beam Accuracy: +/- 0.01 mm Maximum Backgauge Finger Speed: 350 mm/s Maximum Backgauge Range (third reference point, X-axis): 1000 mm Hydraulic Upper Tool Clamping: WILA Connected Load: 11 kW Machine Weight: 6,350 kg Machine Width: 3,450 mm Machine Depth: 1,820 mm Machine Height: 2,510 mm Power Supply: 3/N/PE 50Hz – 400/230V Servo-electric drive (no hydraulic system) Drive transmission via belts Nlsdpsut S E Nofx Akioh

Condition: used, DC brake, braking device, electric motor brake -Manufacturer: AER, Statomat braking device type B 122420 / V16 -Current: 50 A -Operating voltage: 380 V -Control voltage: 220V -Dimensions: 160/140 / H135 mm -Weight: 1.6 kg Nodpfx Aegypvdjkislh

Condition: used, DC brake, braking device, electric motor brake -Manufacturer: AER Statomat Nlodocarz Ropfx Akish -Type: B 54245020/v15 -Current: 150+100 amps -Operating voltage: 380 V AC -Number: 1x power supply available -Price: per piece -Dimensions: 160/215/H155 mm -Weight: 3.2 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, stroke length: 265 mm, throat depth: 410 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, number of axes: 6, table height: 900 mm, oil tank capacity: 250 l, overall weight: 12,500 kg, total length: 6,450 mm, total width: 2,650 mm, total height: 2,750 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, number of support arms: 2, pressing force: 175 t, clearance between the columns: 3,600 mm, distance table to ram: 530 mm, table length: 4,050 mm, table width: 104 mm, type of input current: three-phase, Equipment: CE marking, safety light barrier, 2013 Durma AD-S 40175 CNC Press Brake – 6 Axis – Cybelec ModEva 10S Control Used 2013 Durma AD-S 40175 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Cybelec ModEva 10S graphic control, Y1, Y2, X, R, Z1 and Z2 axes, CNC motorised crowning, laser guards, tooling and rear safety doors. Manufacturer: Durma Model: AD-S 40175 Axes: 6 Year: 2013 Capacity: 4000mm x 175T Control: Cybelec ModEva 10S Control Includes: Large Selection of Top & Bottom Tooling Description 2013 Durma AD-S 40175 CNC Press Brake, a high-quality 6-axis CNC hydraulic press brake with 4050 mm bending length and 175 tonne bending force. This machine is ideal for precision sheet metal bending, fabrication workshops, engineering companies, subcontract metalwork and production environments requiring a robust, accurate and well-specified press brake. This Durma AD-S 40175 is fitted with a Cybelec ModEva 10S Graphic CNC Control, offering 3D graphical programming and automatic bend sequences. The machine has 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2, giving excellent flexibility for accurate bending and efficient backgauge positioning. The machine is in very good condition and comes complete with a large selection of Euro-style top and bottom press brake tools, laser guards, foot pedal, CNC controlled motorised crowning, quick-release top tool clamps and rear safety doors. Key Features Bending length: 4050 mm Bending force: 175 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Cybelec ModEva 10S Graphic CNC Control Condition: Very good condition Crowning: CNC controlled motorised crowning Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications Model: AD-S 40175 Bending force: 175 tonnes Bending length: 4050 mm Distance between columns: 3600 mm Y-axis rapid speed: 120 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 100 mm/s Crowning: Motorised Daylight: 530 mm Table width: 104 mm Table height: 900 mm Stroke: 265 mm Throat depth: 410 mm Support arms: 2 Backgauge finger blocks: 2 X-axis travel speed: 500 mm/s X-axis travel: 650 mm R-axis travel speed: 350 mm/s R-axis travel: 250 mm Motor power: 18.5 kW Oil tank capacity: 250 litres Machine dimensions: 6450x2650x2750 mm Machine weight: 12,500 kg Cybelec ModEva 10S Graphic CNC Control The machine is fitted with a Cybelec ModEva 10S Graphic CNC Control, a user-friendly press brake control designed for graphical programming and efficient bending setup. Control features include: 3D graphical control interface 10.4” colour TFT screen 128 MB RAM 128 DM main memory Easy Cursor operation Automatic bend sequence calculation Single-page part programming capability CAD/CAM sequence viewing support Included Equipment This used Durma AD-S 40175 press brake is supplied with: 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Njdpfx Aoz Imc Njkiolh Cybelec ModEva 10S Graphic CNC Control Large Selection of Euro-style top & bottom tooling CNC controlled motorised crowning Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Front support arms Backgauge finger blocks

Condition: used, Rotating device Gunter Seibold rotating device for HTS coils – continuously variable drive (Type S05082) Description: Professional rotating device for holding and rotating HTS coils with winding cores. Developed for the uniform distribution of two-component resin during the curing process. Ideal for development, laboratory, or production environments with high-temperature superconductor coils. The winding form is electrically heated; the power supply is directly connected to the form (not included in the scope of delivery). The machine impresses with its precise control, ease of operation, and service-friendly design. Technical features Solid machine stand: Welded square tube construction with adjusting screws and floor anchors Drive: Three-phase planetary gearbox motor (11 kW, 400 V, 50 Hz, 3 phases) Continuously variable speed (0.2 – 100 min⁻¹) Njdezil R Repfx Akiolh Soft start & soft stop via frequency inverter (4-quadrant controller) Electromagnetic spring force brake (safe stopping in case of power failure) Rotating direction can be switched left / right Control panel: 5.7" touch panel for setting speed, direction, ramps, time, or number of revolutions Emergency stop button, ergonomically integrated 2 programmable analog inputs Electrical system & control cabinet: Control integrated in the machine stand 400 V / 230 V power supply, 24 V DC control voltage Circuit breaker, RCD protection 30 mA Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Control cabinet with air conditioning unit Complete grounding & static discharge of the main shaft Adjustable work area light (swivel and height adjustable) Feature / Value Max. coil diameter 1,500 mm Coil passage 1,700 mm Center height above floor 1,100 mm Max. load on turntable 500 kg Turntable Ø 600 mm, 4 T-slots (DIN 650) Speed range 0.2 – 100 min⁻¹ (continuously variable) Torque 775 – 539 Nm Operating voltage 400 V / 50 Hz Control voltage 24 V DC Connected power 11 kW Connected current 32 A Color scheme (according to RAL) Base machine: Blue (RAL 5010) Moving parts: Yellow (RAL 1021) Control panel / control cabinet: Light gray (RAL 7035 / 5010) Weight: approx. 1800-2000 kg Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, 80 Braking Resistors ELECTRONICS / PLC Control Manufacturer: LTi DRIVES Type: BR-090.03.540-UR 750V DC 300W Condition: Good used condition. Fully functional prior to removal. Nlodezu A Svopfx Akieh Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, functionality: fully functional, overall weight: 3,000 kg, operation weight: 3,000 kg, maximum load weight: 3,000 kg, empty load weight: 3,000 kg, loading space volume: 18 m³, loading space width: 2,000 mm, loading space length: 3,000 mm, loading space height: 3,000 mm, Year of construction: 2022, operating hours: 2,000 h, machine/vehicle number: K22092001, ## Complete Nitrogen Generation System – Generator + High-Pressure Booster + Chiller For sale: a complete industrial nitrogen generation and high-pressure supply system, designed for use with high-power fiber laser cutting machines. The system allows nitrogen to be generated on-site and supplied to the laser at the required high pressure, significantly reducing dependence on liquid nitrogen deliveries. ### Complete system includes: Nlodpfx Akezv T Abeijh * Nitrogen generator * High-pressure nitrogen booster * Industrial chiller / cooling system * Control system * Filtration and necessary system components ### Technical specifications: Nitrogen generator * Nitrogen purity: up to [99.99%] * Nitrogen capacity: [30 Nm³/h] * Outlet pressure: [8 bar] * Automatic operation High-pressure booster * Maximum nitrogen pressure: [200 bar] * Capacity: [25 Nm³/h] * Designed for continuous industrial operation * Suitable for fiber laser cutting applications Chiller * Cooling capacity: [XX kW] * Designed for cooling the nitrogen booster/system * Industrial continuous-duty design ### Application The system was used for supplying nitrogen to a high-power fiber laser cutting machine. Suitable for laser cutting of: * Stainless steel * Aluminum * Carbon steel and other materials where high-pressure nitrogen cutting is required The equipment is sold as a complete system. Condition: Used, fully functional Location: Lithuania Availability: Immediately available The system can be inspected and tested on site. More photos, videos, and detailed technical specifications are available upon request. Worldwide transport can be arranged.

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160 For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft For wood shavings and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood shavings and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Nsdpfxjcnw T Ij Akijlh Also suitable for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip collection containers with clamping bracket and chip collection bag. System is fully assembled upon delivery, allowing for quick deployment. Mobile. Description of the filter: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standardly tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a novel locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug 5-pin and phase reverser 2 swivel casters and 2 fixed casters with parking brake Manual cleaning Model: RLA 160 Article No.: 5131620 Technical data: Intake port diameter: 160 mm Nominal air flow: 1448 m³/h Max. air flow: 2400 m³/h Negative pressure at Vnenn: 2247 Pa Filter area: 9.21 m² Filter material: Dust class M Residual dust content: H3 (< 0.1 mg/m³) Filter cleaning: Compressed air supply: Chip collection volume: 2 x 193 l Supply voltage: 400 V Supply frequency: 50 Hz Motor power: 2.2 kW Sound pressure level max.: 73 dB(A) Dimensions (length x width x height): 1681 x 830 x 1654 mm Weight: 254 kg Location: Available from stock in 54634 Bitburg.

Condition: excellent (used), Year of construction: 2021, 2021 Baykal APHS 41240 4-Axis CNC Press Brake with Delem DA-66T Control Nlsdpfs Ad Duusx Akioh Pressure: 240 tons. Bending length: 4100 mm. Control: Delem DA-66T. Axles: Y - beam up/down, X - stop approach and bending distance setting, R - stop up/down, Crowing (bending angle compensation). Power supply: 3-phase. S/No: 28635. Note: Equipped with a large set of bending tools. S/No.28635 (10/2021). Note: Machine located in Czestochowa, Poland.

Condition: excellent (used), Year of construction: 2021, 2021 Bystronic Xact Smart 225/4100 CNC Press Brake with Bystronic ByVision Controller Thrust: 225 T. Maximum working length: 4,100 mm. Maximum stroke: 200 mm. Rapid traverse speed: 140 mm/s. Working speed: 1–10 mm/s. Return speed: 115 mm/s. S.No: XACT21278SE (2021). Note: Machine located in Czestochowa, Poland. Nledpfxs Ad Dplj Akieh Machine weight: 15,000 kg.

Condition: good (used), functionality: fully functional, Year of construction: 2006, stroke length: 200 mm, overall weight: 11,600 kg, total length: 4,500 mm, total width: 2,000 mm, total height: 2,850 mm, input voltage: 400 V, pressing force: 170 t, clearance between the columns: 2,700 mm, distance table to ram: 350 mm, table length: 3,100 mm, type of input current: three-phase, Equipment: documentation/manual, safety light barrier, Amada HFP 170/3 CNC press brake | 2006 | AMNC-PC | Wila clamping system Machine specifications Manufacturer: Amada Model: HFP 170/3 Year of manufacture: 2006 Condition: used, in good working order Control system: Amada AMNC-PC Tool clamping system: Wila Njdpfxoz S Nuqe Akielh Included: 1 set of tools Dimensions: approximately 4,500 × 2,000 × 2,850 mm Machine weight: approximately 11,500 kg Location: Waanrode, Belgium Description Amada HFP 170/3 CNC press brake from 2006, equipped with AMNC-PC control and a Wila tool clamping system. The machine is used but still in good working order. One set of tools is included with the sale. The machine is being sold due to the purchase of a larger press brake. Transportation can be arranged upon consultation. The machine is stored in Liège but can be inspected while powered on.

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Nsdpfxjcnw U Dj Akislh Very quiet. Application area: Clean air extraction systems for wood chips and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Can also be used for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip containers with clamping bracket and chip collection bag. The system is fully assembled upon delivery, allowing for quick deployment. Mobile. Filter description: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standard and tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of supply: Metal fan impeller. Inspection opening for cleaning the bypass filter. Connection cable 5 m with CEE plug 5-pole and phase inverter. 2 swivel castors and 2 fixed castors with parking brake. Preparation for connection of machine detection for up to 8 machines and slide valve controls. Manual cleaning. Sound pressure attenuator available as an accessory. Model: RLA 125 M Article no.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal volume flow: 1095 m³/h Max. volume flow: Vacuum at Vnenn: Filter area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from the lower edge of the extraction port to the ground: 850 mm Weight: 194 kg Location: Arriving at warehouse 54634 Bitburg.

Condition: good (used), Year of construction: 1994, throat depth: 360 mm, pressing force: 100 t, clearance between the columns: 2,600 mm, Make: Gasparini Model: PSG 100 Year of manufacture: 1994 Type: Press brakes Control: CNC Nlodpfxs Aa Dc Do Akish Controller: upgraded DELEM DA-65R controller Crowning: yes (hydraulic crowning) Press force (tons): 100 tons Working width (mm): 3000 mm Distance between columns (mm): 2600 mm Throat depth (mm): 360 mm Back gauge stroke (mm): 650 mm Power (kW): 7.5 kW Dimensions L x W x H (mm): 3500 x 1550 x 2600 mm Machine weight (kg): 9000 kg

Condition: excellent (used), stroke length: 215 mm, power: 11 kW (14.96 HP), pressing force: 150 t, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, safety light barrier, Bystronic PR 150 Ton x 3100mm 6 Axis Back Gauge. X1. X2. R1. R2. Z1. Z2 Hydraulic Upper Tool Clamping Hydraulic Crowning Hydraulic Hemming table ( Dutch Folding ) 100mm Extra Daylight Motorised Laser Guarding Cybelec ModEva 12 Colour Graphic Control Nodj Aa A Urspfx Akislh Full Upper & Lower Tooling Set of Manuals Can be viewed under power We can load to suitable transport

Condition: used, Bystronic XACT Smart 100, 100Ton x 3m, Year 2021.07, Weight 9000kgs. Included is the tooling shown in the photographs. Nsdpfo Ad U T Iox Akijlh 2021 Bystronic XACT Smart 100/3100 CNC Press Brake with 100 Ton capacity and 3100mm bending length. Tooling included. Available from stock in Prestwick, Ayrshire. Description The Bystronic XACT Smart 100/3100 is a modern CNC press brake designed for accurate and efficient sheet metal bending operations. Manufactured in 2021, this machine offers a 100-ton bending capacity and a 3100mm bending length, making it suitable for a wide range of fabrication, engineering and subcontract manufacturing applications. Offered from our Prestwick facility in Ayrshire, the machine is supplied complete with the tooling shown in the photographs and is available for immediate inspection. The XACT Smart range is renowned for its straightforward operation, high bending accuracy and reliable performance in both jobbing and production environments. Key Features: 100 Ton bending capacity 3100mm bending length Year 2021 CNC controlled Approximate weight 9,000kg Tooling included as shown Immediate availability Inspection welcomed This machine represents an excellent opportunity to acquire a late-model European CNC press brake at a substantial saving against new replacement cost.

Condition: ready for operation (used), Year of construction: 2008, Available immediately ex-works: CNC press brake AMADA Type HFT 80 - 25 Year of manufacture 2008 Touchscreen control Pressing force 80 tons Working length 2570 mm Njdpfj Afcmxex Akiolh Distance between uprights 2125 mm Overhang 420 mm Approach speed 100 mm/s Working speed 10 mm/s Retraction speed 100 mm/s Stroke 200 mm Overhang 420 mm Drive power 9 kW Weight 5750 kg Complete set of tooling Price: EUR 19,500.00 plus VAT, ex-works.

Condition: good (used), Year of construction: 2008, Used 3-meter E Brake by Safan Type: E Brake 100 3100 TS1 Capacity: 3100 x 100 tons Y1, Y2, X, R, Z1, and Z2 CNC controlled Wila hydraulic top clamp Adjustable crowning Year of manufacture: 2008 Nedpfo Aazxiex Akielh

Condition: used, Year of construction: 2008, functionality: fully functional, total length: 4,000 mm, quill stroke: 350 mm, quill travel distance: 350 mm, overall weight: 24,350 kg, input voltage: 400 V, power: 38.5 kW (52.35 HP), type of input current: three-phase, AMADA HFP 400-4L NT CNC HYDRAULIC PRESS BRAKE – 400 TONS / 4 METERS Amada HFP 400-4L NT hydraulic press brake from 2008, manufactured in France by Amada Europe. Robust and rigid machine, designed for bending thick sheet metal and large lengths in boiler making, metal construction, and industrial sheet metal fabrication. TECHNICAL SPECIFICATIONS - Manufacturer: Amada (Amada Europe S.A., France) - Model: HFP NT 400-4L - Year of manufacture: October 2008 - Serial number: B080063 - Bending force: 4,000 kN (approximately 400 tons) - Bending length: approximately 4 meters - Maximum stroke: 350 mm - Machine weight: 24,350 kg - Power supply: 400/415 V – 50 Hz – three-phase - Installed power: 38.5 kW - Rated current: 67 A - Sound level: less than 75 dB(A) - CE marking NUMERICAL CONTROL - Original Amada AMNC PC control system - Programming screen mounted on a pivoting arm - Remote electronic handwheel for fine adjustment (x5 function) - Control panel with emergency stop and test mode - Floor-mounted control pedal SAFETY - Fiessler AKAS laser safety barrier, with AKAS II-3M receiver - Operator hand protection as close as possible to the punch - Closed protective grating at the rear of the machine BACK GAUGES - Motorized back gauges controlled by the numerical control system - Guided by ball screws and linear rails - Repeatable sheet metal positioning INCLUDED TOOLING - Segmented punches and dies mounted on the machine - Additional set of dies, punches (including Eurostamp), and accessories, on a pallet and in a crate CONDITION Machine located in an active workshop, complete equipment (control, safety barrier, back gauges, tooling). Paintwork worn, consistent with industrial use. SALES CONDITIONS - Location: Netherlands - Incoterm: EXW Dordrecht (negotiable) - Disassembly, loading, and transport are the responsibility of the buyer - Availability: from November 3, 2026 Njdpfx Asz Sva Hskielh - Inspection possible by appointment

Condition: excellent (used), Year of construction: 2006, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General information Machine type: hydraulic CNC bending press Manufacturer/Model: TRUMPF TrumaBend V1300 Year of manufacture: 2006 Operating hours: 109,800 h Approximate weight: 12,950 kg Performance data Press force: 1,300 kN Bending length: 3,230 mm Free clearance between uprights: 2,690 mm Overhang: 420 mm Stroke: max. 215 mm Optional stroke: 445 mm Table-beam distance: max. 505 mm Optional table-beam distance: 735 mm Usable installation height: 385 mm Optional installation height: 615 mm Table width: 120 mm Working height: 1,050 mm Angle of ram: ±10 mm Back gauge and tool clamping Back gauge system: 4 axes Upper tool clamping: hydraulic Crowning: CNC Machine dimensions Length: 3,640 mm Njdpfxez S D Tue Akiolh Width: 2,060 mm Height: 2,285 mm EQUIPMENT 4-axis back gauge system Hydraulic upper tool clamping CNC crowning

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Nlodpfj Adzr Rex Akijh General Data Manufacturer: EHT Type: EHP 8-25 Year of manufacture: 1992 Machine type: Press brake Performance Data Press force: 800 kN Press force: 80 t Working length: 2,550 mm Bending length: 2,550 mm Frame width: 2,550 mm Electrical Data Operating voltage: 380 V Frequency: 50 Hz Control voltage: 22 V Rated current: 29 A MACHINE DETAILS Dimensions Length: 3,000 mm Width: 2,200 mm Height: 2,500 mm Weight Machine weight: 7,000 kg

Condition: used, functionality: fully functional, Year of construction: 1992, machine/vehicle number: 56979, overall weight: 7,500 kg, total length: 5,000 mm, total width: 1,200 mm, total height: 2,200 mm, input voltage: 380 V, input frequency: 50 Hz, pressing force: 135 t, type of input current: AC, machine is functional ok, from down linear tool is one channal damage. perfect machine for starters or when a company have only periodic press jobs. Nedps Aarbhefx Akijlh we sale out by fact that we need the space. machine is unther still on power