Used Sac Ks 500 for sale (29)

Condition: ready for operation (used), functionality: fully functional, Thickness planer SAC RS53, 4 knives Specification: • Condition – used, after inspection • Working width – 530 mm • Working height – 240 mm • Motor power – 4.0 kW • 4-knife cutterhead for traditional knives • Analog thickness indicator • 2 feed speeds • Full, straight infeed roller before the cutterhead • Two steel outfeed rollers after the cutterhead • Slip roller in the lower table • Manual height adjustment (up/down) Iedpfexdxk Tox Ag Uetb • Table supported by a single solid piston • Original paintwork • Outlet for chip extraction, diameter 145 mm • Weight approx. 800 kg • Overall dimensions: 95 x 100 x 105 cm (L x W x H) Additional information: • The photos shown reflect the actual condition of the item for sale • Possible to power on and test the machine on site.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, grinding width: 1,320 mm, grinding height: 160 mm, Wide Belt Sander SAC Project RT 1320 Specification: • Condition – used, fully serviced and calibrated • Manufacturer – SAC • Model – Project RT 1320 • Working width – 1320 mm • Maximum working height – 160 mm • Two sanding units: - First unit: calibrating roller made of hard rubber, diameter 300 mm (brand new, recently resurfaced) - Second unit: platen with sectional shoe and jump-in/out function • Dust extraction brush at the outfeed • Main motors: 10 and 11 kW • Total machine power at full load – 28 kW • Machine operated via touchscreen panel with memory for various programs and settings as required • Capability to operate in manual mode (user-defined parameters) or automatic mode (pre-saved programs with settings and parameters) • Stepless adjustment of the second unit’s rotational speed • Stepless feed speed adjustment • Electronic thickness gauge for the workpiece • Vacuum pump included • Belt cleaning/blow-off mechanism • Oscillation controlled by photoelectric sensors • Conveyor in very good condition • Extension roller tables included • Material thickness measuring gauge • Sensor to prevent feeding elements that are too thick • Original paintwork • Abrasive belt size – 2620 x 1320 mm • Extraction ports – 3 x 175 mm + 120 mm from brush • Weight – 2300 kg • Year of manufacture – 2001 • Overall dimensions – 255 x 205 x 230 cm (L x W x H) Additional information: • Excellent original technical and visual condition Itodpfx Asw U Dxfjg Usb • Provided photos show the actual condition of the item for sale • Possibility to connect and test the machine on site

Condition: ready for operation (used), Thicknesser SAC RS53 4 knives Specification: • working width - 530 mm • working height - 240 mm • 5.0 kW engine • 4-knife shaft for traditional knives • analog thickness indicator • 2 feed speeds • full, straight pulling shaft in front of the planing shaft • two steel outgoing rollers behind the planing shaft • sliding roller in the lower table • manual up/down adjustment • table supported by 1 solid piston • original painting • sawdust extraction outlet fi 140 mm • weight approx. 800 kg • dimensions 92 x 100 x 160 cm (length x width x height) Iedpfowgdghsx Ag Ustb Additional information: • the photos show the actual condition of the item for sale • the device can be switched on and checked on site.

Condition: excellent (used), Year of construction: 2000, Good morning, We are offering for sale a professional thicknesser of Italian manufacture, a reputable company SAC model RS63 To begin with, some useful information about the machine: * working width - 630 mm * working height - 240 mm * engine with power of 7,5 kW * 4-knife shaft for traditional knives * analogue thickness indicator * 4 feed speeds * full spiral trailing roller in front of the planer shaft. * one outfeed steel roller, smooth, behind the planer shaft. * manual up/down adjustment * top supported by 4 screws * brake on the motor * original paint job * outlet for sawdust extraction fi 160 mm * weight about 900 kg * 2000 year of production * machine meets CE standards * overall dimensions 110 x 116 x 121 cm (length x width x height). Isdpfx Agon E Tlzs Ujtb The machine until the last days worked in the carpenter's shop, so it bears acceptable traces of use, nevertheless, it has undergone a comprehensive review with us in order to detect and eliminate any defects so you can be sure that the machine is operational, does not require any financial contribution and is immediately ready for further work in your carpenter's shop.

Condition: good (used), Year of construction: 1984, SAC used jointer planer SAC FS 430 - 430 mm planing width - 2.90 m table length - 120 mm cutterhead with 4-knife strip knives - 3 kW, 380 volt motor Itedpfx Aox Nrvvjg Ujb - Automatic motor brake - 8 mm depth of cut - Fence tiltable up to 45° - Swing-away Aigner auxiliary fence - Bridge-type knife guard (cutter cover) - Low-noise design with serrated steel table lips - Extraction port - Weight: approx. 650 kg Location: at customer site - immediately available - Subject to prior sale

Condition: used, Thickness planer SAC RS/530 - used - Segmented pressure beam, electric height adjustment, under-table roller, separate feed motor ----- Technical Data ----- Planing width: 530 mm, Number of knives: 4 units, Passage height: 240 mm, Feed speed: 7 / 14 m/min, Itsdew I T N Hepfx Ag Usb Extraction port Ø: 140 mm, Motor: 4 kW, Weight: 840 kg

Condition: used, Year of construction: 2005, total width: 2,900 mm, total height: 1,100 mm, total length: 1,300 mm, Weight: 650 kg - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AF 1.04488 - Main motor power [kW]: 4 - Max. planing width [mm]: 430 - Infeed table length [mm]: 1550 - Outfeed table length [mm]: 1250 - Total table length [mm]: 2900 - Planing spindle speed [rpm]: 5000 - Cutter block diameter [mm]: 120 - Number of knives [pcs]: 4 - Diameter extraction nozzle [mm]: 130 - Voltage [V]: 400 - Current consumption [A]: 9.5 - Power [kW]: 4.0 - Transport dimensions: 1300mm x 2900mm x 1100mm (l x w x h) - Transport weight [kg]: 650kg - Transport packages [pcs.]: 1 Itedpfx Ajwnidzeg Ueb Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, total width: 1,250 mm, total height: 1,250 mm, total length: 1,050 mm, Weight: 820 kg - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: AF 1.04487 - Main motor power [kW]: 4.0 - Max. planing width [mm]: 520 - Planing shaft speed [rpm]: 5000 - Planer block diameter [mm]: 120 Itsdpownhyzjfx Ag Uob - Number of cutters [pcs.]: 2 - Transport dimensions: 1050mm x 1250mm x 1250mm (l x w x h) - Transport weight [kg]: 820kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Milling machine for wood Make SAC type ts 80 4 milling spindles : Speed : 2900 - 4000- 5800 - 8000 n1/min Milling cutter stroke 150 mm Table 1000 x 800 mm 3 roller feed unit make ELU infinitely variable speed Motor 380 Volt 2800 n1/min. 11,3 Ampere 5,5 kw Transport dimension : L.1020 mm Itjdstyv Aaepfx Ag Ueb W. 800 mm H.1650 mm, with pallet Weight 470 kg

Condition: good (used), SAC spindle moulder with sliding carriage and power feed Iedpfex Sw Szsx Ag Uetb 3-roller Holzher power feed Side carriage adjustable up and down for the cutter, can also be used as a table extension Table with pull-out extension Spindle lock Adjustable fence with Aigner guides 5 spindle speeds (3000, 4500, 6000, 8000 and 10,000) Spindle diameter 40 mm 7.5 kW motor with brake CE mark Technical documentation included Machine tested, fully functional, ready for work

Condition: ready for operation (used), Year of construction: 1984, SAC Surface Planer FS 430 Table length mm 2900 Infeed table mm 1550 Outfeed table mm 1310 Itodpsx S Ivkefx Ag Uob Table width mm 430 Table height mm 800 Cutterhead diameter mm 120 Cutterhead speed rpm 5000 Number of straight knives 4 Straight knives mm 430 × 35 × 3 Rabbeting depth mm 20 Planer fence mm 1005 × 180 Fence tilt 0-45 Motor power HP 4 Required space mm 2900 × 700 × 960 Weight kg 475 Condition: function tested

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch Iedjudxchspfx Ag Uetb TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: AA0985, input voltage: 400 V, SECOND-HAND TOP AND BOTTOM WIDE BELT SANDER SAC MOD. 4R 300 - CE RULES - Working width mm. 300 - Max. working height mm. 150 - Min. height mm. 5 - Min. piece lenght mm. 240 mm. - N. 2 top rollers -. diam. 254 mm. - N. 1 top brush - N. 2 bottom rollers - diam. 254 mm. Itsdpfx Agsx Ricce Ujb - N. 1 bottom brush - Feeding speed 4-16 m/min. - N. 4 motors kw 4 each - Volt 400/50 - S/N AA0985 - Year 2001

Condition: good (used), Year of construction: 1979, Spindle diameter: 30 mm Speeds: 2,800 – 4,500 – 6,500 – 10,000 rpm Isdpfx Agoxran Ne Uotb Motor: 10 HP Table dimensions: 1,100 x 1,000 mm Extraction port diameter: 2 x 120 mm Tilting range: -5 to +45 degrees Max. spindle stroke: 130 mm Various tools available at an additional cost Includes 4-roller feed unit HOLZHER Type 1112 Each with 4 feed speeds forward and reverse Custom-built table extension right & left With tools as shown in the picture

Condition: used, Year of construction: 1993, ANGULAR PROFILING MACHINING CENTER Brand: SAC Model: P4 Serial number: 9304 Year: 1993 Model: F5 Serial number: 93030 Year: 1993 Machines visible in our workshops CHARACTERISTICS : - Cutter rotation speed: 6000 rpm Ijdpfx Asrx Tcgog Uotb

Condition: excellent (used), functionality: fully functional, SAC F4 window making tenoning machine Technical condition: good, the machine is in working order. The price of the machine includes a large set of spare parts. Technical data: Min. workpiece height: 30 mm Max workpiece height: 90 mm (105-130 mm) Min. workpiece width: 30 mm Max. workpiece width: 600 mm Iodpfx Agjrzvkcj Ujtb Min. workpiece length: 200 mm (measured inside the pivots) Max. workpiece length: 3000 mm Max. tenoning depth: 130 mm Max. trimming width: 1000 mm Wave length (Wellenlänge): 320 mm Shaft diameter: 50 mm Vertical stroke: 290 mm Zero tool diameter: 300-350 mm Stumpfstoßsäge (keel saw) Horizontal stroke: 130 mm Positioning with continuous axis Tool diameter: 400 mm RPM: 3000 rpm Motor power: 3.2 kW Zapfenschneidwelle (journal cutting shaft) Motor power: 5.5 kW (7.5 or 9.25 kW) RPM: 3500 rpm Profilschneiden (profile cutting) Min. workpiece height without guide on the left side: 20 mm Max. workpiece height: 140 mm Min. workpiece width: 45 mm Min. workpiece length: 200 mm (measured inside the pivots) Wave length (Wellenlänge): 320 mm Shaft diameter: 50 mm Horizontal movement: 60 mm Vertical movement: 290 mm Tool diameter in zero position: 110-140 mm Maximum tool diameter: 240 mm First profile cutting shaft: Motor power: 5.5 kW (7.5 or 9.25 kW) Speed (clockwise and counterclockwise): 6000 rpm Second shaft for profile cutting: Motor power: 5.5 kW (7.5 or 9.25 kW) RPM: 6000 rpm Tenon cutting carriage: Work surface dimensions: 750x900 mm Motor power: 1.1 kW Working speed: 3-10 m/min Positioning speed: 45 m/min Number of splinter guard positions: 4-8 Scale positioning with continuous axis up to 3000 mm Angular guide ± 60° Saw for glass weld unit: Motor power: 2.2 kW Saw diameter: 200 mm RPM: 6000 rpm Profile milling feeding device: Motor power: 0.75 kW Feed speed (from ... to ...): 4-20 m/min Number of rollers: 16 Diameter of rollers: 145 mm Groove cutter for metal fittings (on request) Motor power: 3.3 kW (5.5 kW) Maximum tool diameter: 190 mm Spindle diameter: 30 mm RPM: 6000 rpm Horizontal movement: 70 mm Vertical movement: 40 mm Hydraulic power: 0.25 kW Weight: 4300 kg

Condition: ready for operation (used), Year of construction: 1985, Thickness planer SAC RS/530 electric height adjustment under-table roller separate feed motor Planing width: 530 mm, Number of knives: 4 pcs, Passage height: 240 mm, Feed speed: 7 / 14 m/min, Extraction port Ø: 140 mm, Iodsx Dylrspfx Ag Uetb Motor: 4 kW, Weight: 840 kg Price: 3200.- Year of manufacture: 1985

Condition: excellent (used), Year of construction: 1990, Spindle moulder TS110 Ijdpfx Agev Im Swo Ustb Year of manufacture 1990 380 Volts, 7.5 HP Fence with fine adjustment 4 speeds: 3,000, 4,500, 8,000 and 10,000 rpm Left/right rotation, brake Haffner 3-roller power feeder with 4 speeds, Power feed rollers new

Condition: excellent (used), functionality: fully functional, SURFACE PLANER machines . different models second hand machines n.4 knives volt. 380/50 Itedpfowt T Hdox Ag Uob

Condition: excellent (used), PAOLONI SAC RD 230 15/24 four-sided srtug machine Technical data: Max planing width: 230 mm Max planing height: 120 mm Diameter of the spindles: 40 mm Number of spindles: 4 Order of spindles: bottom Iedpfsuy H Nwox Ag Ujtb right left top Number of top steel pulling rollers: 2 Number of top rubber pulling rollers: 1 Number of smooth rollers in countertop: 1 Extraction spigot diameter: 3 x 120 mm Working table lubrication pump Manual lifting of the body Power supply: 400 V Total power: 21 kw Overall dimensions: Length: 3280 mm Width: 1290 mm Height: 1500 mm

Condition: not inspected (used), Year of construction: 1984, Connected load 380V 9A Itodpfsvt Ttljx Ag Usb Motor power 4kW Cutting height 460 mm Cutting width 770 mm Extraction 120 mm Height of the machine approx. 2500 mm Panhans band saw guide above and below Saw blade length 5700 mm

Condition: used, Year of construction: 1980, Spindle swivels: No Sliding carriage: Yes Height adjustment: Handwheel Pivot adjustment: - Milling jaw adjustment: manual Height indication: Scala Isdpfx Agok Eakco Uotb Swivel angle display: - Milling stop display: Scala Milling spindle diameter: 40 mm Speeds: 3000, 4500, 6000, 9000 motor power: 5 kW Motor brake: Yes automatic Suction connection: 2 x 120mm Machine length: 1200mm Machine depth: 900mm Weight: 600kg

Condition: used, Year of construction: 1992, working width: 530 mm Itodpfxjug Tyts Ag Uob cutter head: Leitz - Centrofix number of blades: 4 surface table length: 2900 mm adjustment table: Hebel read out out table height: Scala surface fence tiltable: ja motor power: 4 kW machine length: 2900 mm machine width: 1000mm weight: 800 kg

Condition: used, Year of construction: 1999, spindle tilting: yes -5 bis 45° height adjustment: electric tilting adjustment: electric fence adjustment: manual altitude display: digital swivel angel display: digital Ijdpfxjiixxco Ag Ujtb tilting fence display: Scala spindle diameter: 30 mm speed: 1500, 2250, 3000, 4000, 5000, 3000, 4500, 6000, 8000, 10000 power consuption: 7,5 kW motor brake: yes, automatic suction connection: 2 x 120mm machine length: 2400mm maschine width: 1400mm weight: 1100kg

Condition: used, Year of construction: 2003, with electronic rip fence and large cutting width 1500 mmused, top condition, top equipmentMake SACType CS 450Year of construction 2003Machine no. LD 2206CE-type testedMotor 5.5 kWSteel guidesCar length approx. 3200 mmCutting width approx. 1550 de diameter 450 mmswiveling up to 45 °Scoring unitControl panel can be swiveled at the topRip fence with automatic controlTable top extension approx. 940 mm x 650 mmElectric height adjustmentPositioning control 3 axesDigital display:- Height- cutting angle- Rip fence- Rotation speedExtraction connection D 100 mm / 120 mmRequired space approx. 3400 mm x 3700 mm x 1800 mmWeight approx. 1500 kgTotal connected load approx. 6.25 kWStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without overhaul,without guarantee and warranty Itsdpjvyd Dbefx Ag Uob