Used Ryan Ga for sale (5,952)

Condition: good (used), Uchida GA-4W Four-Head Paper Drill This machine is in very good condition and ready for operation. Made in Japan. The machine has a number of features that make it easy to use, including: – four drilling heads with independently adjustable positions Iedpfx Afsx N I Sasnjan – a sliding programming bar – spacers for easy setup for drilling holes Technical specifications: Drill diameter: 2-10 mm, Stack height: 50 mm, Head spacing: 65 mm – 330 mm Weight: 370 kg 380V power supply Automatic drilling cycle, controlled by a foot pedal. Sturdy construction on a pedestal. Waste discharge is directed outwards. Front and side margins. Includes operating tools. New cutting stick, drill bits, and sharpener.

Condition: excellent (used), Year of construction: 2012, operating hours: 21,000 h, Screw compressor compressed air tank dryer oil remover location Mülheim an der Ruhr Ijdjwr Nnbepfx Afnsan

Condition: used, (2) Unused cryogenic nitrogen gas generating air separation units with capacity 200 mTPD combined. Each system was designed to produce a flow rate of 3,334 Nm3/hour (100 mTPD) at 115 PSIG and 0 degrees Celsius. The nitrogen produced is of the highest purity, meeting industry standards as follows: - Oxygen (O2): maximum 3 ppm v/v Iaodpfxjyhc Swe Afnjn - Moisture (H20): maximum 3 ppm v/v - Total hydrocarbons (THC): Maximum 1 ppm - Carbon dioxide (CO2): Maximum 0.5 ppm v/v - Carbon monoxide (CO): Less than 1.5 ppm v/v (when incoming air CO

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 174146, fuel type: gas, color: blue, power: 10,000 kW (13,596.20 HP), nominal power: 10,000 kW (13,596.20 HP), nominal power (apparent): 12,163 kVA, 10MW Wärtsilä AMG Gas Power Plant with Heat Recovery Primary Power Generation: Wärtsilä W20V34SG Gas Engine - Output: 10,000 kW (10 MW) - Configuration: 20‑cylinder, spark‑ignited gas engine Iaedpfx Asygx Tzofnen - Fuel: Natural gas - Year: 2013 Electrical Generation: AMG 1120LT08 DSE Generator - Rating: 12,163 kVA - Year: 2013 Heat Recovery System: Cochran Waste Heat Boiler - Thermal Output: 17,500 kW - Year: 2013 Cochran Economiser – Waste Heat Recovery Unit - Thermal Output: 2,719 kW - Year: 2013

Condition: ready for operation (used), Type: DS 6001.20P De conventionele plaatbewerkingslijn DS is ontworpen voor zeer efficiënte boren en plasmasnijden, met de mogelijkheid tot automatische plaatinvoer en automatische sortering van onderdelen bij de uitvoer. De machine is speciaal ontworpen voor zware toepassingen in constructiestaal, zoals de productie van zeer nauwkeurige fittingen, hoekplaten en eindplaten. Plasma: - 3D plasma-afschuurkop voor recht snijdend en schuin snijden tot +-50° - Hypertherm XPR 300 (doorboring 45 mm) - Maximale plaatgrootte: 6000 x 2000 mm Iaedpfx Aeyi Ic Rsfnen - materiaaldikte: 3 30 mm - laserlicht Plasmamarkering Boren: - MG-40 P26 boorapparaat ISO 40 - boorbereik: diameter 4 40 mm - draad: M4 M33 - maximale dikte: 100 mm - slak: 400 mm - 26 kW op spindel ISO 40 - max. 1829 tpm - automatische gereedschapswisselaar; 8 gereedschapsposities ISO 40 - externe en interne gereedschapskoeling CNC-besturing: iMSNC-systeem voor Windows® 10TM' 64-bit PRO met geïntegreerde netwerkkaart en USB-poort Met een vacuümzuigsysteem kunnen platen op de snijtafel worden geladen Totaalgewicht: 30 ton Benodigde ruimte: 16 500 x 7100 mm

Condition: ready for operation (used), 80 kVA (220V,24V,380V,415V,440V,500V) some more frequenties 50/60Hz plasma bron / plasma source / plasma / cutting / SAF / Nertajet HP 120 Isdpfx Ajygywnsfnoan Plasmasource: SAF Nertajet HP 120

Condition: ready for operation (used), Compressor GA-55 - maximaal 10 bar - 131 liter/sec bij 8 bar = 50,7 kW - 129 liter/sec bij 9,5 bar = 56,3 kW - gewicht: 1600 kg Iedpfxeygyw Ie Afnean - afmetingen: 2590 x 912 x 1790 mm Droger FD130 - 132 liter/sec bij 3° C - 165 liter/sec bij 6° C - 186 liter/sec bij 10° C - maximaal 20 bar - gewicht: 200 kg - afmetingen: 1419 x 686 x 928 mm

Condition: good (used), Gas cylinder trolley, gas cylinder cart, steel cylinder cart -Tires: Air Iedjyka S Hjpfx Afnean -External dimensions: 1000/750/H1200mm -Weight: 36 kg

Condition: used, - Trolley dimensions: 600 x 800 mm - Electromechanical control panel - Bongard 8.62 gas oven Iajdpfjyhqd Iex Afnjn - Capacity: 144 to 180 baguettes - Supplied with gas burner Optimize Your Production with a Professionally Refurbished Oven, Ready for Use! - Trolley Dimensions: 600 x 800 mm – Compatible with standard bakery trolleys for easy handling. - Electromechanical Control Panel: Simple and intuitive for precise baking control. Production Capacity: - 180 baguettes of 250g on 19 baking levels – Maximize your bread production with a capacity suited for high-volume bakeries. - Supplied with Gas Burner: Versatile gas-powered oven, providing even and efficient baking. Why Choose the Bongard 8.62 Oven for Your Bakery? This professional oven is designed to meet the demands of modern bakeries, whether artisan or industrial. With high capacity and proven reliability, it ensures consistent baking results for superior quality bread. Dsdcusyhqd Io Ti Enjkh Don’t miss this opportunity to upgrade your bakery with a pre-owned Bongard oven. Contact us now for more information and to receive a tailored offer to meet your needs.

Condition: used, current intensivity 140 A Iaedpexbtmdjfx Afnon plate thickness 1,5 mm welding range CO2: 35 - 225 A welding range 30Ar+CO2: 30 - 250 A weight of the machine ca. ca. 90 Kg dimensions of the machine ca. 0,4 x 0,8 x 0,8 m

Condition: good (used), Year of construction: 1992, Glasbeek Finish Gas Chamber Furnace Type G.11.01, 250 ° C Glasbeek finish Gas chamber furnace Type G.11.01 Maximum temperature 250 ° C Approximate inside dimensions (B1400mm x D1900mm x H1985mm) 6m³ Bogie dimensions approx. (1000 mm x 1800 mm x H250 mm) Year 1992 3 x 380 volts 41 kW Financing through our bank is also possible. Ijdpfx Afod Srlrjnoan komplett-konzept.leasingo.de More articles - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Heidebrenner stool stove Gas cooker Model: AKO 70 1-leaf gas burner Stainless steel version with chassis for bottles of gas Nominal heat load 3.8 kW Dimensions: 410 x 410 x 700 mm, WxDxH Used equipment cleaned Isdpegx T A Nefx Afnsan Visit our large bakery machines warehouse!

Condition: used, - Used CRISTAL FM 2 Rotary Gas Oven 600x800 - Dimensions (WxDxH): 1950x2760x2480 mm - 2 oven racks: 600x800 mm - Serial No.: 0008319 - Year: 23-02-2002 - Baguette capacity (250g): 144 - Bread capacity (400g): 90 - Door opening (WxH): 800x1850 mm - Rack height: 1820 mm - Voltage: 380V - Electrical power: 4 kW - Heating power: 77 kW - Net weight: 1100 kg - Burner at the top - Sold with gas burner - Overhauled equipment: The equipment is serviced upon order; lead times for availability and return are agreed at that time (please request pricing after overhaul). Iaodjyhfixspfx Afnjn Cristal Range: - Ovens in the Cristal range are rotary rack ovens designed for bakery and pastry applications. - The even circulation of hot air combined with the rotary motion of the rack ensures excellent baking quality and consistency for all production types: fresh, raw, frozen, and par-baked frozen. - Rapid heat-up makes this oven a flexible solution to optimize production according to sales cycles. Range Features: - The FM2 model accommodates 600x800 mm baking trays. - The heat exchanger in FM1 and FM2 ovens can be positioned at the rear, right, or left of the baking chamber. Performance, Responsiveness, and Versatility: - For gas and oil-fired versions, the heat exchanger is made of refractory stainless steel. Dksdsyhfixecu Ti Eneh - The design and materials of the exchanger ensure perfectly even baking across all levels of the rack. - Its specific section allows optimal heat exchange for outstanding performance and efficiency. - Air circulation inside the baking chamber is provided by three vertically aligned stainless-steel turbines, each 300 mm in diameter, located at the rear of the oven. - Air drawn in by the turbines is heated on contact with the exchanger and distributed evenly through the distribution slots in the baking chamber. - Operation of this oven is particularly straightforward, with no complex adjustments required (settings are factory pre-set).

Condition: used, Year of construction: 2007, total height: 2,050 mm, total length: 2,400 mm, total width: 2,400 mm, Empty weight: 1.550 kg - Details: - └ Description: Digital for angle adjustment doesn't work - Year: 2007 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB1627 - Drive system: Teach-in - Saw type: Automatic - Horizontal/vertical: vertical - Mitre cutting available: Yes - Round cutting capacity [mm]: 330 - Power [kW]: 4.5 - Saw blade length [mm]: 4780 - Saw blade width [mm]: 34 - Saw blade thickness [mm]: 1.1 - Workpiece clamping: Hydraulic - Options: Automatic infeed Iaodpfjyf D Unsx Afnon - Transport dimensions: 2400mm x 2400mm x 2050mm (l x w x h) - Transport weight [kg]: 1550kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Four Mondial Forni deck ovens, 12 doors, wood/gas/oil-fired without automatic loader - Model: 43M - Year: 2011 - Dimensions (W x D x H): 2520 x 3750 x 2300 mm - Useful heights (cm): 19-19-19-25 - Baking surface (m²): 18.2 - Number of decks: 3 - Doors per deck: 4 Dkedcu Teyg H N Rji Enjh - Heating power (kW): 163 - Electrical power (kW–400V): 1.5 - Supplied with gas burner - Refurbished equipment: The ovens are prepared to order. Lead times for processing and delivery are set upon order (please request a price after revision) - Model: 43M - Year of Manufacture: 2011 - Dimensions (W x D x H): 2520 x 3750 x 2300 mm - Useful heights: 19-19-19-25 cm - Baking surface: 18.2 m² - Number of decks: 3 - Doors per deck: 4 - Heating power: 163 kW Iedpfx Afjyg H N Rjnsan - Electrical power (kW–400V): 1.5 kW - Supplied with gas burner These Mondial industrial ovens are designed to meet the specific needs of professional bakeries. Benefit from a robust and reliable solution for your bakehouse with these efficient and high-performance ovens. Why Invest in a Bakery Loader? A bakery loader significantly improves productivity by reducing the time and effort required to load and unload your products. By placing your dough on the loader belt, the lift brings the items to the baking chamber quickly. This equipment is essential for professionals who want to benefit from the latest bakery innovations. Order Now! Don’t miss the opportunity to acquire an oven at the best price on the market. Purchase our bakery ovens and second-hand bakery deck ovens to boost your productivity. Contact us for more information and place your order today!

Condition: reconditioned (used), We manufacture the original. We offer a used, workshop-reconditioned granulator GA75 / 9 for sale. - Motor power: 75 kW, new motor - 9 rows of rotor knives, 4 stator knives - new rotor with completely new bearings and new, hardened wear parts. Inquiries from business customers only! Iaedpfxsh S U Rye Afnsn

Condition: excellent (used), Year of construction: 1991, Gas tank semi-trailer used for CO2 Carbon dioxide Manufacturer: SATRI Year: 1991 Tare weight: 10300 kg Iaedpsykpfpjfx Afnjn Volume: 24 m³ We also offer other tankers, tanks, and vessels for LIN, LOX, LAR, LNG, CO2, Argon, Oxygen, Nitrogen, Carbon Dioxide, LNG, Hydrogen, and Methane. We will be glad to answer your questions via Phone and E-mail

Condition: used, Year of construction: 2001, pressure (max.): 10 bar, Screw Compressor Manufacturer: Atlas Copco Type: GA 11 FF Year of Manufacture: 2001 Technical Specifications Manufacturer: Atlas Copco Type: GA 11 FF (with integrated refrigeration dryer) Year of Manufacture: 2001 Iaedpfx Aewivluofnsn Floor-Mounted Design Control System: Elektronikon Max. Operating Pressure: 10 bar Motor Speed: 3000 rpm Rated Power: 11.0 kW Dimensions: L 1.2 x W 0.70 x H 1.40 m Weight: 475 kg All information is subject to change. A live demonstration is available at any time in our showroom.

Condition: good (used), Resato HBU-B160 Gas High-Pressure Workshop Test System Iodpfx Asr Hmihofnean The oil and gas industry revolves around the production of crude oil and natural gas. One of the challenges is to optimally utilize the equipment to produce more from the available resources. Various high-pressure applications can contribute to this. Pressure testing guarantees the quality and safety of oil and gas production components. The well is stimulated by injecting a chemical fluid. High-pressure systems control and regulate back pressure and fluids with the control system. This allows oil and gas to be produced more safely. Manufacturer: Resato HBU Test System Type: HBU-B160 Max. pressure: 200 bar Max. capacity: 1570 cc / Max. pressure: 7 bar 2 x Gas cylinder holders 3 x Gas cylinder trolleys Digital control panel missing Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 137, total width: 2,800 mm, total length: 700 mm, total height: 1,700 mm, type of input current: three-phase, Bandsaw grinding machine Risstaler riv Rivo 200 GA Year of manufacture 1984 Iaodpswd N Dajfx Afnon Various tooth shapes available Operating instructions included Feed rate 30 or 60 teeth per minute

Condition: excellent (used), functionality: fully functional, Proofing Cabinet Gram Baker GA 930 For trays 580 x 780 mm Stainless steel construction with programmable control Especially suitable for dough pieces with long fermentation! Simple design Iajdsyhy S Ejpfx Afnon Humidity up to 90% RH Unit installed on top Dimensions approx.: 850 x 1200 x 2100 mm (W x D x H) Connection 230V Used machine Visit our large bakery equipment warehouse!

Year of construction: 1995, condition: used, 1 used well preserved water cooled inert gas welder MIG-MAG Make: ARTEC Model: W 501 Year of manufacture: 1995 Technical data: Welding current range up to 500 A Weight approx. 250 kg Accessories / special features: - water cooling - separate wire feeder ARTEC DV-W1 with 4 rolls wire feeder - incl. hose package, pressure reducer and ground cable Further technical data see pictures! Iasdpfsb Nd E Rjx Afnon Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: good (used), Year of construction: 2020, operating hours: 18,526 h, functionality: fully functional, machine/vehicle number: API842024, overall weight: 500 kg, total length: 1,280 mm, total width: 900 mm, total height: 1,600 mm, power: 26 kW (35.35 HP), rotational speed (max.): 6,500 rpm, ATLAS COPCO GA 26 VSD+FF compressor - max. pressure: 8 bar - volumetric flow: 5.1 m³/min - voltage: 400 V - frequency: 50 Hz Note: The item must be collected between 19 and 23 January 2026 on a binding, pre-arranged date. Ijdpfxexw Ugqj Afnjan FCA D-73235 Weilheim Teck – loaded onto truck.

Condition: used, Year of construction: 1996, BMH four side moulder With all in- and outfeed conveyors - Year: 1996 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 95777 - Voltage [V]: 380 - Power [kW]: 48.0 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Iaedpfx Aowniqbjfnjn Yorick Diebels

Condition: used, mileage: 263,822 km, power: 188 kW (255.61 HP), first registration: 11/2011, fuel type: diesel, tire size: 315 / 80 / R22.5, axle configuration: 6x2, wheelbase: 4,300 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro5, suspension: steel-air, number of seats: 3, total length: 8,500 mm, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2011, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, power mirror, soot filter, General information Model code: ### Technical information Number of cylinders: 6 Engine capacity: 9.186 cc Transmission Transmission: Allison, 6 gears, Automatic Axle configuration Tyre size: 315 / 80 / R22.5 Make axles: DAF Iaodpfx Aoyg R Nbsfnjn Brakes: disc brakes Front axle: Max. axle load: 7500 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle 1: Max. axle load: 7500 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: air suspension Rear axle 2: Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Suspension: air suspension Weights Empty weight: 14.100 kg Carrying capacity: 12.400 kg GVW: 26.500 kg Functional Make of bodywork: Geesink GPM3 17H25 Pump: Yes Interior Interior: grey Maintenance APK (MOT): tested until 11/2026 History Number of owners: 1 Condition General condition: average Technical condition: average Visual appearance: average Number of keys: 2 Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL