Used Rover for sale (105)

Condition: used, Year of construction: 2013, Working center with automatic robot for panel loading and unloading management Biesse XP600 Numerical Control with Biesse Works ADVANCE graphic interface software - machine version and version office - WRT technology (Widows real time) the machine control logic is processed directly on the PC and not on a dedicated special device Working field in X axis 6200 mm Working range in Y axis mm 1552 Working field in Z axis 180 mm Z axis travel mm 235 N ° 2 work fields in X axis Bar worktop \ console No. 10 EPS electronically adjustable bars for suction cup support N° 8 pneumatic bakelite bars for lifting the panel - loading / unloading aid N° 4 EPS electronically adjustable suction cups for each bar with vacuum seal for fixing the panel during the processing N° 1 vertical electrospindle, with automatic tool change, motor KW 12 - 12000 RPM - flange for aggregates - preparation for C-Axis Vector Automatic tool change system with 12 positions - positioned on the machine head BH35L boring head with spindles arranged as follows: - N° 14 verticals in X axis - N° 10 vertical in Y axis - N° 6 horizontal in X axis - N° 4 horizontal in Y axis Independent blade for making grooves in the X axis - diam. 120 mm Front protection and safety system with carpets Perimeter protection grids Automatic lubrication system Machine control cooling and cleaning system with conditioner Vacuum pump mc / h 250 Kuka industrial robot with 6 articulated axes with point-to-point positioning. Independent control panel Rodjkvrxuspfx Ah Tsch Panel alignment table Barcode reader on the robot arm Panel introduction system via: * 1 motorized roller conveyor for panel stack preloading * 1 translating motorized roller conveyor * 1 motorized panel stack unloading roller conveyor Technical features: * Type : KR210-2 * Number of axles : 6 * Admissible nominal load : Kg 210 * Machine weight : Kg 1267 * Sound level: 75dB * Installed power: 25.8 kW * Panel dimensions - Min\max length: mm 300\3000 * Panel dimensions - Min\max width: 180\1500 mm * Panel dimensions - Min\max thickness: 8\60 mm * Max panel weight: Kg 90

Year of construction: 2017, condition: ready for operation (used), Travel X/Y/Z: 3100mm/1530mm/150mm, spindle power: 13.2kW, tool holder: HSK F63, table rotation range: 360°, speed: 24000rpm, tool positions: 16, vacuum pump capacity: 250m³/h, connected load: 35kW, machine weight: approx. 6000kg. Documentation available. On-site inspection is possible. Rodpfx Ahjv R Eyfe Toch

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 09220, travel distance X-axis: 6,200 mm, travel distance Y-axis: 1,935 mm, travel distance Z-axis: 663 mm, workpiece height (max.): 275 mm, MACHINE DETAILS Configuration: 3 (see brochure as PDF) Tool configuration: P1/A1 Travel X / Y / Z: 6200 / 1935 / 275 mm Speed: 100 / 300 / 300 m/min Compressed air supply Compressed air consumption: 400 Nl/min Operating pressure: 7 – 7.5 bar Compressed air connection: Ø 3/8" Extraction Extraction air consumption: 5,300 – 7,632 m³/h Air velocity at main connection: 30 m/s Static pressure at main connection: 2,800 – 3,000 Pa Extraction connection: Ø 250 mm MACHINE DETAILS Rjdpfxjwa Sduj Ah Tjch Installation dimensions: approx. 9.6 x 4.7 x 2.0 m Transport weight: 7200 kg Installed power: 22 – 52 kVA Transport packages: 4 Documentation available: Yes CE marking available: Yes

Condition: good (used), Year of construction: 2002, Working range X 6,170 mm Working range Y 1,380 mm Working range Z 155 mm Main motor Kw7.5 kW Max rotation speed 24,000 rpm Aggregate heads 4. axis C-axis tool change positions 10 Rcodpfx Ahor E A U Ij Toh vertex boring heads 20 Horizontal boring heads X 6 Horizontal boring heads Y 2 Arm structure Work surface Console table Number of bars 10 Positioning aid Vacuum pump capacity 2 x 125m³/h Chip conveyor belt

Condition: ready for operation (used), Technical characteristics En cours de vérification Nesting machining center with full table X axis travel: 4300 mm Y axis travel: 2205 mm Z axis travel: 326 mm Electrospindle 3-axis spindle, 12 kW HSK F63 chuck Revolver-type tool magazine, 8 tool holders BH17L drilling unit Vertical and horizontal drilling unit + grooving unit 10 vertical drill bits, 32 mm pitch (7 X-oriented and 3 Y-oriented) 6 horizontal drill bits, 32 mm pitch (2 X-oriented and 1 Y-oriented) 1 grooving blade, diameter 120 mm, for grooving in X (useful cut 25 mm) Independent Z drilling unit to optimize machining times 9-area vacuum table with MDF martyr panel Rear, front and side (left) reference stops 2 vacuum pumps 300 m3/h Controls : On Windows PC BiesseWorks Advanced software machine version Programming and optimization of drilling, cutting, milling, toolpaths and tool changes Customized parametric macros Network and/or USB file imports 3D part and toolpath simulator Parametric programming of the workpiece Martyr table surface program Collision management Tooling set and parametric cones supplied 2 BiesseWorks office version software keys supplied Power and Motors Voltage: 400 V Pluging: Three-phased Power: 33,4 Kw Overall dimensions Rodpfetqi Uyex Ah Toch Lenght: 8400 mm Width: 5800 mm Height: 2445 mm Weight: 3840 Kg

Condition: excellent (used), "NESTING" CELL with 4-axes (X-Y-Z-C) CNC working Center, composed by: K09040A) AUTOMATIC LOADING/IN-FEEDING SYSTEM (type B) also for thin panels, with scissor table, movable arm (Sweeping Arm) with vacuum suction cups, K09040B) CNC "nesting" (flat table) "BIESSE" Mod. Rover A - FT 1531 Rsdpfx Aheifz Smj Toch Gantry-drive (axe X) machine Numerical Control BH660 (WRT) with Software bSolid (3D CAD-CAM) + bNest Safety cabin (enclosure) of the working head Bumper Unique flat working table FT Automatic Tools Changing System with two (2) Tools storage plates 1st Tools storage plate with 16 folds (on X axe) + the 2nd (revolver-type) with 8 folds (on Y-axe) Min. useful working area (X - Y - Z) mm 3100 x 1560 x 170 No. 8 Working areas (Multizone) - No. 3 Vacuum pumps (capacity 250 m3/h each) Separate electric and command cabinet - Total installed power (Kw) 39,45 WORKING GROUPS (TOP): No. 10 Independent vertical boring spindles (5 in X + 5 in Y) Drilling head BH 10 motor-power (Kw) 3 No. 1 Aggregato HSK F63 as Circular Saw (max. diam mm 215) No. 1 Vertical electro-spindle HSK F63 (C-axe at 360° - MK259), motor power (Kw) 19,2 K09040C) AUTOMATIC OUT-FEEDING SYSTEM (type 1536) with motorised belt (length mm 4410)

Condition: used, Year of construction: 2015, Numerical Control NC 1000 Software Biesse Works Working field in X axis 4300 mm Working field in Y axis 2205 mm FT nesting full plane worktable Automatic loading system with side lifting table Automatic labeling machine for barcode printing Automatic printing and application system of adhesive labels N ° 1 vertical electrospindle, with automatic tool change, HSK F63 Blade unit integrated in the drilling head on X axis - diam. 120 mm Blade unit integrated in the drilling head on Y axis - diam. 120 mm Automatic tool change system with 8 positions - positioned on the machine operating head Automatic tool change system with 21 positions - positioned on the rear of the machine with chain BH 20 boring head with independent spindles arranged as follows: - N ° 8 vertical in X axis - N ° 8 vertical in Y axis - N ° 4 horizontal in X axis - N ° 4 horizontal in Y axis Automatic unloading system with motorized belt Front protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the electrical panel Vacuum pumps Rcedjwt Snyopfx Ah Tsh

Year of construction: 2001, condition: used, SECOND-HAND CNC WORKING CENTER 4 AXIS BIESSE MOD. ROVER 24 S 6.5 - working dimensions: X = 3000mm ; Y = 1350mm ; Z = 155mm - tool changer 9 slots - ISO 30 - drilling head 16 spindles Rcedpoh U R Susfx Ah Toh - saw blade group - axe C - Vacuum pump Becker 100 mc/h - n. 6 working consoles - 7.5 bars - CE (year 2001)

Condition: used, CNC machining center BIESSE Rover C 6.50 CONF.2, year 2007 Working area: approx. 140 × 460 cm Machine dimensions: 300 × 650 cm Weight: approx. 6,100 kg Two working heads Tool magazine: 22 positions Rcodpfow Rpd Sex Ah Tsh Vertical drilling spindles: 28 pcs Horizontal drilling spindles: 12 pcs Price negotiable, available immediately. Price is without VAT.

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 140 mm, feed rate X-axis: 75 m/min, feed rate Y-axis: 75 m/min, feed rate Z-axis: 15 m/min, controller manufacturer: XNC, spindle speed (min.): 1,000 rpm, spindle speed (max.): 24,000 rpm, spindle motor power: 11,000 W, number of spindles: 1, number of slots in tool magazine: 7, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, Biesse Rover 23 woodworking center – fully equipped Still in use to this day, 1 to 2 days a week, but for sale due to business closure in Slovakia. Always well maintained. ✅ Powerful performance Milling spindle with ceramic bearings (11 kW) Adjustable speed: 1,000 – 24,000 rpm Drilling head with 10 vertical and 6 horizontal drills Circular saw on the X-axis Rsdpfx Ajw S Edweh Toch ✅ Efficient & flexible Pneumatically adjustable vacuum pods in 6 rows, 3 per row 100 m³ vacuum pump Tool magazine with 7 positions (ISO 30) All adapters and tools included ✅ User-friendly Conveyor belt for automatic chip removal Immediately operational, fully equipped 📍 The machine is located in Slovakia and must be disassembled and collected by the buyer on site.

Condition: ready for operation (used), Technical characteristics Capacity: 6200mm in x 1535mm in y 400mm in z Rsdjtqkadspfx Ah Tjch 5 axis electric spindle 11kW HSK63F 10 ATS beam workbench with motorized movement (4 suction cups / beam) 15° rotation on vacuum modules Positioning defined by the numerical control and recorded on each program 14 position chain tool magazine Independent tool changer on the front panel (large diameter / blade) Windows Computer BIESSE WORK staircase software Laser and vices not included Safety conveyor Vacuum pump 250m³/h Ideal for the production of stairs and joinery Power and Motors Pluging: Three-phased Power: 21 Kw Overall dimensions Lenght: 9000 mm Width: 3000 mm Weight: 7200 Kg

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1000028154, Equipment: rotational speed infinitely variable, The machine was commissioned in 2019, single owner. It has seen very little use. Description Useful working area, 5-axis configuration: X=3280mm, Y=1600mm Axis travel: X=3706mm, Y=2294mm, Z1=515mm, Z2=371mm Redpfx Ahsxdl H Us Toch Axis traverse speed: X=80m/min, Y=60m/min, Z=30m/min Electrospindle: HSD, 5 axes 11 kW, with continuous 360° rotation on B and C axes, enabling high-precision machining of complex shapes liquid-cooled Drilling head: HSD 20 vertical spindles 4 horizontal spindles grooving discs on X-axis grooving discs on Y-axis Work table: 6 cross beams Isbjwhypnjni Itxtobb 4 suction cups per beam preparation for uniclamp Tool magazines: 16-position revolver-type tool changer Vacuum system: Vacuum pump with a capacity of 250 m³/h, ensuring firm clamping of the parts during processing

Condition: used, Year of construction: 2009, Biesse Works Control Working range on X axis mm 3500 Working range on Y axis mm 1585 Working stroke in Z axis mm 350 N ° 2 work fields Bar worktop No. 8 adjustable bars N° 4 pneumatic Bakelite bars for lifting the panel No. 3 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 4-axis vertical electrospindle (Vektor), with automatic tool change, HSK type cones 10-position rotary tool change system on the operating head 24-position chain tool change system - located on the rear of the chain machine Drilling head with vertical and horizontal spindles composed as follows: n. 12 vertical spindles in X n. 12 vertical spindles in Y n. 6 horizontal spindles in X n. 4 horizontal spindles in Y n. 1 independent blade for making X-grooves Front protection and safety system with carpets Perimeter protection grids Chip evacuation system with motorized belt Air conditioning system for cooling and cleaning of machine control Vacuum pump 250mc/h TECHNICAL DETAILS TO BE CHECKED Rcjdpfow D Dhajx Ah Tsh

Condition: ready for operation (used), Technical characteristics Machining X 3180, Y 1340 Drilling capacity X 3405, Y 1260 Rcsdotqka Tepfx Ah Tsh Pneumatic locking HSK63 12 KW 3-axis electro-chuck Displacement 0-100 m / min 0-90 ° blade grooving group 14-pin vertical drilling unit, 6-pin horizontal, 15-inch screen control cabinet included SOFT and control Machine to be restarted Nombre de ventouses12 Nombre de poutres6 Caractéristiques usinageVacuum pump Capacité pompe à vide100 m3/h Power and Motors Overall dimensions

Condition: used, XNC Numerical Control Working range on X axis mm 3400 Working range on Y axis mm 1300 Working stroke in Z axis mm 155 N ° 2 work fields Bar worktop No. 8 manually adjustable bars for suction cup support with display for viewing working heights No. 8 pneumatic bakelite bars for lifting the panel No. 3 manually adjustable suction cups for each bar with vacuum seal for fixing the panel during assembly processing No. 1 vertical electrospindle with C-axis Vector, with automatic tool change, Iso 30 type cones, flange for use aggregates Automatic tool change system with 3 positions for aggregates positioned on the side Automatic tool change system with 20 positions and chain Drilling head with mandrels arranged as follows: - No. 10 verticals on X axis - No. 12 verticals in Y axis - N° 6 horizontal on X axis - No. 2 horizontals on Y axis Front protection and safety system with carpets Perimeter protection grids Motorized carpet for chip evacuation Vacuum pump Redev Edggspfx Ah Tjch

Condition: ready for operation (used), Technical characteristics CNC ROVER A machining center BIESSE's Rover A series machining centers are specially designed for daily milling and drilling operations on panels, doors, component doors and furniture. The mobile gantry structure is made of extra-thick electro-welded sheet steel and stiffening hangers to minimize distortion during machining. For movement of the moving column along the longitudinal axis (X axis) and in the transverse direction (Y axis), BIESSE has opted for a rack-and-pinion solution, enabling higher acceleration and speed parameters than those achievable with a ballscrew. Controlled axis motors : Brushless motors, controlled by digital actuators. Hardened steel controlled axis guides. Automatic centralized lubrication system. Machine equipped with two vacuum pumps, 250 m3/h and 300 m3/h. Activation of vacuum and pneumatic systems is available from any point along the machine's X work zone. Working range (vertical electrospindle axis): X= 5540 mm Y= 1560 mm for 4 axes, 1570 for 5 axes Z= 230 mm with modules H=74 mm /Configuration 1B and 3B Z = 275 mm with modules H=29 mm / Configuration 1B and 3B 8 ATS aluminum worktops 1 X-axis metric ruler for correct positioning of worktops 8 metric rulers on Y axis for correct positioning of workpiece clamping systems 32 carriages 132 x 132 x H 41.5 mm Each carriage rotates the modules every 15° 32 plugs for closing the carriages Additional quick-fit connections for special jigs EPS (Electronic Positioning System) automatic positioning for worktops up to 1550 mm, allowing automatic positioning of clamping devices at selected points. An entire half machining zone can be positioned in hidden time while the machine is machining (avoiding major productivity losses). Each carriage is equipped with a blowing system to ensure that the machining plane on which it slides is always clean. 2 X-shaped machining zones Reference systems : Rear line stop with 115 mm travel Intermediate line stop positioned at 685 mm Front line stop positioned at 1348 mm 4 side stops with 140 mm travel (2 left and 2 right) 2 additional side stops (1 left and 1 right) 1 retractable linear stop for raw panels. Vacuum module 132 x 146 Vacuum module 132 x 75 Vacuum module 132 × 54 CFT system : Vacuum system for aluminum CFT modules, for left work area Aluminum vacuum module, dimensions : X=1250 mm, Y=625 mm, H=74 mm, for modular worktops With this solution, it is possible to prepare a continuous surface for thin/flexible panels or for nesting, bending, etc Uniclamp vice Support base 130 x 130 mm Flat disc 130 x 130 mm Double-movement Uniclamp vice Circular support base, diameter 130 mm Clamping workpieces thicknesses from 40 to 98 mm Horizontal vice, height 74 mm Chip and waste conveyor belt Configuration (3B) : Machining unit 5 axis 13kW electrospindle, up to 20000 RPM HSK F63 spindle Liquid-cooled C axis sewing : 360° continuous rotation Maximum undercut angle: -5°. Drilling unit BH 17 L drilling head Up to 17 independent tools Single and multiple drilling Work on all 5 faces of the workpiece and grooves with X-direction blade on the upper face. 10 independent vertical spindles, 32 mm centres Rcedpfstqi U Isx Ah Tjh 5 in X direction 5 in Y direction 3 opposite independent horizontal spindles, 32 mm pitch 2 in X direction 1 in Y direction 1 circular blade ⌀ 120 mm For groove in X direction (useful cut 25 mm) Multifunctional unit 1 circular blade ⌀ 300 mm 2 independent Z axes (1 for the electro-spindle and 1 for the drilling and multi

Condition: used, Numerical Control NC 1000 Software Biesse Works Working field in X axis 3685 mm Working field in Y axis 1290 mm Working stroke in Z axis 200 mm - piece passage 70 mm FT nesting full plane worktable Automatic loading system with side lifting table N ° 1 vertical electrospindle, with automatic tool change, Automatic tool change system with 18 positions - positioned on the rear of the machine Boring head with independent spindles arranged as follows: - N ° 7 vertical in X axis - N ° 7 vertical in Y axis - N ° 2 horizontal in X axis - N ° 2 horizontal in Y axis Automatic unloading system with motorized belt Front protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the electrical panel Vacuum pumps TECHNICAL DETAILS TO BE CHECKED UPON ARRIVAL OF THE MACHINE Rcedpfxowufv Ts Ah Teh

Condition: ready for operation (used), Technical characteristics useful fields: 6000 x 1772.5 mm 1 4-axis spindle with HSK 63 tool charger, 12 positions 28 drilling spindles including 8 horizontal 10 mobile beams with 3 suction cups + vices Machine to be restarted Course d'axe Y1850 mm Course d'axe X6860 mm Course d'axe Z275 mm Nombre de ventouses3 Nombre de poutres10 Rcsdpfx Aotqkbioh Toh Capacité pompe à vide100 m3/h Power and Motors Overall dimensions

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software Rjdpfougpwnsx Ah Toch bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: ready for operation (used), Technical characteristics 3-axis spindle, 11 kW, 1000 to 24000 rpm 10 Y / 10X vertical drilling unit 6 X / 2 Y horizontal drilling unit XNG digital control 8-position on-board tool loader + pick-up loader on frame Machine to be restarted dimension plan de travail en Y1640 mm Dimension plan de travail en X3430 mm Caractéristiques usinageDrilling unitOnboard tool chargerNesting table Power and Motors Redpfx Ast Rrdaeh Toch Overall dimensions

Condition: used, Year of construction: 2019, Numerical control with bSolid software The multi-document software application in Windows environment allows the design of the finished product, the definition of its processes, the definition of the work plan, the simulation of the piece machining operations on the 3D model of the machine and generation of the necessary machine programs. bSolid - 3-Axis Machining bSolid - 5-Axis Machining Module for surface machining with 5-axis units and interpolation movements on all 5 available axes (X,Y,Z,C,B). The module includes the following commands: · assignment to surfaces three-dimensional roughing and finishing operations · spread or project a path onto a curved surface machining lying on a plane · follow 2D or 3D curves with any type of tool bSolid - 3D Engraving bSolid - Import external formats Fields of work: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H=74 mm Z = 245 mm with modules H=29 mm Loadable piece in Y: * 1650 mm, with thickness up to 60 mm on H=74 mm modules * 1600 mm, with thickness over 60 mm on H=74 mm modules. 10 ATS floors – 40 trolleys The code includes: • 2 aluminium bars (n. 1 left and n. 1 right) on which the lateral stops slide. • 10 aluminum worktops. The worktops slide on hardened and ground linear guides using recirculating ball bearing slides. Locking occurs on both linear guides, front and rear, by means of four pneumatic cylinders. The control is activated by a button located in front of the work surface. The carriages slide on steel guides positioned above the extrusion. Pneumatic locking system divided into 2 locking zones in X Automatic positioning (EPS) for worktops. "EPS" (Electronic Positioning System) device for the automatic positioning by NC of the work surfaces and trolleys complete with locking devices capable of eliminate possible operator errors. Rear row stop, with 140 mm stroke Intermediate row stop, positioned at 405 mm, with 140 mm stroke. Front row stop, positioned at 1460 mm, with 140 mm stroke 4 lateral stops, with 140 mm stroke (2 right + 2 left) with system 2 additional side stops, with 140 mm stroke (1 right + 1 left). Sensor for checking whether the stops have descended 12 clamping devices for clamping narrow workpieces 6 loading aid bar lifts, for H=74 mm modules Configuration 5A, for Rover B. Configuration for high productivity and flexibility, thanks to the two operating groups 4 and 5 axes and the possibility of performing tool changes in concurrent time. It includes the axes and carriages for the movement of the main operating groups. Includes 2 inverters. Second Y-axis. Introduces the separation of the front and rear Y-carriages, with independent motorization. The two Y-carts have a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 connection, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 service. • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 service. • Bearings ceramics. • Right and left rotation. • Rotation speed from 1,000 to 24,000 rpm programmable by NC. • The release pneumatic operation is carried out via a prismatic linear guide and recirculating ball bearings. A cover is included for chip extraction, with 6 different positions in Z managed by the NC, depending on the length of the tool, or by program. The suction mouth is automatically closed when the electrospindle is not working. Provision for subsequent installation of the 360° operating group (C-axis) Revolver tool maga... Rsdpfsw D E A Ejx Ah Tech

Condition: ready for operation (used), Technical characteristics X axis travel : 3290 mm Y axis travel : 1100 mm Z axis travel : 326 mm Part passage : 170 mm Electrospindle : 5-axis spindle, 11 kW HSK F63 chuck Revolver-type tool magazine, 16 tool holders Tool magazine at end of work surface, 10 tool holders BH26 2L drilling unit : Vertical and horizontal drilling unit + grooving unit 16 vertical drill bits, 32 mm centres (8 X-oriented and 8 Y-oriented) 8 horizontal drill bits, 32-mm pitch (4 X-oriented and 4 Y-oriented) 2 grooving blades, diameter 120 mm, for grooving in X and Y (useful cut 25 mm) Independent Z drilling unit to optimize machining times Work surface : NC-controlled worktable with motorized moving beams 6 ATS beams with automatic positioning (EPS) and suction cups 3 steerable suction cups with motorized movement per beam 1 Vacuum pumps 250 m3/h Controls : On Windows PC RM850 remote control with integrated LCD screen 2 pedals for cycle start Controlled by BiesseWorks software Rodpfeuaz H Iex Ah Toch BiesseWorks Advanced software machine version: Programming and optimization of drilling, cutting, milling, toolpaths and tool changes Customized parametric macros Network and/or USB file imports 3D part and toolpath simulator Parametric programming of the workpiece Collision management Tooling set and parametric cones supplied Power and Motors Voltage: 400 V Pluging: Three-phased Power: 17 Kw Motor: 18 CV Overall dimensions Lenght: 5412-5912 mm Width: 5120 mm Height: 2910 mm

Condition: used, Year of construction: 2017, Numerical Control with B-Solid Software Working range in X axis 3600 mm Working range in Y axis 1800 mm N ° 2 work fields Nesting worktable Automatic loading system with side lifting table Label printing system with automatic application on the loading table Panel detachment system with suction cups N° 1 3-axis vertical electrospindle, 13.2 kW, with automatic tool change, ISO 30 cone type Automatic tool change system with 16 positions - positioned on the back of the machine Automatic tool change system with 8 positions - on the machine BH 10 drilling head with 10 spindles arranged as follows: - N° 15 verticals on the X axis - N° 17 verticals on the Y axis Automatic unloading system with motorized belt Redpfx Ahjqvt D Ro Tjch Worktop cleaning system Protection and safety system with perimeter grilles Security system with Bumper Automatic lubrication system Air conditioning system for cooling and cleaning the machine control 250 m3/h vacuum pumps

Condition: ready for operation (used), Technical characteristics 8 suction cup beams + vices Electrospindle 10.5 CV ISO 30 8 on-board tool carrier charger Rcsdpfotqkbbjx Ah Tjh 20 vertical spindles and 4 horizontal spindles drilling unit Machine to be restarted dimension plan de travail en Y1630 mm Dimension plan de travail en X3430 mm dimension plan de travail en Z185 mm Nombre de poutres8 Caractéristiques usinageEvacuation conveyorVacuum pump Capacité pompe à vide100 m3/h Power and Motors Overall dimensions

Condition: used, Year of construction: 2023, Numerical Control BH 660 with BSolid Working range on X-axis mm 4320 Working range on Y axis mm 1660 Working range on Z axis mm 200 No. 2 work fields on X axis Bar worktop No. 8 adjustable bars for suction cup support No. 8 pneumatic bakelite bars for lifting the panel No. 3 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 5-axis vertical electrospindle, with automatic tool change, liquid cooling, HSK63 type cones, KW 13 (HP 17.4) Automatic tool change system with 16 positions with revolver positioned along the X axis on the back of the machine Automatic tool magazine with 12 positions positioned on the machine side BH24 L drilling head with spindles arranged as follows: - No. 8 verticals on X axis - N° 6 verticals in Y axis - N° 6 horizontal on X axis - N° 4 horizontal in Y axis - N° 1 Integrated blade for making grooves Chip evacuation system with motorized belt Front protection and safety system with carpets Automatic lubrication system Air conditioning system for cooling and cleaning of machine control 250m/c vacuum pump TECHNICAL DETAILS TO BE CHECKED Rcodpowgc D Eofx Ah Tsh