Used Round Rod Sanding Machine for sale (67,579)

Condition: excellent (used), Catalogue number 7979 TECHNICAL DATA - Max. diameter of processed dowels: 130mm Bodpfozcc Rvjx Afkelk - Installed bushing: 57mm - Min. input material length: 800mm - Knife head drive motor: 18.5kW - 4 feed speeds + forward/reverse - Feed motor: 2.2kW In order: - Infeed traction rolls, toothed: 6 pcs - 3-knife head - Outfeed traction rolls, smooth: 6 pcs - Extraction port diameter: 140mm - Additional bushings included: 40, 45, 50, 75mm - Dimensions (L/W/H): 3100x1300x1400mm - Weight: 2100kg ADVANTAGES – Polish manufacture – 3-knife head – Additional bushings included: 40, 45, 50, 75mm – Used dowel rounding machine, very good condition Net price: 31,900 PLN Net price: 7,590 EUR (based on exchange rate of 4.2 PLN/EUR) (Prices may change with higher fluctuations)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total length: 3,350 mm, working width: 400 mm, grinding width: 400 mm, overall weight: 4,800 kg, power: 34 kW (46.23 HP), Equipment: documentation/manual, double-sided, Edge sanding machine / Parquet sanding machine Manufacturer: VG Machines Type: F/G 455 2 KS / 2KS Year of manufacture: 2018 Machine comes from a parquet manufacturing facility In-line design / Wide-belt machine (movable upper section) for calibrating and sanding from both top and bottom in a single pass Working width approx. 400 mm Equipped with: 1x Calibrating roller, top, approx. 11 kW 1x Sanding shoe, top, 5.5 kW Bledpjzamapjfx Afkek 1x Calibrating roller, bottom, approx. 7.5 kW 1x Sanding shoe, bottom, 5.5 kW Sanding belt dimensions: 455 x 1900 mm Feed speed steplessly adjustable, max. 16 m/min, motor approx. 2.2 kW Voltage: 400 V Total connected load: approx. 34 kW

Year of construction: 2007, condition: excellent (used), functionality: fully functional, The circular saw is used to cut through-holes in the wood, for the assembly of multiple wooden components. Bodoy Tmywopfx Afkolk

Condition: used, Year of construction: 2017, functionality: fully functional, We are offering this used HEESEMANN UKP 20 edge sanding machine, year of manufacture 2017. Manufacturer: HEESEMANN Model: UKP 20 Year: 2017 Condition: used If you have any further questions or require more information, please do not hesitate to send us a message or give us a call. If needed, the order confirmation with all technical details can be sent. 1 workpiece transport system – total length 5,015 mm – driven by a 1.5 kW three-phase motor, with double chain for workpiece transport Feed speed adjustable from 5 to 25 m/min, frequency-controlled, working height constant at 880 mm, including integrated control cabinets; Including adjustable stop ruler with digital readout and including counter fence with central width adjustment Bodpfoy A D Ecsx Afkelk with central height-adjustable and laterally adjustable top pressure bar with digital display, which presses plate-shaped workpieces with ball-bearing rubber rollers (roller pitch 38 mm), including support rollers to extend the support for large workpieces, extendable sideways by approx. 1,500 mm. 4 side guide rollers between the sanding units for secure transport of strips 1 Industrial PC 3.0/4" LCD-TFT color display, 800 x 600 pixel resolution CF card 1GB Operating system: Windows Embedded Standard Touch-screen version with display for production and downtime periods. Ethernet connection available. 2 belt sanding units "M 4" – positions 1 and 2 for sanding straight edges, with intermittent belt blow-off device, belt break detector, tool holder with quick-change device, base plate for sanding tool, prepared for electronic path control for automatic engagement and disengagement of the sanding tool, operating in both climb and counter rotation. Belt dimensions: 2,300 x 80 mm Belt speed: 0/7–12 m/s Motor rating: 3.0 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 2 oscillation devices (positions 1 + 2) For optimal belt utilization 2 belt sanding units "K 4" – positions 3 and 4 incl. stand, for sanding small profile sections, also suitable for edge rounding; can be swiveled 90° upwards and 45° downwards, belt break detector, tool holder with quick-change device, base plate for sanding tool, intermittent belt blow-off device, prepared for electronic path control for automatic engagement and disengagement of the pressure tool, including climb and counter rotation, designed for manual adjustment and digital indicators for the adjustment axes. Belt dimensions: 2,000 x 50 mm Belt speed: 0.5–8 m/s Motor rating: 1.1 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 4 electronic path controls for fully automatic, timed engagement and disengagement of the sanding tool depending on the set feed speed, sanding pressure, and angle position of the units. 2 steel tools for straight edges, equipped for air cushion sanding, incl. base plate, for 1 "M4" unit, item no. 9000191310 2 steel profile tools equipped for air cushion sanding, incl. base plate, for 1 "K4" unit, item no. 20000025684

Condition: new, Deburring machine Manufacturer: Assfalg Bedpfxedurxne Afkjlk Model: AF 165 Condition: New machine Rotational speed: 2,800 rpm Maximum chamfer width: 1 mm Standard equipment includes: - Special flap disc, grit size K80-ST - Dust extraction port - Operating manual

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 3ROLL 4000 X 6 MM, roller (bottom) diameter: 300 mm, roller diameter: 310 mm, roller length: 4,050 mm, working width: 4,000 mm, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 11,000 kg, total length: 5,700 mm, total width: 1,500 mm, total height: 1,700 mm, type of input current: three-phase, working length: 4,000 mm, Equipment: documentation/manual, emergency stop, 3 ROLL PLATE BENDING MACHINE WITH PREPINCHING capacity plate roll 4000 x 6 mm Plate width 4000 mm Thickness plate rolling 6 mm Pyramid 3 rolls with pre-pinch cylindrical plate rolling Conical plate rolling Rollers surface length 4050 mm Top roll 310 mm Side rolls 300 mm Datasheet Blodsvn I Hcopfx Afkjk power rollers rotation 15 Hp -3 rolls driven rotation with gear unit power bending- prebend side lower rollers 7,5+7,5 Hp Cene bending attachment rollers tiltable for plate conical forming - hardened contrast pad roller type Hydraulic open front drop-end , top-roll tilt-up wide opening for unloading Console electric on wheels, electric push buttons commands remote Digital readouts rollers position repetability safety and emergency installiton machine in working condition dimension 5700 x1500 x H1700 mm weight 11 Ton

Condition: like new (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: M3022, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Delsy, controller model: Digital readout, number of rollers: 4, roller (bottom) diameter: 330 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller diameter: 400 mm, roller length: 3,000 mm, working width: 3,100 mm, working height: 900 mm, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 22 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 13,000 kg, power: 10 kW (13.60 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Bending capacity with dual Initial pinch planetary plate width 3000 mm thickness 22 mm Bodpfjid Al Nex Afkolk pre-bend 18 mm --- Length on the rolls 3100 mm top roll 350 mm lower roll 330 mm Power electric 20Hp Vac 400/50 Installed configuration Hardened surface of the 4 rolls Driven central rolls rotation hydraulic motorized with gear units Synchronized hydraulic rotation between the rolls Rolls parallelism lifetime set with torsion bar Conical plate bend hydraulic attachment Calibration re-rolling feature for welded shells Front open drop-end to unload the closed rolled plates. Control console electric commands with digital readout Safety and emergency systems installed Manuals and schematics originals

Condition: like new (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 4ROLL 3000X 15 MM, roller (bottom) diameter: 270 mm, roller (top) diameter: 290 mm, side roll diameter: 250 mm, roller diameter: 310 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 800 mm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 25 mm, overall weight: 8,500 kg, total length: 5,100 mm, total width: 1,500 mm, total height: 1,800 mm, power: 7.35 kW (9.99 HP), number of digital displays: 2, warranty duration: 12 months, cone diameter: 400 mm, working length: 3,000 mm, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 ROLL DUAL PRE-PINCH ROLLING MACHINE NEW -Width of plate 3000 mm -Thickness of plate rolling 15 mm -Thickness of plate pre-bend 12 mm minimum bending diameter ID 350 mm Rolls dimensions: -Surface length mm. 3100 -Top roll mm. 290 -pinch roll mm. 270 -Power electric 10 Hp Bsdpfx Afswfc S Tskslk Technical data: -rolls hardened surface high resistance -variable rolling speed -Powered driven hydraulic rolls rotation -conical bending attachment roller type -calibration system re-rolling welded shells -deflection pinch pressure adjustable upon the thickness -overload protect complete safe operation of the machine. -control console on wheels with electric joysticks commands -position readout digital display for rolling memorize and repeat

Year of construction: 2008, condition: like new (used), functionality: fully functional, Elumatec SLK 118 3-axis CNC profile machining center. Bar processing center with 3 controlled axes; designed for machining aluminum and thin-walled steel profiles and extrusions, as well as aluminum, PVC, and lightly alloyed steel. Especially suitable for companies processing Neher insect screen profiles or those looking to automate their door production. Machining from above; workpiece rotation for processing the opposite side. Technical Data: Blodpfx Asyr Ai Dsfkek Travel range X-axis: 2450 mm / max. speed 36 m/min Travel range Y-axis: 350 mm / max. speed 15 m/min Travel range Z-axis: 280 mm / max. speed 15 m/min Spindle speed: 18,000 rpm. 6.5 HP (4.5 kW) motor-driven spindle Minimum quantity cooling system Dimensions: 3100 x 1850 x 2250 mm (122" x 73" x 89"). Weight: 1,400 kg (3,087 lbs). Equipment: PC touchscreen control with Windows software, 4 material clamps The machine is in exceptionally good condition.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: type plate available, PRICE REDUCED by 2,000 EUR!!! Now 17,500 EUR instead of 19,500 EUR!!!!! Taylor Hobson Talyrond 265 roundness measuring system. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly also of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing what it looks like, except for the computer. A newer, smaller form factor HP computer is included. Max. diameter 350 mm Max. test piece height 500 mm (higher measurements are possible, up to a maximum of 1000 mm when measured in two parts, half and half...) Self-centering of the workpiece +/- 5 mm Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The original owner, from whom I bought it, was an implant company in Hamburg. It was used in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2002 and 2005. Bljdpfx Afezcqy Eokok The Taylor-Hobson measurement software is, of course, included and runs on the supplied HP computer (without a password). Accessories are included, such as the original Taylor-Hobson desk, computer, monitor, and seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets via a shipping company. It is already well secured on the pallets. The Talyrond 265 and the desk will be wrapped with bubble wrap, etc., and secured with stretch film to provide extreme protection during transport. The system itself is fixed with "transport safety screws." Shipping costs within Germany are included; I will cover them! So, within Germany: FREE SHIPPING! The measurement system should definitely be set up and commissioned by a Taylor Hobson service technician, who will then also recalibrate the system on-site. This is now recommended after a few years. Mistakes can be made during setup and commissioning. For example, some locking screws are installed for transport; if you forget to remove them, the system may be damaged when it starts up. This is a truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!

Condition: used, Year of construction: 1995, functionality: fully functional, grinding height: 100 mm, grinding length: 3,250 mm, We are offering this used Löffler KSL-100 MG edge sanding machine, year of manufacture 1995. Manufacturer: Löffler Maschinenbau GmbH Langenaltheim / Bavaria Model: KSL-100 MG Serial number: 95.005/6/95 Bsdjythu Ispfx Afkelk Year of manufacture: 1995 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, machine/vehicle number: 10659, roller (bottom) diameter: 300 mm, roller (top) diameter: 350 mm, working width: 3,000 mm, sheet thickness (max.): 25 mm, empty load weight: 24,000 kg, TECHNICAL DETAILS Number of rollers: 4 pcs Max. sheet thickness: 25 mm Max. working width: 3,000 mm Upper roller diameter: 350 mm Lower roller diameter: 300 mm Blodpfx Aeyua Ezofksk MACHINE DETAILS Control: Conventional Dimensions & Weight Dimensions (L x W x H): 6,300 x 2,000 x 1,800 mm Unladen weight: 24,000 kg Transport packages: 1 pc.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, The machine is in good condition, has been in use until recently, and is now available for sale due to a new purchase. The machine has been regularly serviced. It is ideally suited for sanding solid wood, both straight and profiled parts. Bedpfxjzdvupj Afkolk The processing side, with its guides, features an adjustable sanding shoe. The feed mechanism is an ideal addition for finer edge sanding on straight edges. The machine has a compressed-air-operated belt oscillation for optimal sanding results. The machine has a chassis. Various sanding belts are included.

Condition: good (used), Year of construction: 1994, Electrical connection: 380V / 50Hz, 16A Air pressure: 7 bar Working height: 1005 mm Width: 1300 mm Height: 1500 mm Depth: 1200 mm Bsdpfx Afjzaak Uekelk Weight: approx. 300 kg Condition: good, second-hand

Condition: used, Dimensions (l x w x h) approx.: 3200 x 1800 x 1600 mm Weight approx.: 500 kg Bodpsxrlgwsfx Afkelk 3 spindles, 1 milling spindle, 2 - 3 grinding and milling spindles, feeder belt approx. 100 mm wide, total working length approx. 3000 mm, extendable workpiece support

Condition: excellent (used), ITALMECCANICA PROFILWOOD MAK6B Automatic Grinder / Sanding machine 6 sanding units, each 1.5 kW, max. working width 250 mm, Depth 0-250 mm, min. Dimensions in mm: approx. 4700 x 2000 x 2300, Weight in kg: approx. 3000, (Makor, Delle Vedove, Venjakob, Flader) Blsdpfx Aodykwlofkok

Condition: good (used), Year of construction: 2006, I sell the widebelt sanding machine Biesse Regal 520 - 1350, year 2006. Configuration: 1pc. electronic segmented pad 1pc. electronic segmented pad Blodpfjzkmdhox Afkok Working width 1350mm Pressure rollers for short elements. Air-blow on both units. Total weight 3050kg Condition very good. Available immediately.

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Bledpfx Afowyda Uekjk Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: new, Year of construction: 2018, I sell the new widebelt sanding machine Casadei Libra 35 RCT 95 Year 2018. Configuration: Steel cylinder Combi unit hard rubber cylinder + segmented pneumatic jumping pad. Working width 950mm Elektronic working height adjustment with digital readout 3-160mm 1 Motor 2 Feeding speeds. Programming of in/out jump of the pad. Sensitive adjustment of pad position. Sensitive adjustment of cylinders position. Bjdozkb Nxspfx Afkjlk Pneumatic adjustment of pad and cylinders pressure position. Pressure rollers for short elements. Air-blow for cleaning the sanding band. Condition NEW ! The machine was working on showroom. Available immediately. Including full documentation and CE.

Year of construction: 2022, operating hours: 141 h, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 4,176 mm, travel distance Y-axis: 1,040 mm, travel distance Z-axis: 540 mm, saw blade diameter: 180 mm, milling spindle speed (max.): 20,000 rpm, machine/vehicle number: 122000029, Machine with only 141 operating hours! TECHNICAL DETAILS Travel range X-axis: 4,176 mm Travel range Y-axis: 1,040 mm Travel range Z-axis: 540 mm Traverse speed X-axis: max. 120 m/min Traverse speed Y-axis: max. 60 m/min Traverse speed Z-axis: max. 30 m/min Machining length without end-face machining: max. 3,851 mm Machining length with end-face machining: max. 3,525 mm Maximum bar diameter: 180 mm Bljdpfx Afjzgfvbokok Tool storage locations in the automatic magazine: 12 Disc cutter diameter: 120 mm Saw blade diameter: 180 mm Tool length: max. 150 mm Milling spindle speed: max. 20,000 rpm Milling spindle power: 7 kW S1 (water-cooled) Tool holder: HSK-F63 MACHINE DETAILS Voltage: 400 V Frequency: 50/60 Hz Power: 17.5 kW Current consumption: 25 A Maximum motor current consumption: 20 A Short-circuit resistance (Ik/SCCR): 5 kA Compressed air pressure: 7 bar Dimensions & Weight Dimensions (L x W x H): 7,643 x 2,171 x 3,000 mm Weight: 3,800 kg EQUIPMENT Automatic tool changer eluCam software Autonomous clamping jaw movement Premium clamping jaw with linear guide A-axis, infinitely adjustable from -120° to +120° C-axis, infinitely adjustable from -220° to +220° Note: Further technical details regarding the machine can be found in the attached document.

Condition: used, Technical specifications: Max. grinding width: 300 mm Grinding unit with shoe Bjdpfxjziagyj Afkslk Pneumatic belt tensioning Working pressure: 6 bar Work table length: 1250 mm Built-in fan Fan motor power: 0.7 kW Motor power: 5 kW Overall dimensions: Length: 1300 mm Width: 850 mm Height: 1300 mm

Condition: new, Number of sanding units 8 st. sanding width 180 (260) mm Sanding height max. 160 mm Dimensions (L/W/H) 3065x1600x1900 mm weight of the machine ca. 1500 kg LÖWER Leistomat SD ----- Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm 1 softisc unit Ø=200mm above 0.75kW, 1 slat roller unit L=200mm top 0.75kW, 1 soft disc unit Ø=200mm bottom 0.75kW, 1 slat roller unit L=200mm bottom 0.75kW, 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm Bljdpfx Aovnv Uhefkok - Linear guidance of all grinding units Linear ball bearing sets on hardened shafts - time-controlled immersion of all lamella roller units directly above the incoming workpiece edges. By the It is possible to immerse the aggregates deeper into the profiles to be able to deliver. - Motorized workpiece thickness adjustment of the machine - variable grinding flap speed via frequency converter for adjusting the grinding intensity using frequency converters (separate for discs, surface rollers and side rollers) - Disc aggregates as soft discs with Velcro fastener for Grinding wheels (wood pulp) - Feed via three lower and one upper conveyor belts and Spring-loaded pressure rollers with infinitely variable speed 4-15m/min - Parameters that can be set using the touch panel are workpiece thickness, Workpiece width (left side units individually), immersion depth Side units, spindle speed, feed speed - Saving the parameters as machine programs in program mode - Working in automatic mode with non-contact Workpiece width detection and profile detection as well as automatic Adjustment of the sanding units to the workpiece width and the Profile shape (workpiece height is set in advance) - pneumatically clocked driven feed roller, automatic Clamping of the workpiece and feeding in after unit adjustment - Red/green indicator lights to indicate operational readiness - shortest workpiece length 380mm - Transport belt width 200mm - max. workpiece width 180mm (260mm in the envelope process) - Workpiece height 12-160mm - Suction connection 4 x 100mm and 2x80mm diameter - Sensor-controlled tool blow-off directly on the discs - Length (case) x width x height (mm): 3065x 1600 x 1900 Complete length: 4365mm (including roller conveyor with integrated workpiece width detection) - Weight: 1500kg - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version ----- Price of the above machine on request! ----- Special accessories with additional costs: Set of replacement slats for Leistomat SD-200 consisting of Area aggregates: 30 strips EH45 / 200 - 7 (rolls) 30 strips EH45 / 200 - 20 (rolls) Folding units: 96 strips M55 / 120 - 4 SmartFlex slat disc Ø200 solid with 30 grooves 50mm long Set of replacement slats for SmartFlex slat disc consisting of 60 strip M35 / 50 K 180-7 p Sandpaper disc VB for soft disc D=200mm grit 220 with velor backing (Velcro), pack of 100. Sandpaper disc VB for soft disc D=200mm grit 280 with velor backing (Velcro), pack of 100. ----- Price of the above-mentioned special accessories on request! -----...

Condition: ready for operation (used), maximum belt width 240mm mechanical oscillation unit spacing 200-1290mm screw-type belt tensioning Blodpezhuv Hjfx Afkek star/delta starter manual adjustment of unit spacing cast iron housing dimensions of the side table 920x350mm two 7.5kW motors

Condition: new, Year of construction: 2024, table length: 1,450 mm, table width: 500 mm, overall weight: 550 kg, input voltage: 400 V, oscillation stroke: 20 mm, input frequency: 50 Hz, OBS 150 ARCO edge sanding machine. NEW. Sanding height 150 Oscillation stroke 20 mm Machine length 1450 mm Front side of the processing side is curved Table spread (adjustable) Rear side for straight processing. Table tiltable up to 45 gr. Blsdpfx Afor Erhwokjk Motor power 2.5 kW, 2 speeds. Sanding speed 11.5 and 8 meters/sec. Central extraction Diam 140 mm. Pneumatic tensioning of sanding belt. The machine is very suitable for staircase manufacturers.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 6,450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, rotational speed (max.): 6,000 rpm, tool diameter: 80 mm, TECHNICAL DETAILS X-axis travel: 6,450 mm Y-axis travel: 400 mm Z-axis travel: 380 mm Machining length: 6,500 mm Number of tools: 8 pcs. Tool holder: BT30 Tool change time: 1.2 s Maximum tool diameter: 80 mm Spindle speed: 6,000 rpm Feed rate X: 34 m/min Feed rate Y+Z: 18 m/min MACHINE DETAILS Total power requirement: 8.5 kW Bjdpfx Aeyg D A Iefkjlk Dimensions & Weight Dimensions: 9,800 x 3,000 x 2,400/3,300 mm Weight: 5,400 kg