Used Round Bale Press for sale (32,579)

Year of construction: 2004, condition: ready for operation (used), Connected load: 15.5kW, weight: 6.8t. Bwjdpfoip D Rzox Adxow

Condition: ready for operation (used), Hsm V-Press 860 Baler, year of manufacture: 2005-2009, price: €5,600 Compression force: 54 kN Specific pressure: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening (W x H): 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Consumables: Wire Pressed material: film, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene Hsm V-Press 860 Plus Baler, year of manufacture: 2013-2015, price: €7,500 Bedpfxera Rbgj Adxeww Hsm V-Press 860 L Baler, year of manufacture: 2015, price: €9,000 Hsm V-Press 860 Plus Baler, year of manufacture: 2019, price: €9,000 Hsm V-Press 860, ex-demo, year of manufacture: 2020, price: €13,000 Fourfold bale strapping with wire Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight (kg): approx. 500 kg Technical data: (L x W x H, mm): 1,213 x 1,824 x 2,987 Loading aperture (mm): 1,200 x 565 Cycle time (s): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) Hsm V-Press 860 Plus B Baler, year of manufacture: 2020, price: €14,000 Pressing force: 594 kN Voltage/frequency: 400 V/50 Hz Power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Filling method: Manual Dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Weight: 2,336 kg Consumable type: Wire Pressable materials: film, cardboard Idle cycle time: 25 s

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 161.40.492, Used Strautmann bale press, type: BalePress 3, serial number: 161.40.492, year of construction: 2020, with tape extraction hook Power supply: 230 V 50 Hz Electrical Power: 0,75 kW Bsdpfx Aevvk T Iodxeww Protection class: IP54 Pressing force: 27 kN Press stroke: 580 mm Weight of the machine: 275 kg Transport dimensions (lxwxh):1070 x 754 x 2110 mm (without pallet) 1070 x 754 x 1945 mm Filling opening (wxh): ca. 700 x 450 mm Cycle Time: 27 sec. Bale weight 30 kg Bale size in the chamber (lxwxh)*: 500 x 700 x 500 mm Bale tying: strapping with two twines, PP band ADVANTAGES Easy to install and transport Easy to handle bales Practical emptying of bales Foil/cardboard mode switch Simple and safe operation Stable door locking system Stable guide of the press plate "D" level security system. Small space required BP3: Bale tying system with open door; BP3CD: tied bales with door closed Solid construction Wheel door lock Ideal for small shops. The Strautmann BalePress 3/3CD is a small, single-chamber baler. At the same time, it is perfectly suited for baling common and smaller quantities of paper, foil, PET bottles and plastic waste and, thanks to its compact design, it can also fit into a very small space. It is clearly the best alternative for our partners with less waste and a waste container with a small footprint. Depending on the pressed material, the 3 ton pressing force can result in a volume reduction of up to 90%. The machine can produce relatively small and therefore easy to handle bales of up to 35 kg. By using it, significant savings in storage and transportation costs can be achieved. Bales are easier to transport and sell than untreated waste. Due to its dimensions, the machine can also fit in a very small space, and because of this, the baling technology is no longer available to our partners who have limited space. Price 3.490 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2018, operating hours: 23,000 h, Central lubrication, cutting unit, net wrapping, / tandem tires, DLA, 40km version. / / Bodpst Iq D Hsfx Adxeww

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 21 03 0178, pressing force: 80 t, filling opening width: 1,500 mm, filling opening length: 1,800 mm, bale length: 1,100 mm, bale weight: 600 kg, total width: 750 mm, total height: 3,400 mm, total length: 12,220 mm, input voltage: 400 V, input current: 311 A, overall weight: 21,000 kg, oil tank capacity: 1,200 l, The machine was in operation until 06/2024 and was taken out of service due to a consolidation measure. The system will be inspected and overhauled before sale. Bedpfowx Nxyox Adxsww

Condition: used, Year of construction: 2025, Compressed air | Knives: 25 | Pickup-hydraulic | Pickup support wheel | Roller hold-down | Claas Rollant 630 Uniwrap Year of manufacture: 2025, currently 422 bales pressed (as of 26.06.2025) Technical specifications: - Baler-wrapper combination with 1.25 m chamber diameter - Chamber width 1.20 m MULTIFLOW pickup: - Pickup width 2.10 m - Gauge wheels, pendulum mounted, with 16x6.5-8 tyres - Dual feed augers PRO cutting floor: - Hydraulic suspension and lowering cutting floor to prevent blockages - Operation via terminal including optical and acoustic signals ROTO CUT cutting rotor: - Cutting rotor with four spirally arranged tine rows - Individually protected knives against foreign objects - Hydraulic knife group selection Chamber: Bodpewvwtajfx Adxsww - 16 profiled steel rollers - Rear door with hydraulic locking - Greasable baler roller bearings Wrapping unit: - Fully automatic control - Twin wrapping arms with 750 mm film pre-stretchers - Wrapping speed max. 36 rpm for 6 layers of film in 23 seconds - Terminal for direct access at the wrapping table - Hydraulically lowerable film magazines for 12 spare rolls - PROFI CAM camera and work light for wrapper illumination - Continuous chain lubrication - Hand wash tank incl. soap dispenser - Hydraulic requirements: load-sensing and 1 x single-acting Equipment: MULTIFLOW Pickup HD with twin roller hold-down Dummy knives, set of 25 ROTO CUT cutting rotor with hydraulic swinging PRO cutting floor, 25 knives PREMIUM LINE knife set, 25 pieces Film pre-stretch 82% Bale transfer guide ROLLATEX net tying Single wide-angle PTO shaft with cam-type clutch, 6-piece Tractor hydraulic connection, comfort Adjustable support stand Hydraulic/electronic ROTO CUT swinging floor K80 ball head hitch, MR Tyres: 600/55 R26.5 Dual-line compressed-air brake system, up to 40/50 km/h LED high-end work lights including service lighting Screen for PROFI CAM CEMIS 700 Automatic central lubrication system, electrically actuated Extended tool set | Internal no.: 11264178

Year of construction: 2016, condition: ready for operation (used), Pressing force: 50t, opening dimensions: 870x1500mm, bale dimensions: 1500x1100x1100mm, bale weight: 450kg, length: 1524mm, width: 2100mm, height: 3217mm, weight: 1.93t, operational hours counter: 18h. Bodpfx Adsirakgjxoww

Condition: ready for operation (used), Hsm HL 4809 LI baler - Large filling opening, ideal for big boxes - Container tipper for convenient filling Pressing force in kN: 480 Bwsdpfjra Dddjx Adxjw - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 400 kg - Bale dimensions (length x width x height in mm): 1200 x 1100 x 750 - Machine dimensions (length x width x height in mm): 5648 x 1849 x 2515 Idle cycle time in seconds: 53 - Manual tying: 4 times with wire

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, pressing force: 25 t, filling opening width: 1,090 mm, filling opening length: 530 mm, bale length: 1,200 mm, bale width: 800 mm, bale height: 800 mm, bale weight: 250 kg, total width: 1,760 mm, total height: 1,995 mm, overall weight: 1,410 kg, noise level: 59 dB, transport height: 1,995 mm, year of last overhaul: 2025, Vertical baler Bramidan 4- x 25 for 25 t pressforce. In good condition, ready to work. Bale weight 200-300 kg. Bodpfxowpmbae Adxjww

Condition: used, Year of construction: 2020, operating hours: 9,568 h, / NET BINDING / AUTOMATIC CENTRAL LUBRICATION / WHEELS 500/45-22.5 / GEARBOX 1000RPM 157KW 6SP / TANDEM AXLE WITH DLA / NO MONITOR ISO BUS BALER VISION / PACK / RUBBER MAT FOR BALE INCLINATION / B-WRAP / BINDING SYSTEM / BALE TIPPING / WERKZ Bwedpou Rvhkjfx Adxew

Condition: used, Year of construction: 1994, operating hours: 62,058 h, functionality: limited functionality, machine/vehicle number: 099314, bale width: 770 mm, bale height: 520 mm, Manufacturer: COMDEC - PAAL Model: LV2020PFT Serial number: 099314 Year of production: 1994 Maximum capacity: 25,000 kg/h Bedpfx Adet Ucqfoxjww Bale outlet dimensions: 77 cm x 52 cm The baler is operational - it worked until the production line was extinguished. Recently there was a problem with automatic binding.

Condition: used, Year of construction: 2021, operating hours: 8,170 h, Equipment: crop cutter, PickUp-hydr. | Roller press | Claas Rollant 520 RC Year of manufacture 2021 8200 pressed bales Equipment: Bwsdpfx Adov Aqthsxew Pickup with roller press, pickup width 2.10 m Follower wheels for pickup, oscillating (pivot point Ø 30 mm) ROTO REVERSE ROTO CUT cutting rotor Set of knives Bale ejector, straight Single wide-angle universal joint shaft with cam clutch, 6-part Tires 19.0/45-17 Input gear 540 rpm OPERATOR, operating terminal with display | Internal no.: 11031991

Condition: good (used), Year of construction: 1993, pressing force: 60 t, filling opening width: 1,050 mm, filling opening length: 1,500 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 500 kg, total length: 6,661 mm, overall weight: 12,000 kg, oil tank capacity: 800 l, year of last overhaul: 2023, Equipment: documentation/manual, HSM VK 6015 automatic channel baler I offer for sale a baler that worked for me for more than 4 years. Previously worked in a warehouse in DE, came to us in original condition. Currently dismantled, but it will be possible to start up before purchase. Optional equipment: Pre-crush flap, excess material knockout, oil cooling upgraded to a large radiator, cabinet and tank heating, wire end, bale binding sound. After disassembly replaced: Tying system (replaced all bearings, chains, sprockets, new tying heads upgraded to new HSM type, new needles) It is possible to purchase the machine with ascending belt feeder without channel. Crushing force: 600kN /. Unit pressing force: 106 N/cm² Drive power: 50 kW Voltage / frequency: 400 V / 50 Hz Bsdeudzv Depfx Adxsww Work cycle time: 17 s Year of manufacture 1993 Capacity when working with cardboard 3t/h at a density of 30kg/m3 187 m3/h Bale weight depending on material 400-550kg Depth x width of loading opening: 1020 x 1500mm Bale width x height x length: 1100 x 750 x 600-1200 mm Total length x width x height: 6661 x 3994 x 2583 mm Machine weight: 12 t Type of consumables: wire Pressed material: film, mixed paper, cardboard, die-cutting machine waste, Oil tank capacity of 800l

Condition: ready for operation (used), Pressing force: 60 tons YEAR OF MANUFACTURE: 2018-2020, price: EUR 5,500 Bale dimensions: 120 x 80 x 110 cm Press dimensions: 1900 x 1400 x 2200 mm – height Press weight: approx. 2,430 kg Bale weight: up to 500 kg Bwedera Nqhjpfx Adxow Oil heating Motor: 7.5 kW Brand new showroom baler costs EUR 11,000

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, pressing force: 5 t, filling opening width: 810 mm, filling opening length: 710 mm, bale length: 695 mm, bale width: 510 mm, bale height: 600 mm, total width: 920 mm, total height: 2,410 mm, total length: 940 mm, noise level: 60 dB, power: 1.1 kW (1.50 HP), We have a lot of brand new or used CK International balers CK51, CK101, CK100VX, CK250, CK300VX and more on our stock. Please contact us and to get a quote. Bedjvy Drxjpfx Adxeww

Condition: good (used), Year of construction: 2007, operating hours: 8,800 h, functionality: fully functional, pressing force: 24 t, filling opening width: 620 mm, filling opening length: 1,000 mm, bale length: 1,200 mm, bale width: 700 mm, bale height: 500 mm, bale weight: 200 kg, total width: 2,825 mm, total height: 1,940 mm, total length: 6,250 mm, input voltage: 400 V, power: 9.2 kW (12.51 HP), operating pressure: 220 bar, Presskraft: 240 kN Spezifische Presskraft: 64 N/cm² Antriebsleistung: 9,2 kW Spannung / Frequenz: 400 V / 50 Hz Taktzeit im Leerlauf: 17,2 s Pressleistung Leerlauf (theor.): 73 m³/h Breite der Einfüllöffnung x Länge der Einfüllöffnung: 620 x 1000 mm Ballenbreite x Ballenhöhe x Ballenlänge: 700 x 500 x 600-1200 mm Bwjdevq Rpljpfx Adxew Länge x Breite x Höhe: 6250 x 2825 x 1940 mm Gewicht: 4 t Art des Verbrauchsmaterials: Draht Pressgut: Folie, Gemischtes Papier, Kartonage, Stanzreste, PET Getränke und Aluminiumdosen,Weichverpackung

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, pressing force: 40 t, filling opening width: 1,400 mm, filling opening length: 860 mm, bale length: 1,200 mm, bale width: 800 mm, bale height: 1,000 mm, bale weight: 400 kg, total width: 1,330 mm, total length: 4,600 mm, type of input current: three-phase, overall weight: 6,500 kg, year of last overhaul: 2023, operating pressure: 200 bar, tank capacity: 280 l, cutting force: 40 t, ABT 4000V automatic channel baler For sale channel baler with automatic binding. The machine in our use for 3 years, currently works with a conveyor and has a modified enlarged hopper. It bales cardboard foil, we are selling because we need a larger machine. Since the purchase in the machine has been replaced hydraulic oil, part of the hoses, two new pumps with modification, one preliminary fast the other main, which allows to definitely speed up binding. The machine also had its keel sliders replaced currently fully operational does not require repairs. It has additional equipment, i.e. a knockout/scraper for excess material. Ele. cabinet modernized in 2005. New pumps 2 pcs. in 2022r New oil in 2023r New sliders in 2022r overhaul of needles Machine fully operational, Manufacturer ABT 4000V Main motor 15kW Binding motor 3kW Pump 200bar Bwedpfxsudzuaj Adxow Oil tank 280l Weight 6500kg Length 4600mm, width 1330mm Channel dimensions 1000-700mm Bale weight 300-500kg depending on the material The baler has applied a unique solution of the possibility of its transport by hooklift. I have the original DTR in DE ora translation PL

Condition: ready for operation (used), Baler Hsm 155 VL Bale dimensions L x W x H: 1100 x 700 x 700 - 950 mm Bale weight: 2000 - 250 kg (Cardboard) Technical data: L x W x H: 1470 x 940 x 2259 / 2439 mm Weight: 950 kg Pressure force 16 tons Bwsdpfx Adsra Nrmsxjw Power supply: 400 V (three phases) Motor power: 4 kW Bale ejector Hsm 155.1 VL baler pressure force 18 tons Price of Hsm 155.1 VL baler - 2600eur Hsm 155.2 vl baler pressure force 16 tons Price of hsm 155.2 vl baler - 2800eur

Condition: ready for operation (used), Strautmann PP 1207 Pressure force 58 tons Bwsdora Aq Depfx Adxjw Baler weight from 400-500 kg depending on material 4KW engine Baler format (LxWxH): 1200 x 700 x 800 mm Feed opening: 1145 x 430 mm External dimensions (LxWxH): 1844 x 1067 x 2868 mm Feed opening: 1145 x 430 mm Transport height: 2500 mm baler weight approx. 2300 kg

Condition: ready for operation (used), Year of construction: 2003, Technical data of baler 18S: Motor: 4kW Connection voltage: 400/50 V/Hz Press force: max. 180 kN Cycle time: 22 s Pressing time: 12 s Filling opening W x H: 107 x 62 cm Height w. Floor: 98 cm Ejected bale* W x H x D: approx. 110 x 70 x 70-80 cm Bale weight: 120 - 180 kg max. Dimensions W x D x H: 152 x 95 x 197 cm Weight 850kg The 2003-2007 vintage costs 3500 eur Yearbook 2008-2009 costs 3800 eur Bsdpfx Aora Aghjdxoww The 2010-2013 vintage costs 4500 eur Yearbook 2016-2018 costs 5000 eur

Condition: excellent (used), Baling press Hsm HL 4809 - Large filling opening, ideal for large boxes - Container tipper for convenient filling Power in kN: 480 - Motor in kW: 10.7 - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 400 kg Bedpfx Adov Ak Npsxsww - Bale dimensions length x width x height in mm: 1200 x 1100 x 750 - Dimensions of the device length x width x height in mm: 5648 x 1849 x 2515 Idle cycle time in seconds: 53 - Manual tying: 4 times with wire Year 2015-2017 Complete baler, side housings unscrewed for transport Balers after inspection by an authorized service center

Condition: excellent (used), Manufacturer: HSM Model: VL 155.2 Dimensions (WxDxH): 1450 x 926 x 2400 mm Pressure: 16 t Filling opening: 1100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1100x700x950 mm Bale weight: 110 - 200 kg Connection: 400 V / 50 Hz Drive power: 4 kW Rated current: 8.5A Bwsdov Ai Tgopfx Adxsw Binding: 4-fold vertically Vertical capacity: 4 - 8 bales/hour Machine weight: 940 kg Year 2001-2005

Condition: excellent (used), Baler Hsm V-Press 825 plus Pressing force: 250 kN Drive power: 4 kW Cycle time: 39 s Loading height: 958 mm Loading opening width x height: 1195 x 530 mm Bale length x width x height: 1200 x 780 x 700 mm Bale length x width x height: 1200 x 780 x 700 mm Machine width x depth x height: 1700 x 1046 x 2370 mm Machine weight: 1063 kg Type of consumables: strapping tape Bwedpsv Akcisfx Adxow Compressed material: foil, mixed paper, cardboard, die-cutter waste, clothing Years 2012-2014 price 6000eur Baler Hsm V- Pres 825 pro 2019-2021 costs 9,000eur

Condition: excellent (used), Baler Hsm HL 4812 Pressing force: 480 kN Unitary pressing force: 58 N/cm² Drive power: 15 kW Voltage / frequency: 400 V / 50 Hz Working cycle time: 33.5 s Idle capacity (theor.): 95 m³/h Loading opening width x length: 1020 x 1250 mm Bale width x height x length: 1100 x 750 x 1200 mm Bale weight: 420 kg Total length x width x height: 5158 x 1642 x 2550 mm Machine weight: 5899 kg Type of consumables: wire Compressed material: foil, mixed paper, cardboard Bwjdpfx Aov Ak Dgodxow Year 2017 15kw engine

Condition: good (used), Brand: BRAMIDAN Model: B3 Width (cm): 94 Depth (cm): 72 Bjdpfxev Akr Ro Adxeww Height (cm): 198 Weight (kg): 310 Power (kW): 1.1 Voltage (V): 230 Chamber width (cm): 70 Chamber depth (cm): 50 Chamber height (cm): 110 Year of production: 2010-2015 Pressure force (t): 3 Noise level (dB): 69