Used Rotary Feeder for sale (6,002)

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min bore 60.0 mm motor 230 Volt Bljdpfx Aoxabm Nocvjf weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: new, table diameter 500 mm table load 300 horizontal kg. table load 150 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.5 U/min bore 90.0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90.0 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) Bsdpjxabl Ssfx Acvolf - foot switch

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm Bjdpfx Acsxaatnjvolf weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. Bljdpfxexaafqe Acvef - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: excellent (used), Year of construction: 2017, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 110-00310, input voltage: 400 V, type of input current: three-phase, feed length X-axis: 2,500 mm, feed length Y-axis: 800 mm, pneumatic connection: 6 bar, compressed air connection: 6 bar, The KSL110-Headbag CNC Rotary Head Sewing System is in excellent condition and has logged approximately 2,000 operating hours. Fields of Application: Demanding safety, functional, and decorative seams. Features: - Sewing machine driven on the X axis, template driven on the Y axis - 360° rotary head with alternating double feed for perfect seam results in multi-directional sewing processes - Intermittent feed (feed stops when the needle pierces the material) - Switchable needle feed (on/off) for continuous sewing with maximum seam quality - Sewing head can be pneumatically lifted (75 mm) for direct access to any seam position - Two 26 mm bobbins and hooks - Excellent sewing properties thanks to the vertical hook system - Top thread tension is electrically/pneumatically adjustable via menu with Eltex unit - Broken thread monitoring - Bobbin thread monitoring via stitch counter - Electromagnetic thread trimmer for upper and lower thread - Mobile electric bobbin winder (freely positionable) - The touchscreen control panel provides intuitive operation and stands out with its modern, clear layout. Seam progress can be monitored in real time on the screen. Special Features: - Automatic detection of the workpiece holder/sewing program via hand scanner and barcode ensures additional process safety - Sewing area is protected by light barriers (CE compliant) - Pneumatic presser foot height adjustment - Clamping device for fixing two sewing templates in the working area Technical Data for the KSL110-Headbag CNC Rotary Head Sewing System: - Length and width: 3,495 mm x 4,276 mm - Height: 1,685 mm - Weight: 2,000 kg - Max. sewing area: 2,500 mm x 800 mm - Stitch type: 2-needle/double lockstitch - Max. material thickness: 10 mm - Max. sewing speed: 2,800 stitches per minute - Max. stitch length: 12 mm - Operating voltage: 3P+N+PE / 400 VAC / 50–60 Hz - Power consumption: 16 A / 5 kW Bedpfx Aceyxnl Sevjlf - Operating pressure (min. – max.): 6 bar - Year of manufacture: 05/2017 - Operating hours: approx. 2,000 h - Control unit: Touchscreen monitor with computer (Windows) The CNC Rotary Head Sewing System KSL110-Headbag is a powerful industrial sewing system designed for demanding safety, functional, and decorative stitches. Manufactured in 2017, this model is characterized by its robust construction. The machine is housed in a grey and white aluminum cabinet that appears clean and well-maintained, indicating careful use. This advanced CNC sewing system offers a sewing area of 2,500 mm x 800 mm and operates with a 2-needle double lockstitch system. It supports a maximum sewing speed of 2,800 stitches per minute and a maximum stitch length of 12 mm. The sewing head is pneumatically liftable by 75 mm, allowing direct access to any seam position, and features a 360° rotating head with alternating double feed, ensuring perfect seam results in multi-directional sewing processes. It is particularly suitable for demanding and industrial sewing applications that require high precision and reliability.

Year of construction: 2026, condition: new, functionality: fully functional, load capacity per stand: 1,000 kg, Electronic rotary positioner with height adjustment via index hole pattern Rotary turner Rotary stand Rotary machine Available on request with your individual fixture. Product Description: Our moveFLEX solo combines maximum precision with optimal flexibility. The manually adjustable height, with an index hole pattern on both sides, allows you to easily adapt the working height to various requirements. The electric rotary axis provides smooth and precise rotation of the fixture. Thanks to integrated forklift pockets for safe transport by forklift, our moveFLEX solo is ideally suited for changing work environments. Application Area: Our moveFLEX solo is ideal for welding, assembly, and processing tasks, especially in applications requiring flexible and precise positioning. Suitable for use in covered, industrial halls with a temperature range of 10-40°C. Level, load-bearing hall floor with a maximum inclination of 1% is required. The moveFLEX solo should only be connected to a power source equipped with a compliant residual-current device (RCD), type B, rated for 30mA. Safety Devices: Emergency stop function at the control panel. Bljdpfx Aeyt Dp Uocvjf

Condition: new, Year of construction: 2026, functionality: fully functional, power: 1.5 kW (2.04 HP), overall weight: 575 kg, total width: 1,250 mm, total length: 1,340 mm, total height: 1,300 mm, type of input current: three-phase, load capacity per stand: 2,000 kg, Electronic rotary positioner with counter bearing and height adjustment via grid hole pattern Rotator Rotating frame Rotary machine Custom fixture available upon request. Product description:  Our moveFLEX duo combines ultimate precision with maximum flexibility. The manually adjustable height, using a grid hole pattern on both sides, allows optimum adaptation of the working height to various requirements. The electric rotary axis enables smooth and precise rotation of the fixture. Thanks to the combination of integrated wheels and forklift pockets for safe transport by forklift truck, the moveFLEX duo is perfectly suited for changing work environments. Field of application:  The moveFLEX duo is ideal for welding, assembly, and processing tasks, especially for applications that demand flexible and precise positioning.  Suitable for use in covered, industrial-grade workshops with temperature range of 10-40°C. Bljdpex Hp Ttjfx Acvof  Level, load-bearing workshop floor with a maximum incline of 1%.  The moveFLEX duo must be connected only to power sources equipped with a compliant residual current device (30mA) RCD Type B. Safety features:  Emergency stop device on the control panel. Technical features:  Height adjustment: Individually adjustable working height.  Electric rotating mechanism: Precise rotation for optimal processing.  Flexible transport: Integrated wheels for easy movement.  Forklift pockets: Safe transport with a forklift truck.  Robust construction: Stable design for demanding industrial applications.  Safety & operator comfort: Intuitive controls for easy operation.

Condition: ready for operation (used), Bar feeder Top Load 4-2, year 2014 Bsdpfsyy Rv Nox Acvelf

Year of construction: 1976, condition: ready for operation (used), A Heinrich Müller rotary swaging machine for wire and tube production is available. Tool system: hammer jaws, tool set: 4/set, tool angle: 2.5°, tool length: 100mm, tool width: 32mm, tool heights: 50.5mm/51.5mm/52mm, tool diameter range: 15mm-31mm, initial diameter: 7.5mm, final diameter: 3.2mm, total cross-sectional reduction: 81%, reduction range per forming stage: 12%-20%, cycle time: approx. 15s, max. taper angle: 10°/side. Documentation available. An on-site inspection is possible. Bljdpfxeyvuu Io Acvef

Condition: excellent (used), Lazy Susan Rotary Table Bjdpfehlp H Dex Acvelf Stainless steel frame Height adjustable legs Plastic top, diameter table: Ø 1500 mm Total dimensions: 1600 mm x 1500 mm

Condition: excellent (used), Lazy Susan Rotary Table Nylon top with dividers Distance between dividers: 60 mm Blodpfx Acshlp Ipevjf Diameter top: 1250 mm Height adjustable legs Total dimensions: 1250 mm x 1250 mm

Condition: excellent (used), Soco Lazy Susan Rotary Table Nylon top Diameter top: 1200 mm Blsdpfjhlp I Nox Acvsf Height adjustable legs Total dimensions: 1200 mm x 1200 mm.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, TABLE Surface (mm): 1400×1200 T-slot / Width / Distance (mm): 9(11) / 22 / 125 Max permissible load (kg): 8000 Auto indexing, continuous (°): 0.001 TRAVEL Longitudinal (mm): 2500 / 3000 / 4000 Cross (mm): 1050 / 1250 (with flat ram) 1000 / 1250 (without flat ram) Vertical (mm): 1450 FEED Axis feed (mm/min): 5000 Rapid traverse (mm/min): 12000 (X, Y) 10000 (Z) Bodpfsyfmtasx Acvelf 6 (C) Drive motor (Nm): T1400×1200: 50 (X), 27 (Y, Z), 50 (C) SPINDLE Taper: ISO50 Speed (rpm): 4000 2-step: 0–1000 / 1001–4000 Drive motor (kW): 28 / 38 WEIGHT Machine weight (kg): 30000

Condition: excellent (used), Motor-driven rotary shift table Stepless rotary table (pitch 0.001°) Manufacturer: Rückle Type: PKT 6 Clamping surface: 1600 mm x 1600 mm Bljdpfeif Rlbsx Acvsf Travel lengthwise: W-axis = 1000 mm Condition: Very good (used)

Condition: excellent (used), Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Attached pallet station: pallet changing table (2 pallets) Manufacturer: Rückle Type: PKTF 1200 Table size: 1200 mm x 1200 mm Total height: 660 mm Centring hole: 100 H6 mm Clamping grooves: 7 pieces Slot dimension: 22 H7 mm Bodpfx Aefk R Tdjcvolf Slot distance: 160 mm The displacement is measured via a ROD 250 rotary encoder. Condition: Very good (used) Optionally with machine bed (travel = 2000 mm ) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a free specialist for SHW machine tools. Our main focus lies in the field of tool milling machines. Our services include the supply of spare parts, on-site customer service, machine overhauls and control modernization. Services: - Used machines - spare parts - after-sales service - machine service - machine overhauls - control modernization

Condition: new, Year of construction: 2026, Top quality made from high-strength structural steel Q355, including plasma nitriding and calibration. 3D perforated table 4000 x 2000 x 200mm, 100mm grid, plate thickness 20mm, hole diameter 28mm. Surface finish machined, very robust, weight approx. 2400 kg. With table base, adjustable in 8 positions. Price excludes accessory set, surcharge €500. Packed in a wooden crate, shipping on request. The stated price refers to the table in standard version without plasma nitriding (last 4 pictures). Price for high-strength steel Q355, stainless and impact-resistant including plasma nitriding: surcharge €1800 (as shown). Bjdpfsyg Ex Dsx Acvslf

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,100 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 800 kg, REF: MM5446 Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification: ✅ Model - RMC10. ✅ Serial number - 18109. ✅ Date of manufacture - 2018. ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). ✅ Throughput - 1300 litres/hour. ✅ Filling system - Pure gravity. Bledpfex Dbkcex Acvof ✅ Speed variator - Inverter. ✅ Voltage - 415 V / 50 hz / 3 phase. ✅ Pneumatic supply - 3-6 bar.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Index G42 lathe with 3m rod loader fully functional. Max. rod diameter, m. 42mm. Machine has an automatic rod tacker. With chip conveyor and coolant container. Revolver VDI30 without driven tool stations. With internal cooling. Siemens control C200. Blodpfx Acox Nbk Nsvof Machine is sold because machine operator retired. A lot of accessories included, on rod guide bushings, collets etc. see pictures. Machine manuals and documentation available. Machine is picked up in our hall.

Condition: good (used), Machine vice base plate, clamping plate, vise plate, rotary table Bedsykzhvjpfx Acvelf -Rotary table: Turntable for vise -T- Round groove: 20 mm, dimensions see photos -Degree display -Dimensions: 350/320/H45 mm -Weight: 20 kg

Condition: good (used), Year of construction: 2007, - Spaleck Feeders . Type: SFLU 1950-300x3000 . L X W: 3.000 x 1.950mm. . Year of Manufacture: 2007 . Bledpfxexwn H Ds Acvof With 2 Pcs. Friedrich Unbalance motors of 2KW each, Springs and Frame with rubber springs. Feeders can be sandblasted and painted .

Condition: used, Rotary lobe pump Bljdpeyhhq Sjfx Acvof

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 92ML/109/11821, rotary table diameter: 1,220 mm, grinding height: 572 mm, total width: 4,394 mm, total length: 3,353 mm, overall weight: 13,700 kg, grinding wheel diameter: 711 mm, spindle speed (max.): 550 rpm, power: 35 kW (47.59 HP), table diameter: 1,219 mm, Lumsden 92 ML Vertical Spindle Rotary Surface Grinder , 48 Inch dia chuck, autosizing, table jog facility, Filtermist unit fitted with (2) extraction vents to rear of table guards, fitted with segmented wheel, serial number 92ML/109/11821. Machine tools manuals. Coolant filtration tank. Also with unused grinding stones segmented. Blodpfx Acjxgq D Devef Table Diameter 48″ / 1219mm, Segmental Wheel Dia. 28” / 711mm, Max. Height Capacity 22.5″ / 572mm, Spindle Speed 550rpm, Table Speed 6 & 18rpm, Auto Feed 0.004-0.04 ins/min – 0.1-1.0 mm/min, Spindle Motor 50HP / 35Kw, Floor Space 14′ x 11′ / 4394 x 3353mm, Approx. Net Weight 12T/12200Kg, Approx. Gross Weight 13.5T /13700Kg1220

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, rotary table diameter: 1,500 mm, grinding height: 457 mm, total height: 3,124 mm, total width: 3,150 mm, total length: 4,165 mm, overall weight: 15,000 kg, grinding wheel diameter: 863 mm, grinding spindle speed: 450 rpm, power: 45 kW (61.18 HP), table diameter: 1,500 mm, LUMSDEN Model 93ML Vertical Rotary Surface Grinder. Refurbished with new bearings in table and spindle, reconditioned main motor, new rectifyer, lubrication system, new control panel. Serial Number: to be advised New 1980's originally Country of Origin: UK Segmental wheel dia 34" Segments per set 16" Table dia and grinding capacity 60" Magnetic table dia (Humphreys) 60" Max height wheel to Magnetic table 18" Minimum height of wheel to table 4.1/2" Spindle speed 450 rpm. Table speeds 16 and 5.1/2 rpm. Automatic feeds 10 rates .004-.040 ins/min. Power elevation 25 ins/min. Spindle motor 60 Hp / 960 rpm 45 kW Table motor 6/2.1/2 HP /1440/480rpm. Feed motor 1/4 Hp / 1440 rpm. Elevation motor 1 Hp / 720 rpm. Coolant pump motor 1 Hp / 1440 rpm. Bljdpfx Acjwugh Dovsf Overall height of machine 10'3". Floor space 13'8" x 10'4". Approx net weight 15 tons.

Condition: used, Year of construction: 1999, functionality: fully functional, infeed width: 300 mm, We offer this used JENSEN VARIANT 2000 feeder, year of manufacture 1999. Blsdpfoyyvhksx Acvof Manufacturer: JENSEN Model: VARIANT 2000 Year of manufacture: 1999 Condition: used Type: feeder If you have any questions or require additional information, please contact us via message or phone. J E N S E N VARIANT 2000 dual-lane, fully automatic, with clamps working width - 3.0 m

Condition: used, Manufacturer: BONINO Type.: VD4N Sizes: D650x400 mm Electrical power: 220V; 2,0 A Power: 0,5 kW; 3000 cycles/min Bljdoyyhy Sjpfx Acvjf