Used Rope for sale (672)

Condition: good (used), Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm -Length: 40 m -Transport dimensions: 480/100/H480 mm Pjdpfoxbycljx Akierc -Weight: 20.3 kg

Condition: new, Year of construction: 2026, ⭐️ CAPACITY FROM 500 KG TO 10 TONS ⭐️ ⭐️ DIMENSIONS – custom production in any size ⭐️ Predowr Artjpfx Akioc ✅ Used with chain hoist or wire rope hoist. ✅ Fixed on the concrete foundation by anchor bolts ✅ Simple structure, convenient operation, small occupation space and large working range. ✅ Ideal lifting equipment for enterprises to improve efficiency and improve working conditions. ✅ Can replace bridge cranes and gantry cranes in many occasions, with low investment and high efficiency

Condition: used, Year of construction: 2007, machine/vehicle number: 001491U, For sale Used Abus single-girder overhead crane, approximately 7,550 mm span x 500 kg capacity. * Stored indoors * Technically 100% functional and inspected All our new and used cranes that we install and deliver come with a warranty! We can also supply our cranes with the following options: * Adjustment of length and/or height and possible repainting * Power rail / conductor bar * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists Prodpfx Akow I N T Usiec * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, overhead crane, gantry crane, workshop crane, warehouse crane, hoist. Overhead crane. Single-girder. Chain hoist.

Condition: new, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 3, loading space volume: 21 m³, loading space length: 4,200 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, tail-lift, Iveco 35S18H Diesel 3.0L - Flatbed with drop-side gate and tail lift, 750 KG capacity * AT ? Front axle Q-LEAF (transverse leaf spring) * CA ? Axle configuration 4x2 * DR ? Left-hand traffic (SX) * EP ? Engine F1C 176 EVI (176 hp) * GT ? 6-speed manual transmission (6M-500) * MT ? Permissible total weight 3.5 t * PT ? Rear axle mechanical (SPMN) * RW ? Single tires in the rear * VE ? Chassis with cab * WB ? Wheelbase 4100 mm ----Special equipment, exterior / vehicle * 72625 ? Full-LED headlights (daytime running lights, low beam and high beam) * 73024 ? Exterior mirrors for superstructures up to 2.35 m width Prjdpfx Asyz H Hyskisc * 14569 ? FMS data interface (telematics) Chassis * 06064 ? Reinforced parabolic springs in the rear * 01908 ? AGM battery 105 Ah Engine / Technology * 79570 ? Alternator with constant charging current * 02359 ? Axle ratio 3.59 Interior * 05925 ? Additional adjustable speed limiter * 08628 ? Storage compartment above the windshield * 00259 ? Comfort driver's seat, air-suspended, adjustable with lumbar support and armrest ----Packages * COMFORT package * 01619 ? USB port A+C * 01606 ? Infotainment system with 7-inch display * 06555 ? Front fog lights * 76104 ? Air conditioning (manual) * 02463 ? Cruise control * 07196 ? Air conditioning compressor 170 cm³ ----Additional vehicle data * 50105 ? Color White IC 194 * 20532 ? Tires 225/65R16 ECO * 33999 ? Standard use (no special superstructure) * 30164 ? Logistic Mode deactivated * 30001 ? Battery charged * 30560 ? Operating manual * 79443 ? Operating manual EMEA/APAC ----Superstructure / superstructure equipment * Aluminum side boards, 400 mm * Floor made of non-slip plywood (15 mm, waterproof) * Subframe made of aluminum profiles * Foldable entry step in the rear * Cab protection made of aluminum profiles * Lashing points (8 pieces) * Plastic fenders with splash guard * Tarpaulin superstructure (silver RAL 9006, 670 g/m²) * Light-transmitting tarpaulin roof ----Additional options, superstructure * Removable center post * Roof spoiler (white) * Side wind deflectors * Customs rope Tail lift * Type ? BC 750S2S * Load capacity ? 750 kg * Tare weight ? 200 kg * Arm length ? 750 mm * Lifting moment ? 5.62 kNm * Platform ? Aluminum * Platform dimensions ? 1610 mm x width adapted to the superstructure width ----Operation of the tail lift * External control with two joysticks * Deactivation of the tail lift in the driver's cab * 2-function remote control with cable ----Additional equipment * Mounting adapter * Seal set for the superstructure * Blinkers on the platform * Eyelets for customs rope WARNING! EXAMPLE IMAGES. Our special service for you: * Maintained according to the service booklet at contract partners and specialist workshops * Winter tires available at extra cost * Warranty insurance possible up to a maximum of 36 months for an additional fee * We will gladly and fairly take your used vehicle in payment! * Financing possible from 6.99% with and without down payment up to a maximum of 96 months, subject to credit approval * TÜV / DEKRA main and emission test * EU net sales possible - intra-community delivery with a valid VAT ID number * Sales to non-EU countries (worldwide) possible, including export registration, supplier declaration * We deliver your vehicle throughout Germany for an extra charge! * Registration service for customs license plates and short-term license plates including insurance and registration fees The information provided on the Internet is a non-binding descr

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: WIL9, Demag hall crane, portal crane, bridge crane including steel structure with floor control Dimensions of steel structure approx. 36 x 14.5 m with 1x Demag bridge crane 2.5 tons - gauge 14.3 m Payload/lifting capacity 2500 KG - 2.5 t Technical data of the system: Crane track/steel structure consisting of HEB200/HEA240 beams Length of steel structure approx. 35.75 m Overall width (outer edge of steel structure) approx. 14.5 m Overall height of crane approx. 6.2 m Top of running rails approx. 5.41 m Bottom of running rails approx. 5.17 m Top of bridge approx. 6.2 m Bottom of bridge approx. 5.68 m Hook height approx. 5.2 m Gauge 14.3 m Support spacing approx.: 6.1 + 6.1 + 6.1 + 6.1 + 6.1 + 5.5 m Prjdpfozdcd Sox Akioc System is delivered complete: Steel structure / supports made of HEA240, running rails HEA280 incl. power rail/power supply 1 bridge with 2500 kg Demag DH wire rope hoist with floor control Crane is disassembled and immediately available The location of the item is 75053 Gondelsheim Very good condition, see pictures Shipping by forwarding agent or collection only by appointment

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally with F805 incl. L436 Fly-Jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Hydrodrive Three steered axles STEERING/LIFT axle Front outriggers approx. 14,000 KG Superstructure: flatbed with sideboards 6200x2550x600 mm Steps Diamond plate floor Removable sideboards 9 x LED lights Extendable overwidth markings up to 3500 mm width Start/Stop Rotating beacon 8 x rung pockets 6 x lashing points 6500daN Tool boxes Tow hitch Storage compartments Storage boxes 20 ft container locking Perforated side profile lashing points 2500daN Crane: FASSI F805R.2.7, with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, Fly-Jib L436 with 6 hydraulic extensions, rope winch, cross-type radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, swiveling sheave, quick coupling between main boom and Fly Jib and more... TECHNO SERIES!! NEW CRANE model Slewing range endless All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle system with PROLINK (overextension of the knuckle arm up to 10°) Electronic overload protection system with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of Pressure range (in bar and %) and 90% + 100% warning on the display Danfoss D900 control unit with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, hydraulically extendable on both sides, outrigger width 10.00m, Outriggers operable by radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Driving position: folded across the direction of travel Note: Pay attention to the on-board voltage / 12V or 24V, standard 24V" Prsdpszcr N Usfx Akisc FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control unit » for the outriggers 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 additional functions with » 2 hose connections / hxp-techno Additional knuckle arm (Jib) L436, 6-fold » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct » for Jib mounted for 2 functions Control system for additional function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide when operating with additional knuckle arm (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the Jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (additional support frame) Electrical rotary distributor with 14 » sliding contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Additional cost for Dinitrol application (

Condition: used, mileage: 132,360 km, power: 240 kW (326.31 HP), first registration: 11/2008, fuel type: diesel, overall weight: 39,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2027, color: yellow, gearing type: automatic, Year of construction: 2008, Equipment: ABS, crane, electronic stability program (ESP), TADANO FAUN ATF 50 G3 MOBILE CRANE | 40 M TELESCOPIC BOOM | 10 T BALLAST | 6X6X6 VIN: WFN3RUKR382042164 VEHICLE: Faun Tadano ATF 50 G3 Mobile Crane * Year of Manufacture: 2008 * First Registration: 11/2008 * German Registration * Mileage: 132,360 km * Operating Hours: 14,465 h * Drive: 6 x 6 x 6 * Tires: 385/95 R25 (14.00 R25) * Remaining Tire Tread: 1. 10/60 % // 2. 80/70 % // 3. 10/20 % * Mercedes-Benz 6-cylinder OM 624 engine * 240 kW / 326 hp * ZF AS Tronic transmission Prodpfx Aozd Iixjkiec * 12 Forward Gears / 2 Reverse Gears * Central lubrication system for the upper carriage CRANE STRUCTURE: 40 m Telescopic Boom * 5-section main boom * 10 t Counterweight * Load chart available * Outrigger diagram available WEIGHTS: * Total Weight: 39,000 kg * 10t Ballast ACCESSORIES: Complete Documentation * Inspection books * Operating manual * Spare parts drawings * 4 new spare tires * 1 spare wheel on rim * 1 new hoisting rope * 1 used hoisting rope * Extensive spare parts package * Various electrical, mechanical, and hydraulic parts OTHER: From 1st owner * Very good overall condition * Regularly maintained * Last maintenance at 132,326 km / 14,462 operating hours * MOT: 06/2027 * Vehicle Inspection: 12/2026 * Crane Safety Inspection: 05/2027 * Tachograph Inspection: 11/2026 -- We will be happy to assist you with loading and organizing the transport. Contact us! We speak the following languages: German, English and Russian! No liability for printing & typographical errors, changes, prior sale and errors reserved! -- WHO ARE WE? -- Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The special strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! -- OUR SERVICE FOR YOU -- Loading of vehicles We will be happy to help you with loading your purchased vehicles. Organization of special transports We will be happy to help you organize special transports. Day registrations / Export license plates We will be happy to help you obtain export license plates / short-term license plates. Handling of customs formalities We will be happy to help you with handling customs matters.

Condition: refurbished (used), functionality: fully functional, - Reker multi-bucket excavator, 45 l bucket - Petersen multi-bucket excavator type EKBL 14/45/4, 45 l bucket; - multi-bucket rope excavator, 45 l bucket; - Rieter multi-bucket excavator type LBD -G30/4; - Rieter Werke box feeder type KBN - 6.0, belt width 1200 mm, length 6 m; - Haendle box feeder type BK1250/600x6; - Witte-Loehmer box feeder, upper structure approx. 3 m; - Large-sized Hochreuter und Baum box feeder with a 6 m upper structure, 130 m2; - Haendle box feeder type BKS 120b, 1508b; - Haendle box feeder type BKL 3.58; - Haendle box feeder type BKG 1035A Prodpfeymdf Nox Akijc

Condition: new, power: 110 kW (149.56 HP), fuel type: diesel, overall weight: 6,000 kg, color: white, gearing type: automatic, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, The ISUZU commercial vehicle center in Germany offers you competence, service, and advice: ISUZU M29 F with 9-speed dual-clutch automatic transmission + torque converter, demountable tipper body JOTHA 3512, snowplow, salt spreader 2-year warranty on the base vehicle from the date of initial registration Standard equipment: - 3.0 L turbo diesel with common-rail injection system with VGS turbo 110 kW / 150 hp EURO VI OBD-E (max. torque 375 Nm at 1,280 - 2,800 rpm) - Particulate filter system with DPD system and AdBlue (the self-cleaning system enables cleaning of the filter without a workshop visit, thanks to the new DPD regeneration technology, which indicates when the function is needed. You only need to press the DPD button and the system cleans itself in 20 minutes) - 9-speed dual-clutch transmission "ISIM" with torque converter. Smooth and precisely controlled starting is provided by an integrated fluid coupling! The gears can also be shifted manually using the gear lever. - Leaf spring suspension front axle (max. 2,300 kg), leaf spring suspension rear axle (max. 3,980 kg), stabilizer bar front - Tires 205 / 75 R16 C, single tires front - Twin tires on the driven rear axle, spare wheel - Engine brake, electric parking brake with Auto Hold - HSA - Onboard voltage 24 V, generator 90A, 2x battery 70 Ah - Diesel tank 70 L / AdBlue tank 14 L - BI-LED lighting with headlight cleaning system + rear LED lighting - Vehicle dimensions: cab width 1,815 mm, rear axle width 1,860 mm, height 2,150 mm (top of cab) - Suspended driver's seat - Passenger double seat bench, 3-seater, headrests, seatbelt warning - Driver and passenger airbags, seatbelt pretensioners for driver and passenger - Height and tilt adjustable steering wheel, steering wheel controls, interior mirror - Electric windows, electric adjustable and heated exterior mirrors - Electronic immobilizer - DAB+ radio with Bluetooth hands-free system, USB charging port - Fog lights, LED daytime running lights, automatic headlight control, LED taillights - Rear warning signal - Central locking with remote control - Digital EC control unit - Air conditioning Prjdezb Sg Depfx Akijc Equipment Safety Pack 2: - ABS: Anti-lock braking system - ASR: Anti-slip control on the rear axle - EBD: Electronic brake force distribution - EVSC: Electronic stability control - LDWS: Lane departure warning system - MOIS: Moving object detection - DWS: Distance warning system - MAM: Automatic emergency braking in front of an obstacle - FVSN: Field recognition - TSR: Traffic sign recognition - TPMS: Tire pressure monitoring system - RM: Rear view camera with monitor - BSIS: Blind spot monitoring system Power Take-Off (PTO) Delivery work: 0 - inspection according to the maintenance schedule, filling diesel + AdBlue, cleaning + de-preservation Vehicle body: Demountable tipper body JOTHA CombiCon 3512 - for mini-containers from 1-3 m³ with an outer width of up to 1,350 mm and containers according to DIN 30735 and flatbed containers in the size 1,220 x 2,400 mm - 2 separately controllable telescopic lifting arms, extension 1,000 mm - Hydraulic support at the rear - Container stops at the front, adjustable in pairs, and on the sides, adjustable four times - Lifting capacity on level ground: 3,500 kg - Chain suspension in galvanized design, length adjustable, and with safety snap hooks for container attachment - The high-dumping is carried out with guide ropes. - Body width: 1,700 mm, free passage between telescopic arms: 1,470 mm - Vehic

Condition: used, Year of construction: 2022, - Brand: Rees - Type : AMWP6100-5.6 Prsdpfx Aey A S Aiokiec - Year of construction: 2021 + 2022 - Weight: 810 kg. - Hours: 5 - 14 hours - Working height: 5.6 meters - Drive: 24-volt battery - Built-in battery charger (220 volts) - Length: 135 cm. - Width: 75 cm. - Height: 170 cm. - Non-marking tires - New safety inspection possible - Aerial work platform book available - CE document available - 7 x in stock - 5.6 meters - Trade-in and transport possible * Brand: Ropes *Type: AMWP6100-5.6 * Construction year: 2021 + 2022 * Weight: 810 kg. * Hours: 5 - 14 hours * Drive: 24 volt battery * Working height: 5.6 meters * Long: 135 cm. * Width: 75 cm. * High: 170 cm.

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 6 mm steel Upper wheel diameter: 150 mm Motorized rear roller delivery Right and left rotation via foot switch Prsdpfozl Dngjx Akiec Safety rope pull switch Conical rounding possible Weight: 1200 kg

Condition: good (used), Year of construction: 2011, machine/vehicle number: 152-010 564, Offer 26317 Technical data: - Electric wire rope hoist ABUS, operation via floor-mounted remote control Prodpfx Aez S H Aljkiec - Load capacity 3200 kg - Lifting speeds 0.7 / 4.0 m/min - Motorized trolley travel speed 5.0 / 20.0 m/min - Motorized slewing speed 0.15 / 0.61 RPM - Outreach 5000 mm - Hook height approx. 3000 mm - Bottom edge of boom approx. 3690 mm - Boom IPE 550 - Overall height approx. 4300 mm - Column diameter approx. 540 mm - Slewing radius 360 ° - Power supply 400 V - Total weight approx. 2000 kg

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 4,600 kg, Additional information Frame Pedpfxjk Unito Akiorc Steel welded construction made of fine-grain steel, hot-dip galvanized, flat platform without edge rim, slope of the loading area towards the rear axle by approx. 8° downwards. Longitudinal beams made of steel profiles, steel frame hot-dip galvanized, with NIRO sheet metal at the bend as a rope guide - flush with the floor. For trucks with wheelbase: 2nd axle 1,795 mm / 2nd to 3rd axle 4,105 mm and 3rd to 4th axle 1,350 mm Tow hitch Tow hitch ball head D24.8: (height from floor to top edge approx. 480 mm), towing capacity 2,800 kg, including mounting and electrical system with 7-pole socket Accessories/Modifications 2 holders for wheel chocks, aluminum side underrun protection, foldable - These are taken over from the truck! Steel underrun protection, quarter-shell fenders with mud flaps - These are taken over from the truck! Storage box Plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, can be locked with a padlock 1 holder for 3 pieces of gasoline canisters 1 stainless steel storage box, w=600/h=400/d=500 mm, with polished door, including locking mechanism, contains control valve and electro-hydraulic pump unit. Control box with all-round door seal and sealing sleeves on the back Electrical system Adjustment of the existing tail lights, 2 additional LED work lights, recessed in the front wall switched via parking lights with switch on the front wall outside on the driver's side, 1 LED work light, at the rear, with integrated reversing camera including color flat-screen monitor, screen with suction cup holder and power supply via 24 volts, voltage divider 24/12V, 1 7-pole 12V socket = adapter Floor Mega Grip made of interlocking galvanized grating, steel grating 50/4 including with a mesh size of 50 mm. Top side with anti-slip interlocking, continuously laid over the entire main frame platform Tie-down eyes 12 pairs of tie-down eyes in the outer frame, freely pivotable - each 10 tons. 1 at the very front and the last one at the very rear. 1 tie-down eye at the very rear in the middle for attaching the winch cable 12 tie-down eyes recessed in the center of the floor, each 5 tons. Front wall Front wall made of steel sheet, height 1,500 mm. Fixed with corner pillars at the front wall height. Each 2 x 12 mounting brackets for lashing chains mounted on the left and right on the front wall Winch Electric winch, 24 volts, pulling force approx. 6,350 kg, mounted in the center on the front wall (recessed with loading bridge), operated with a wireless remote control, rope length min. 35 m x 9.5 mm, with rope window, with rope pressure plate, including overload protection, rope free-running clutch, hand switch with approx. 5 m control lever, acceptance of the winch, civil engineer's test report, test book, operating manual Ramps Length 3,500 mm - 2-piece (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also when loading with ramps), electro-hydraulically foldable and laterally adjustable - including electro-hydraulic pump unit. Ramp angle approx. 8° with lowered rear axle Ramp surface made of steel grating, hot-dip galvanized, with anti-slip interlocking. Ramps can be slid together to approx. 170 mm, ramp extension hydraulically. Ramp prepared for operation on a loading ramp with full load capacity. Ramp locking with 2 tension straps. Ramp tip offset for resting on loading ramps. Labeling of the ramp operation. Lowering brake valve for lowering the ramp Support Adjustable support le

Condition: ready for operation (used), A complete UPG system for polyester resin granulate production is available. 1) High-speed Henschel fluid mixer FM 350C, speed: 1500 rpm, heating unit: Lauda. 2) Raw material supply system with 6 bunkers, screws and vibrating chutes. 3) Conveying system with a collecting tank located 9m above the mixer and a Demag 4t rope hoist. 4) Schenk fluidized bed cooler. 5) Engelsmann ED 250/4 flat bed screen. 6) Alpine B40/63 RO granulator. 7) 2 annular gap compactors Siemens. 8) 2 Kessler & Luch blowers, volume flow: 7000m³/h. 9) Aerobic filter, filter capacity: 4000m³/h. Documentation available. On-site inspection is possible. Pjdpowk Nk Tofx Akiorc

Condition: good (used), Year of construction: 2008, Geared motor, electric motor, electric geared motor for crane motor, crane drive, electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane undercarriage, crane undercarriage, trolley -Gear motor: from electric wire rope hoist VerlindeType VT202116 -Type: VT302116N15ELP5405SEM32MD -Motor: Type: MF06LA100-131F81001E-IP55 -Power: 0.65 kW technical data see photo nameplate -Shaft: Ø 25 x 30 mm Psdpswpffkofx Akiorc -Dimensions: 440/165/H180 mm -Weight: 9.2 kg

Condition: good (used), Year of construction: 2008, Geared motor, electric motor, electric geared motor for crane motor, crane drive, electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane undercarriage, crane undercarriage, trolley Psdjwpff Ropfx Akijrc -Handover/Price: in current condition as viewed -Gearbox housing: Damage see photos -Gear motor: from electric wire rope hoist VerlindeType VT202116 -Type: VT302116N15ELP5405SEM32MD -Motor: Type: MF06LA100-131F81001E-IP55 -Power: 0.65 kW technical data see photo nameplate -Shaft: Ø 25 x 30 mm -Dimensions: 440/165/H180 mm -Weight: 9.2 kg

Condition: like new (used), functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 400 t, operating speed: 3 mm/s, reverse speed: 18 mm/s, table width: 2,520 mm, table length: 6,000 mm, total length: 6,000 mm, total width: 3,650 mm, total height: 3,250 mm, overall weight: 28,500 kg, pressure: 319 bar, The TL-400-6000E hydraulic press belongs to the T/NC series and is custom-designed for straightening large welded structures and oxy-cut plates. Like all the hydraulic presses in the T/NC series, its design facilitates the loading and unloading of large pieces, plates, or structures. It allows access to different pressing points without the need to move the piece, thanks to the lateral movement of the cylinder and the longitudinal movement of the bridge. Power tn 400 Engine Power kW 11 Working Speed mm/s 3 Approach Speed mm/s 10 Return Speed mm/s 18 Maximum Pressure Bar 319 Piston Stroke mm 450 Lower Table mm 6.000 x 2.520 Front Clearance mm 2.560 Vertical Clearance mm 700 Head Displacement mm 1.900 Bridge Displacement mm 4.900 Working Height mm 800 Total Front mm 6.000 Total Side mm 3.650 Total Height mm 3.250 Weight mm 28.500 STRUCTURE AND TABLES • Features an electrowelded structure made exclusively from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed with finite element software. • Longitudinal bridge movement is achieved using a frequency inverter and toothed belt. • Lateral movement of the head is motorized and controlled via a frequency converter. CYLINDER AND HYDRAULIC GROUP • Double-acting cylinder with lapped sleeve, chrome-plated piston, and maintenance-free anti-wear guides. • Equipped with a removable and interchangeable pad to prevent wear on the piston and machined at the end to adapt to tooling. • Includes a standard anti-rotation device for the cylinder and a calibrated front with end-of-stroke switches to adjust the cylinder's travel. • Motorized hydraulic group with two speeds and automatic deactivation of high speed. • Includes a cylinder decompression valve. • Pressure regulator. • Glycerin manometer with tonnage reading. ELECTRICAL INSTALLATION AND SAFETY • The electrical panel includes a selector that allows choosing between manual or semi-automatic operation. • Also includes a selector for choosing high-speed approach or low-speed working. • Operation is carried out via a suspended control station with emergency stop and low-voltage operation. • Includes a maneuver confirmation button. • Includes a perimeter-mounted safety rope device. Prodpfxjwpgmvo Akisc

Year of construction: 1998, condition: excellent (used), machine/vehicle number: TH20010018, Demag bridge crane, crane canopy, crane track, indoor crane, crane Psdpov A Rr Defx Akiorc Payload / lifting capacity max. 3.2t - 3200KG, track 13300mm Outer dimensions with head carriage approx. 13500mm Crane with FU control and servo motors!!! 2x Demag DH rope hoist with floor and radio control RC-J for individual or tandem control of both hoists Height from top edge of crane to hook approx. 900mm Head carriage length with buffer approx. 2500mm Lifting height of rope hoist 6000mm Weight approx. 3200KG incl. 2x 25m guide rails HEB400 (400x300mm), incl. power rails!!! Beam lengths per side: 1x approx. 15m 1x approx. 10m Support spacing 10/10+5m Crane is dismantled, immediately available from location 75053 Gondelsheim Very good used condition ----- Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire about postcode Collection preferred

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: TD-RR, Altmann Cleanroom Crane + Steel Construction - Gantry Crane, Portal Crane, Crane System, Crane Runway, Hall Crane Altmann GmbH TYPE: ELP1.25-2.800E_RR Approximate dimensions L x W x H: 6.75 x 2.5 x 3.5 m 1 gantry crane with a load capacity of 1250 kg and wire rope hoist (controlled by radio and frequency inverter) The system is delivered complete: Steel structure/crane runway, free-standing + power supply 1 gantry crane, 1250 kg load capacity, incl. wire rope hoist Cover for the lifting mechanism is missing The crane is disassembled and immediately available The item is located in 75053 Gondelsheim Prodpfxozdbzis Akioc Very good condition, see pictures Shipping via freight forwarder or collection only by prior arrangement.

Condition: excellent (used), Year of construction: 1982, machine/vehicle number: EM518, Technical specifications: 1 Vetter TYPE B Demag column-mounted slewing crane, capacity 2500 KG, with wire rope hoist Useful load at full outreach: 2500 KG / 2.5 tons Height: approx. 6.65 m Outreach of jib: approx. 5.2 m Outreach: approx. 11.5 m !!! Hook height: approx. 4.3 m Total weight: approx. 5000 kg Column diameter: approx. 100 cm! With steel wire rope hoist, capacity 2500 kg Slewing range: 360° Podpfxszk Tngo Akierc Crane is dismantled and available immediately Item location: 75053 Gondelsheim Other cranes are available, with load capacities of 80-5000 kg, please inquire. See images. Shipping via freight forwarder or collection by appointment only.

Condition: new, axle configuration: 3 axles, Year of construction: 2026, Equipment: ABS, White aluminum Dimensions and Weights Height of the fifth wheel coupling: 1120 mm Inner side height below the longitudinal beam (from the outside) for the selected inner height: For h = 2725 mm, loading space: 2637 mm Neck height: 120 mm Overall length: 13882 mm Length of the inner platform: 13633 mm Outer width: 2550 mm Width of the inner platform: 2480 mm Inner width between the posts: 2480 mm Inner width between the longitudinal beams (lower longitudinal beam): 2430 mm Wheelbase: 1310 mm Distance: Kingpin to 1st axle: 6390 mm Total weight: 36000 kg Technical total weight: 42000 kg Permissible administrative axle load: 8000 kg Permissible technical axle load: 9000 kg Permissible fifth wheel coupling load (technical): 15000 kg Unladen weight: 5383 kg TECHNICAL DATA Chassis Wielton lamp carrier Wielton side impact protection – white solid filling Fixed rear underrun protection Steel rear underrun protection Steel impact buffer at the rear Perforated outer frame with continuous lashing points for securing the load Floor made of 30 mm screen printing plate, load capacity 7 tons Axles and Suspension Number of axles: 3 Fixed axles 1st lift axle Fifth wheel height: 1120 Axles: 3x9000 kg, 22.5 disc brake, ET=120, aggregate and clamps manufacturer: BPW Support legs SAF Hercules 2-speed geared landing legs, full load Fenders PVC fenders – shell, 2 front, 2 rear Rims 6x Steel rim 22.5-11.75 ET-120 Protective caps for wheel nuts Tires 6x Tires 385/65/22.5 – according to manufacturer's choice Other chassis equipment Ship fastening straps, 4 pairs Toolbox - 145L Two wedges with fasteners Customs rope/tarpaulin rope on the front wall (no customs seal) 1 retractable ladder at the rear 2 identification plates at the rear on the rear wall 565x200 ECE-R70 Predpfxjzyduve Akisc Superstructure Internal height: 2725mm Superstructure Sliding roof Front wall impact protection (metal plate) H=1500mm Tarpaulin tensioning device at the rear Standard tarpaulin tensioner Painted aluminum wall, Magnelis steel posts Sliding tarp, one-sided, from rear to front, EDSCHA HYBRID Rear wall as an aluminum double-wing door, steel posts Side tarpaulins with 24 tarpaulin tensioners, Pallet stop with lashing eyelets DC9.5 Braking system/Pneumatics Steel air tank Braking system Knorr The Knorr system is not compatible with Ford tractors Chassis painting Chassis painting RAL 7021 (black-grey) KTL coating Tarpaulin color Side tarpaulin color Polplan 018 ~ RAL 9006 (silver) Electrical system LED rear lights – 2 pcs 1X15-pole with EBS connection according to ADR Lighting LED Aspöck - EUROPOINT III with flashing side marker lights Additional systems A telematics system with access to a telematics portal for trailers and semi-trailers, which has a tire pressure monitoring system. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the wheels and a telematics device with a battery connected to the EBS. The telematics device supports 2G mobile networks and LTE Cat. M1. Includes a 12-month subscription for using the ATP telematics portal. Marking Partial contour marking on the side, yellow Partial contour marking at the rear, yellow Wielton warning sticker Designation in Polish Sticker set for ferry tarpaulins Certificates/Homologation Load securing certificate according to VDI 2700 DIN EN 12642 XL DC 9.5 certificate Beverage certificate Warranty The manufacturer provides a 24-month warranty on the vehicle, subject to the

Condition: used, mileage: 2,500 km, power: 375 kW (509.86 HP), first registration: 10/2026, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, MB ACTROS 2651 PRO-CABIN GIGA STX EXCLUSIVE HORSE TRUCK – 5 Horses ///NEW MODEL/// Prsdoz D Rf Tepfx Akiec 5 horses, side and rear ramp, -Out, pop-up roof, kitchen below, basement under the living area, storage compartments around the truck, 6 kW diesel generator, 550 liters of fresh water, 300 liters of wastewater, 5-6 sleeping places, living room, extra-large bed above the bathroom, rear entrance door, video monitoring and temperature monitoring for the horse compartment, LG stand-alone air conditioning, Kabola water heater with underfloor heating, dishwasher, 2 TVs/satellite, fine wood, bathroom, shower, toilet, air conditioning, kitchen, leather seating area, microwave, refrigerator and freezer, external saddle locker, rope winch, cruise control, alloy wheels, navigation system, air suspension, steerable rear axle, trailer hitch, and much more. Errors/input errors and prior sale are subject to change. * NET PRICE SALE POSSIBLE. * Top leasing offers Location and viewing of our vehicles: STX HORSE TRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service for all brands in the field of horse transporters and trailers. Please arrange an appointment in advance. Contact Richard Theurer / Andreas Theurer.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-2, empty load weight: 694 kg, maximum load weight: 2,006 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 306 170 2700 2 – Three-sided tipper NEW VEHICLE Internal dimensions: 306cm x 170cm Side panel height: 30cm Loading platform height: 75cm Total weight: 2700kg Payload: 2006kg Braked tandem axle trailer Overrun brake and parking brake by AL-KO 2x 1350kg axle and brake Podpfxozz N Sve Akiorc Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side panels with tensioning latch Can be folded down and removed on all sides 15mm thick, non-slip, and robust screen-printed wood floor Additional steel plate on wood floor Automatic jockey wheel with 400kg support load 8 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin connector LED side marker lights at the front Rear lamps with reversing light and triangle reflectors Upper frame mounted on rubber pads Large tipping angle of 49 degrees backwards Lateral tipping by repositioning the safety pins Hand pump with adjustable handle U-rail for attaching the original SARIS ramp OPTIONAL ACCESSORIES, PERMANENTLY REDUCED PRICES STARTING FEBRUARY 2026 - Equipment for 100km/h (shock absorbers) - Spare wheel with holder - Without side panels (price reduction) - Black Edition (Powder-coated side panels and rims in black) - Integrated ramps, 2800kg capacity - 35cm side panels - Battery charger - Electric tipping control - Remote control - Bluetooth remote control - Emergency hand pump in combination with electric operation - Safety support for maintenance work on a tilted vehicle - Folding crank for rear supports - Complete LED lighting - Theft protection - Net, fine or coarse mesh - H-frame - Leaf guard in various heights, also closed - Extension side panels 30cm with tensioning latch - Flat cover with or without bows - High cover 160cm - 200cm Further accessories available upon request! Plus freight to Gera and vehicle registration document 250 € net. Images are for illustrative purposes only and may show optional accessories at an additional cost. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pick-up. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repairs, including for caravan trailers. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. You will find a wide range of rental trailers with us. Visit us online or come directly!

Condition: used, Year of construction: 2003, Item No.: Lg 35626 Coil handling system KOHLER 30.400/9 - 2000.2H used Year of manufacture: 2003 Machine No.: 70330 Working direction: from left to right Loading side: rear Consisting of: Double unwinding reel 2000.2H Load capacity: max. 2,000 kg/side Coil width: 85 to 400 mm (when using a pressure arm) Spreading range: 360 – 420 mm Outer diameter: max. 1,800 mm Spreading: hydraulic/sliding wedge system + Automatic retension Drive: 2 x hydraulic motor + auxiliary drive for coil feeding and rewinding Braking: spring-loaded/disc brake Coil diameter-dependent control Lateral displacement: motorized Displacement distance: approx. 200 mm Base frame: frame construction Swiveling: motorized 180°, locking pneumatic, actuated wedge Counter bearing: manually attachable with quick-release fastener, open construction Coil loading: by means of rope or strap Spreading: The spreading is carried out hydraulically via a sliding wedge system. The reel is additionally equipped with an automatic retension system, so that the clamping pressure is maintained for several days. Counter bearing: The counter bearing is designed as a ring strut construction and can be attached manually. Two effective quick-release levers ensure a secure hold. The lightweight construction made of square tube profile in an open design has a total weight of approximately 15 kg with an outer diameter of 1600 mm. Automatic brake control/coil diameter dependent A diameter-dependent brake control is achieved via a proportional valve. During the acceleration and deceleration phase, the braking effect is automatically adjusted via a correspondingly controlled proportional pressure control valve. This control technology guarantees smooth coil unwinding. Base frame with motorized lateral displacement of the reel 2 x pressure roller, swiveling: The pressure roller is used to feed the coil into the straightening machine. It also prevents the coil from jumping when the coil strapping is released. The swiveling of the roller, which is coated with plastic, is carried out hydraulically. The contact pressure can be adjusted continuously. The drive of the roller is carried out via a hydraulic motor. Coil straightening machine 30.400/9 Passage width: max. 400 mm Number of straightening rollers: 9 pcs. Straightening roller diameter: 30 mm Straightening roller material thickness: 0.4 – 3.0 mm Roller stand adjustment: motorized (2-point) The complete straightening roller bearing is mounted on a slide plate at the top and bottom and can be manually moved in and out. Measuring device: digital Measuring display: metric Setting accuracy: 0.01 mm Straightening roller bearing: needle bearing Bearing sealing: shaft seals Podezpbazopfx Akisrc Straightening roller hardness: HRc 60 Straightening roller surface roughness: 0.001 mm and better Straightening roller drive: individual drive Gearbox: distribution gearbox Lubrication: grease lubrication of the straightening roller bearing Oil circulation lubrication of the cardan shafts Drive: three-phase motor with frequency control Speed: 0 - 40 m/min Number of coil feed rollers: 2 Coil feed roller diameter: 120 mm Coil feed roller adjustment: pneumatic Drive coil feed: both rollers from the straightening machine gearbox Surface coil feed rollers: like straightening rollers

Condition: like new (used), functionality: fully functional, fuel type: diesel, fuel tank capacity: 10 l, color: blue, overall weight: 1,950 kg, maximum load weight: 850 kg, first registration: 09/2021, Year of construction: 2021, machine/vehicle number: 3410C600, Equipment: crane, Based on the information provided, the description in English would be as follows: Prjdsy Rpd Tspfx Akioc "We offer a like-new Hoeflon C4 mini crawler crane from the year 2021. The crane is in impeccable condition, freshly serviced, with a valid lifting equipment inspection, spare tracks, and additional accessories included. Maximum load, horizontal with retracted boom: 700 kg Maximum load, horizontal with extended boom: 500 kg Maximum winch load: 425 kg Maximum load in double-rope mode: 850 kg Total weight including boom: 1,900 kg Boom weight: 150 kg Boom profile weight: 18 kg Ballast weight: 140 kg Block and hook weight: 25 kg Winch head weight: 9 kg Transport width: 750 mm Transport height: 1,750 mm Transport length with boom: 3,150 mm Transport length without boom: 2,910 mm Maximum outrigger load: 2,300 kg/outrigger Maximum outrigger footprint: 4,340 x 3,430 mm Electrical supply voltage: 230 V Electrical frequency: 50 Hz Electric motor power: 3.0 kW Petrol engine power: 8.2 kW Fuel tank capacity: 6.1 l Battery voltage: 12 V Battery capacity: 44 Ah If you have any questions or require further information, please send us a message or call us by phone."