Used Rope for sale (630)

Condition: used, Year of construction: 2022, - Brand: Rees - Type : AMWP6100-5.6 - Year of construction: 2021 + 2022 - Weight: 810 kg. - Hours: 5 - 14 hours - Working height: 5.6 meters - Drive: 24-volt battery - Built-in battery charger (220 volts) Psdpfoy A S Aijx Ad Segr - Length: 135 cm. - Width: 75 cm. - Height: 170 cm. - Non-marking tires - New safety inspection possible - Aerial work platform book available - CE document available - 7 x in stock - 5.6 meters - Trade-in and transport possible * Brand: Ropes *Type: AMWP6100-5.6 * Construction year: 2021 + 2022 * Weight: 810 kg. * Hours: 5 - 14 hours * Drive: 24 volt battery * Working height: 5.6 meters * Long: 135 cm. * Width: 75 cm. * High: 170 cm.

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, load capacity: 2,850 kg, For sale is a hall crane system by Konecranes (Trost & Hilterhaus). The system is in good condition and has been serviced regularly. Pgedpfx Ajykbd Dod Ssr TECHNICAL DETAILS - Load capacity: 2,850 kg - Model: Konecranes CXT 300 - Year of manufacture: 1998 - Span: approx. 11.2 m (as per system planning) - Crane runway: Suitable runway girders (profiles IPE 300 / IPE 200) included MACHINE DETAILS - Manufacturer: Trost & Hilterhaus GmbH / Konecranes - Project number: 15513/98 - Components: Complete bridge including end carriages and electric wire rope hoist - Electrical data: Control voltage 48 V EQUIPMENT - Radio remote control including charging station - Control cabinet (fully equipped with Schneider/Telemecanique components) - Documentation / structural analysis available - Paintwork: RAL 3000 (flame red) / bridge - No runway rails included; up to 50m can be offered additionally if required Transport and loading can be organized Europe-wide for an additional charge upon request. All prices are subject to VAT. Inspection possible by appointment. Please contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact details, please visit our website.

Condition: used, functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2466568, load capacity: 200 kg, lifting height: 9,950 mm, platform length: 1,200 mm, platform width: 960 mm, overall weight: 6,550 kg, transport length: 5,480 mm, transport width: 1,200 mm, transport height: 2,160 mm, fuel type: electric, tire size: 0,60 m x 0,19 m, color: red, Equipment: UVV, Technical specifications - Year of manufacture: 2020 - Working height: 11.95 m - Platform height: 9.95 m - Platform dimensions (LxW): 1.20 x 0.92 m - Load capacity: 200 kg - Total weight: 6,550 kg Psdjyqyhhspfx Ad Segr - UVV: new - Drive: electric 2WD Fully functional, general signs of use, 2WD drive, integrated charger, Climbing ability: 25%

Condition: new, functionality: fully functional, power: 18.4 kW (25.02 HP), fuel type: diesel, color: yellow, overall weight: 3,759 kg, operating hours: 10 h, machine/vehicle number: NEU, Equipment: cabin, Technical data Year of manufacture: New Operating hours: 10 h Engine: Perkins diesel 18.4 kW / 24.6 HP Operating weight: 3,759 kg Dipper arm: 1.60 m Tear-out force: 19.70 kN Breakout force: 32.40 kN Boom swing left/right: 75 / 55 Digging depth: 3.30 m Trenching bucket: 0.30 m Pjdpjyqzp Tofx Ad Ssgr Trenching bucket: 0.60 m Fixed grading bucket: 1.20 m Quick coupler system Full cab included Heating included Price on request

Condition: new, axle configuration: 2 axles, Year of construction: 2023, Galvanized bale wagon • Dimensions: 6500 x 2500 mm • Load capacity: 12 tons • RDW approved • Checker plate floor • Mitas tires 500/50/17 • Air and hydraulic brakes Pedpfx Aozbmd Dod Sjgr • Rope hooks • Lighting and reflectors Condition: New Year of manufacture: 2023

Condition: good (used), lifting height: 16,350 mm, Year of construction: 2017, Empty weight: 10.250 kg Lifting capacity: 4.900 kg CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Production country: JP Please contact Christian Theißen for more information Manufacturer: Maeda Model: CC985 S-1 Year of build: 2017 Condition: Used Data: Max. working height: 16,35 m Max. lifting height: Hook height 20.30 m Lifting capacity: 4.900 kg Drive type: Drive steel chain Ground pressure: 52 kN Gradeability: 22 % Ground clearance: 0,13 m Drive type: Diesel Total dimensions LxWxH: 5,02 x 2,36 x 2,80 m Empty weight: 10.250 kg Podpfxey T Inco Ad Ssgr Special features: Mini crane, mobile with loads up to max. 2,000 kg, max. outreach 14.52 m, rope length 115 m.

Condition: used, functionality: fully functional, machine/vehicle number: 001658U, load capacity: 6,300 kg, For sale Used Demag single-girder overhead crane, approximately 18,100 mm span x 6,300 kg capacity. Ref. 001658U * Stored indoors * Technically 100% operational and inspected All our new and used cranes, which we deliver fully assembled, come with a warranty! We can also supply our cranes with the following options: * Adjustment of length and/or height and, if required, repainting * Power rail / conductor bar system * Radio remote control * Tandem control * Installation and inspection Jan Reiling B.V. also offers: * New lifting equipment * Spare parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. Pjdpfezilbpsx Ad Segr For more information, please visit the Jan Reiling B.V. website. Cranes, crane, gantry crane, workshop crane, warehouse crane, hoist, cranes, hall cranes, bridge cranes, workshop cranes, storage cranes, lifting equipment, cranes, universal crane, hoist. Overhead crane. Single-girder. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001663U, load capacity: 10,000 kg, For sale Used Demag single-girder overhead crane, approximately 16,500 mm span x 10,000 kg capacity. Suitable for outdoor use. Ref. 001663U * Technically 100% in order and inspected. All our new and used cranes, which we supply with installation, come with a warranty! We can optionally supply our cranes including: * Adjustment in length and/or height, and possible repainting * Power rail / conductor bar system * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, overhead crane, gantry crane, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment. Pgodpszilfuefx Ad Sor Overhead crane. Single-girder. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001668U, load capacity: 1,000 kg, For sale Used Demag single-girder overhead crane, approximately 12,300 mm span x 1,000 kg capacity. Ref. 001668U * Stored indoors * Technically 100% operational and inspected All our new and used cranes, which we deliver installed, come with a warranty! We can also supply our cranes with the following options: * Adjustment of length and/or height, and repainting if required * Power rails / conductor bar * Radio remote control * Tandem control * Installation and inspection Pjdezilrnopfx Ad Sogr You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, crane, roller bridge, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment. Overhead crane. Single-girder crane. Chain hoist.

Condition: used, mileage: 163,075 km, power: 162 kW (220.26 HP), first registration: 01/1998, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, color: orange, gearing type: mechanical, emission class: euro2, loading space volume: 6 m³, loading space length: 4,500 mm, loading space width: 2,420 mm, loading space height: 600 mm, Equipment: ABS, all wheel drive, crane, parking heater, * ABS * Analog tachograph * Mirror heating * Roof hatch * Rear window * Driver comfort seat * Seat heating * Front axle differential lock * Rear axle differential lock * Transfer case * Off-road reduction gear Pgodpfxsylra Sj Ad Sor * Air dryer * Trailer coupling * 2-line air connection * Duomatic air connection * Ball-type coupling * Auxiliary heater * Front axle engageable * Exhaust behind cab * Electrically adjustable mirrors * 6-speed * Suspension: leaf springs * Payload: 1840 * Continuous brake: engine brake ----Special body: Crane: Atlas AK 60.1, folding, radio remote control + ground control, 1 hydraulic + 3 manual extensions (working height approx. 12.3 m). Load chart readings: lifts 3.1t @ 1.9m, 1.76t @ 3.5m, 1.22t @ 4.9m, 0.93t @ 6.4m, 0.60t @ 7.9m, 0.40t @ 9.3m. ----Body: Flatbed platform, reinforced front wall, hardwood floor, lashing rings, extendable center and rear stanchions. ----Rotzler front winch type Treibmatic TR 030, remote cable control, pulling force 50 kN, 190 bar, rope diameter 13 mm, rope length 60 m, max. rope speed 30 m/min. Sale to commercial customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE !!!!! ALL INFORMATION GIVEN WITHOUT WARRANTY, INCL. EQUIPMENT & ACCESSORIES. All contracts, invoices, proforma invoices, orders, and sales negotiations are based on our general terms and conditions (see legal notice/imprint).

Condition: good (used), Crane block, crane hook, load hook, single hook, bottom block Pgedjw Tin Aepfx Ad Sor -Crane block: Crane hook load capacity t -Rope groove: see photos -Dimensions: 420/170/90 mm -Own weight: 6.3 kg

Condition: good (used), Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull Pgsdpfxsxbd Ixo Ad Sjr -Rope diameter: 11 mm -Length: 24 m -Transport dimensions: 400/400/H100 mm -Weight: 14.5 kg

Condition: good (used), Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 10 mm -Length: 10 m Pgsdpfxoxbd Rtj Ad Sjr -Transport dimensions: 370/330/H130 mm -Weight: 3.9 kg

Condition: used, Sheet lifter - Sheet clamp - Universal lifter Carrying clamp, beam clamp, lifting tackle for horizontal sheet transport Pgedpfx Aexciwzsd Sor Lifting gear for horizontal sheet transport DOLEZYCH type Dolast K15 Year of manufacture: 1997 Load capacity per clamp: 3 t Maximum load capacity: 6 t (for the twin lifting tackle) Clamping range: 0–51 mm Sheet thickness: 4–50 mm Wire rope length: 1.5 metres - Two-leg wire rope sling with eye - 2 lifting clamps included Own weight approx. 45 kg The lifting gear is suitable for lifting single steel plates or bundled sheet packs. Price quoted per lifting gear, 2 units available.

Condition: as good as new (ex-display), For sale Pjdpfoh Up Uvex Ad Sjgr Hoist motor used/reconditioned for a DH wire rope hoist NB! we have more than 15,000 Demag parts in stock see our website or other ads

Year of construction: 1976, condition: used, machine/vehicle number: TH20010161, Demag bridge crane, crane canopy, crane track, indoor crane, crane Payload / lifting capacity max. 10t - 10000KG, track 11750mm Outer dimensions with head carriage approx. 12000mm with steel hoist and floor control Height from top edge of crane to hook approx. 900mm Head carriage length with buffer approx. 3500mm Pjdpfxsv A Sa Ns Ad Ssgr Lifting height of rope hoist 10000mm Crane weight approx. 4000KG incl. 2x 25m guide rails HEB280, incl. conductor rails!!! Beam lengths per side: 1x approx. 10m 1x approx. 15m Support spacing 10m/10+5m Crane is dismantled, immediately available from location 75053 Gondelsheim Used condition ----- Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire about postcode Collection preferred

Condition: used, functionality: fully functional, Year of construction: 2021, overall weight: 368 kg, total height: 900 mm, total length: 3,070 mm, total width: 820 mm, load capacity: 1,500 kg, latticeMastWinch Pgodpsya Ixyefx Ad Ssr Producing company Manitou Type PT 1500 Year built 2021 Height (mm) 900 Length (mm) 3,070 Lifting weight (kg) 1,500 Weight (kg) 368 Width (mm) 820

Condition: used, machine/vehicle number: WFDFLT33902030059, empty load weight: 7,452 kg, maximum load weight: 27,548 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2023, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space height: 2,655 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,005 mm, suspension: air, tire size: 385/55 R22,5", color: black, The images shown are archive images; the vehicle may still be in use! Weights and Dimensions: Permissible / technical gross weight: 35,000 / 39,000 kg Permissible / technical payload approx.: 27,548 / 31,548 kg Permissible / technical aggregate load: 24,000 / 27,000 kg Permissible / technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 7,452 kg +/- manufacturing tolerance Overall length approx.: 13,800 mm Overall width max.: 2,550 mm Overall height approx.: 4,005 mm Internal length approx.: 13,460 mm Internal width approx.: 2,470 mm Internal height front approx.: 2,655 mm Internal height rear approx.: 2,853 mm Volume approx.: 92 cbm Fifth wheel height approx.: 1,130 mm King pin installation dimension approx.: 1,640 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer for Forwarding Fine-grain steel lightweight welded construction, up to the landing legs, fifth wheel plate with replaceable 2" king pin. Prepared lashing rings integrated into the floor (max. 13 pairs) 24-ton two-speed landing gear, single-sided operation, straight lower part, without load equaliser Pull-out ladder at rear Door retainers on the sides Wheel chocks with holder Aluminum side underrun protection Steel rear underrun protection with wide Fliegl mud flaps Foldable fender for lighting unit Quarter shell mudguards Rear impact protection Axles & Suspension BPW disc brake axles Air suspension 1st axle with automatic lift axle, including forced lowering and start assist, activation via triple brake application Brake System Two-line compressed air brake system Colour-coded line routing for easier servicing Spring-loaded parking brake Two fail-safe coupling heads at front, without connecting line EBS, electronic braking system with EBS socket at the front, no connecting cable Wheels 385/55 R22.5" Electrics 24 volt, multi-chamber lights, yellow side LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at the front, without connecting cables SB Hydraulics Hydraulic cylinder with sliding unit integrated in the floor. Dual-circuit hydraulics. Note: A dual-circuit hydraulic system is required! Recommended pump capacity: Capacity: 110 l/min Pressure: 250 bar Min. oil tank capacity: 100 l SB Tipper Body Podpfx Adswk Dc Ro Sogr Aluminum box-type tipper body made from high-grade, wear-resistant material. Front and side walls made from aluminum hollow sections, welded with a wide special reinforcement profile around the top and a special reinforcement frame at the bottom. Sliding bulkhead for improved unloading of cargo, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminum hollow sections as a two-leaf door, split 1/2 to 1/2, framed all round with a special U-profile with stop and rubber seal, fitted with two external rotary bar locks, locked at top and bottom. Rear wall with mechanical safety lock, operated at the rear on the left side in direction of travel. Including a swivelling crossbar at the top. Standing platform with ladder access on both sides (left/right in direction of travel) and guardrail for opening and closing the roof tarpaulin Removable, swivelling crossbars for tarpaulin support + tarpaulin support at front bulkhead and at rear wall. Roll tarp can be stored on one side with two longitudinal tension belts, 3 ratchet tension belts on the side. The tarp is fastened with hooks and rubber ropes at the front bulkhead and above the rear doors; features

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2023, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Axle lift for 1st and 3rd axle incl. drive-off aid, operation "3x brake activation" ROTOS SCB running gear system (disc brake) Schmitz Cargobull floor fully sealed around the perimeter and between floor joints 2 wheel chocks with holder Front wall anodized, steel corner posts galvanized Pedpox Ayf Nofx Ad Sogr Rear wall anodized, STEEL corner stanchions galvanized Load securing: body certified according to EN 12642 XL with beverage certificate Main beam height front 125mm, rear 400+28mm, Smart Generation Spare wheel holder, basket design, bolted for 2 spare wheels, behind the unit Continuous lashing points in the outer frame 2 LED reversing lights, separate 2 steel corner supports at the rear for SCHMITZ sliding roof, with integrated curtain tensioner Additional pair of straight plastic mudguards between the axles Row(s) of ALUMINIUM sideboards with V-profile Curtain tension ratchet at the front All-round curtain rope with holder on the front wall (not a customs seal) Tyre brand SCB "SELECTION" Continental/Goodyear/Dunlop/Hankook/Pirelli/Bridgestone Regional transport tyre tread (M+S) Plastic toolbox with lid holder, shelf, and drawer behind the unit With German registration documents The vehicle complies with EC type approval with Certificate of Conformity (CoC) Rear contour marking all around, color: red Side contour marking on curtain, color: white Wheels & tires: 385/65R22.5 Despite careful inspection, input or data transmission errors cannot be excluded. All information, including equipment, is therefore non-binding and without guarantee. Prior sale, changes, and errors reserved. This advertisement does not constitute a binding offer within the meaning of § 145 BGB, but is for information purposes only. Binding equipment specifications are stated exclusively in the purchase contract.

Condition: used, functionality: fully functional, Year of construction: 2019, overall weight: 1,550 kg, total height: 2,580 mm, total length: 1,200 mm, total width: 1,240 mm, load capacity: 23,000 kg, winch Producing company Manitou Type TREUIL 23 Ton Year built 2019 Height (mm) 2,580 Length (mm) 1,200 Lifting weight (kg) 23,000 Weight (kg) 1,550 Width (mm) 1,240 Pgjdpfx Adexpya Hs Ser

Condition: new, DEMAG Spare Parts: 1. Transmitter / Circuit Board DRC - DR D3 2. Load Measuring Pin DMR 20 3. CAN Safety Transceiver 4. Brake Ring / Conical KB 160 B - 2 pieces 5. Brake Ring / Conical KB 100 B - 2 pieces 6. Clutch Set 7. Brake Disc 13KF - 3 pieces 8. Swivel Eye DK 20 - 2 pieces 9. Torque Support Set MA 125-1 - 2 pieces 10. Magnet Body for Brake B140 - 1 piece + B050 - 2 pieces 11. Wire Rope Diameter 16 mm - 35 meters 12. Wire Rope Diameter 10 mm - 62.8 meters 13. Gear Limit Switch DGS 3 Pgedowug Nujpfx Ad Ssr

Condition: new, Ostas 3-Roll Round Bending Machine SMR-S 1070 x 130 Technical Specifications: Special equipment included in the price: hardened rolls motorized rear roll adjustment digital display sheet metal width 1070 mm sheet metal thickness 7.0 mm max. sheet metal thickness 6.0 mm for pre-bending roll length 1070 mm Pjdpfx Adoiw D Dmj Sogr smallest diameter 195 mm roll diameter 130 mm weight 1150 kg dimensions L-W-H 2550 x 630 x 1020 mm motor 3.75 kW Equipment: top and bottom rolls driven by electric motor top roll can be swung out conical bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel safety rope, CE marking Values apply to St-37 / 240 N/mm²

Condition: used, mileage: 326,000 km, power: 132 kW (179.47 HP), first registration: 02/2013, fuel type: diesel, maximum load weight: 7,100 kg, overall weight: 12,000 kg, tire size: 265/70r17.5, axle configuration: 4x2, wheelbase: 3,690 mm, next inspection (TÜV): 06/2023, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, loading space length: 3,900 mm, loading space width: 2,400 mm, loading space height: 600 mm, Year of construction: 2013, Equipment: ABS, air conditioning, car registration, hydraulics, IVECO EUROCARGO ML120EL18 CUBE - Chassis ZCFA1ED04D2607352 YearEURO 5 Mechanics: 4 cylinder common rail Tector - 3920 cc - 180 hp - km 326,769 Manual transmission ZF 6 speed + rm Bodywork: exterior cab color white \ interior cab color white Tires: dim. 265/70r17.5 STRUCTURE: 3690 mm wheelbase - Short cab - Mechanical front and rear suspension. Total weight on the ground: 119.90 - Useful D. 70.90 TECHNICAL TRUCK EQUIPMENT: Lowered El Version, Air Conditioner, Euro 5, Manual Transmission 6 Speed + Rm - Zf 6s 700 To, Abs, Brake Engine With Retarder Function, Cruise Control, Power Steering, Immobilizer, Clutch Servo, Limiter Electronic Speed Limiter, Pneumatic Driver's Seat, Electric Windshield Lift, Electric And Heated Mirrors, Fog lamps. Heated, Fog Lights EQUIPMENT: THREE-SIDE TIPPER Outer Dim. Width 246 cm * Length 410 cm* H 60 cm FE 52 sheet metal platform, Front cab guard with safety net, H 600 alloy side rails in TRS, Tailboard rear with flag opening, No. 2 PVC fenders, No. 1 PVC toolbox, guards Podpfsn Amt Ejx Ad Sogr side, No. 4 winches with rope tensioning hooks, removable rear stand. Documents: Nationalized - Certificate of Approval For viewing and road test, contact Valerio Roscini at.

Condition: new, Year of construction: 2024, SCHORR trencher RR600GF cable trencher 12.4hp 420cc E-start manhole trencher The RR600GF trencher is your reliable partner for demanding ground work. Equipped with a powerful 420cc four-stroke engine that delivers an impressive 12.4 hp, the machine effortlessly tackles even the toughest soil types. Thanks to the 27 robust carbide milling teeth and the constant power output through the centrifugal clutch, you can always work efficiently and precisely. It is easy to start using the electric starter. SCHORR trencher RR600GF- Discover the advantages: -- 420cc 12.4 hp petrol engine with electric starter -- 60cm cutting depth stepless -- 60m/h milling performance -- 27 carbide teeth -- With parking brake -- High user-friendliness -- Super compact design - easy to store and transport -- Extremely robust and reliable Technical data Manufacturer (abbreviation): SCHORR Manufacturer's type designation: RR600GF Starter: Reversing starter (rope pull) + electric starter Number of milling teeth: 27 Max. Milling depth: 600mm Max. Milling speed: 60m/h Own weight: 188kg Basic dimensions Overall length: 2143mm Pjdpfx Ajua Thqed Sogr Overall width: 904mm Overall height: 1233mm Handle width: 623mm Motor Max. power: 9,4kW / 12,4PS Displacement: 420ccm Fuel type: Gasoline *Further technical data available on request. With ergonomically designed operating elements and intuitive controls, the trencher is easy to operate. Thanks to the two tubeless main wheels, the trencher can be conveniently transported to its destination. The trencher has a locking system for the wheels, which prevents them from accidentally rolling away during operation. The trencher is an indispensable tool for construction projects that require precision and efficiency. With its ability to quickly and accurately dig trenches in different soil types, it offers huge time savings compared to traditional methods such as shovels or excavators. By using a trencher, projects can not only be completed faster, but also with less manpower and lower operating costs. The machine is ideal for laying cables, pipes and irrigation systems as it creates clean, even trenches and minimizes soil excavation. Of course, we usually have all spare parts in stock and can deliver them quickly if you do have a problem. If you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. Would you prefer to finance or lease the appliance? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any questions you may have about our ride-on sweeper. at your disposal. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: new, pressure 500 t column daylight 600 mm stroke 600 mm table surface area 3500 x1500 mm 600 mm feed down 8 mm/sec feed up 16 mm/sec travel on the bed 2200 x 900 mm total power requirement 30 kW weight of the machine ca. 28 t 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are precision-milled using a CNC milling machine - Chrome-plated cylinder - Worktop with threaded holes HYDRAULICS - Bosch Rexroth hydraulic pump - Hydrapack or Badestons hydraulic directional control valve - Hydraulic block in accordance with EN standards - 1000-liter hydraulic oil tank - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet in accordance with EN standards Pgjdsfv Awhopfx Ad Ser - All cables are labeled and clearly arranged - All electrical components are from Siemens CONTROL PANEL - Stroke control in any position - X, Y, and Z-axis movement via remote control - Stroke adjustment via sensor SAFETY - The machine complies with the EC safety standards 2006/42/EC Machinery Directive, EN ISO 16092-01 and 16092-03 - Two-hand operation - Emergency stop button - Safety rope with switch around the press 4. TRANSPORT AND INSTALLATION – The price includes transport costs, installation, and training at the customer's factory. – Hydraulic oil is not included in the price. – All handling costs (e.g., crane, forklift, etc.) are borne by the buyer. 5. WARRANTY – The machine has a 2-year manufacturer's warranty. – This warranty covers the delivery of all spare parts required for repair and service of the machine. Damaged parts will be returned to the manufacturer after replacement with a new part. – This warranty does not cover parts damaged due to improper use.