Used Rolling Mills for sale (16,645)

Condition: used, Year of construction: 2016, x-travel 1020 mm y-travel 700 mm z-travel 500 mm Cjdj Aaq T Aepfx Aqveri control Heidenhain iTNC530

Condition: used, mileage: 416,342 km, power: 330 kW (448.67 HP), first registration: 05/2013, fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Mercedes-Benz 2545 Roll-off System Palfinger 6x2 Wheelbase: 4.95 m Suspension: Leaf spring/air Palfinger Roll-off System Type: T20 Length 6.15 m to the center of the rollers Special Equipment: Front axle load 8.0 t, Work lights on the rear wall of the cab, Audio system: CD radio comfort (Bluetooth), Brake connection standard and DuoMatic, Compressed air connection in the cab, Air horn, Suspension: Front springs 8.0 t, 2 leaves, Tinted windshield, Fuel tank: 630 L aluminum, Cool box / refrigerator, Air intake on the side of the cab, Trailing axle steered, liftable, Auxiliary drive MB 131-2c, Configurable special module, Frame lowering without air spring residual pressure control, Retarder, Reversing warning system acoustic (warning signal outside), Drawers under the dashboard, Seats in the cab: Driver's seat, comfort suspension seat, External sun visor, Side window sunblind, Driver's door, Additional 24V socket in the passenger footwell, Fleetboard preparation, Additional thermal insulation, Oil cooler for transmission Additional Equipment: Emission standard EURO 5, Axle configuration: 6x2, Actros 4, Trailer brake 2 - line, Connections on the left, Trailer socket 24V / 15-pole, Exterior mirrors, electrically adjustable and heated, Differential lock rear axle, Compressed air tank steel, Compressed air unit medium, Cab: Width 2.30 m, Cab: L StreamSpace, Cab variant: StreamSpace, Electrically operated sunroof, Preparation for upper comfort bunk, wide, Cab: steel-sprung, comfort, Cab floor with engine tunnel 170 mm, Cab: mounting height 600 mm, Suspension: leaf spring / air, Electric window lift, Generator 100 A, Gearbox 12-speed - Type: G 211-12, Urea tank (AdBlue): 60 L, Rear axle, crown wheel 440, Info display 10.4 cm with additional display, Lower comfort bunk, Comfort locking system, Communication interface, Radiator grille, Steering pump, regulated, Air compressor 2-stage, Engine 12.8 L - 330 kW R6 diesel (OM 471), Engine brake, Engine compartment encapsulation, Trailing axle, single-tired, Ramp mirrors, Spare wheel, Waste heat recovery, Disc brakes front and rear axle, Seat cover / upholstery: Fabric, Seats in the cab: Passenger co-driver seat, Seats in the cab: Driver's seat backrest foldable, Voltage converter 24V / 12V 10 A, Codpfx As Agdbdsqvori Splash guard front, Front axle stabilizer bar, Additional stabilizer bar, Rear axle / trailing axle, External storage compartment on the left, Cab socket 24V, Tachograph / EC control unit, Door extension for the cab, Underride guard front, Aerodynamically shaped underbody cladding, Front axle, cranked, Water pump, regulated, Permissible total weight 25.00 t, Auxiliary heater (water), Battery 220 Ah We will also be happy to support you in the area of financing/leasing with our partners. All information without guarantee. Subject to errors and prior sale.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 20231230S0313C01, nominal power: 1.5 kW (2.04 HP), overall weight: 120 kg, rotational speed (max.): 28 rpm, total height: 1,400 mm, total length: 1,020 mm, total width: 400 mm, type of cooling: air, SML SG-2425-2CM slow-speed grinder for placement next to the injection molding machine. Designed for the direct grinding of sprues and small quantities of rejected parts, including hard and thick-walled components. Equipped with a proportional valve for the direct return of ground material to the machine. Technical specifications: - Grinding chamber: 250 x 240 mm - Capacity: 15-20 kg/h - Speed: 24 rpm - Motor power: 1.5 kW - Pipe diameter: 38 mm - Dimensions (L x W x H): 450 x 900 x 1130 mm - Weight: 230 kg Features: - Slow-speed system with toothed blades and staggered cutting blades; produces little dust and fine material - Low noise level - Proportional valve for mixing ground material with new material - Collection bin for ground material included as standard Crjdpfx Aqo Ad Hcbsvsi - Multiple safety features Available for immediate delivery from stock.

Condition: used, Milling cutters for the professional, machine-based machining of solid timber, wood-based materials and other suitable materials. Crsdj Afvbvspfx Aqvsi Marked ‘MAN’ or ‘BG-Test’ for manual feed. Technical data: - Blade: Various - Hole diameter: Various - Length: 123 mm - Material: Steel

Condition: used, empty load weight: 960 kg, maximum load weight: 3,500 kg, axle configuration: 3 axles, first registration: 11/2023, total length: 5,500 mm, total width: 2,250 mm, load capacity: 2,540 kg, • Electric winch • Anti-theft tow ball hitch • Battery-powered tilting platform Credj Af T Tmjpfx Aqvoi • Storage compartment • 2.35m ramps • 5.50 x 2.25m platform • LED lights • Wheel chocks • Straps

Condition: as good as new (ex-display), Year of construction: 2026, ST 3 classic F 23 – Combined Saw-Milling Machine With pivoting saw blade, pivoting milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table High-precision format sliding table made of anodized aluminum (travel distance 2250 mm) Large extension table (900 x 600 mm) with extendable aluminum telescope fence Max. saw blade diameter 315 mm with scoring device, pivotable from 90° to 45° Saw parallel fence with fine adjustment Stable saw unit and large, double-bearing milling unit ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made of stress-free cast iron 3 milling speeds, manually adjustable from 3,500 - 10,000 rpm With clockwise/counterclockwise rotation of the milling spindle Standard arc milling guard Two 5.0 kW motors with high power reserves Cast iron milling unit mounted on both sides at the top precision ball bearings on top close to the pivot point four optimally graduated milling speeds, which enables the sharpening of workpieces Powerful motors Industrial motor, 100% duty cycle for continuous operation (full load) suitable Scope of delivery: Arc milling guard Anodized aluminum format sliding table Aluminum fence jaws Folding stops Technical data Dimensions of cast iron work table 1112 x 430 mm Fence length 2250 mm max. saw blade diameter with/without scoring 315 mm max. cutting height at 90°/45° 100/70 mm max. crosscut width 2660 mm Saw blade pivot 90° - 45° Cutting width 900 mm Speed 4000 rpm Table saw - Spindle pivot 90° - 45° Spindle working length 100 mm max. tool diameter 210 mm max. tenon tool diameter 275 mm max. countersinking tool diameter 180 mm Speeds 3,500/7,000/10,000 rpm General - Motor power 400 V/50 Hz/S6 40% 2 x 5.0 kW (6.6 HP) Weight 470 kg Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Location: In stock, 54634 Bitburg Cedocnwydopfx Aqvori - immediately available -

Condition: excellent (used), Perlmühle Vollrath VMSM 2/8 B Ex-protected design Double chamber Grinding pot 2 x 8 l Double jacket Codpoh Svr Sofx Aqveri Power 18.5 kW In very good, ready-to-use condition, directly from production!!!

Condition: excellent (used), Year of construction: 2001, Fully functional Crodpfxo Agirws Aqvoi

Condition: good (used), Year of construction: 2004, Equipment: documentation/manual, Deckel FP1 Universal Milling Machine – Heidenhain TNC 123 Technical Data: Manufacturer: Deckel Crods Agghajpfx Aqvei Type: FP1 Machine: Universal Milling Machine Control System: Heidenhain TNC 123 Travel in X-axis: 300 mm Travel in Y-axis: 160 mm Travel in Z-axis: 340 mm Quill Travel: 80 mm Spindle Speed: 40–2,000 rpm Spindle Taper: ISO 40 Feed Rate Range (3 axes): 5–500 mm/min, continuously adjustable Rapid Traverse Rate (3 axes): 1,200 mm/min

Condition: good (used), functionality: fully functional, mileage: 1,173,922 km, power: 324 kW (440.52 HP), first registration: 04/2006, fuel type: diesel, empty load weight: 13,670 kg, maximum load weight: 18,330 kg, overall weight: 32,000 kg, tire size: 385/65R22,5, axle configuration: 8x4, wheelbase: 3,700 mm, axle spacing: 3,700 mm, next inspection (TÜV): 08/2027, fuel: diesel, fuel tank capacity: 405 l, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro3, suspension: steel-air, number of seats: 2, total length: 9,300 mm, total width: 2,550 mm, total height: 3,400 mm, loading space length: 6,500 mm, Year of construction: 2006, Equipment: ABS, additional headlights, air conditioning, airbag, central locking, compressor, cruise control, differential lock, electric window regulation, fog lights, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, spoiler, tachograph, trailer coupling, Model: VOLVO FH-440 8x4 Lift+Steer HIAB Multilift Leaf/Air Suspension First registration: 18.04.2006 Mileage: 1,173,922 km (original) Engine power: 324 kW HIAB Multilift LHS26159 FH JO-E Tilt hydraulics (PTO) Lift and Steer Auxiliary heater Antennas Radio/CD/MP3 Automatic climate control 2x Air-suspended seats with seat heating and fully adjustable 1x Bunk Electric windows Electrically adjustable exterior mirrors Multi-function steering wheel Speed limiter Sun visor Work lights Fog lights High beam Hazard warning lights Toolbox Aluminum fuel tank Emission class: EURO3 Transmission: Automatic Fuel tank: Diesel (405 liters) Retarder/Intarder/Engine brake Wheel formula: 8x4 Steering axle + Lift axle Differential lock Wheelbase axle 1 and 2: 3,700 mm Wheelbase axle 2 and 3: 1,370 mm Wheelbase axle 3 and 4: 1,380 mm Tire size axle 1 (front): 385/65R22.5 Tire size axle 2 (rear): 315/80R22.5 Tire size axle 3 (rear): 315/80R22.5 Tire size axle 4 (rear): 385/65R22.5 Leaf spring suspension / Air suspension Wheel arch Unladen weight: 13,670 kg Crsdpfx Aj Agpkxeqvei Payload: 18,330 kg Permissible total weight: 32,000 kg Vehicle overall dimensions (length x height x width): 930cm x 340cm x 255cm Body length: 650cm Our vehicles are generally listed with a valid TÜV (technical inspection) and emissions test certificate in the advertisements. Usually, these are foreign inspection certificates, which are, however, sufficient for issuing export license plates. For a valid TÜV and emissions test approval according to German standards, please contact us in individual cases. You can also reach us via WhatsApp, Telegram, Viber and Signal for further information and pictures. We kindly request that you call us directly or send a message via WhatsApp! German: We speak German and English, but feel free to send us a message in your language! English: We speak German and English, but feel free to send us a message in your language! Spanish: Hablamos alemán e inglés, pero no dude en enviarnos un mensaje en su idioma. Portuguese: Falamos alemão e inglês, mas fique à vontade para nos enviar uma mensagem no seu idioma! French: Nous parlons allemand et anglais, mais n'hésitez pas à nous envoyer un message dans votre langue ! Italian: Parliamo tedesco e inglese, ma non esitate a inviarci un messaggio nella vostra lingua! Russian: Мы говорим на немецком и английском, но вы можете написать нам сообщение на своем языке! Trade-in possible! Price is final price, VAT not shown. We can transport your vehicle directly to the port of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck in Germany or Antwerp/Belgium and Amsterdam. We can ship the vehicle worldwide for you! Export license plates on request! We support you with the export, original data confirmation for country homologation, supplier's declaration, preparation of export documents and customs license plate production, if required. An inspection and test drive is possible at any time, even on weekends, by prior telephone arrangement! Disclaimer: The buyer is obliged to independently convince himself of the condition, dimensions and equipment of the goods/vehicles. All information is without guarantee. Subject to change, prior sale and errors.

Condition: used, mileage: 319,520 km, power: 300 kW (407.89 HP), first registration: 12/2010, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: silver, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, * Sun visor * ABS * ASR * Radio * On-board computer * Cruise control * Hill start assist * Electric windows * Electrically adjustable mirrors * Mirror heating * Central locking * Rear window * Longitudinal and transverse differential locks * Air suspension axles * Air dryer * 2-line air connection * Air horns * Rotating beacon, orange * Sunroof * Driver's comfort seat * Seat heating Crsdo Ahz Tgepfx Aqvoi * Steel bumper * Trailer coupling * 12-speed * Suspension: leaf spring * Payload: 13365 * Permanent brake: engine brake ----Body: Hiab Multilift roll-off tipper XR 21S59 for 5.25-6.75 m container length, 21,000 kg lifting capacity, push arm, extendable rear under-run protection, internal controls, additional hydraulic connections at the rear.----Windows tinted, weight variant 33,000 kg Sale only to commercial businesses. IN THE CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION WITHOUT GUARANTEE, INCLUDING EQUIPMENT + ACCESSORIES. Our general terms and conditions (see imprint) form the basis of all purchase contracts, invoices, pro forma invoices, orders, and sales discussions.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Okuma Multus B300-W 6-axis turning and milling center - Okuma OSP P200L - Year 2008 - Cutting time: 10,500 h - H1 milling spindle: 6,000 rpm Csdpfeyg Rf Nox Aqvsri - Main spindle: 3,800 rpm, Rota NC 315-86 - Counter spindle: 5,000 rpm - ATC 60 system HSKA-63 (60 tools) - Geometry: very good - Marpos tool sensor

Condition: used, Year of construction: 2008, Working width: 260 mm Working height: 130 mm Number of working spindles: 5 Spindle arrangement: bottom, right, left, top, bottom Grooved bed: yes Csdpfxjyhgkdo Aqvori Motor power bottom spindle: 5.5 kW Motor power right spindle: 5.5 kW Motor power left spindle: 7.5 kW Motor power top spindle: 7.5 kW Motor power bottom spindle: 7.5 kW Bottom spindle adjustment: handwheel Right spindle adjustment: handwheel Left spindle adjustment: handwheel Top spindle adjustment: handwheel Cutterheads: Centrolock Feed speed: stepless Feed roller pressure: pneumatic Current consumption: 50 A Current consumption: 71.7 A Motor brake: automatic Extraction connection: Machine length: Machine width: Weight: 4500 kg

Condition: good (used), Year of construction: 2014, functionality: fully functional, Roll slitter type RGS50 - used Condition: good For slitting and shredding wound paper, cardboard, or plastic rolls onto a cardboard core Csdpeyn Aghjfx Aqvori - Motor power: 15 kW / double pump, 32 amps / 5-pole – 50 Hz, 3-phase - Control: PLC-supported, with two-hand safety circuit - Cutting force: 2 x 25 tons - Blade length: 2500 mm - Max. opening: 1600 mm With roll loading stand for increased work height and single-sided roll discharge - roll discharge height approx. 1200 mm Machine has been factory-tested and partially overhauled, ready for immediate use.

Condition: used, Year of construction: 1996, functionality: limited functionality, CNC-Planer-Type Milling M/C - Double Column (Milling and Turning Center) | Brand: DÖRRIES SCHARMANN | Type: 4FZT | Year of construction: 1996 A high-performance gantry milling machine designed for machining large workpieces. Its primary applications include the milling and turning of large, complex workpieces. The machine can be inspected under power by appointment. Condition: Consistent with the year of manufacture; some parts require refurbishment. - A high-quality machine, and therefore well worth modernization / a complete overhaul / highly recommended. TECHNICAL SPECIFICATIONS: Main Dimensions: - Machine width: 13.230 mm - Machine height over the floor: 8.450 mm - Machine length: 31.100 mm - Working length: 11.000 mm - Clearance width: 4.400 mm - Clearance height from the table surface to the spindle nose of the standard milling head: 3.000 mm Table: - Table width: 3.450 mm - Total table length: 13.400 mm - Length of individual table: 6.200 mm - Total clamping area: 3.450 x 11.000 mm - Clamping area of single table: 3.450 x 5.000 mm - Maximum total workpiece weight: 112 tons - Maximum workpiece weight per table: 80 tons Crossbeam: - Travel: 2.000 mm Milling and boring support: - Drive power for milling and boring (spindle): 80 kW - Max. speed of the drive shaft (spindle): 2.500 rpm EQUIPMENT / ACCESSORIES: - 2 tables - 8 machining heads - Control: SINUMERIK 880 - 2 x chip conveyors - Documentation Codpfxsyuptzs Aqveri - CE marking No guarantee for completeness and accuracy of technical data and equipment. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Year of construction: 1990, condition: used, Manufacturer : Fryma Model: MSM-18 Year: 1990   Type : Ball mill type Co-Ball Application: fine grinding of suspensions and highly viscous products. Grinding chamber volume: 1.1 litres Internal overpressure: 2.5 bars Crjdpsx R Dd Iofx Aqvji Jacketed: 2 bars Motor power: 5.5 kW   Capacity: 20 – 80 l/h depending on product.   Examples: food: chocolate coatings / fillings cosmetics: lipsticks, pigment pastes pharmaceutiques : additifs chimiques : laquage pour les pigments, les peintures et les céramiques.  

Condition: good (used), Year of construction: 1960, Make: Bäuerle, including integral fence and HolzHer power feed Model: SFM 2 Tilting range: 0 to 45° Brake Motor with 2 speeds/pole-changeable 6 speed settings: 1,800 - 4,500 - 5,600 - 6,000 - 9,000 - 12,000 rpm Forward/reverse rotation Table size: 1150 x 1200 mm Spindle diameter: 30 mm Milling fence Required space approx. 1200 x 1200 x 1300 mm Cedjy E T Ufjpfx Aqveri Weight approx. 1000 kg Location: 54634 Bitburg, loaded free on truck, unpacked Delivery in current condition as inspected, function-tested without overhaul, without warranty or guarantee

Condition: excellent (used), Year of construction: 2001, Kity 629 rotary tiller Motor 2,2 KW/400 Volt Table size approx. 580x715 mm Finely adjustable milling fence Crsdpfjr Id S Eox Aqvei spindle swivel + 30° to - 5° Right/left rotation of the milling spindle Speeds 4800/6400/8700 rpm Spindle stroke 130 mm Tool up to Ø 180 mm Suction connection 2 x 100 mm Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Panhans swivel milling machine type: 245/20 Solid German engineering Table milling machine with one-sided swiveling fixed milling spindle for the swivel range from -5° to +45.5° Positioning control for height and swivel adjustment with height zeroing and offset measurement travel Electronic position and speed displays 4 speeds 3000 / 4500 / 6000 / 9000 rpm Quick belt tensioning device Push button for spindle start and stop Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Lower control panel on rigid frame support Milling fence 216 total adjustment via handwheel and LCD display incl. cast fence plates and aluminum splitter tongues Machine socket Lockable main switch Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE-compliant GS tested Table size 1100 x 760 mm Table height 870 mm Milling spindle not exchangeable Credpfxjr Ig H Ts Aqvei 30 mm Clamping height 140 mm Height adjustment 125 mm Suction nozzle 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 800 kg Equipment: Top control panel Swivel +-45 degrees Motor 7.5 Kw Centerx Extendable frame support Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), fuel type: diesel, color: yellow, first registration: 01/2018, Drive: Track Unladen weight: 30,000 kg Technical condition: very good Visual condition: very good Price: On request CATERPILLAR PM 622 ASPHALT MILLING MACHINE 4 x track drive Working width: 2235 mm Working depth: 0-330 mm 193 milling picks Hydraulically foldable discharge conveyor CAT Grade Control automatic levelling 2 x operator consoles with LC display Hydraulically liftable side plates Rear-view camera Weather protection roof, foldable Driver's seats Work lights Cleaning system Cedpeuxu Eqefx Aqvjri CAT Diesel engine, C18 622 HP Original paint FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: used, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, quill stroke: 80 mm, Milling Machine - Vertical Codpfjzq Hlfjx Aqvori Manufacturer: DECKEL Model: FP 2 A Control: Dialog 11 Technical Data: - X-travel: 300 mm - Y-travel: 300 mm - Z-travel: 400 mm - Speed range: 40 – 4,000 rpm - Tool holder: SK 40 - Swivel range: +/- 90° - Quill stroke: 80 mm Equipment & Accessories: - Enclosure In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools shown, and clamping devices are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2006, functionality: fully functional, Modular and scalable design Probable working width 600 mm Electrical supply 400 V Rated current 16 A Frequency 50 Hz – to be confirmed Output up to 7,500 pieces/hour Programmable control with touchscreen 50 memorizable programs Rex head according to configuration Weight range 35 to 85 g with Basic Rex Weight range 50 to 110 g with Basic Rex Pre-lamination before fermentation Resting pre-fermenter Optional pre-fermenter air conditioning Interchangeable stamping station Optional longitudinal cutting station RR forming station according to configuration WK-RR forming station according to configuration Seeding unit according to configuration Automatic depositing onto trays or belts Drive power 3.5 to 5.3 kW Fermenter air conditioning 4.4 kW Fermenter water 15 l/h maximum at 2 bar Credpfx Aqszp H Epovji Seeding water 40 l/h at 2 bar Maximum height approximately 2,640 mm Used industrial line for rolls – König Combi Line The used König Combi Line is a modular line designed to automate the dividing, rounding, resting, shaping, and depositing of rolls. Its scalable design allows different modules to be combined according to the desired products, required output, and organization of the bakery. The nameplate identifies this equipment as a Combi Line manufactured by König Maschinen Kft. The visible machine number is 06.6.0070. The beginning of the configuration code appears to correspond to a 600 mm width version, but the complete composition of the line must be confirmed by an inventory of the modules present. Why this line stands out The Combi Line is based on a modular architecture, allowing the production of numerous formats from a single installation. Depending on its configuration, it can integrate a Rex dividing-rounding head, pre-lamination, a pre-fermenter, a stamping station, a forming station, a seeding unit, and an automatic depositing unit. This modularity facilitates the adaptation of the line to changes in production. Additional equipment can be added later without replacing the entire installation. Key advantages Modular and scalable design Automated production of many types of rolls Output of up to 9,000 pieces per hour Gentle dough handling with Rex heads Memorizable settings for different productions Quick tool changes for stamping Automatic depositing onto trays, belts, or boards Wide choice of shaping and finishing modules Seed recovery, limiting waste Easy access for cleaning and maintenance Products achievable depending on the configuration The Combi Line range allows the production of round, oval, flattened, laminated, stamped, cut, rolled, or seeded dough pieces. It is particularly suitable for hamburger buns, hot dog buns, milk bread rolls, Kaiser rolls, Kornspitz, decorated rolls, donuts, bocadillos, and long products such as half-baguettes. It can process wheat doughs, mixed doughs, cereal doughs, and various leavened doughs, provided they are compatible with the dividing head and installed tools.

Condition: used, Year of construction: 2010, turning length: 1,495 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, workpiece weight (max.): 300 kg, total height: 2,577 mm, total length: 5,088 mm, total width: 2,450 mm, spindle nose: A2-6, spindle diameter: 660 mm, Equipment: documentation/manual, CNC Control Mazatrol Matrix Turning diameter 660 / 260 mm Turning length 1495 mm Spindle bore diameter 65 mm Codpfx Aszqt Umoqvjri Spindle nose A2-6 Spindle nose sub spindle A2-6 Turning speed spindle 35 - 5.000 R/min Turning speed sub spindle 35 - 5.500 R/min Milling head speed 15 - 12.000 R/min Movement X-axis 580 mm Movement Y-axis 160 mm Movement Z-axis 1.545 mm B-axis travel 225° C-axis indexing 0,0001 (360) ° Tool taper Capto C6 Tools in tool magazine 120 Barfeeder Irco-Breuning ILS-MUK If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, mileage: 470,843 km, power: 427 kW (580.56 HP), first registration: 11/2020, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, wheelbase: 5,000 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 8,850 mm, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, lane keeping assist, parking heater, retarder, seat heater, spoiler, traction control, trailer coupling, = Additional Options and Accessories = - Adaptive cruise control - Roof spoiler - Remote central locking - Refrigerator - Leather interior - Lift axle - Air suspension - Tow hitch - Microwave - Engine brake - Power Take-Off (PTO) - Radio - Rearview camera - Disc brakes - Sun visor - Spotlights - Lane keeping assist Crodpfx Aszyp Rpeqvsi - Auxiliary heater - Tool box = Notes = Scania R580 6x2 boogie. Full air suspension. Retarder. Engine PTO. Hiab ULT20ZL59 590 cm. 20,000 kg. Distance from hook to end of bumper: 620 cm. Distance from hook to end of extended bumper: 700 cm. = Further Information = Technical Information Number of cylinders: 8 Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/55R22.5; Steerable; Tire tread depth left: 60%; Tire tread depth right: 60% Mid axle: Tire size: 315/70R22.5; Twin tires; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40% Rear axle: Tire size: 315/70R22.5; Twin tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Weights Unladen weight: 13,255 kg Payload: 13,745 kg GVW: 27,000 kg Interior Upholstery: Leather Maintenance APK (Technical Inspection): Valid until 04.2027 Identification Model number: R580 V8 6x2 / HOOKLIFT / HAAKARM = Company Information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB, Wouter Greutink NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, Year of construction: 1980, Spindle swivels: No Height adjustment: Handwheel Crodpfx Aezdzb Isqvei Milling vice adjustment: Manual Height indicator: Scale Milling stop indicator: Scale Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 9000, speed indicator defective Motor power: 5 / 6 kW Motor brake: Yes Dust extraction port: 120 mm Machine length: 2500 mm Machine depth: 900 mm Weight: 800 kg