Used Roll-Up Door for sale (33,937)

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min Fpedpfx Aaey Aubue Esk power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, • Year 2004 • In our possession since 06/2023 • Complete gripper setup, with two modified grippers for Ø14 and Ø16 • Automated pallets for Ø3-4-6-10-12 • Various grinding wheels for roughing and finishing, some new, for both metal and HSS • Parkair electrostatic dust extractor Fedpfx Aozcvakja Espk • New user interface keyboard (3-4 years old) • New workpiece rotation belt (to be replaced in 2025) • Less than 100 operating hours since 2023 • Dedicated Transor filtration tank, year 2007, maintained with filter replacement and complete functionality check, with service performed in 07/2023 (over €3000 + VAT), less than 100 operating hours since maintenance -separate sale can be considered- • Price for machine + filtration system: €40,000

Year of construction: 1981, condition: used, machine/vehicle number: 152, We offer the Datamail Roll Collator BIELOMATIK JUMBO DATAMAIL COLLATOR P668 for sale. Fsdpfxoum T Nco Aa Eopk Configuration: Year: 1981 Jumbo paper unwinds, Ø 127 cm (50") Carbon unwinds, Ø 70 cm Cross glue unit NOT AVAILABLE! Programmable length gluing unit NOT AVAILABLE! Die-cutting cylinders in various sizes and cams for numbering machines. Snap out delivery with batcher and forward numbering capability (Bielomatik VWZ) – not visible in the photos. Includes some spare parts. Machine is operational. Video available upon request. Price including disassembly: 9,000 EUR.

Condition: new, Year of construction: 2026, load capacity: 5,000 kg, lifting height: 3,500 mm, load center: 500 mm, fuel type: electric, mast type: duplex, construction height: 2,480 mm, battery capacity: 230 Ah, battery voltage: 153 V, fork length: 1,500 mm, empty load weight: 6,350 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION. Our forklifts are technically refurbished in accordance with FEM-4.004 and the latest safety standards, ensuring maximum quality and your safety. From the chassis to the battery, including drive components, brakes, steering, and electrics – each vehicle undergoes thorough inspection and reconditioning. ? Made in Germany – with responsibility and precision ? Strict technical inspections ? 400+ vehicles available ? Worldwide shipping & customs handling ? Service & spare parts at fair prices Fedpfxoy Rq Nqj Aa Eepk ? Personalized support – even after purchase Test on site now and get expert advice – we’ll find the right solution for you. Industrial Truck Specifications: Manufacturer: Heli Type: Counterbalance Forklift CPD50-G2-4 Drive type: Electric Load capacity: 5,000 kg Year of manufacture: 2026 Operating hours: 0 Lift height: 3,500 mm Mast type: Duplex Free lift: No Initial lift: No Overall height: 2,480 mm Fork length: 1,500 mm Unladen weight: 6,350 kg Load center: 500 mm Tyres: Solid rubber Model type: CPD50-G2-4 Battery type: Lithium-ion Voltage: 153V Capacity: 230 Ah Charger: Integrated charger Cab type: Full cab – front, roof & rear windows + sprung steel doors Lighting: 2x front work lights Lighting: 2x rear work lights Lighting: Road-legal package (for potential use in public/limited road traffic): beacon, tail light, reverse light, reflectors, etc. Attachment: Sideshift Attachment: Fork positioner

Condition: used, Year of construction: 2010, operating hours: 36,283 h, functionality: limited functionality, total width: 1,800 mm, total length: 3,000 mm, total height: 3,000 mm, maximum load weight: 4,000 kg, heating capacity: 18 kW (24.47 HP), Currently in stock, available immediately Fodpfovmqrfjx Aa Eopk Can be completely or partially overhauled upon customer request.

Year of construction: 2012, condition: ready for operation (used), A Roll-o-Matic bag production line for bottom-sealed film bags is available. Bag length range: 360mm-1800mm, max. bag width: 860mm, max. production speed: 90m/min, max. cycle rate: 230/min, material: PE LD/PP, max. film thickness: 70µm. Machine dimensions: approx. 4100mm/1600mm/1700mm, weight: approx. 1600kg, control system: Siemens PLC. Documentation available. On-site inspection possible. Fpsdpfx Aaoxrf I Us Eok

Condition: not inspected (used), For sale due to lack of use: 2 Rollomatic grinding machines! CNC 24F3, CNC 24 FJ Fodeyxwylepfx Aa Eepk

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 605, rotational speed (max.): 3,000 rpm, grinding diameter: 12 mm, controller model: Robot CNC, workpiece height (max.): 100 mm, table diameter: 200 mm, TECHNICAL DETAILS Grinding capacity (diameter): Ø 0.025 – 12.7 mm Bar diameter: Ø 1.0 – 12.7 mm Grinding length: W15 (optionally W20) Number of wheels: 1 Table diameter: 200 mm Workpiece height: 100 mm Control system: Robot CNC Axes: 4 axes + 2 programmable robot axes Z-axis: 35 mm, resolution: 0.5 µm X-axis: 25 mm, resolution: 0.1 µm Y-axis: 286 mm, resolution: 0.5 µm U-axis: 15 mm, resolution: 0.1 µm Interpolation: Simultaneous linear interpolation of 4 axes, cylindrical interpolation of 2 robot axes Head Motor Power: 0.70 kW Speed: 300 – 3,000 rpm Rough Grinding Power: 1.5 kW Spindle diameter: Ø 60 mm Grinding wheel diameter: Ø 200 mm Cutting speed: 30 m/s Finishing Power: 0.75 kW Spindle diameter: Ø 100 mm Grinding wheel diameter: Ø 150 mm Cutting speed: adjustable MACHINE DETAILS Fpedpfx Aoxnzd Dja Esk Total power requirement: 6 kW Machine weight: approx. 1.8 t Space requirements (L x W x H): approx. 1.83 x 2.04 x 2.1 m EQUIPMENT - Robot for loading and unloading - Fire protection system

Year of construction: 2015, condition: new, Press the door lignum-EVERT JOHANSON TPBH 2300X1300 Press bonding framework of internal and external doors " Companies Lignum-Evert Johanson --- pneumatic-hydraulic press Fpodpfx Aecczuqoa Esk bonding size maximum dimensions: Length 2330 mm Width 1330 mm adjustable working pressure and the size of the door bonded hardware give one year warranty

Condition: used, functionality: unexamined, Year of construction: 2008, load capacity: 680 kg, lifting height: 9,930 mm, overall weight: 3,150 kg, Equipment: all wheel drive, All-terrain scissor lift platform with automatic self-leveling 3 units available. UPRIGHT Model: SL26SL Year of manufacture: 2008 Load capacity: 680 kg Platform dimensions: approx. 3.66 x 1.72 m Platform extension: approx. 80 cm Transport dimensions: approx. 3.79 x 2.13 x 2.6 m (Height with guardrails folded down: approx. 1.9 m) Weight: approx. 3,150 kg Working height: approx. 9.93 m Platform height: approx. 7.93 m Self-leveling inclination compensation The machine is operational but has not yet been further serviced or refurbished, either technically or visually. Therefore, it is offered here at a special preliminary price in its current condition. Shipping is not a problem. The machine’s location is 94244 Teisnach. (See photos for current condition) Viewing prior to purchase is expressly recommended; simply leave a telephone number by email and I will get back to you to arrange a viewing appointment. Subject to prior sale. All information provided without guarantee. Fedjxycykopfx Aa Eopk Machines can be collected by the buyer or shipped by freight carrier at the buyer’s expense. Loading or packaging can be organized by us. The shipping costs are indicative; depending on distance and unloading facilities, actual costs may vary. Please inquire for details. The stated sale price is a net final price. An invoice with separately listed VAT will be provided. Warranty terms: Due to age and wear, the sale is exclusively to commercial buyers, without any warranty, guarantee, or return claims. All information is given without liability. By placing a bid, the buyer accepts these terms.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Hydraulically operated precision plunge grinding machines by Rollomatic. Grinding process: cylindrical plunge grinding, workpiece diameter range: 0.2mm–6.35mm, shank diameter range: 1mm–6.35mm, total workpiece length range: 30mm–60mm, grinding wheel diameter: 200mm, grinding spindle speed: 6,000 rpm, workpiece speed: 800 rpm. Machine dimensions (X/Y/Z): approx. 1100mm/800mm/1300mm, weight: approx. 600kg. Includes spare parts. Documentation available. Fjdpfjw Dfd Nex Aa Ejpk

Condition: excellent (used), Lasermax LX550 Roll Feed System with LX581 Module Fpedpfx Aezaq Rfea Ejk Roll-fed digital print finishing system Designed for continuous-feed digital printing applications Automatic web feeding and tension control Integrated touchscreen control High-volume production capability Suitable for transactional, direct mail and book production workflows Modular system design Made in Sweden Technical Data LX550 Power supply: 230 V, 1-phase, 50 Hz Power consumption: 1800 W Rated current: 10 A LX581 Power supply: 200–240 V, 1-phase, 50/60 Hz Power consumption: 1200 W Rated current: 10 A Circuit breaker: 15 A Machine Information LX550 Serial No: 09LX550034 LX581 Serial No: 09LX581002

Condition: ready for operation (used), Year of construction: 1996, I am selling the machine shown in the photos from the Dutch company GREEFA. Many other devices are available in our offer—feel free to inquire. Fedpfx Aajw Dhwfs Eepk

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. Fpjdpfx Asxghngsa Esk As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, *Description:* For sale: motorized 3-roller rolling machine *SAY-MAK SRM 1550 x 90* *Technical specifications:* - *Year*: 2019 - Serial number: 59860 - *Capacity*: 2mm steel / 1.5mm stainless steel, with a width of 1550mm - *Minimum diameter*: 90mm Fjdpfxjzr Rduo Aa Eepk - *Motorized*: Yes, with forward/reverse foot pedal - *Controls*: Control box with emergency stop + digital display - *Weight*: 580kg - *Voltage*: 380V, three-phase - *Condition*: Very good condition, well-maintained 2019 machine Perfect machine for sheet metal work, ventilation, and metal fabrication. Reputable Turkish brand, spare parts available.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, *Description:* For sale: motorized 3-roll bending machine, brand *SAY-MAK*, model *SIR 1270 x 68*. Fsdpfx Aaezr Rdho Espk *Specifications:* - *Year*: 2019 - Serial No.: 6375291 - *Usable width*: 1270 mm - *Steel capacity*: 1.2 mm / Stainless steel 0.8 mm - *Minimum diameter*: 68 mm - *Motorized*: Yes, with foot pedal for forward/reverse operation - *Electrical cabinet*: 380V Three-phase - 0.75 kW - Emergency stop - *Weight*: 350 kg - *Condition*: Very good condition, 2019 machine Ideal for sheet metal work, ventilation, zinc work, and stainless steel applications. Compact and precise machine. Robust Turkish brand, spare parts available.

Condition: used, Year of construction: 2019, total length: 2,700 mm, total width: 1,450 mm, total height: 1,500 mm, Colour: Blue Empty weight: 1.450 kg Price: On request - Year: 2019 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 19142 - Drive system: CNC - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 - Power [kW]: 4.0 - Max. sheet thickness [mm]: 6 - Max. prebending thickness [mm]: 4 - Max. working width [mm]: 1250 - Top roll diameter [mm]: 120 - Bottom roll diameter [mm]: 140 - Options: Digital readout, Cone rolling - Transport dimensions: 2700mm x 1450mm x 1500mm (l x w x h) - Transport weight [kg]: 1450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Fodpfx Aoztcpfea Ejpk Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, mileage: 253,480 km, power: 265 kW (360.30 HP), first registration: 02/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), AROCS – GERMAN VEHICLE REGISTRATION, 6X4, AIR-SUSPENSION REAR AXLES, SUN VISOR, ALL-ROUND LIGHTS, WHEELBASE 3.60 M, ELECTRIC WINDOWS/MIRRORS, HEATED SEATS/MIRRORS, REARVIEW CAMERA, AUTOMATIC TRANSMISSION, ENHANCED ENGINE BRAKE, DIFFERENTIAL LOCKS, ABS, ASR, WORK LIGHTS, STORAGE COMPARTMENTS, ADJUSTABLE REAR UNDERRIDE GUARD, HYDRAULICS TO THE REAR, AIR CONDITIONING, HIAB MULTILIFT XR21S46 HOOKLIFT, SLIDING HOOKS, HYDRAULIC CONTAINER LOCKING SYSTEM, GOOD TIRES, 21 TON CAPACITY. Fedpjym N H Sjfx Aa Ejpk

Condition: used, mileage: 186,489 km, power: 316 kW (429.64 HP), first registration: 12/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, German vehicle registration document, sun visor, rotating beacons, trailer hitch, differential lock, I-Shift automatic transmission, VEB brake, various rear-view cameras, several storage compartments, air suspension at the rear, liftable and steerable third axle, air conditioning, lane keeping assist, distance assist, wheelbase 5.20 m, CB radio, central lubrication system, EBS, ABS. Crane behind the cab (foldable) Palfinger PK14502 SH-B Power Link Plus with sub-control, remote control, emergency stop, start/stop, 1,373 operating hours, 5th/6th control circuit with rotary servo, 3x hydraulic system at 10.30 m/1,180 kg, working height approx. 14 m. Hooklift Palfinger T20 with sliding hook, hydraulic under-ride guard, hooklift operable via remote control, good tires, in top condition! Fsdpfx Aoxx Nabea Ejpk

Condition: used, Year of construction: 2003, total length: 3,230 mm, total width: 1,150 mm, total height: 1,120 mm, Colour: Grey Empty weight: 1.400 kg Price: On request - Year: 2003 - Documentation available: Yes Fpjdpszry N Hsfx Aa Ejk - CE marking present: Yes - CE certificate present: Yes - Serial number: 220281 - Drive system: Conventional - Drive: Mechanical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 2.2 - Max. sheet thickness [mm]: 2 - Max. prebending thickness [mm]: 2 - Max. working width [mm]: 2050 - Top roll diameter [mm]: 110 - Bottom roll diameter [mm]: 110 - Bending speed [mm/min]: 3 - Transport dimensions: 3230mm x 1150mm x 1120mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP S54 Four roll bending machine Electronically controlled, electric drive, four-rolls bending machine Fpedpsiivgrofx Aa Eek Technical specifications: Number of Rolls: Four Geometry of the side rolls: planetary guide Working length: 3000 mm Top roll diameter: 300 mm lower roll diameter: 280 mm Side rolls diameter: 200 mm Guaranteed installed power: 10.8 kW Guaranteed maximum rolling speed: 5 m/min Guaranteed machine weight: 10,000 kg Length: 5,500mm Width: 1,400mm Height: 1,600mm Guaranteed services: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 18 mm Bending performance (full working width) 12 mm from pipe diameter 1500 mm Rolling capacity (full working width) 12 mm Bending capacity (full working width) 10 mm from pipe diameter 450 mm Standard equipment: Electrical drive of the top roll Planetary movement of the side rolls Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rollers for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, Technical characteristics: Section modulus 100 cm³ Main shaft diameter 130 mm Side shaft diameter 130 mm Outside diameter of the bending rolls 410 mm Adjustable rolling speed 0-6 m/min Installed power 18.4 kW (25 hp) Length 1,900mm Width 2,200mm Height 1,900mm Weight 5,720 kg Standard equipment: Hydraulic adjustment of the side rolls 3 rolls driven (3 hydraulic motors + 3 planetary reduction gears) Fodsd Eqg Nspfx Aa Ejpk Independent lateral profile guide rolls, adjustable in 6 directions, fully hydraulic Automatic scope rotation speed compensation Complete universal rolls set for standard profiles and beams (12 pieces) Tool kit for machine equipment Low-voltage control on mobile operator panel Safety device according to regulations Technical documentation and CE certificates Digital displays for the roller position of the side rollers Optional, installed: Siemens NC control PGS-CLASSIC

Condition: new, functionality: fully functional, Year of construction: 2026, max rolling capacity (cold): mm. 32 max prebending capacity (cold): mm. 24 at diameter mm. 2050 with material yield strength N/mm2 260 working length: mm. 3050 number of rolls: four top roll diameter mm. 410 pinching roll diameter mm. 390 driven rolls : two rotation speed 5 m./min. rolls rotation: hydraulic installed power: 30 PS Voltage 400V, 50Hz, 3Ph Inkl.: - hardened & polished rolls - cone bending device Fjdpfx Aasf T Rzfo Espk - electronic rolls parallelism - Siemens PLC Control - CE certificate - control console on wheels

Condition: new, functionality: fully functional, Year of construction: 2026, BIKO B4 2014 Linear Four roll bending machine Hydraulically controlled four-rolls bending machine Make BIKO, model B4 2014 Technical specifications: Number of Rolls: Four Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 145 mm Lower roller diameter: 130 mm Side roller diameter: 130 mm Guaranteed installed power: 5.5 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 2,300 kg Length: 2,900mm Width: 900mm Height: 1,000mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 4 mm Bending performance (full working width) 3 mm from pipe diameter 725 mm Rolling capacity (full working width) 3 mm Bending performance (full working width) 2 mm from pipe diameter 190 mm Standard equipment: Linear guide system for rolls movement Extremely wide bearing blocks Needle bearing for the rolls rotation Extra heavy double hinged folding release Hardened rolls for high wear protection Hydraulic parallelism system of the side rolls Digital display for the position of the side rolls and the bottom roll Fsdpfeiinknjx Aa Espk cone bending device Control on the swiveling control panel Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, HAV 3293 Plate width: 3200mm Fodpfxjiivg So Aa Espk Top Roll diameter: 930mm Side rolls diameter: mm 800 Machine weight: 150 Ton Rolling capacities (Y:260Mpa/Ø 4650mm): 3200mmx155mm Prebending capacities (Y:260Mpa/Ø 4650mm): 3200mmx115mm