Used Rivet Header for sale (201)

Condition: good (used), Dividing head, dividing head, rotary table, rotating table -with translation: 1:40 -Indoor recording: MK4 -Peak height: mm -Passage: Ø 32 mm Tedpsdc R N Tefx Aa Isc -Dividing head: swiveling -Dimensions: 430/430/H280 mm -Weight: 83 kg

Condition: used, maximum load weight: 35,560 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 07/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment list available upon request. Chassis: Ladder frame made of lightweight steel, with continuous crossmembers. Coupling plate, 8 mm thick, with a 2-point kingpin according to DIN 74080 / ISO 337. Suspension: Axle lift mechanism on axle 1, 18330.700, manufacturer optional (Kögel). Three-axle unit, with disc brakes, approximately 430 mm in diameter, approximately 120 mm offset. Air suspension with approximately 180 mm of travel. Vehicle tires: 6x 385/65 R 22.5, 160J (European brand, manufacturer optional - Kögel). Chassis components: Kingpin supports (manufacturer optional - Kögel), mechanical with leveling foot, approximately 24 tons lifting capacity. One-sided operation on the right-hand side when driving. Splash protection system (spray mist suppression) according to Regulation (EU) No. 109/2011, consisting of 1 pair of quarter-fender mudguards in front of the axles, and 1 pair of quarter-fender mudguards with mud flaps behind the axles. 2 wheel chocks with holder. Pallet box for 24 Euro pallets, completely enclosed, protected against spray water, and also serves as a side protection device. Ground clearance (front) 220 mm. Plastic toolbox, waterproof, dimensions (internal) approximately 545 x 400 x 400 mm. Installed on the left-hand side at the rear. Retractable access ladder at the rear on the right-hand side. High, rigid rear underrun protection made of steel according to ECE-R58. Height of the underrun protection profile min. 120 mm, designed for increased test loads. 1 pair of retractable warning panels for over-width loads, retro-reflective red/white, with LED lighting, spiral cable and plug connection. Arrangement in the front and rear vehicle area. Braking/air suspension system: EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638, (without connecting cables), parking brake as spring-loaded brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 plug connection. EBS system (manufacturer optional - Kögel). Air suspension system including 1 lifting and lowering valve, mounted on the left-hand side behind the axle unit when driving. Driving height is adjusted automatically. 2 fail-safe coupling heads at the front, ISO 1728. Air tank for brake system and air supply made of steel (EN 286-2). Floor: Plate floor, approximately 30 mm thick. Floor sealed at the rear. Tedpfx Aozqii Hja Iec Superstructure: WITHOUT quick-release device for front side tarpaulin, with tensioning rods. Quick-release device at the rear for side tarpaulin with tensioning rods and ratchet. Meets superstructure strength according to EN 12642 XL (VDI 2700). Tested for a payload of approximately 27,000 kg. Front wall: Front wall in superstructure height with aluminum corner posts, riveted with aluminum hollow profiles, screwed/riveted to the frame, 1 pair of lashing eyes according to EN 12640. Inside of front wall reinforced with 12 mm plywood with screen-printed surface, approximately 1,250 mm high. Rear wall: Double-wing rear portal door made of aluminum, approximately 2,630 mm i.o.L. 4 integrated twist lock closures (2 pieces on the left, 2 pieces on the right), manufacturer optional - Kögel. Bolted corner posts at the rear made of aluminum at portal height. Corner posts on both sides, approximately 500

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: M08E/9065, Offer Number: M08E/9065 Machinetype: 5 die - 5 blow transfer header Info: bushing cut-off Make: SAKAMURA Type: BPF540 Constr. year: 1990/09 diameter range: 23 mm number of dies: 5 number of stations (incl. cut off): 6 cutting length: 175 mm shaft length under head: 130 mm output - pieces/min: 86 - 130 Todpjx Igg Tofx Aa Ioc press power: 220 to Location: Europe

Condition: good (used), Year of construction: 2014, Tecna 3484 Universal Spot Welding Station 8 kVA Universal welding station 8 kVA, manually operated gun, double program. Simultaneous connection of two tools with automatic recall of the corresponding welding program, saving time and avoiding errors in terms of simple and safe work flow. Body repairs: resistance spot welding of sheet metal, smoothing with dent spotter (nails and washers), local heating (carbon electrode), screw and rivet welding, dent removal of stainless steel sheet. Synchronous SCR welding control, setting of welding time in cycles and pulses, setting of welding current and compensation function. Mains supply: 400V Mains frequency: 50 / 60 Hz Tjdpfxol Smn Ss Aa Ijc Fuse: 25 A Rated power at 50 %ED: 8 kVA Max. Welding power: 35 kVA Max. Secondary current: 6,4 kA Heat current 100 %: 0,88 kA Year: 2014 Weight: 85 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: used, machine/vehicle number: 003, Number of heating chambers: 5 Chamber size: 140 Ø x 150 mm high Maximum tested temperature: 1000°C Tjdpfx Aasbn I Tzs Isc Electrical connection: 400 V, 13 kW Space requirement: 550 x 1600 x 1830 mm Weight: 492 kg

Condition: excellent (used), MDS Type: MDS A220-PD MDS A220-PD Manual Assembly Station The A220-PD assembly system is a stationary manual assembly station for processing press-fit components. Intended use: The machine is used for press-fitting connecting elements. The operator manually places the corresponding screws, plastic nuts, and the component to be processed into the machine. The operator then starts the press-fitting process using a foot switch. The press-fitting process runs automatically. Todpozgr I Rofx Aa Ioc Connecting elements: Press-fit nut, rivet nut, self-piercing nut, press-fit pin, punching pin/rivet pin Thread size: M5, M6, M8, M10, M12 Technical data: Control voltage: 230V/10A Connection plug: HAN 10, not wired Temperature ranges: Transport: -20°C to +60°C Operation: +10°C to +40°C Storage: -20°C to +50°C Compressed air connection: Operating pressure: 6 bar Quality: Treated, water-free, and oil-free air Connection: 1/2" connection thread Machine dimensions: Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (B): approx. 600 mm Values apply to a working height (AH) of 1000 mm. Pneumatics: Standard: Manufacturer SMC Variant: Manufacturer FESTO Control: Standard: Manufacturer B & R Variant: Manufacturer Siemens Machine type: C-frame A220-PD Continuous sound pressure level (LpA): 78 dB Operating modes: The operating modes can be changed in the control panel. Automatic mode: The press-fitting of the connecting elements takes place in automatic mode. Movements are only initiated when the operator presses the foot pedal and thus triggers the press-fitting process. Manual mode: In manual mode, adjustments are made to the machine. In this operating mode, movements can be activated individually. Weight: Approx. 600 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 1972, functionality: fully functional, machine/vehicle number: M06L/7477, Offer Number: M06L/7477 Machinetype: double blow header Make: HEUER Type: DM5LS Constr. year: 1972 diameter range: 2-5,2 mm shaft length under head: 120 mm Tsdpfx Aowi S Urea Ijc cutting length: 146 mm output pieces/min: 105 Location: In our warehouse

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: M06L/9043, Offer Number: M06L/9043 Machinetype: double blow header Make: SACMA Type: SP31 Constr. year: 1977 diameter range: 6-12 mm shaft length under head: 120 mm max. cut-off length: 160 mm output pieces/min: 125 Location: In our warehouse Todpfjxcxz Ajx Aa Ijc

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: M08L/8065, Offer Number: M08L/8065 Machinetype: 4 die - 4 blow transfer header Info: bushing cut-off , PKO Make: MALMEDIE Type: K64 Constr. year: 1981 diameter range: 16-30 mm number of dies: 4 number of stations (incl. cut off): 5 cutting length: 235 mm shaft length under head: 180 mm output - pieces/min: 90 press power: 380 to Location: In our warehouse Tjdpfx Aowi S I Eoa Iec

Condition: used, Year of construction: 1993, functionality: fully functional, machine/vehicle number: M08L/8623, Offer Number: M08L/8623 Machinetype: 4 die - 3 blow transfer header Info: PKO Make: ESSEBI Todjwi Swmjpfx Aa Isc Type: RCF 36-R Constr. year: 1993 diameter range: 3,8 - 6,5 number of dies: 4 number of stations: 4 cutting length: 52 mm shaft length under head: 6-35 mm output - pieces/min: 250 press power: 55 to Location: In our warehouse

Condition: excellent (used), Here, we offer you a control unit. Control unit for the RIVSET riveting system. Operating voltage: 400V 50 Hz Rated current: 13A Tjdozgaahspfx Aa Ioc Main fuse: 20 A Control voltage: 24 V Signal voltage: 10 V Year of manufacture: 2011 with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 Type: 6039402 The system was inspected by the manufacturer and is functional. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: M06L/7480, Offer Number: M06L/7480 Machinetype: double blow header Make: HEUER Type: DSL6 Constr. year: 1978 diameter range: 3-6 mm shaft length under head: 35-120 mm Tedpfxewi S R Ho Aa Isc max. cutting length: 146 mm output- piece/min: 90 Location: In our warehouse

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: M08L/8464, Offer Number: M08L/8464 Machinetype: 2 die - 3 blow transfer header Info: PKO Make: OMEGA Todpswi Sz Eofx Aa Iec Type: 123G Constr. year: 1995 diameter range: 3-8,5mm number of dies: 2 number of stations (incl. cut off): 4 cutting length: 60 mm shaft length under head: 55 mm output - pieces/min: 250 Location: In our warehouse

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: M08I/8625, Offer Number: M08I/8625 Machinetype: 4 die - 4 blow transfer header Todpfx Aeygv Aysa Ioc Info: bushing cut-off , PKO Make: KIESERLING Type: K54 Constr. year: 1981/2011 diameter range: 8-22 mm number of dies: 4 number of stations (incl. cut off): 5 cutting length: 175 mm shaft length under head: 155 mm output - pieces/min: 105 press power: 250 to Location: Germany

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M06L/7481, Offer Number: M06L/7481 Machinetype: double blow header Make: HEUER Type: DSL4 Constr. year: 1985 diameter range: 2-4 mm Tjdpewi S T Uefx Aa Iec shaft length under head: 100 mm max. cutting length: 117 mm output- piece/min: 110 Location: In our warehouse

Condition: used, maximum load weight: 35,560 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2026, next inspection (TÜV): 01/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list: Complete equipment available upon request. Chassis * Regular ladder frame in lightweight steel construction * with continuous cross members, coupling plate 8 mm thick * with a 2-point kingpin according to DIN 74080 / ISO 337 Suspension * Axle lift mechanism on axle 1, brand according to choice, Kögel * Three-axle unit * with disc brakes Ø 430 mm * Offset approx. 120 mm, air suspension with approx. 180 mm travel Vehicle tires * 6x 385/65 R 22.5 UNIROYAL TH 50 Chassis components * Landing gear (brand according to choice from Kögel), mechanically operated with leveling foot, lifting capacity approx. 24 t * One-sided operation on the right side when driving, splash protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 * for three-axle unit with 385/65 R22.5 tires * consisting of 1 pair of quarter-circle fenders in front of the axles * 1 pair of straight fenders with mud flaps between the 1st and 2nd axles * 1 pair of quarter-circle fenders with mud flaps behind the axles * Storage box for: 10 side panels, folding stanchions, and rear door or rear flap. * Fully enclosed, protected against spray, also serves as a side protection, ground clearance (front) 220 mm * 2 plastic toolboxes, watertight, dimensions (internal) approx. 545 x 400 x 400 mm. * Installation at the rear, 1x on the left and 1x on the right, high, rigid underrun protection at the rear made of steel according to ECE-R58 * 1 pair of retractable warning signs for overwidth loads, retroreflective red/white, with LED lighting, spiral cable, and plug connection * Arrangement in the front and rear Vehicle area, brake / air suspension system * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS plug connection ISO 7638 (without connection cables) Todjzz Umxopfx Aa Ioc * Parking brake as spring-loaded brake * external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 plug connection * WABCO EBS system * Air suspension system including 1 raising and lowering valve, mounted on the left side behind the axle unit when driving * Driving position adjusts automatically, 2 tamper-proof coupling heads in front ISO 1728 * Air tanks for brake system and air reservoir made of steel (EN 286-2) * Floor, flat floor approx. 30 mm thick, floor sealed around the perimeter, pocket for square tube inserts approx. 80 x 80 mm, arrangement according to drawing * 8 pieces of pocket strips (18 pockets per strip, 4 each on the outside + 10 in the middle) * Body, meets body strength according to EN 12642 XL (VDI 2700) * Tested for a payload of approx. 27,000 kg, front wall, storage for max. 14 square tube inserts approx. 80 x 80 mm (length approx. 1,990 mm) on the inside of the front wall, front wall approx. 2,000 mm high with steel corner brackets, with profiled steel sheet, screwed/riveted to the frame. * 2 pairs of lashing points (allowable lashing force approx. 1,000 kg per ring) on the front wall according to EN 12640 * Rear wall, foldable rear wall approx. 600 mm made of aluminum hollow profiles with 3 tension bars and T-handle locking mechanisms * 2 folding steps on the inside, folding steel corner brackets at the rear at the height of the side panels * Side wall, 4 pairs of folding stanchions at the height of the side panels * VarioFix steel hole outer frame * 4 pairs of stanchio

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M08L/8922, Offer Number: M08L/8922 Machinetype: 2 die - 3 blow transfer header Info: PKO , Stripper , Variable speed Make: NAKASHIMADA Type: PF860 Tjdpfjwi Tflex Aa Ijc Constr. year: 1985 diameter range: 8 (9,5) mm number of dies: 2 number of stations (incl. cut off): 4 max. cut-off length: 80 mm shaft length under head: 60 mm output - pieces/min: 50-120 press power: 70 to Location: In our warehouse

Condition: used, Year of construction: 1993, functionality: fully functional, machine/vehicle number: M06L/8770, Offer Number: M06L/8770 Machinetype: double blow header Make: HILGELAND Tedpfx Aaewi Tlfj Iec Type: CH00KHA Constr. year: 1993 diameter range: 1-4 mm shaft length under head: 20 mm max. cutting length: 36 mm output- piece/min: 460 Location: In our warehouse

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: M08E/7120, Offer Number: M08E/7120 Machinetype: 8 die - 8 blow transfer header Info: bushing cut-off Make: LACHAUSSEE Type: Fo 10 - 712 Constr. year: 1984 diameter range: 6,5 mm number of dies: 8 number of stations (incl. cut off): 9 cutting length: 6-10 mm plane of stroke: 123 mm output - pieces/min: 150 Location: Europe Todpfxjwi Tapj Aa Iec

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: M08L/7569, Offer Number: M08L/7569 Machinetype: 2 die - 2 blow transfer header Info: bushing cut-off , PKO Make: OMEGA Type: 122CL Constr. year: 1989 diameter range: 8,5 mm number of dies: 2 number of stations (incl. cut off): 3 cutting length: 100 mm shaft length under head: 80 mm output - pieces/min: 300 press power: 30 t Location: In our warehouse Tjdpfx Aaswi S S Rs Iec

Condition: good (used), Hello, -The subject of sale is. -Hang 87D 3P double-head riveter. Todpfov I E Scex Aa Iec -Manufacturer: Hang Germany. -Good condition. -The machine is used to rivet eyelets. -Two riveting heads, with adjustable spacing. -Cardboard thickness 0.2-4mm -Weight 570kg -380V power supply -Possible transport by freight forwarder (individual valuation)

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Transfer Header Cold forming SACMA SP250 4 Dies - Revised as new - Fully functional, operational. Revised on 2025. The machine runs without any problems. Available for any tests c/o HBR srl. Machinery fully revised in 2025. Square Wedges. Available with soundproof cabin, conveyor belt and control process Brankamp. Informazioni tecniche: Number of dies: 4 Heading tonnage: 650 KN Maximum cutoff diam 500N/mm²: 10,5 mm. Max. cutoff length: 85 mm. Kickout stroke die max.: 65 mm. Kickout stroke punch max.: 20 mm. Speed pcs. per minute: 275 Power of main motor: 30 KW Todpjwq Dy Asfx Aa Ijc Diam. die: 54 mm. Length die: 90 mm. Diam. punche fixed: 45 mm. Length. punche fixed: 100 mm. Net weight: 11.000 kg. Gross weight: 12.600 kg. Vi aspettiamo in HBR srl a Calolziocorte (LC)

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 90 h, total height: 7,700 mm, installation height: 2,725 mm, ENERPAC SL400N hydraulic gantry system Tjdoylccqspfx Aa Iec - SL400 2FT TRACK HYDRAULIC GANTRY, SET OF 4 LEGS - LL500 LIFTING LUGS 1250 KN EACH, 4 PCS - GST400-3 SKID TRACK / 2FT / LENGTH 3 METERS, 2 PCS - GST400-6 SKID TRACK / 2FT / LENGTH 6 METERS, 6 PCS - HBB10 HEADER BEAM BOX BEAM / LENGTH 10 METER 2PCS - HBB8 HEADER BEAM BOX BEAM / LENGTH 8 METER 2PCS - SSU600 SIDE SHIFT 1500 KN EACH / SET OF 4 INCL TP FRAME 4PCS *Self-contained hydraulic and electronic systems *Intelli-Lift wireless control system *Self-propelled wheels or tank rollers *Full range of supplementary equipment: header beams, lifting lugs, side shift units, skid tracks *Designed and tested in compliance with ASME B30.1-2015 safety standards *Lloyd’s witnessed testing at 125% of maximum working load like new, only 90 working hours

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: M06L/8308, Offer Number: M06L/8308 Machinetype: double blow header Make: PELTZER-EHLERS Type: DKP6 Constr. year: 1978 diameter range: 3-6,5mm Tsdpfx Aowi S D Hea Iec shaft length under head: 8-75 mm max. cut-off length: 100 mm output pieces/min: 150 Location: In our warehouse

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: M08I/8657, Offer Number: M08I/8657 Machinetype: 4 die - 4 blow transfer header Info: bushing cut-off , PKO Make: NAKASHIMADA Type: TH4-6A Constr. year: 1992 Tsdswi Syuopfx Aa Isc diameter range: 2-6 mm number of dies: 4 number of stations (incl. cut off): 5 cutting length: 95 mm shaft length under head: 75 mm output - pieces/min: 80-200 Location: Germany