Used Rip Saw for sale (6,803)

Year of construction: 1992, condition: good (used), Aluminum circular saw, chop saw, glazing bead saw, aluminum saw,machine -Manufacturer: Alfred E.Gohl, glass bead saw type GLS -Saw blade: Ø 225x2.0x32 mm -Drive: 1.1 kW -Speed: 3000 rpm -Dimensions: 1100/650/H1350 mm Njdsif Azfopfx Agwecp -Weight: 152 kg

Condition: ready for operation (used), Year of construction: 2014, saw blade diameter 350 x Ø 32.0 mm capacity degrees: flat 175 x 75 mm capacity degrees: square 110 x 110 mm capacity degrees: flat 100 x 80 mm capacity degrees: square 85 x 85 mm turning speeds 3000 U/min total power requirement 1.5 kW weight of the machine ca. 180 kg dimensions of the machine ca. 870 x 710 x 1435 mm Equipment : - semi-automatic circular saw for cutting PVC and aluminum profiles - two-hand safety operation - Miter adjustment : * left * right 0 / / - Large protective hood, covers entire working area - Saw blade - 2x vertical pneumatic clamping cylinders - Adjustable blade and cutting feed - Air dust gun Work sequence Ncjdpfx Aeyu U Dfjgwjp 1) Setting the cutting angle 2) Inserting the material 3) Adjusting the stroke speed 4) Bring the clamping cylinder up to 20 mm of material 5) Clamp the material 6) The machine is ready for operation by pressing the start button. 7) Press and hold the two SAW buttons, the material is sawn. 8) At the end of the cycle, release both SAW buttons and press the STOP button 9) Open the vice and remove or push the material forward * Special accessories included : - ALU chip extractor

Condition: used, Year of construction: 2000, functionality: fully functional, Robland Z320 Sliding Table Panel Saw - YoM: 2000 Machine is in well used condition, but fully working. Machine would benefit from a good clean. £1,500 (GBP) + VAT. Ncodpfxoynkm Ne Agwop 3200mm Sliding table saw. 1250mm Rip Fence x 3200mm Cross fence stops. Main Saw Blade Max Dia 400mm Scoring blade. Manual 0-45 Deg Blade tilt. Manual Rise and fall on blade. Manual adjustment of the Scribing blade.

Condition: good (used), Year of construction: 1986, used, good condition Manufacturer: Altendorf Model: F45 Year of manufacture: 1986 Machine no.: 86-4-143 GS-certified Motor 5.5 kW Carriage length approx. 2500 mm Cutting width approx. 800 mm Tiltable up to 45° Saw blade diameter: 450 mm Parallelogram guard Mitre fence Extraction connection D 80 and 120 mm Nedjyvv I Nepfx Agwecp Space requirement approx. 2500 mm x 1600 mm x 1500 mm Weight approx. 1000 kg Location: ex stock 54634 Bitburg, free loaded, unpacked Handed over in the current as-inspected condition, without warranty or guarantee

Condition: good (used), Wood band saw, band saw machine, band saw, vertical band saw, bone saw, table saw, bone band saw, butcher's saw -Manufacturer: Reich, band saw, table saw with stand -Motor: Dietz 0.8 kW -Cutting width: max. 200 mm -Cutting height: max. 275 mm -Saw blade: Length 2200 mm Nedeyvrd Tjpfx Agwscp -Dimensions: 830/720/H1715 mm -Weight: 114 kg

Condition: good (used), Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, Table saw, Saw unit: swivels 45° -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 250 mm, (max. Ø 300 mm) -Cutting height 75 mm with saw blade Ø 250 mm (max. approx. 100 mm) -Cutting width: 350 mm -Miter cut: up to 45° Nodpfx Ajyvpm Segwecp -Dimensions 850/850/H1310 mm -Weight: 176 kg

Year of construction: 1980, condition: good (used), Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw -Handover: in its current condition as inspected -Table extension: DIY -Manufacturer: Ulmia, circular saw type 1612SP -Motor power: 2.2 kW / 2800 rpm -Saw blade: Ø 280 mm -Max. cutting height 70 mm Nedpfx Agsf D H Hbewjcp -Miter cut: up to 45° -Length stop: up to approx. 800 mm -Dimensions 1000/1340/H980 mm -Weight: 306 kg

Condition: good (used), Panel saw, table saw, heavy precision circular saw, metal circular saw, cold circular saw -Sliding carriage: 200 mm -Speeds: 90-4000 rpm -Cutting width: 710 mm -Saw blade diameter: max. 260 mm -Max. Cutting height: 40 mm Nodpfjctvp Tsx Agwecp -Height adjustment -Transport dimensions: 1450/900/H1100 mm -Weight: 254 kg

Condition: used, Year of construction: 1997, weight of the machine ca. 3 t Dimensions Saw Band (metric): 18‘ 4-1/2’ x 1-1/2 ‘x .050’ Saw Band Dimensions (inch): 18‘ 4-1/2’ x 1-1/2’ x .050’ Band width in mm: 41 Band length in mm: 5600 Band thickness in mm: 1.3 Nodpfx Agsv I Ercowecp Automatic band saw (360 mm) SMA-REF-7091 Category: Bandsaws Manufacturer: Pehaka Type: PEHAKAMAT 360 ZP Year of manufacture: 2000 Saw blade: 5.600 x 41 x 1,3 mm Working range: 90° round 360 mm 90° square 360 x 360 mm Special features: roller conveyor 1,300 x 380 mm hydr. belt tensioning Dimensions Weight: 3 tonnes

Year of construction: 1987, condition: good (used), machine/vehicle number: 108922, disk of circular saw-Ø: 400 mm Ncjdpohz T Hfsfx Agwjp cutting area at 90° round: 130 mm cutting area at 90° square: 305 x 40 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 245 x 40 mm cutting speed: 10 m/min engine: 380 V, 1,7 kW space needed: 1100 x 1000 x 1900 mm weight: 700 kg

Year of construction: 1970, condition: good (used), machine/vehicle number: 1258, disk of circular saw-Ø: 315 mm cutting area at 90° round: 90 mm cutting area at 90° square: 80 x 80 mm cutting speeds: 12,5 - 25 m/min forward feed speeds: hydropneumat. stufenl. regelbar cutting length: 5 - 1580 mm saw drive: 380 V, 1,8/2,5 kW space needed: 2300 x 1000 x 2800 mm weight: 940 kg Nodpfx Ash I Dvnogwscp

Condition: new, Various bimetal saw blades, HSS, in the following dimensions: 1735 x 13 x 0,9 mm 1630 x 13 x 0.9 mm 1440 x 13 x 0.65 mm 1138 x 13 x 0.65 mm 2375 x 20 x 0.9 mm 2465 x 20 x 0.9 mm Ncedpfjc R Tyfjx Agwsp 2085 x 20 x 0.9 mm 2130 x 20 x 0.9 mm 2140 x 20 x 0.9 mm 1900 x 20 x 0.9 mm 2000 x 20 x 0.9 mm 2750 x 27 x 0.9 mm 2835 x 27 x 0.9 mm 2850 x 27 x 0.9 mm 2950 x 27 x 0.9 mm 3150 x 27 x 0.9 mm 3320 x 27 x 0.9 mm 2950 x 27 x 0.9 mm 2910 x 27 x 0.9 mm 2450 x 27 x 0.9 mm 4530 x 27 x 0.9 mm 4500 x 27 x 0.9 mm 4400 x 34 x 1.5 mm 4640 x 34 x 1.1 mm

Year of construction: 2000, condition: used, machine/vehicle number: 97464, cutting length: min./max. bei 90° 330/5000 mm disk of circular saw-Ø: 450/500 mm min. cutting length at 90°: 330 mm Nodpfxj Uir Eo Agwocp space needed: 6760 x 1590 x 1700 mm weight: 1550 kg

Year of construction: 1986, condition: used, machine/vehicle number: 1358, cutting area round: 400 mm cutting area square: 400 mm simple forward feed length: 600 mm sawing band measures: 6200 x 38 x 1,3 mm band speed: 12 - 100 m/min sawing drive: 380 V, 7,5 kW Njdpfx Aebgnfyegwecp space needed: 2850 x 2100 x 1900 mm weight: ca. 3000 kg

Condition: used, disk of circular saw-Ø: bis 250 mm cutting area at 90° round: ca. 7 5 mm cutting length: 500 mm electrical connection: 380 V Nodpfeb N Ehdox Agwscp sawing drive: 0,75/1,1 kW space needed: 1700/2100 x 900 x 1440 mm weight: 355 kg

Year of construction: 1988, condition: used, machine/vehicle number: 109357, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 240 x 85 mm cutting area in mitre at 45° square: profiles flat 180 x 70 mm cutting speeds: 10/20 m/min forward feed speeds: 0 - 1000 mm/min electrical connection: 400 V, 1,7/2,6 V space needed: 2750 x 1500 x 1900 mm Njdpfx Ageb Sciaswjcp weight: 1350 kg

Condition: used, machine/vehicle number: 40220, throat: 750/430 mm roller-Ø: 350 mm passage height: ca. 230 mm table size: 520 x 520 + 480 x 250 mm band speed: 50 - 300 feed/min engine: 380 V, ca. 1,5 kW Nsdpfx Aoclmy Hsgwocp space needed: 1730 x 880 x 1800 mm weight: ca. 500 kg

Condition: excellent (used), machine/vehicle number: 68131, Cut-off saw Ø max .: 300 mm here cutting area round: 100 mm Nedpfxefug Exj Agwjcp Saw head can be swiveled up to: 45 ° Vice clamping range up to: 160 mm Cutting saw speed: 2500 rpm Drive motor: 230 V, 1.1 kW Required space: 850 x 750 x 1500 mm Weight: 126 kg

Condition: used, machine/vehicle number: 8354, disk of circular saw-Ø: 350 mm cutting area at 90° round: 90 mm cutting area at 90° square: 160 x 70 mm cutting area in mitre at 45° square: 120 x 60 / 60 x 80 mm cutting speed: 30 m/min engine: 1,1 kW Ncsdpfsby Hiksx Agwop space needed: 1000 x 1250 x 1380 mm

Condition: used, for saw blade Ø up to approx.: 280 mm here cutting height approx.: 70 mm saw blade speed: 2600 rpm drive motor: alternating current 220 V, 1,47 kW Space requirement: 670 x 520 x 800 mm Nedpfx Ajb Nwgnjgwocp Weight: 31 kg

Condition: new, Carbide tipped circular saw blades for aluminium machining with the following dimensions: 300 x 3,3 x 32 mm, 72 Z 350 x 3.2 x 20 mm, 84 Z 350 x 3.4 x 32 mm, 56 Z 350 x 3.4 x 32 mm, 72 Z (ground) 355 x 2.2 x 25 mm, 66 Z 350 x 4.2 x 34 mm, 54 Z Ncedpfx Agoc R Ty Aewep

Condition: used, disk of circular saw-Ø: bis 250 mm cutting area at 90° round: ca. 7 5 mm cutting length: 500 mm Njdpfx Agobbbhnewocp electrical connection: 380 V sawing drive: 0,75/1,1 kW space needed: 1700/2100 x 900 x 1440 mm weight: 355 kg

Year of construction: 1966, condition: used, machine/vehicle number: 7293, disk of circular saw-Ø: 400 mm cutting area at 90° round: 120 mm cutting area at 90° square: 110 mm cutting speeds: 10 - 44 m/min forward feed speeds: 0 - 500 mm/min cutting length: 10 - 500 mm electrical connection: 380 V sawing drive: 4 kW Nodobr Hwdjpfx Agwecp space needed: 1360 x 2650 x 1850 mm weight: 950 kg

Year of construction: 1992, condition: used, machine/vehicle number: 7375, cutting length: 5000 mm disk of circular saw-Ø: je nach Bedarf 420 - 500 mm space needed: 6400 x 1400 x 1700 mm weight: ca. 1600 kg Nodpfoz E Snjx Agwscp

Year of construction: 1984, condition: used, machine/vehicle number: 25 948, throat: 485 bzw. 1050 mm roller-Ø: 500 mm passage height: 380 mm table size: Arbeitstisch 780 x 800 mm sawing band length: ueber 2 Laufraeder 3920 - 4050 mm sawing band width max.: 20 mm band speed: 15 - 940 m/min Nsdpfxob N Eh He Agwscp engine: 380 V, 4 kW space needed: 950 x 2130 x 2100 mm weight: 1740 kg