Used Ring Bending for sale (44,853)

Condition: ready for operation (used), For sale: a very solid and fully operational Constantin Hang 150-06, the industry standard for press-fitting and crimping ring binder mechanisms onto folders, binders, and covers. Specifications and features: Bledpsx A Ivvofx Abber • Suitable for 2-ring and 4-ring mechanisms • Powerful mechanical eccentric press • Very robust German construction (cast iron) • Foot pedal operation for safe and fast working • Complete and ready for immediate use • Machine presses and crimps the legs of the ring mechanism in a single operation • Ideal for binderies, file manufacturers, and office supply production Currently set up for 2-ring mechanisms (80 mm), but can be easily adjusted for other mechanisms. Technical data: • Manufacturer: Constantin Hang • Model: 150-06 • Serial number: 102160 • Country of origin: Germany Condition: Good, clean, and working condition. Can be demonstrated immediately.

Condition: good (used), comac Series 3000, Model 303 Heavy-Duty Profile Bending Machine | 3 Driven Rolls The Series 3000 – Model 303 is a powerful and precise profile bending machine designed for demanding industrial bending applications. With its robust construction, three driven rolls, and modular roll system, this machine is suitable for a wide range of profiles, pipes, and tubes. Equipped with a solid 3 kW motor, individually adjustable bending rolls, a free-standing remote control, and both vertical and horizontal operating modes, the 303 offers maximum flexibility and ease of use. The machine complies with the 2006/42/EC Machinery Directive and is built for long-lasting, trouble-free performance. Key features - Compliant with 2006/42/EC safety standards - 3 driven rolls for maximum grip and perfect material feed - Independently adjustable bending rolls for double pre-bending of symmetrical profiles - Lateral guide rolls with three-dimensional adjustment - Modular rolls suitable for most standard profiles - Alloy steel bending rolls, heat treated to 60 HRC - Free-standing safety remote control - Suitable for vertical and horizontal installation - One-piece steel frame for extreme stability - Torque limiter on the upper shaft - Shafts and gears mounted on rolling bearings for high dynamic loads - Spline-driven power transmission for optimal force transfer Technical Specifications - Shaft diameter: 50 mm (upper/lower) - Roll diameter: 180 mm - Motor power: 3 kW - Feed speed: 5.5 m/min - Weight: 720 kg Bending Capacities Profile Up to Minimum bending radius 60 × 10 mm – Ø 450 mm 25 × 5 mm – Ø 200 mm 80 × 20 mm – Ø 400 mm 32 × 32 mm – Ø 400 mm Ø 40 – Ø 400 mm Ø 60.3 × 2.9 – Ø 800 mm Ø 20 × 1.5 – Ø 220 mm Ø 48.3 × 4 – Ø 500 mm 60 × 30 × 2.5 – – 50 × 3 – – 60 × 6 – Ø 600 mm 30 × 4 – Ø 350 mm 50 × 5 – Ø 500 mm 30 × 4 – Ø 350 mm 60 × 60 × 7 – Ø 600 mm Bodpfsx A Iviox Abbslr 50 × 50 × 6 – Ø 600 mm 70 × 70 × 8 – Ø 700 mm 80 × 45 – Ø 500 mm 70 × 40 – Ø 600 mm 80 × 42 – Ø 500 mm

Condition: ready for operation (used), Pressing force: 300 kN/30 t Tool height: 200 mm Stroke length: 0 – 300 mm Bending capacity with prism tool MW 125/240: 200 x 16 / 200 x 24 mm Bedpfx Absx Apgcobelr Bending speed: 0 – 1.3 m/min Drive motor: 380 V, 5.5 kW Weight: 800 kg Space requirement: 1250 x 820 x 1120 mm

Condition: new, tube diameter 33,7 x 3,4 GAS mm tube diameter 35,0 x 2,5 STAHL mm tube diameter 35,0 x 1,5 EDELST mm bending radius min. R10 - R 190 mm bending angle max. 0 - 180 ° tool taper 6-kant 40 mm voltage 230 V total power requirement 0,9 kW weight of the machine ca. 23,0 kg Description: - MediBender "070" digital - with maximum bending performance for 35 x 2.5 mm steel tubes - Excellent bending quality with very tight bending radii . (from 2 x tube diameter) and bending angles between 0° and 180° Blodexab E Sjpfx Abbjr - Easy to operate - High accuracy and reliability - Fast tool changes (within seconds) - Easy to transport - Huge selection of affordable standard tools (metric, gas inch, inch) BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, control type: CNC control, shaft diameter: 50 mm, bending force (max.): 10 t, travel distance X-axis: 200 mm, shaft length: 200 mm, TECHNICAL DETAILS Bodpsxw Sl Refx Abbjlr Maximum torque per roll: max. 2,500 Nm Bending force: 10 t X-axis travel: 200 mm Shaft diameter: 50 mm Shaft length: 200 mm MACHINE DETAILS Control: CNC Dimensions & Weight Dimensions (L x W x H): 1,730 mm x 1,600 mm x 1,520 mm Weight: 1,800 kg Transport packages: 2

Condition: good (used), functionality: fully functional, We offer a set of tools and accessories for press brakes, mainly PROMECAM. Sold as a single lot or in smaller batches. Price on request. Bledpfexvxkqsx Abbor

Condition: good (used), Year of construction: 1996, tube diameter 6 - 28 mm wall strength 2 mm bending radius min. 2 x D Control IPU 20 bending radius max. 5,0 x D mm bending angle max. 190 ° arbor length 3000 mm operating pressure 180 bar hydraulic motor 4 kW weight of the machine ca. 900 kg dimensions of the machine ca. 3,8 x 1,1 x 1,3 m Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Bsdpevtgn Njfx Abbslr Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then ((original paint). Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².

Year of construction: 2020, condition: ready for operation (used), General Data Measurements width 1300 mm Measurements depth 2450 mm Bsdpfxox Aw Hkj Abbelr Measurements height 1900 mm Control Unit Brand SIEMENS This LAFRANCONI LM 400 die bending machine was manufactured in 2020. It features a NC roller feeder, a max stroke rate of 350 1/min, and a material width capacity of 60 mm. The machine operates with a 20 KN center ram force and a 45 mm stroke. Powered by a 10.6 kW asynchronous spindle motor, it adjusts from 20 to 350 rpm. Dimensions are approximately 2450×1300×1900 mm. Contact us for more information about this machine. Application Types Bending

Condition: excellent (used), Year of construction: 1992, Shaft diameter: 40 mm Bending capacity: Flat bar edgewise at 500 mm Ø: 60 x 10 mm Flat bar flatwise at 400 mm Ø: 100 x 15 mm Square bar at 500 mm Ø: 35 mm Angle iron, leg outwards at 450 mm Ø: 50 x 50 x 6 mm Angle iron, leg inwards at 600 mm Ø: 50 x 50 x 6 mm T-section, T outwards/inwards at 600 mm Ø: 60 x 60 x 7/50 x 50 x 6 mm Bjdpfx Abex Anpvjbolr Round bar at 500 mm Ø: 35 mm Shaft speed: 7.5 rpm Electrical connection: 380 V, approx. 1.7 kW Space requirement: 910 x 640 x 1400 mm Weight: approx. 480 kg

Condition: new, tube diameter 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu bar material - diameter 30.0 mm wall strength 2.0 mm revolutions per minute 2.0 U/min voltage 230 Volt Blodpexaa Sdefx Abber total power requirement 1.1 kW weight 80.0 kg range L-W-H 410 x 1000 x 570 mm ERCOLINA MediBender "MB 42 M" - Capacity steel pipe 42 x 3.0mm - Capacity gas pipe 1“1/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm - Minimum radius 2 x D - 6-edge tool holder - Min. outside diameter 5 mm - 1/8“ gas Equipment: - patented fast tool change system - one bending speed - freely movable foot switch - bending tools on request for an additional charge including ERCOLINA microprocessor control: - with 30 programs each program with up to 9 bending angles programmable - in addition, the necessary correction angles can be entered . for each bending angle in the working mode BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 34835H_2027, Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1600mm, 450kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: Bsdpfx Abjx Attyebjlr - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 1450mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 5 pieces / completely continuous

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Bljdjh U Rzgopfx Abbjr Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Year of construction: 2021, condition: new, New high quality ISITAN IRM 1550 x 140 Plate Bending Machine – powered sheet metal bending rolls 3 Rolls – other sizes and capacities in stock STANDARD FEATURES & SPECIFICATIONS Easy operation with mobile control panel with push buttons Conical bending device Very suitable for light and medium plates, aluminium or stainless steel Built according to EC Safety Directives and has CE Mark Manual Drop-End for easy removal of finished ferrule Hot rolled SAE 1050 (CK 45) Steel Rolls Main motor with Brake System Bedpfx Ajhpchyjbbolr Precision Bending with Brake Motor SAE 1050 Quality Certificated Steel Rolls with high tensile strength Two rolls powered by a single gearbox and gear system for top and bottom rolls Spheroid Cast Iron Main Frames Wire grooves at the end of the rolls Precision Bending with Brake Motor Model IRM 2550×140 produced standard with motorised back roll Specification on these 1550mm x 4mm powered bending rolls in the chart below: MODEL Usefull length mm Bending capacity mm Roll diameters Ø mm Roll speed m / min. (dk.) Motor power kw Wire grooves dia. mm Length mm Width mm Height mm Weight kg IRM 1050 x 110 1050 4 110 3 2.2 4 / 7 / 9 / 13 2200 750 1000 990 IRM 1050 x 130 1050 5 130 3.5 2.2 4 / 7 / 9 / 13 2200 750 1000 1200 IRM 1270 x 120 1270 4 120 3 2.2 4 / 7 / 9 / 13 2470 750 1000 1115 IRM 1270 x 140 1270 5 140 3.5 2.2 4 / 7 / 9 / 13 2470 750 1000 1350 IRM 1550 x 110 1550 3 110 3 2.2 4 / 7 / 9 / 13 2700 750 1000 1200 IRM 1550 x 140 1550 4 140 3.5 2.2 4 / 7 / 9 / 13 2700 750 1000 1420

Condition: new, Year of construction: 2025, Mandrel-free pipe bending machine RB 54 - NC-controlled, with large program memory Article number: 4300054 NC control for setting the bending angle Up to 50 programs can be saved High-quality, robust design Fast tool change Purely motor drive Automatically returns to the starting position TECHNICAL DATA General information Bending radius max. 162mm Bending angle max. 210° Bending speed(s) 2rpm Torque 2341Nm Dimensions and weights Length (product) approx. 600mm Width/depth (product) approx. 220mm Bjdpfjvk Scgjx Abbelr Height (product) approx. 470mm Weight (net) approx. 107kg Bending performance Bending performance of pipe material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 650 N/mm² (Ø x wall thickness) 42 x 3mm Electrical data Drive motor power 1.1kW Connection voltage 400V Mains frequency 50Hz Location: from stock - available immediately -

Condition: like new (used), Rothenberger Robend H&W & Plus Set (28681) 4 inserts for pipe diameters 12-15-18-22 mm in a sturdy metal case, as new Blsdpfoxxacmjx Abbor

Condition: used, Machine type : Motorized bending roll Bsdpfow Dd Iyjx Abbelr Manufacturer : Bradbury Control unit : MCE (industrial electrical control panel) Supply voltage : 380 V Phase : 3 Frequency : 50 Hz FLA (Full Load Amperage) : 17.6 A Main motor FLA : 15 A Disconnect short-circuit rating : 200,000 A Internal short-circuit rating : 65,000 A Electrical diagram no. : ED3033 Electrical serial no. : B014541 Machine Application The Bradbury bending roll is used for rolling and forming sheet metal into precise cylinders, cones, or arcs. It is employed in the production of ducts, tanks, tubes, or metal shells, and can be integrated into profiling or cutting lines. Features / Differences – Dedicated MCE control panel, with high-capacity electrical protection (200,000 A). – Main motor rated at 15 A, operating on standard industrial 3-phase power. – Full electrical documentation under reference ED3033 for operation and maintenance. – Compatible for integration within Bradbury automated coil processing lines.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 34835H_2026, Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1600mm, 450kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves Bljdpfx Absx Attgsbor -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 1450mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 5 pieces / completely continuous

Condition: excellent (used), Rope guide make steel (28341) ZB rope guide ring 8 SLI Make steel (28341) Blsdpfok Twwlox Abbsr NO.2133005430 Weight 3,5 kg

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 34835_20_28, Tool cabinet for press brake Bodpfx Aex Atr Asbbelr Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 990mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 4 pieces / completely continuous

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 3483520_28, Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 990mm - Trade width 130mm available Bledpex Atriofx Abber - Trade depth usable 1100mm - Number of shelves: 4 pieces / completely continuous

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 3483420_25_31, Tool cabinet for press brake -ausziehbare drawers, allowing the two-sided access to the tools -beliebige Hoehenverstellung the Einlegeboeden -robust steel construction, powder coated in any RAL palette -Lateral Gabelfuehrungsschienen for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) Bledpfjx Atq Ssx Abbjr -The cabinet can be dismantled - Number of drawers: 4 Pieces - Dimensions of drawer: - Total height 1200mm / 850mm Overall width / total depth 1050mm - Dimensions of the drawers in a drawer: - Fachhhoehe set at 210mm (is varriabel) - Trade Overall Height 990mm usable ohnen Zwischenboeden - Trade width 130mm available - Trade depth usable 980mm - Number of Zwischenboeden: 3 pieces

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 34832025_32, Tool cabinet for press brake Bjdsx Atqxjpfx Abbslr -ausziehbare drawers, allowing the two-sided access to the tools -beliebige Hoehenverstellung the Einlegeboeden -robust steel construction, powder coated in any RAL palette -Lateral Gabelfuehrungsschienen for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 Pieces - Dimensions of drawer: - Total height 1200mm / 850mm Overall width / total depth 1050mm - Dimensions of the drawers in a drawer: - Fachhhoehe set at 210mm (is varriabel) - Trade Overall Height 990mm usable ohnen Zwischenboeden - Trade width 130mm available - Trade depth usable 980mm - Number of Zwischenboeden: 3 pieces

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 3483425_32, total length: 1,050 mm, total width: 850 mm, total height: 1,240 mm, overall weight: 310 kg, number of drawers: 12, height adjustment type: mechanical, product height (max.): 3 mm, Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken Blsdpfx Abex Atp Uebjr - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 34834_25_31, total length: 1,050 mm, total width: 850 mm, total height: 1,240 mm, overall weight: 310 kg, number of drawers: 12, height adjustment type: mechanical, product height (max.): 3 mm, Tool cabinet for press brake Good for AMADA / PROMECAM or Type A Bjdpfx Ajx Atpnsbbelr L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 34834_2025_25, total length: 1,050 mm, total width: 850 mm, total height: 1,240 mm, overall weight: 310 kg, number of drawers: 12, height adjustment type: mechanical, product height (max.): 3 mm, Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) Bljdpfx Abex Atn Rsbjr -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece