Used Reduce for sale (2,891)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Listing
Boxmeer
979 km
Forklift
CaterpillarGP40NT
Call
Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 2 h, load capacity: 4,000 kg, lifting height: 3,300 mm, fuel type: gas, mast type: duplex, motor manufacturer: Mitsubsihi, fork length: 1,200 mm, tire condition: 100 %, empty load weight: 6,000 kg, Equipment: CE marking, lighting, sideshift, trailer coupling, Make: Caterpillar
Model: GP40NT
Year of Manufacture: Unused, 2025
Serial Number: CT40B-00019
Operating Hours (recorded): 2
Engine Make: Mitsubishi
Engine Model: GK45VL01M
Fuel: LPG
Voltage: 12
Dimensions L x W x H (mm): On request
Weight (kg), approx.: 6000
Nwodpfxjzdkgmo Abksh
Quantity in Stock: 1
Undercarriage (condition in %): 100
Capacity (kg): 4000
Max. working height (mm): 3300
Ground clearance (mm): 2320
Comments: New forklift offered at a reduced price, all CE-approved safety accessories, duplex mast 3300mm, cascade side-shift with 1200mm forks.
Listing
Temse
884 km
Mobile container tipper 45°
MaxpacContainer tipper
Call
Year of construction: 2026, condition: new, functionality: fully functional, Maxpac currently has a container tilter in stock. The first photos show the actual machine; the last two are examples.
Faster loading and unloading with minimal product loss
Deliver your bulk products to the packaging line in a sustainable way
Nsdpfjy Ick Uox Abkswh
The container tilt machine, or container tipper, is a simple yet robust system that enables faster loading and unloading of containers with minimal spillage. As a result, it forms a valuable addition to the packaging process. The optimized workflow from start to finish not only leads to increased productivity, but also ensures higher quality of all packaged products.
The machine is PLC-controlled, allowing for even distribution of bulk materials with a continuous and consistent feed to the packaging line. This improved productivity also results in uniform product packaging and significantly reduces wastage.
It reduces waiting times for emptying containers, ensuring packaging operations can continue seamlessly. Consequently, demurrage and detention costs decrease drastically. The risk of worker injuries is also minimized, resulting in positive impacts on several HR-related costs.
The container tilting machine is adaptable to various container sizes and types, making it suitable for a broad range of packaging requirements. This allows for efficient processing and packaging of different types of bulk materials.
A top recommendation for businesses seeking to achieve significant profitability gains.
Listing
Brakel
1,192 km
BTS-Plastic Foil Compactor
BTS-Folienverdichter
Call
Year of construction: 2026, condition: new, The BTS-Plastic Foil Compactor is the solution to keep large bulky packaging film under control. With its space-saving footprint and secure stand you can easily reduce all foil waste to a minimum of volume. The retaining ring in the plastic foil compactor prevents annoying expansion so that the foils stay where they belong. The filled bags can be baled by using a waste baler or disposed of in a recycling bin.
By collecting and compacting this valuable and recyclable material you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle.
Foil Compactor size: 1000 H x 450 W x 420 D mm
Foil Compactor weight: 5.5 kg
Foil Compactor colour: RAL 9006 silver
Foil Compactor Bag volume: 240 Ltr.
Foil Compactor Bag weight capacity: up to 15 kg
Nsdodzvhwspfx Abkewh
Easy collecting the packaging films
Clean and safe working environment
Retaining ring prevents the annoying material expansion of the foils
Optimum utilization of bags
Reduces frequency of waste collection
A quality product “Made in Germany”
Suitable for collecting and compacting
Bulky packaging films and foils
Foam foils
Optional extras
BTS-Foil Bags 240 Ltr.
Plastic Foil Compactor colour RAL
(minimum order 40 units)
BTS-Waste Baler for plastic film and foils
Plastic Film Compactor, Foil Compactor, Plastic Film Collector, Foil Collector, Sack Holder

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month
Listing
Offenbach an der Queich
1,233 km
Accessories
DeckelWerkzeugaufnahmen-Spanntechnik
Call
Condition: good (used), amount 1 Palette
Set of milling and lathe accessories, primarily Deckel-compatible tool holders,
arbors, clamping accessories, and gears.
-> SK/ISO-style tool holders — various lengths, some with clamping nuts, others
with a through-hole for drive pins.
-> Special Deckel tool holders — one holder is even labeled “Model Deckel.”
-> Cylindrical collet holders — several sizes, neatly sorted in a red holder.
-> Reducing sleeves — for adapting different tool shanks.
-> Threaded adapters — short, thick adapter pieces with internal threads.
-> Toothed drive shafts — several pieces, some with hex heads, some with
longitudinal teeth.
-> Arbors / milling mandrels — longer shafts with a pin or collar, typically
used for milling cutters or disc tools.
Nwedpfxszhcgas Abkoh
-> Short centering or guide pins — small cylindrical parts with threads or a
press fit.
-> Red tool holder block — for six collet holders.
-> Green-red machine module — presumably part of a top milling machine (e.g.,
angle head or accessory holder).
Complete package price
Listing
United Kingdom
381 km
Full protected laser cutting machine
BodorP Series
Call
Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, All-round sheet fiber laser metal cutting machine
Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands.
Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved.
The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting.
Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter.
The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value.
With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing.
Condition: New
Laser Type: Fiber Laser
Laser Power: 1500W - 30000W
Cutting Area: 3048*1524mm - 6100*2500mm
Cutting Speed: 0-169m/min
Positioning accuracy: ±0.03mm - ±0.05mm
Repositioning accuracy: ±0.02mm - ±0.03mm
Nwjdshwaapopfx Abksh
Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT
CNC or Not: Yes
Cooling Mode: WATER COOLING
Listing
Urk
931 km
Baader 601 Separator
Baader601
Call
Condition: good (used), Baader 601 Separator
Вaader 601 provides soft separation of raw meat material from a waste components – bones, skin etc. A flexible squeezing belt transports the product to a perforated drum. It gently squeezes the softer particles like meat and fat through the holes, then the harder particles such as bones, sinews and cartilage stays outside of the drum.
Capacity: up to 800 kg per hour
The throughput can vary in dependence of the drum hole size, product and its pre-treatment, the selected pressure etc.
Baader 601 is а user-friendly machine. Its cleaning is easy and quick. The machine is built in accordance to worldwide recognised sanitary standards. A pressure system ensuring gentle product processing and reduced machine wear. Machine has castors for easy handling.
Manufacturer: Baader
Model: 601
Capacity: Up to 800 kg./hour
Nwjdpfx Abjzgtanekjh
Drum: 3 mm and 5 mm
Power: 400V / 50Hz / 3kW
Machine dimensions (LxWxH): 950x950x1.800 mm
Machine weight: 500 kg.
Listing
United Kingdom
381 km
Full protected laser cutting machine
BodorC Series
Call
Condition: new, functionality: fully functional, Year of construction: 2026, Base sheet fiber laser metal cutting machine with full protection
Nwodehwaa Eepfx Abksh
Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options.
The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting.
Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence.
Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter.
The cutting process works even at the edge of thin sheets, and ensures no chatter marks.
With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing.
Condition: New
Laser Type: Fiber Laser
Laser Power: 1000W - 40000W
Cutting Area: 3048*1524mm - 12500*2600mm
Cutting Speed: 0-110m/min
Positioning accuracy: ±0.05mm
Repositioning accuracy: ±0.03mm
Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT
CNC or Not: Yes
Cooling Mode: WATER COOLING
Listing
Friedrichsdorf
1,211 km
Articulated Jib Platforms
Manitou180 ATJ
Call
Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 3,280 h, load capacity: 200 kg, empty load weight: 8,100 kg, construction height: 2,530 mm, fuel type: diesel, total length: 7,770 mm, drive type: Diesel, arm reach: 10,600 mm, construction width: 2,300 mm, working height: 17,650 mm, Articulated Boom Lift
Transmission: Hydrostatic
Technical Condition: Good
Front Tire Type: Solid Rubber
Front Tire Condition: 80 - 100%
Rear Tire Type: Solid Rubber
Rear Tire Condition: 80 - 100%
Description: The articulated platform Manitou 160 ATJ+180 ATJ is ideal for outdoor work on uneven or inclined surfaces. With a lifting capacity of 230 kg, an articulation height of 7.38 m, and a working height of 16 - 18 m, it ensures a wide working range. Featuring a diesel engine and four-wheel drive combined with three control modes, the 160 ATJ+180 ATJ stands out for its high performance and autonomy. The ergonomic control panel design provides a clear and user-friendly workspace. Thanks to hydraulic speed control, noise levels and fuel consumption are reduced.
Nsdpfjzgybrsx Abkowh
Listing
Gemert
966 km
Used dust suppression machine Spraystream SS10
SPRAYSTREAMSS10
Call
Condition: like new (used), Year of construction: 2021, empty load weight: 16 kg, fuel type: electric, Several mist cannons for sale from Spraystream Mini.
Spraystream offers high-tech atomization technology that reduces dust dispersion by up to 90%.
Nedpfx Aezg A Stsbkowh
With water connection.
Year of manufacture: 2021.
5 atomizers.
10-meter mist range.
230V.
Price per unit: €500,- excluding VAT.
Multiple units in stock!
Listing
Staphorst
970 km
CNC Bending Roller
Luna8835 18/05
Call
Condition: excellent (used), functionality: fully functional, Year of construction: 2004, Brand : Luna
Type : 8835 18/05
Year of construction: 2004
Capacity : 1890x0.5 (250 N/mm2)
Mains voltage : 3x400V / 3x230V
Roll diameter : Ø 35 mm
Motors : 0.75 kW
max. working speed : 7.1 m/min
Machine weight : 900 kg
Art.no. : 6812
Complete, well-functioning CNC plate roller for rolling thin material up to 0.5 mm plate (250 N/mm2).
Especially suitable for rolling aluminum sheet.
Previously used for rolling lampshades.
Machine description Luna:
“The 8835 is a roll bending machine for the production of small radius louvres and reflectors to meet the demands of the latest small diameter light tubes.
The machine is designed with three independant bottom rolls to reduce prodcution time to a minimum. All rolls run in adjustable support bearings to permit easy roll adjustment for materials of different hardness and thickness. The top roll crowning is carried out by means of a crossbeam, which tilts to make room for the bent part.
All rolls are hardened and chromium-plated with polished surfaces to avoid marking. The control system allows the programming of constant radius parts as well as parabolic shapes. 100 programs can be stored. ”
Njdpfx Aboh Ngd Rekjwh
Full documentation available:
- Operating manual (in English)
- Electrical Schematics
Listing
Mouvaux
834 km
Meat processing machine
FAMTrancheuse TS-10
Call
Condition: ready for operation (used), functionality: fully functional, The FAM TS-10 is an industrial-grade stainless steel slicer specifically designed for cross-cutting vegetables, fruits, and other food products. Adapted for high-volume production environments, it ensures smooth, consistent, and high-quality cutting, guaranteeing product uniformity and freshness. Its high-speed cutting wheel, equipped with angled blades, provides clean slices while preserving the product's structure and shelf life.
Versatile, the FAM TS-10 offers various cutting options: smooth slices, corrugated slices, julienne, half-moons, or even wedges, thanks to its interchangeable accessories. This flexibility makes it an ideal solution for a wide variety of products: carrots, leeks, lettuce, potatoes, cucumbers, fresh fruits, and vegetables.
Its stainless steel construction guarantees perfect hygiene and simplified maintenance. The articulated hopper and removable covers facilitate cleaning and reduce downtime. With a capacity of up to 3,000 kg/h, the FAM TS-10 is a reliable, robust, and high-performance machine for optimizing your production lines.
Do not hesitate to contact us for a quote or a technical demonstration of this essential machine.
Technical specifications:
Brand: FAM
Model: TS-10 (TS-1D)
Year: 1999
Dimensions: 3050 x 800 x 1600 mm
Weight: 350 kg
Power supply: 380 V – 50 Hz – three-phase
Installed power: 3.5 kW
Nwjdpfx Abszd Sk Tokeh
Capacity: up to 3,000 kg/h
Cutting sizes: 1.6 to 40 mm
Listing
Wekerom
949 km
Articulated boom lift
GenieZ-60/37 DC
Call
Condition: excellent (used), Year of construction: 2018, operating hours: 296 h, fuel type: electric, Year of manufacture: 2018
Drive: Wheel
GVW: 7.466 kg
Mast: articulated arm
Lifting capacity: 227 kg
Working height: 2.020 cm
CE mark: yes
Technical condition: very good
Visual appearance: very good
Njdpfozggfwjx Abkewh
Genie Z-60/37 DC – Year 2018 | Only 296 Operating Hours | Valid Inspection
For sale: a well-maintained Genie Z-60/37 DC from 2018 with only 296 operating hours. This fully electric articulating boom lift is ideal for applications requiring quiet, emission-free and efficient operation, both indoors and outdoors on firm surfaces.
With a working height of approximately 20 metres (66 ft) and a horizontal outreach of approximately 11 metres (36 ft), this machine delivers excellent performance for a wide range of access applications. The electric drive system ensures low operating costs, reduced maintenance requirements and environmentally friendly operation.
The machine is in excellent condition, has exceptionally low operating hours and comes with a valid inspection certificate. Ready for immediate use.
Key Features:
Year: 2018
Only 296 operating hours
Valid inspection
Working height: approx. 20 m
Horizontal outreach: approx. 11 m
Fully electric drive system
Quiet and zero-emission operation
Excellent condition
Ready for immediate deployment
An excellent opportunity to acquire a fully electric Genie boom lift with exceptionally low operating hours.
Contact us for more information or to arrange a viewing.
Listing
Wekerom
949 km
Articulated boom lift
GenieZ-60 FE
Call
Condition: excellent (used), Year of construction: 2024, operating hours: 87 h, fuel type: hybrid, Year of manufacture: 2024
Drive: Wheel
GVW: 7.776 kg
Mast: articulated arm
Lifting capacity: 227 kg
Working height: 2.020 cm
CE mark: yes
Technical condition: very good
Visual appearance: very good
Genie Z-60 FE – Year 2024 | Only 87 Operating Hours | Valid Inspection
For sale: a nearly new Genie Z-60 FE from 2024 with only 87 operating hours. This versatile hybrid articulating boom lift combines the benefits of fully electric operation with the flexibility of a hybrid drive system, making it ideal for both indoor and outdoor applications.
With a working height of approximately 20.16 metres (66 ft) and a horizontal outreach of approximately 11.15 metres (36.6 ft), the machine offers excellent performance and versatility. The 4WD system ensures outstanding capability on rough terrain.
Thanks to the extremely low operating hours, this boom lift is in excellent condition and ready for immediate use. The machine comes with a valid inspection certificate, allowing you to put it straight to work without additional investment. The hybrid technology provides low operating costs, reduced emissions, and maximum productivity on a wide range of projects.
Key Features:
Year: 2024
Only 87 operating hours
Valid inspection
Working height: approx. 20.16 m
Horizontal outreach: approx. 11.15 m
Hybrid / electric drive system
4WD rough-terrain capability
Excellent condition
Ready for immediate deployment
A unique opportunity to purchase a virtually new Genie Z-60 FE without the lead times and higher costs associated with a new machine.
Nedpozggcpjfx Abkjwh
Contact us for more information or to arrange a viewing.
Listing
Trittau
1,230 km
Plate rolling machine
Faccin4HEL 2122
Call
Condition: good (used), functionality: fully functional, Year of construction: 2015, Four-Roller Plate Rolling Machine
Manufacturer: FACCIN Model: 4HEL 2122
Year: 2015
Technical Specifications
Brand: FACCIN
Model: 4HEL 2122
Year of manufacture: 2015
Working width: 2050 mm
Roll geometry: Linear guides
Top roll diameter: 225 mm
Bottom roll diameter: 210 mm
Side roll diameter: 165 mm
Bending force against top roll: 100 t
Motor power: 9 kW
Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m
Weight (approx.): 4,200 kg
Performance
Rolling capacity (full working width): 12 mm
Pre-bending capacity (full working width): 8 mm
From tube diameter: 1,125 mm
With yield strength: 260 N/mm²
Rolling capacity (full working width): 8 mm
Pre-bending capacity (full working width): 6 mm
From tube diameter: 295 mm
With yield strength: 260 N/mm²
Rolling capacity (full working width): 8 mm
Pre-bending capacity (full working width): 6 mm
From tube diameter: 1,125 mm
With yield strength: 360 N/mm²
Rolling capacity (full working width): 6.5 mm
Pre-bending capacity (full working width): 5 mm
From tube diameter: 295 mm
With yield strength: 360 N/mm²
Rolling capacity (half working width): 15 mm
Pre-bending capacity (half working width): 10 mm
From tube diameter: 1,125 mm
With yield strength: 260 N/mm²
Equipment
- Double linear guide system for roller movement
- Extra wide bearing blocks
- MCS double bearing system for roll rotation
- Extra heavy-duty, doubly supported drop end bearing
- Electronic parallelism system (EPS)
- Hardened rolls for maximum wear protection and reduced sheet damage
- All rolls polished after heat treatment
- SIEMENS S7 PLC touch control
- Safety cable with emergency stop and CE certification
- Water cooler for hydraulic unit
All details without guarantee.
A live demonstration under power is possible at any time in our showroom.
Njdpfx Abozguumskjwh
Listing
Neukamperfehn
1,046 km
High-bay warehouse
Gitterrückwand für Palettenregal47.000x4.000mm
Call
Condition: new, Grid back panel for pallet racking, new
Manufacturer: Garantell
- Protection against falling goods
- Easy to assemble
- Complete delivery including all accessories
- For indoor use
According to drawing (see images)
Mesh size: 50x50
Width: 47,000 mm
Height: 4,000 mm
Supports: 17
Walls: 1
Surface treatment: Wire and band hot-dip galvanized
with a zinc coating of ~7 μm before the welding process.
Included in delivery:
Connector for back panel: 42 pieces
consisting of:
- Fastener, back panel grid: 42 pieces
- Self-drilling screw 4.2x13, galvanized: 168 pieces
- Flange nut M8, galvanized: 84 pieces
- Flange screw M8x20, galvanized: 84 pieces
Fastener for mounting from the outside, back panel grid: 44 pieces
consisting of:
- Mounting fastener: 176 pieces
- Metal screw: 4.8x13: 352 pieces
Bolt package for console, M8x25: 51 pieces
consisting of:
Njdpfx Abjzdiwgokjwh
- Flange nut M8, galvanized: 102 pieces
- Flange screw M8x20, galvanized: 102 pieces
- Washer 8.4x25x2, galvanized: 102 pieces
Product catalog/Assembly instructions: 1 piece
Panel (HxW) 2,200x2,000 Mesh 50x50, Ø 3.00x4.00: 41 pieces
Panel (HxW) 800x2,000 Mesh 50x50, Ø 3.00x4.00: 1 piece
Panel (HxW) 1,100x2,000 Mesh 50x50, Ø 3.00x4.00: 1 piece
Panel (HxW) 1,900x2,000 Mesh 50x50, Ø 3.00x4.00: 1 piece
Front bracket 250 mm: 51 pieces
Consisting of packages:
1 piece W 300mm x D 2130mm x H 2,074mm, 157 kg
1 piece W 800mm x D 2060mm x H 2,374mm, 850 kg
2 pieces total
Note:
This grid back panel is being sold as part of a customer order cancellation and is therefore offered at a reduced price.
Your contacts at our company:
Mr. Andre Evering
Mr. Mario Klöver
Mr. Falk Deutsch
General information about the item:
This item is offered for collection only. Any additional transport
or shipment of this item will incur additional costs, which can be requested separately
depending on the delivery location or scope of delivery.
Listing
Germany
1,192 km
DN SOLUTIONS PUMA TT2100SYY
DN SOLUTIONSPUMA TT2100SYY
Call
Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 700 mm, total height: 2,250 mm, total width: 2,360 mm, controller manufacturer: FANUC, product length (max.): 3,880 mm, number of axes: 8, This 8-axis DN SOLUTIONS PUMA TT2100SYY was manufactured in 2023. As new, showroom model. It features a twin-spindle and twin-turret configuration, with a maximum spindle speed of 5,000 RPM and a bar capacity of 65 mm. The machine is equipped with 24 turret stations and high-rigidity linear roller guides for enhanced stability. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA TT2100SYY turn-mill centre we have for sale. Contact us for further details.
Nodoyrtbqjpfx Abkswh
• Chuck size: 8" (204 mm)
• Bar capacity: 65 mm
• X1/X2 travel: 165 / 100 mm
• Z1/Z2 travel: 700 / 700 mm
• Y1/Y2 travel: 30 / 40 mm
• Spindle motor power: 22 / 18.5 / 15 kW
• Turret stations: 24 (12 + 12)
• Turret interface: BMT 55
• Guideway type: High-rigidity linear roller guides
• Spindle type: Integral motor spindle with wide speed range
• Turret capability: Upper and lower turrets with Y-axis and 12 driven stations each
• Structural design: Highly stable Y-axis design for high-volume serial production
Additional equipment
• Cooling and filtration: High-pressure coolant through turret; Oil skimmer
• Sub-spindle features: Coolant supply through sub-spindle; Parts ejector
• Parts handling: Parts catcher; Parts conveyor for both spindles
• Calibration: Tool setter (auto-electric)
• Automation and interfaces: Air conditioning (electrical cabinet); Bar feeder interface; 3-color tower light
• Optional: Chip conveyor (hinge belt conveyor). Price on request
• Machine is delivered with standard basic package: Turret fully equipped, base holder included.
• Optional:
• 5 pcs. External turning tool holders SQ20, BMT 55 (500-0696)
• 2 pcs. Facing tool holders R/L (500-0701)
• 1 pc. Double external turning tool holder HS/GS (500-0868)
• 2 pcs. Double external turning tool holders HS (500-0705)
• 1 pc. Parting tool holder (500-0709)
• 7 pcs. Boring bar holders; BMT 55 ID 32 (500-0698)
• 2 pcs. Triple internal turning tool holder GS (500-0707)
• 2 pcs. Cover IK (500-0711)
• 1 pc. Reducing sleeve set Boring (n/a)
• 2 pcs. Reducing sleeve set OD 32 ID 20/25 (500-0710)
• 1 pc. Adapter set PRECI-FLEX ER25 (BMT 55P) (500-0523)
• 2 angled externally cooled external heat sinks Eppinger
• 2 straight externally cooled external heat sinks Eppinger
Additional Information
As new, showroom model
Technical Specification
Counter Spindle Yes
Driven Tools Yes
Listing
Birmingham
439 km
Vertical turning lathe
Dorries ScharmannVCE2000/1800MC-FC Contumat
Call
Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance Z-axis: 1,500 mm, chuck outer diameter: 1,800 mm, spindle speed (max.): 315 rpm, turning diameter: 2,000 mm, turning height: 2,450 mm, rotational speed (max.): 3,000 rpm, year of last overhaul: 2026, FOR SALE – 12 MONTHS GUARANTEE – CE MARKED
A DORRIES-SCHARMANN VCE2000/180MC-FC CONTUMAT Vertical Turning, Centre for high accuracy heavy cut turning, high precision heavy PCD drilling and continuous rotary milling
Delivered in 2002. Condition: Excellent - see INTRO page
CNC specification – high level Siemens 840D
Nwedpfsy Uw Emox Abkjh
Hydrostatic crossrail and ram guideways. Cutting and positioning feed rates up to 18m/min
A 9-STATION MAGAZINE is for turning toolheads & machining heads. These heads are picked up by the ram during cycle
The turning and milling heads are fed by a KELCH DOUBLE GRIPPER TOOL CHANGER, as seen on most machining centres
The tool changer collects the turning tools (CAPTO C8) and live spindle tools (SK50) from a WERO magazine
The magazine as supplied with this machine originally has the capacity to hold 60 Capto C8 tools and 76 SK50 tools
The KELCH toolchanger can change the tools in both vertical and horizontal working positions. This means, for example, that various SK50 tools can be fed into a right angle milling head while it remains on the ram
MACHINE SALE POSSIBILITIES
The machine specification will be finalized by the purchaser and VTT-WB
New guarding will be supplied to match the final specification
GUIDE PRICES
A – machine without the pallet system but with the full tool changing and tool storage system. New guarding. CE marking 12 months full warranty, including 96% uptime guarantee and 12 months Preventive Maintenance
Tool storage capacity can be reduced within this price
£525,000
B – machine without the pallet system and toolchanging and storage system replaced with 30 pocket disc type magazine
New guarding. CE marking 12 months full warranty, including 96% uptime guarantee and 12 months Preventive Maintenance
£540,000
C – machine to original specification including full pallet system and full tool change system
New guarding. CE marking 12 months full warranty, including 96% uptime guarantee on machine but excluding pallet and toolchange system
£650,000
Listing
Wiefelstede
1,085 km
Milling chuck
unbekanntMK4
Call
Condition: good (used), Tool holder, milling holder, milling tool, boring head, spindle tool, reducing sleeves, mounting bracket
Nwjdpfx Aozdyn Tobksh
-Milling chuck: MK4 chuck
-Shaft: Ø 27 mm
-Shaft length: 520 mm
-Dimensions: Ø 44 x 665 mm
-Weight: 5.6 kg
Listing
Germany
1,228 km
Vacuum press
MSMVPS 3514 Professional
Call
Year of construction: 2026, condition: new, New machine
Year of manufacture: 2026
The space-saving, swiveling vacuum press with a pressing area of 3500 mm x 1420 mm.
Technical standard equipment of the vacuum press:
Unless otherwise agreed, the vacuum press is powder-coated in RAL 7012 and RAL 7035 color shades. Custom colors are available upon request and must be clarified in advance, which may result in additional charges.
Welded table construction designed for professional use, mounted on a swiveling chassis cart, standing on 4 swivel castors, surface load capacity of 150 kg. When not in use, the machine can be swiveled for space-saving storage and locked in place, reducing the required depth to only 800 mm. The table surface consists of a 22 mm thick HPL-MDF board, with a slotted vacuum distribution plate made from MDF covering the pressing area.
The membrane frame is supported by 2 gas pressure springs mounted on the sides of the machine. A natural rubber membrane with 2 mm thickness, 780% elongation capability, and temperature resistance up to 70°C is installed, attached by a clamping system for efficient membrane changes. The all-around sealing of the press area is provided by a sealing profile installed in the membrane frame.
Oil-circulated vacuum pump with a suction capacity of 40 m³/h and two vacuum tanks with a total capacity of 200 liters. Evacuation and ventilation of the press area is managed via a 3-way ball valve located at the front of the machine.
The machine is delivered pre-assembled on a pallet. Please note that unloading requires a forklift with sufficient lifting capacity and fork length.
Additionally, it is possible to book initial setup and a quick instruction by one of our staff members. If desired, we are happy to provide you with a separate offer for this service.
Summary of key data:
- Welded frame construction
- Highly flexible natural rubber membrane, thickness: 2 mm, elongation: 780%, very high recovery capability, suitable for temperatures up to 70°C
- MDF vacuum distribution plate
- Digital vacuum control VAK-CONTROL 1 with auto shut-off
- Vacuum pump: 40 m³/h, oil lubricated
- Max. vacuum: -0.99 bar
- Max. pressing pressure up to 9.9 t/m²
- Connected load: 1.40 kW (400 Volt)
- Vacuum tank: 200 liters
- 4 swivel castors with locks
- Additional 13 mm vacuum connection
- Pressing area: 3500 x 1420 mm
- Table height to vacuum distributor plate: approx. 895 mm
- Machine height closed: approx. 960 mm
- Machine height closed with cover plate: approx. 1030 mm
- Installation dimensions, operational: 3790 x 1700 x 2150 mm (LxWxH)
- Installation dimensions, swiveled: 3790 x 800 x 1750 mm (LxWxH)
Commodity code: 84659400
Nsdpfx Ajywpt Iebkswh
Net weight: 570 kg
Gross weight: 660 kg
Includes cover plate 3514
With a cover plate, you not only protect your membrane from UV radiation, but also convert your mobile-base vacuum press into a mobile worktable that can be used flexibly in your company.
- Coated cover plate
- Solid welded steel frame
- Opening support by gas pressure springs
Commodity code: 84669280
Net weight: 105 kg
Gross weight: 105 kg
The cover plate is only available in combination with a vacuum press.
Listing
Germany
1,228 km
Return system Barbaric
BarbaricReturn RTS Compact
Call
Year of construction: 2024, condition: new, Return System
Year of manufacture: 2024
The RTS Compact is a standalone system that can be connected to any edgebanding machine (KAM), regardless of the manufacturer. The feed speed is continuously adjustable to match the speed of the edgebander. The RTS Compact is supplied complete with a control cabinet and is ready for operation immediately after installation.
Optional: "RTS Compact Conveyor Extension" for easy rotation of parts during cross-edge banding.
Optional: "RTS Compact Ergonomics Package" available. A lift table and air cushion table are used at the end of the return conveyor. This option enables ergonomic operation.
- Compatible with edgebanders from all manufacturers
- Allows single-operator control of the edgebander
- Maximum ergonomics
- Reduced personnel costs
- Gentle material handling
- Installation time approx. 0.5 day
- Turning device for small parts
- With conveyor belt L 4500 x W 800 mm
Single-track roller rail
Nwedpfjw Nadmjx Abkjh
RTS Compact control, optional control box
Availability: short-term
Location: Flörsheim
Listing
Oldenzaal
1,025 km
Suitcase
PactonZ3-002 / Steering axle
Call
Condition: used, axle configuration: 3 axles, first registration: 03/2007, loading space length: 13,600 mm, loading space width: 2,500 mm, loading space height: 2,520 mm, total length: 13,810 mm, total width: 2,600 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 30 %, color: white, Year of construction: 2007, Equipment: ABS, Tire size: 385/65R22.5
Rear axle 1: Tire tread: 30%; Reduction: simply reduced
Rear axle 2: Tire tread: 40%; Reduction: simply reduced
Rear axle 3: Tire tread: 40%; Reduction: simply reduced
Unladen weight: 9,500 kg
Payload: 32,500 kg
GVWR: 42,000 kg
Body brand: OTHER
Nodpfx Abszhag Dekowh
Damage: none
= Company information =
Heisterkamp Used Trucks BV doesn’t just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today’s requirements, and comply with the high standards of our industry.
Details
- Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands
- Phone:
- Email:
- Website:
Trust Seal
Dealers certified through Machineseeker

Listing
Germany
1,293 km
Full protected laser cutting machine
BodorC Series
Call
Condition: new, Year of construction: 2025, Base sheet fiber laser metal cutting machine with full protection
Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options.
The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting.
Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence.
Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter.
The cutting process works even at the edge of thin sheets, and ensures no chatter marks.
Nwodpfohv U S Tjx Abkoh
With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing.
Condition: New
Laser Type: Fiber Laser
Laser Power: 1000W - 40000W
Cutting Area: 3048*1524mm - 12500*2600mm
Cutting Speed: 0-110m/min
Positioning accuracy: ±0.05mm
Repositioning accuracy: ±0.03mm
Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT
CNC or Not: Yes
Cooling Mode: WATER COOLING
Listing
Thisted
1,144 km
Centrifugal pump
CSFASH 65-4-10/BM.CDPZTH1
Call
Condition: new, Year of construction: 2017, Item: AL-10509-CSF Pump 7.5kW
CSF Inox Self-Priming Pump – Type ASH65-4-10/BM.CDPZTH1
Manufacturer: CSF Inox S.p.A. – Montecchio Emilia, Italy
Model: ASH 65-4-10/BM.CDPZTH1
Year: 2017 (newer, used)
Material: Stainless steel AISI 316L
Power: 7.5 kW
Speed: 1450 rpm
Voltage: 400/690 V – 50 Hz
ATEX certification: II 2G c T3 (Zone 1)
Connection: 3″ sanitary fittings
Condition: Very good, unused – stored in original wooden crate
Description:
High-quality stainless steel centrifugal pump from CSF Inox, suitable for use in hygienic and ATEX environments.
The ASH-series pumps are designed for gentle and efficient transfer of liquid food products, beverages, dairy, and chemical solutions.
Nodpfx Aozfhcnjbkjwh
The low-speed 1450 rpm motor provides smooth operation with reduced shear and foaming – ideal for milk, cream, wine, juice, or CIP applications.
The pump housing, impeller, and shaft are made entirely of AISI 316L stainless steel, ensuring long service life and corrosion resistance.
Typical Applications:
Dairy and food processing lines
Beverage, wine, and juice plants
CIP cleaning systems
Chemical and pharmaceutical installations
ATEX classified areas
Status: Ready for immediate delivery
Location: Denmark
Listing
Tönisvorst
1,025 km
Bezel (green)
SPH 650 mm
Call
Condition: excellent (used), Steel headstock
Center height 650 mm
Distance between centers 650 mm
Height from base 1190 mm
The total height can optionally be reduced by 100 mm, and the center height can also be reduced by 100 mm, by removing an intermediate plate.
Further details, see image.
Nodpfx Abogzhbzskswh
Listing
Friesenheim
1,258 km
Plasma cutting machine
ErfiPS990
Call
Condition: new, Plasma cutter Erfi PS990
Manufacturer: Erfi
Njdpfxszgu Rnj Abkjwh
Type: PS990
Plasma cutting machine ERFI PS990 - powerful, single-stage plasma cutter. Up to 20mm clean cut in steel, up to 25mm separating cut. Contact-free ignition by HF-ignition also on paint and rust by pilot arc.
Includes 6m torch, standard filter and integrated pressure reducer with pressure gauge.
The ERFI devices are produced with the utmost care in Germany - that is why ERFI always gives a guarantee of 3 years - without restriction.
Technical data:
Mains voltage 3x400V
Frequency 50Hz
Fuse protection 32A slow-blow
Cutting current 60A level 1/ 90A level 2 Air pressure 6-10bar
Weight 105kg
Available immediately. For collection by the customer. Forklift available. Shipping also possible
Subject to errors and prior sale
We make it easier for you to find: "reduce"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Reduce (2,891)
Search Machineseeker now with more than 200,000 used machines:Browse through the most popular machine descriptions:
This may be of interest to you

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month























































































































































































































