Used Pump 22 Kw 30 Cbm H for sale (87,543)

Condition: used, axle configuration: 3 axles, color: other, Year of construction: 2002, Empty weight: 3.900 kg Lhedju Snbrspfx Ah Esc Axle 1: left 6 mm right 6 mm Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!

Condition: used, axle configuration: 3 axles, first registration: 07/1999, color: other, Year of construction: 2000, Empty weight: 47 kg Axle 1: left 8 mm right 8 mm Axle 2: left 10 mm right 10 mm Lhedpfxew El D Se Ah Esc Axle 3: left8 mm right 8 mm We have the possibility to stack trailers!

Condition: new, Graco Monark 222839 Series H07A Air-Powered Pump with 222791 Air Motor , serial no. according to photo ,unused in original opened box, 100% working Lodpoi Eacljfx Ah Eshc

Condition: refurbished (used), battery capacity: 625 Ah, battery voltage: 80 V, total height: 635 mm, total length: 1,030 mm, total width: 840 mm, Tested forklift battery for your lift truck – 80V 5PZS 625AH – special tray + 1 year warranty + incl. Aquamatik + incl. end connector & REMA 320 plug (other connectors available on request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) Lhedpfxswzvx Se Ah Ejc + Year of manufacture: 2024 Dimensions: Length: 1,030 mm Width: 840 mm Height: 635 mm Weight: approx. 1,540 kg Suitable for the following and other models: Toyota 8FBMT35 Carer Z25HD Carer Z25KN Caterpillar EP30K Caterpillar ЕР30КРАС Daewoo B22/35 X-5 Daewoo B30 Daewoo B35 X Doosan B32X Doosan B35X-5 Hyster E2.50XM Common battery sizes available, feel free to inquire. Transport possible.

Condition: used, machine/vehicle number: 005255, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 110 mm No of Grippers: 7 Lhedpfx Aheg E Tcxo Esc

Condition: used, machine/vehicle number: 007470, Max. panel width: 3800 mm Max. panel length: 2200 mm Lhodpst H Twajfx Ah Eoc Main saw blade projection: 130 mm No of Grippers: 7

Condition: used, machine/vehicle number: 007875, Max. panel width: 3800 mm Max. panel length: 2200 mm Lhjdpfjwkf Axjx Ah Esc Main saw blade projection: 130 mm No of Grippers: 7

Condition: used, Extraction unit previously connected to a Kolbus three knife trimmer. Ljdpfsx Ah N Nex Ah Ejhc

Condition: new, WEG W22 Premium 22 KW02P180M -380 - 415/660//440-460 V 50 Hz 3-phase electric motor, unused in original packaging, 100% functional. Scope of delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Lhjdex Dwibepfx Ah Eec

Condition: ready for operation (used), Nidec FELQ-8PT / VAEA-1A4B22 induction motor SN: 17I084401QK13A with Nachi UVD-11A-A2A2-22-4-6308H pump and VDR-11B-1A2-1A2-U-22 vane pump, used, in good condition, fully functional, scope of delivery as per photos. Lsdpfjx Duclox Ah Eehc

Condition: ready for operation (used), Sincron / Calitax 1055-XEHBA pump with Siemens motor - 0.55 kW / 400V / 1400 RPM / 50 Hz, used, normal signs of wear, 100% functional, delivery as per photos. Lhsdpfx Ahsx Dwbqs Eec

Condition: ready for operation (used), Weber 1117033 04.07 screwdriving unit 438612/KW - Length: 48 cm, used, in good condition, 100% functional, delivery as shown in the photos. Lhjdpfx Ahjx Dxq Hj Ejc

Condition: used, mileage: 435,124 km, power: 380 kW (516.66 HP), first registration: 04/2017, fuel type: diesel, empty load weight: 12,100 kg, maximum load weight: 5,900 kg, overall weight: 40,000 kg, tire size: 315 / 80 R22.5 / 11mm, axle configuration: 4x2, wheelbase: 5,500 mm, next inspection (TÜV): 02/2025, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, total length: 10,420 mm, total width: 25,500 mm, total height: 36,000 mm, front tire size: 315 / 80 R22.5 / 11mm, operation weight: 18,000 kg, Equipment: air conditioning, crane,

Condition: like new (used), Year of construction: 2010, operating hours: 487 h, functionality: fully functional, overall weight: 1,100 kg, volume flow: 358 m³/h, power: 125 kW (169.95 HP), type of cooling: water, rotational speed (max.): 1,500 rpm, Diesel water pump set, Sprinkler unit with few operating hours, in excellent condition for sale. 358m3/h Manufacturer: SISU Type: 420DSJPL Year of manufacture: 1996/ 2010 new turbo freshly serviced Power: 120 kW, 2940 rpm Pump: KSB ETANORM MX125-250 year: 2010 Capacity: 358 m3/h delivery height: 86 meters Power: approx. 180 HP Weight: 1200 kg Lhsdpfxsyi H Eqs Ah Eec self-starting water cooling built on a mobile chassis Operating hours: approx. 473 hours If you need more information, we will help you! Please contact us using the form or call us by phone. Your ad has been automatically translated. Translation errors may occur.

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: HTAT055HE - 2200389046, cooling capacity: 111 kW (150.92 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,536 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 19 m³/h, pump pressure: 1.26 bar, total width: 1,110 mm, total length: 3,415 mm, total height: 2,270 mm, warranty duration: 3 months, Equipment: type plate available, Heat pump, air-cooled chiller Manufacturer: MTA S.p.A. Model: Taurus HTAT 055/HE – 130 / 111 kW The Taurus HTAT 055/HE units are compact heat pumps/chiller sets designed for outdoor installation, including hydronic kit (200 l tank + P15 pump) for low ambient temperatures down to -20°C, equipped with electronic fan speed control (EC fans). Lodpfex Itfcjx Ah Eohc Heating capacity (kW): 130 Heating water outlet/inlet temperature: 45 / 40°C Flow rate (m³/h): 22.5 Available pump pressure (bar): 1.03 Ambient temperature (°C): +7 Cooling capacity (kW): 111 Chilled water outlet/inlet temperature: 7 / 12°C Flow rate (m³/h): 19 Available pump pressure (bar): 1.26 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power input (kW): 60 Max. current (A): 98 Starting current (A): 312 Protection class: IP54 Dimensions: Length (mm): 3,415, Width (mm): 1,110, Height (mm): 2,270 Weight (kg): 1,536 Connection: Rp 2 1/2" Serial No.: 2200389046 Year of manufacture: 2022 Condition: Cosmetic: 2, Technical: OK Used (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 62 kg, input voltage: 400 V, fuel: electricity, warranty duration: 6 months, KARCHER HD 13/18-4SX COLD WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel-braided hose, and adjustable nozzle. An integrated high-pressure hose reel makes it easy to roll up and store. A durable brass head with new ceramic pistons and seals guarantees long, trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 1300 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply: 3 phase - 400 V - 50 Hz Flow rate (l/h): 1300 Operating pressure (bar): 180 Maximum pressure (bar): 275 Connected power (kW): 9.2 Weight (kg): 62 Dimensions (L x W x H) (mm): 560 x 500 x 1090 Hose length (m): 20 Maximum water inlet temperature: 60°C Detergent tank capacity (l): 6 EQUIPMENT: BUILT-IN HOSE REEL NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 20m steel braided pressure hose NEW adjustable nozzle Water filter and GEKa claw couplings - FREE Ljdpfoyit Thox Ah Eshc KEY FEATURES: Open system Oil-based - no operating time limits A built-in chemical tank allows for dispensing cleaning fluid directly through the machine A very clear and intuitive control panel A simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: good (used), Year of construction: 2022, functionality: fully functional, cooling capacity: 512.3 kW (696.53 HP), type of cooling: air, overall weight: 1,386 kg, total width: 2,400 mm, total length: 6,800 mm, total height: 1,570 mm, warranty duration: 6 months, Dry-cooler THERMOKEY GH2390.BZ 2/03 V Q1EEpF(EC)S 512.3 KW Cooling capacity: 512.3 kW (44/37 — +28C) Year of manufacture: 2022 Lodpfx Ahoxyw Dqo Eshc Fluid: Glycol + Water Fluid flow: 67,4 m³/h Air flow: 152415 m³/h Number of fans: 6 pcs. Fan Diameter: 900 mm Volume: 248 dm³ External surface: 1329 m2 Dimensions: 6.8 x 2.4 x 1.57 m. Weight: 1386 kg.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: HFT.130, cooling capacity: 139 kW (188.99 HP), type of input current: three-phase, type of cooling: water, ambient temperature (max.): 40 °C, ambient temperature (min.): -10 °C, input voltage: 400 V, total width: 1,096 mm, total length: 3,355 mm, total height: 2,205 mm, heating capacity: 139 kW (188.99 HP), Hitema International HFT.130 AIR TO WATER REVERSIBLE HEAT PUMP Cooling Capacity: 139kW Heating Capacity: 139kW Ljdpex E S Tyofx Ah Eshc Heat pump with 2 scroll compressors, R410A refrigerant, brazed plate evaporator/condenser, condenser/evaporator coil with copper tubes and aluminum fins, AC axial fans. IP54 protection rating, chillers suitable for outdoor installation Technical data sheet available on request

Condition: good (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 1,055 kW (1,434.40 HP), type of cooling: water, overall weight: 6,300 kg, total width: 1,650 mm, total length: 3,300 mm, total height: 2,300 mm, warranty duration: 6 months, Watercooled chiller TRANE RTHD 300 SE 1055 kW Cooling capacity: 1055 kW / 299.98 tons (12/7 - 30/35°C) Year of manufacture: 2016 Refrigerant circuit: 1 pcs. Heat exchanger: Shell and tube Compressors: 1 pcs. Trane CHHC1D1F0N0 (screw) Type of refrigerant: R134a Dimensions: 3.3x1.65x2.3 m. Weight: 6300 kg. Working hours: 8319 h. Condition: Good Lodpfxoyha Nao Ah Eehc

Condition: used, mileage: 176,000 km, power: 85 kW (115.57 HP), fuel type: diesel, overall weight: 3,000 kg, maximum load weight: 670 kg, first registration: 09/2011, emission class: euro5, number of seats: 3, Equipment: ABS, power assisted steering, For information Lhsdpfx Aeyaqytoh Eec

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: OCTME230 - 2200388958, type of input current: three-phase, cooling capacity: 66.2 kW (90.01 HP), overall weight: 383 kg, input voltage: 400 V, volume flow: 11.4 m³/h, warranty duration: 12 months, type of cooling: water, temperature: 7 °C, total height: 1,200 mm, total length: 1,735 mm, total width: 660 mm, pressure: 10 bar, Equipment: type plate available, Split-Type Chiller, Water-Cooled Chiller Unit Manufacturer: MTA S.p.A. Model: OCEAN Tech OCTME 230 – 66 kW The OCEAN Tech OCTME 230 is a water-cooled chiller unit for indoor installation in split version (without condenser), supplied without hydraulic kit (pump, buffer tank) but including crankcase heater and phase monitoring. Cooling capacity: 66.2 kW Chilled water temperature (outlet/inlet): 7 / 12°C Flow rate: 11.4 m³/h Condensing temperature: 45°C Refrigerant: R 410A Electrical Data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. Power Consumption: 27 kW Max. Current: 45 A Starting Current (circuit): 178 A Protection class: IP22 Lodpfx Ahjxxq U Ts Eohc Dimensions: Length: 1,735 mm, Width: 660 mm, Height: 1,200 mm Weight: 383 kg Chilled water connection: G 2" B Refrigerant connection Ø (mm): 22 / 28 ODF Serial no.: 2200388958 Year of manufacture: 2022 Condition: Visual 1, Technically OK (storage unit, as new) Price: on request (Technical changes and prior sale reserved!)

Condition: as good as new (ex-display), Year of construction: 2024, Machine dimensions: - (L x W x H) 9,350 mm x 2800 mm x 2300 mm, length with filter 5300 mm. Lodpfed N Rfdox Ah Eehc Technical details: - Max. Sheet size: 3,048 x 1,524 Max. - Max. Sheet weight: 200 kg/m² -Laser power (IPG): 6 kW -Travel distance Z - axis: 125 mm -Max. Synchronization speed (X-Y): 141 m/min. -Max. Acceleration (X-Y): 10 m/s² - Positioning accuracy: ±0.05 mm - Repeat accuracy: ±0.05 mm Basic equipment: -Control: Siemens Sinumerik 840 D - Laser head: Precitec light Cutter F 125 Focus - Sheet position detection and measuring system -Positioning laser diode -Automatic plate changer -Automatic nozzle cleaner -Central lubrication unit - Chip tray - Software: Lantek, or Metalix Cad/Cam software with autonesting - Remote control: Remote maintenance Laser cutting options: - Pierceline (piercing settings) -Focusline - Plasmaline -Fastline - Flyline Options include: - Tower with 10 pallet positions - Automatic chip conveyor - Integrated camera (post-production of parts, micro-joints) - Air dryer - Auto. Nozzle Changer (automatic nozzle changer) - Inside camera

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 12,000 W, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 15 mm, power: 12 kW (16.32 HP), warranty duration: 24 months, Equipment: safety light barrier, DURMA HD-FN 3015 fiber laser cutting system: The ideal price-performance solution. The DURMA HD-FN 3015 fiber laser cutting system is the best choice for companies looking for maximum performance and efficiency at an unbeatable price. This state-of-the-art system combines innovative technology with user-friendly operation, offering outstanding benefits for metalworking. Technical specifications Laser power: 12 kW With automatic shuttle table Maximum sheet thickness: Mild steel: 30 mm Stainless steel: 25 mm Aluminum: 30 mm Copper: 15 mm Cutting area: 3060 x 1525 mm Movement axes: X-axis: 3060 mm Y-axis: 1525 mm Z-axis: 125 mm (max. 275 mm) Metal sheets Maximum sheet size: 3048 x 1524 mm Maximum sheet weight: 240 kg/m² Speed and precision: Maximum speed X-axis: 100 m/min Maximum Y-axis speed: 100 m/min Maximum simultaneous speed: 141 m/min Maximum acceleration: 14 m/s² Positioning accuracy: ± 0.05 mm Repeat accuracy: ± 0.05 mm Main features of the system: ・Changing table: Positioned lengthwise for best access to loading and unloading systems. ・Enclosed cutting chamber: Equipped with protective glazing for maximum safety. ・CNC graphic control: With a user-friendly touchscreen for easy operation. ・Laser source: Brilase 12 kW. ・Cutting head: Automatic adjustment of the focus for precise cutting processes. ・Integrated cooling system: Ensures efficient cooling of the cutting head and laser source. ・CAD/CAM software: Enables programming including autonesting for optimum material utilization. ・Positioning laser: Supports the exact positioning of workpieces. ・Sheet metal check system: Automatic detection of the sheet metal position and dimensions for improved process reliability. ・Automatic nozzle cleaning: Ensures continuous cutting quality. ・Central lubrication: For smooth machine maintenance. ・Waste box: For a clean working environment. ・Work area lighting: Ensures good visibility during operation. Ljdpfxju E Tczo Ah Eshc ・Multi-chamber extraction system: Effective removal of smoke and particles. ・Light barrier protection: Ensures safety when changing tables. ・Remote maintenance access: Facilitates remote diagnosis and maintenance.

Condition: new, 2021 Durma 15 kW Fiber Laser Make: DURMA Type: HD-F(L) 3015 Working range X-Y-Z: 3060x1530x160 mm Laser power: 15000 Watt IPG Control: Siemens Sinumerik 840D sheet thickness mild steel: 40 mm Sheet thickness stainless steel: 30 mm Sheet thickness aluminium: 30 mm Sheet size: 3048x1524 mm Loading weight: 200 kg/m² Speeds X-Y axes: 100 m/min. Speeds X-Y axes simultaneous: 280 m/min. positioning accuracy: +/- 0,05 mm Repeating accuracy: +/- 0,05 mm Installation area L/W/H: approx. 14500x7500x2420 mm weight: approx. 12000 kg Standard equipment Automatic pallet changer Control Sinumerik 840D Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Simple user interface parameter page (power-speed-pressure) External CAD/CAM programming software with autonesting optional Lantek software Work area lighting Warning light Multi-chamber exhaust system Special laser cutting options Remote maintenance CE marking IPG fiber laser source 15000 Watt including cooler Lodpfegk Nlpsx Ah Eohc Extended equipment possible: Filter, compact dust collector Vanterm Motorized chip conveyor for small parts/waste Laser Service Set Cloud License Lantek Expert Inside Software Lantek software with positioning - laser diode with automatic sheet metal position detection, measurement Camera Inside Linear drive We will be pleased to send you further information on request.

Condition: as good as new (ex-display), Year of construction: 2024, HD-FS Smart 3015 Fiber X axis: 3100 mm Y axis: 1550 mm Z-axis 125 mm Max. plate dimensions: 3048x1524 mm Max sheet weight: 200 kg/m2 X axis: 100 m/min. Y-axis: 120 m/mm. Synrochnization: 156m/min. Acceleration: 16m/s2 positioning accuracy: + 0,05 mm Reproducibility: +0.05 mm Cutting thickness structural steel: 25 mm stainless steel: 15 mm aluminium: 20 mm Standard equipment Automatic shuttle table Control Sinumerik 840D Auto-Focus cutting head Precitec Procutter F150 focus Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Simple user interface parameters page (performance-speed-pressure) External CAD/CAM programming software with autonesting optional Lantek software Workspace lighting warning light Multi-chamber extraction system Special Laser Cutting Options Lhjdpjft Sbijfx Ah Esc Remote maintenance CE Marking Extended equipment IPG fiber laser source 6000 Watt including cooler Filter, Compact dedusting system Vanterm Laser Service Set Cloud License Lantek Expert Inside Software Lantek Software with positioning - Laser diode with automatic sheet metal position detection, measurement The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information on request.