Used Pulleys for sale (400)

Condition: new, HAW4000 hydraulic winch without valve for wheel loader, excavator, crane, mini excavator, tractor, tractor in viticulture, horticulture, civil engineering and many other applications. HAW4000 hydraulic attached winch can make many applications easier for you. Maximum rope capacity at 4000 kg pull 60 m with 10 mm wire rope. Maximum rope capacity at 3000 kg pulling force 90 m at 8 mm wire rope. Maximum rope capacity at 1700 kg tractive force 150 m with 6 mm wire rope. Maximum rope capacity at 3500 kg tensile force 150 m with 6 mm synthetic rope. Maximum rope capacity at 2000 kg tractive force 220 m with 5 mm plastic rope. Basic equipment 50 m 10 mm wire rope ⦁ In viticulture, agriculture, forestry and horticulture. ⦁ In building construction, civil engineering and road construction. ⦁ Pulling out rootstocks and trees ⦁ As an attachment winch on backhoe cranes and excavators ⦁ As winch for tractors, work machines and grape harvesters A robust steel construction with 3-sided bolt-on option (left, right, rear) with M 16 threaded holes. This allows many possibilities for attaching the winch. Gedpfx Asfn Tvijfnotu (Threads are cut and painted. They must be recut before use due to rust protection). Large lubricatable pulley for long life of the steel cable. ⦁ Maximum working pressure: 210 bar peak. ⦁ Oil flow rate up to 200 l/min short time max.240 l/min. ⦁ Maximum tractive force 4000 kg. ⦁ Rope speed 140 m/min with oil quantity 200 l/min ⦁ Weight: 170 kg ⦁ Color red The winch can be installed in different positions. There is an optional hydraulic brake. Depending on what pulling speeds and pulling forces you need, we can gladly offer you different options. Contact us, we will be happy to advise you. Dimensions: ⦁ Length: 850 mm ⦁ Length with rope inlet 970 mm ⦁ Front width: 200 mm ⦁ Width rear: 300 mm ⦁ Width bearing: + 50 mm ⦁ Width motor: + 300 mm ⦁ Total width: 650 mm ⦁ Height: 420 mm

Condition: new, Hydraulic cable winch HAW1700 with electric valve incl.manual operation and radio remote control for mounting on wood splitter, crane, mini excavator, tractor, stacker, mower crawler and telescopic loader, in viticulture and horticulture, agriculture, construction and forestry and many other applications. With electric hydraulic valve and radio remote control. With the HAW1700 hydraulic winch you can make many tasks easier. Maximum cable capacity 30 m with 6 mm wire rope. Basic equipment 20 m 6 mm wire rope ⦁ Pulling firewood to the log splitter and setting it up ⦁ Pulling logs onto a trailer ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and small excavators ⦁ As a winch for small tractors and narrow-track tractors A robust steel construction with screw-on options on both sides (bottom, back, top) with M 12 thread. This gives you the possibility to use the winch flexibly. Large rope pulley mounted on bearings on both sides for long service life of the wire rope. The standard pulling force is 1700 kg. The winch can be installed in various positions. A hydraulic brake is available as an option. Gtodpfx Afsfn Tvhenou Depending on the pulling speed and pulling force you need, we can offer you different options. Please contact us, we will be pleased to advise you. ⦁ Maximum working pressure: 225 bar peak ⦁ Continuous operating pressure: 175 bar ⦁ Displacement: 400 ccm ⦁ Torque at 225 bar: 870 Nm peak ⦁ Torque in continuous operation 380 Nm ⦁ Maxima [...]

Condition: new, Hydraulic winch for wood splitter, crane, mini excavator, tractor, tractor, viticulture, horticulture and many more applications. With hydraulic mounting winch you can simplify many applications: -Firewood to the wood splitter drag and set up -The logs move trailer -Remove rootstocks and trees -As growing winds at Rueckekraene and small excavators -As a winch for small tractors and narrow track tractors A robust steel construction with 3-sided bolt-on option (left, right, rear) 12 threaded holes, this provides many options to attach the winch (threads are cut and painted. You must cut before using with the taps because of the rust protection). It is a 20 m long and 6 mm strong steel cable mounted. Large pulley for long service life of the steel rope. We attach the hydraulic motors from 50 to 630 CC (default = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar top Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 nm peak Torque in continuous operation: 380 nm Maximum tractive effort: 1700 kg Gedjdf Ufdspfx Afnetu Weight: 49 kg Line speed: 47 m / min for 60 L / min hydraulic oil Color: Red Dimensions: Length: 500 mm Pendant length: 570 mm Front width: 120 mm Rear width: 180 mm Wide storage: + 30 mm Wide engine: + 200 mm Height: 250 mm The winch is there to the

Condition: new, Hydraulic winch for wood splitter, crane, mini excavator, tractor, tractor, viticulture, horticulture and many more applications. With hydraulic winch mounted to help to many applications. Gjdpfjdf Ud Sox Afnotu -Firewood to the wood splitter drag and set up -The logs move trailer -Remove rootstocks and trees -As growing winds at Rueckekraene and small excavators -As a winch for small tractors and narrow track tractors A robust steel construction with 3-sided bolt-on option (left, right, rear) 12 threaded holes, this provides many options to attach the winch (threads are cut and painted. You must cut before using with the taps because of the rust protection). It is a 20 m long and 6 mm strong steel cable mounted. Large pulley for long service life of the steel rope. We attach the hydraulic motors from 50 to 630 CC (default = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar top Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 nm peak Torque in continuous operation: 380 nm Maximum tractive effort: 1700 kg Weight: 49 kg Line speed: 47 m / min for 60 L / min hydraulic oil Color: Red Dimensions: Length: 500 mm Pendulum length: 570 mm Front width: 120 mm Rear width: 180 mm Wide storage: + 30 mm Wide engine:

Condition: new, functionality: fully functional, rope length: 30,000 mm, rope speed: 47,000 mm/min, machine/vehicle number: HAW1700-EV-Funk, Hydraulic winch for log splitter, crane, mini excavator, tractor, viticulture, horticulture and many other applications. With the hydraulic attached winch, you can facilitate many applications: - Pulling firewood to the log splitter and setting it up - Pull logs onto trailers - Pull out rootstocks and trees - As a winch for backhoes and small excavators - As winch for small tractors and narrow track tractors A sturdy steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, this offers many possibilities for mounting the winch (threads are cut and painted.) The winch can also be used as a power winch. They need to be re-tapped with the tap before use because of the rust protection). A 20 m long and 6 mm thick steel cable is mounted. Large pulley for long life of the steel cable. We mount hydraulic motors from 50 to 630 cc (standard = 400 cc). Depending on what speed and traction you need. Gedpedf Ufpofx Afnstu Maximum working pressure: 225 bar peak Continuous working pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum tractive force: 1700 kg Weight: 49 kg Rope speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: length: 500 mm length with pendulum: 570 mm Width front: 120 mm Width rear: 180 mm Width bearing: + 30 mm Width motor: + 200 mm Height: 250 mm The winch is available for mounting or for welding on

Condition: new, Hydraulic cable winch HAW4000 with electric valve for wheel loader, excavator, crane, mini excavator, tractor, tractor in viticulture, horticulture, building construction, civil engineering and many other applications. With the HAW4000 hydraulic mounted cable winch you can make many applications easier. Maximum cable capacity at 4000 kg tractive force 60 m with 10 mm wire rope. Maximum rope capacity at 3000 kg tractive force 90 m with 8 mm wire rope. Maximum rope capacity at 1700 kg traction force 150 m with 6 mm wire rope. Maximum rope capacity with 3500 kg traction force 150 m with 6 mm plastic rope. Maximum rope capacity with 2000 kg traction force 220 m with 5 mm plastic rope. Basic equipment 50 m 10 mm wire rope ⦁ In viticulture, agriculture, forestry and horticulture ⦁ In building construction, civil engineering and road construction ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and excavators Gtedpfxsfn Tvke Afnju ⦁ As a winch for tractors, working machines and grape harvesters A robust steel construction with 3-sided screw-on possibility (left, right, rear) with M 16 threaded holes. This provides many possibilities for fastening the winch. (Threads are cut and painted. They have to be re-cut before use because of the rust protection) Large lubricated pulley for long life of the steel cable. ⦁ Maximum working pressure: 210 bar peak ⦁ Oil flow rate up to 200 l/min short-term max.240 l/min ⦁ Maximum tractive force 4000 kg ⦁ Rope speed 140 m/min with oil quantity 200 l/min ⦁ Weight: 170 kg ⦁ Color [...]

Year of construction: 2015, condition: ready for operation (used), This PROFILATOR VF-320-L was manufactured in 2015. A Modular Gear Machining Center, it features a flexible system for dry machining with multiple process modules tailored to specific needs. Key features include programmable synchronization, modular design, and suitability for dry machining. Ideal for automotive gearbox components and high-precision gear components. If you are looking to get high-quality gear machining capabilities, consider the PROFILATOR VF-320-L machine we have for sale. Contact us for more information. • Machine Type: Modular Gear Machining Center / Multi-Process Gear Production System • Machine Concept: Flexible modular system for dry machining of gears and transmission components. Configurable with multiple process modules according to customer requirements. • Polygon and face slot machining • Gear and spline cutting (rotative cutting, hobbing, front-face gear cutting) • SCUDDING® internal and external gear generation • Gear tooth pointing (rotative and indexing modes) • Chamfering and deburring (ZEM series) • Shifter stop machining for synchronizer sleeves • Free programmable tool/workpiece synchronization • Modular design with different machine sizes • Single or multispindle configurations • Short cycle times • Parallel processes possible • Reduced setup and operating costs • Ergonomic and maintenance-friendly access • Suitable for dry machining Gtodpfox Imuqjx Afnou • Gear quality DIN 5–7 (with SCUDDING®) • Surface roughness Rz 2–3 • High cutting stability and precision • Automotive gearbox components • Synchronizer gears • Shafts and gear wheels • Internal and external splines • Belt pulley profiles • High-precision gear components

Year of construction: 2007, condition: used, 4 pcs. rope pulleys for counter weight of a FB 225 Gtjded Nbkzjpfx Afnju

Year of construction: 1987, condition: used, 4 pcs. rope pulleys for counter weight of a FB 225 Gedpod Ig Uyefx Afnstu

Condition: used, Year of construction: 2012, Overview The Heuft InLine IXs reflexx is an empty bottle inspector for quality control in filling lines. The machine was commissioned in May 2012, is in very good condition and is ready for use at short notice. Technical details  Output: Up to 46,000 bottles/hour Control system: Heuft Synchron TX Network: Heuft Hlan, incl. gateway Licensing: 5 type licenses Equipment: Software wizard for troubleshooting and container changeover Availability: Ready for use at short notice Missing components Thread blow-off (must be added if required) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal in the event of incorrect bottle dimensions Inspection of the bottle base, mouth sealing surface and thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) and residual liquids (oils, paints) using IR technology Rejection of faulty containers or output of a rejection signal Scope of delivery  Spectrum TX conveyor control unit Measuring bridges for inlet control and rejection with height adjustment 2 x Delta K rejection units Air conditioning unit Various spare parts (pulleys, belts) Documentation and training documents (German) Transponder for test bottles Godpfx Afeu Scr Ssnjtu

Condition: like new (used), Clamping length: 240 mm, Body diameter: 110 mm, Pulley diameter: 70 mm. Gtedpfelkchnjx Afneu Total length: 860 mm, Spindle diameter: 40 mm, - 0704D64, HL3/1.

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately available and short-term delivery vehicles, on our website. Sample of the equipment. Full equipment details available on request. Neck (Gooseneck): * Gooseneck with front corners bevelled approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Loading area behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs of external foldable lashing rings (LC 5,000 daN) * 2 pairs of external foldable lashing rings (LC 10,000 daN) * 1 pair of internal foldable lashing rings at the central beam front (LC 10,000 daN) * Cut-outs in the outer frame of the platform for hooking in tensioning straps (LC 2,000 daN) * Grating flooring C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), treadplate flooring over the axles Two-piece Steel Ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections * Hydraulic lift unit, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock automatic via reverse gear and manual activation * Air suspension with lift and lower valve Braking System: * WABCO braking system in compliance with EU regulations with EBS-E (2S2M) Gtjdeyhkrrspfx Afnou Tyres: Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallisation of the complete vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure maximum corrosion protection * Final coating with 2 layers of 2K topcoat, single-coloured in RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver grey Accessories included: * 2-inch king pin * Galvanized steel front wall approx. 400 mm high * Grating in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * Grating in the platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm) * Electric-hydraulic unit at the rear under the platform * Plug-in aluminium side and rear boards on the gooseneck, approx. 2,440 x 400 mm (L x H). Rear galvanized insert stanchions removable. (Body length approx. 2,560 mm) * Electric winch with radio remote control, approx. 5,400 kg lifting capacity, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide roller * Bolted approx. 5 t ring for winch cable loop on the neck without deflection pulley * One galvanized toolbox integrated in the sloped gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * 7 pairs of stanchion sockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the platform * Lift axle on the front axle, controlled by TEBS E depending on actual axle load and current loading status * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear taper approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood floor approx. 30 mm thick Loading area: * Loading area after the gooseneck hydraulically liftable/lowerable, length approx. 2,800 mm, with rear taper approx. 1,000 mm x 8° * 6 pairs of folding outward lashing rings (LC 5,000 daN) * 2 pairs of folding outward lashing rings (LC 10,000 daN) * 1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN) * Cutouts in the external frame of the loading area for attaching tension belts (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over the axles checker plate Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with C40/4 grating (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding in/out ramp sections. Hydraulic lift system, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing gear: * JOST landing gear (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock via reverse gear and manual activation * Air suspension with lift and lower valve Brake system: Gjdsyhkqzspfx Afnjtu * WABCO brake system according to EU regulations with EBS-E (2S2M) Tyres: 235/75 R 17.5 3PMSF – Manufacturer of our choice TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final paint in 2 coats of 2K topcoat, solid color in RAL 3002 Carmine Red in accordance with RAL system 841GL * Rims in silver grey Including accessories: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Grating in the gooseneck taper C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating in rear taper of the loading area C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Non-slip sand paint on the checker plates above kingpin and loading area * Electro-hydraulic unit at the rear under the loading area * On the gooseneck: plug-in aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). The rear galvanized drop-in stakes are removable. (Body length approx. 2,560 mm) * An electric cable winch with radio remote control, approx. 5,400 kg pulling force, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide pulley * Bolted 5 t ring for cable winch deflection on the neck without deflection pulley * One galvanized toolbox integrated in the beveled gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition * 7 pairs comple...

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, power: 389.81 kW (529.99 HP), Mobile shredder DOPPSTADT AK 560 Eco Power Gtodpsw Rz Rqefx Afneu Diesel engine: 530 HP Fine shredding basket (hole size can be agreed) Rear discharge conveyor with magnet roll (magnetic head pulley) Twin drive (separate drives for scraper floor and infeed roller) Hydr. self propelled drive (for moving on site) Radio remote control

Condition: good (used), Year of construction: 1952, Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Safety cage fully enclosed -pneumatic viewing window with finger protection -Pressure force: 35 tons -Protrusion: 190 mm -Stroke rate: 105 strokes/min -Adjustable plunger: 50 mm -Pulley surface 250 x 200 mm -Adjustable stroke: 15-70 mm -Table size: 540 x 310 mm -Protrusion: 180 mm Gedpfxob A Hwhs Afnetu

Condition: used, Lippert belt conveyor GF 12730-750-600 RA2259 Technical data: Conveyor length (NL): 12730 mm Frame width (NB): approx. 750 mm Belt width (GuB): 600 mm Overall height (BH): 105 mm Support feet optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor, R37 DRE80M4/TH/Z Electrical data: 50Hz V380-500, kW 0.75 / S1 Return pulley (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Optionally available: Gtsdorrxdaspfx Afnou Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: new, Year of construction: 2020, Transnorm belt conveyor hinged belt diverter 3000x1120x1000 RA2286 Technical data: Conveyor length (NL): 3000 mm Belt body (NB): 1120 mm Belt width (GuB): 1000 mm Overall height/transfer height (BH): 1050 mm +100 mm adjustment range Minimum transfer height: 500 mm Maximum transfer height: 1600 mm Basic dimensions: 3000x1300 mm Tilt height difference: 1100 mm Conveying speed (v m/s): 1.5 m/s Lifting/lowering speed: 1.8 s /1.2 s Drive: Nord geared motor Electrical data: Conveyor belt motor: 50Hz V380-500, kW 1.5 / S1 Tilting motor: 50Hz V220/400, kW 3.0 / S1 Idler pulley (UR): Ø = 80/120 mm Drive drum (AT): Ø = 82 mm Year of construction: 2020 Gtsdpfx Ajtp Tvwjfneu Optionally available: Frequency converter for stepless speed control Prices net plus ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert belt conveyor ascending belt GF 4920-550-400 RA1606 The Lippert belt conveyor is from 2001 and in a good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT frequency converter to control the speed. Side guides and/or light barriers can be mounted on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures shown of the conveyor system were taken in a logistics center while it was still installed. Technical data: Conveyor length (NL): 4920 mm (leading belt + ascending belt with bend and upper straight) stand width (NB): 550 mm belt width (GuB): 400 mm overall height (BH): 105 mm support feet: optional Conveyor speed (v m/s): adjustable up and down with frequency converter Drive: SEW gearmotor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 131 mm Belt: Type XVT-2128 Year of manufacture: 2001 incline / decline: adjustable Optionally available: Supports Side guides one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. Gjdpfx Aek Abd Njfnjtu With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert belt conveyor ascending belt GF 1995-550-400 RA1656 The Lippert belt conveyor is from 2001 and in a good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT frequency converter to control the speed. Side guides and/or light barriers can be mounted on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures shown of the conveyor system were taken in a logistics center while it was still installed. Technical data: Conveyor length (NL): 1995 mm (leading belt 560mm + ascending belt 1435mm) stand width (NB): 550 mm Belt width (GuB): 400 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor DT80K4/BMG/MM05 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 131 mm Belt: Type HSL-8E Year of manufacture: 2001 Gtsdpfx Aek Abd Tefnsu incline / decline: adjustable Optionally available: Supports Side guides one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2008, Transnorm conveyor belt GF 2600-600-500 RA2237 Technical data: Make: Transnorm Conveyor length (NL): 2600 mm Frame width (NB): 600 mm, 700 mm with motor Belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Support feet: optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor, R17 DT71D4/TH Electrical data: 50Hz V380-500, kW 0.37 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Gtsdpfori Snpox Afnou For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm modular conveyor with combiner conveyor belt GF 2500-1300-1200 RA2230 Merging of two belts into one Technical data: Conveyor length (NL): 2500 mm Frame width (NB): 1300 mm, 1600 mm with motor Belt width (GuB): 1200 mm Overall height (BH): 80 mm, 430 mm with motor at the bottom, approx. 1000 mm with motor at the top Scraper height: 190 mm (without motor) Belt width/height scraper: 180 mm Support feet: optionally available Conveyor speed (v m/s): 1 Drive: SEW geared motor, R17 DT80N4 Electrical data: 50Hz V380-500, kW 0.75 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Godpfx Afsrixi Njnstu Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Lippert belt conveyor GF 4450-750-600 RA2257 Technical data: Gtedporrxc Iofx Afneu Conveyor length (NL): 4450 mm Frame width (NB): approx. 750 mm Belt width (GuB): 600 mm Overall height (BH): 105 mm Support feet optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Return pulley (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Optionally available: Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Godpfxsmqty Ue Afnjtu Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Lippert belt conveyor GF 8000-750-600 RA2254 Technical data: Conveyor length (NL): 8000 mm Frame width (NB): approx. 750 mm Belt width (GuB): 600 mm Overall height (BH): 105 mm Support feet optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor Gjdpfx Afjrrxcyjnetu Electrical data: 50Hz V380-500, kW 0.55 / S1 Return pulley (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Optionally available: Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: new, Year of construction: 2021, Lippert belt conveyor folding belt vertical switch diverter, distribution on 2 levels GF 3700-920-800 - NEW RA1985 Technical data: Conveyor length (NL): 1900 mm Belt body (NB): 920 mm Belt width (GuB): 800 mm Overall height (BH): 105 mm Belt height: 550 mm Basic dimensions: 3700x1500 mm, safety fence Total height: 2700 mm Tilt height difference: 900 mm Conveying speed (v m/s): 0.8m/s Lifting/lowering speed: 1s Drive: SEW geared motor with Movi-mot Electrical data: Conveyor belt motor: 50Hz V380-500, kW 0.55 / S1 Tilt motor: 50Hz V220/400, kW 1.1 / S1 Idler pulley (UR): Ø = 82 mm Drive drum (AT): Ø = 82 mm Year of construction: 2020 Prices net plus ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. Gedpfstwgk Asx Afnetu We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics