Used Puller for sale (113)

Condition: good (used), Prism winder driven Schmidt OF with 5 pullers Hedefwtayepfx Aacenu L: 8,3m W: 70cm H: 40-70cm Please also visit my other advertisements. I look forward to your inquiry.

Condition: excellent (used), Year of construction: 2016, HAITIAN MARS II MA10000/6800 Universal ServoDrive (2016) only 17.000 hours in automatic cycle! Main Technical Parameters: Clamping force: 10,000 kN Hnsdpfx Aaewtgltjceu Opening stroke: 1220 mm Minimum mould height: 500 mm Maximum mould height: 1160 mm Daylight between platens: 2380 mm Distance between tie bars: 1160 x 1160 mm Clamping platen size: 1650 x 1700 mm Screw diameter: 90 mm L/D ratio: 24.4 mm/mm Shot volume: 2721 ccm Shot weight (PE): 1986 g Injection rate: 544 g/s Max injection pressure: 2280 bar Machine dimensions: 12.5 x 2.49 x 2.75 m Machine weight: 50.000 kg Equipment and Features: 423 – Proportional valve for injection (Rexroth) S01 – 8x hydraulic core pullers (4x fixed platen, 4x moving platen) with servo motor 432 – 8x core relief 662E – 16x integrated hot runners 623 – Acoustic alarm 237C – Safety locking force sensor 430C – 8x pneumatic cascade control Barrel and screw designed for processing 30% glass-filled materials 419A – Parallel movement: opening/ejector or opening/core 667 – 6x freely programmable inputs/outputs Flow meter with 6 tubes + hoses + cable trays + valves + filters + nozzles + labor, all per Lamky specification (Stäubli quick couplings) Total sockets: 4x230V/16A, 2x400V/16A, 4x400V/32A Centering ring diameter (fixed and moving side): 250 mm 8x pressure gauges for core puller circuits 409A – 8x pneumatic valves (8 mm, 3/2), 4x fixed, 4x moving side E65 – Interface for temperature controller (4 zones) 236 – Automatic ejector bar retraction (operator side)

Year of construction: 1996, condition: good (used), Weinig Unimat 23 four-side planer - German production - grooved top - year of production 1996 - pulling rollers in the table top TECHNICAL PARAMETERS: planed width 230 mm planing height 160 mm grooved top spindle diameter 40 mm 1 lower spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 11 kW 5 lower spindle 7.5 kW feed smoothly adjustable 6-36 m / min 5.5 kW feed motor power six top steel pulling rollers Hodpjh Dwl Djfx Aacjnu two upper rubber pulling rollers three pullers in the table top pneumatic feed pressure pneumatic shoe clamp spindles with brakes pre-table length 1970 mm electric height adjustment central lubrication (split) diameter of nozzles 140 mm dimensions of the machine (length / width / height) 410/200/180 cm weight ~ 3000 kg

Condition: used, dia. of draw-in collets 4 - 24 mm max. radius to grind 12 mm grinding range 4 - 24 mm grinding wheel-diameter 100 mm total power requirement 0,4 kW weight of the machine ca. 100 kg dimensions of the machine ca. 1 x 0,6 x 0,4 m Hnedov Dxzpjpfx Aacju Machine has 19 clamping devices 4-14 mm, 12 pieces of grinding wheels 100 mm, puller for grinding wheel. Machine dealer with own stock of 1600 m².

Year of construction: 2024, condition: new, MRB-S Series Technical data (see pictures) Standard equipment CE Conical bend Motorized back roller Additional control panel for upper and lower rollers which are operated with landing gear. SAE 1050 steel rollers Induction hardened rollers, Relaxed steel construction, at 2.5 and 3m Machine supports, brake system for precise bends, Digital display. Motorized back roller with puller Optional equipment Motorised under-roller mounting, ground rollers Hsdpfsfin E Djx Aaconu Extended rolls for profile bends, Special rollers for profile bending, Special packaging for international deliveries. MRB series: Technical data (see pictures) Standard equipment CE standard Digital display Conical bend Motorized back roller with tightening Additional control panel for upper and lower rollers, which are operated with landing gear. operated by landing gear. SAE 1050 steel rollers, Induction hardened rollers, Relaxed steel construction, Braking system for precise bends. Optional equipment Motorized bottom roller with suit, stone rollers Extended rolls for profile bends, special rollers for profile bending, Special packaging for international Programmes Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Durma Maschinen GmbH is part of the internationally successful Durmazlar Group, which exports new, high-quality sheet metal working machines all over the world and is headquartered in Türk

Condition: excellent (used), Year of construction: 2012, operating hours: 66,265 h, BATTENFELD EcoPower 110/350 (year of construction 2012) (110t) Electric, high speed, energy-saving. Control system: UNILOG B6 - touchscreen Operating hours: 66,265 Screw diameter: 35 mm Shot weight: 153 gr/hp Injection pressure: 2083 bar Shot volume: 168 ccm Closing force: 110 t Hnedpfownz Eqox Aaceu Distance between tie bars: 470×420 mm Max. Size of mold platens: 690×663 mm Ejector: hydraulic Toggle lever Robot interface Europe 67 Air valve x 1 Hydraulic core puller x 1 Hardened injection unit - bimetal Parallel movements Centralized lubrication Heating capacity: 10.4 kW Dimensions: Length / width / height: 4.50×1.50×2.10 m Weight: 4800 kg Machine is free! Subject to alterations, prior sale and errors excepted!

Year of construction: 1988, condition: excellent (used), New entry Hsdpfsk Ufz Nsx Aacsnu hydraulic surface grinding machine Z&B Ziersch FS 2045 T Bj.88 grinding area 500 x 200 mm - vertical dividing gear - my-Tipp- feed - electronic handwheel - autom. feed - digitalaz. automatic cross feed, continuous and intermittent, micro-fine adjustment cross - magnetic plate with demagnetization hydr. overhead puller - adjustable feet - machine checked through - all functions there - runs very nice ! Pricing; ex stock - subject to prior sale and error.

Condition: used, Year of construction: 2001, Clamping force: 350 t Platten dimensions: 1040 x 950 mm Distance between tie bars: 710 x 630 mm Screw diameter: 50 mm Shot weight: 400 g Hnedpfx Ajva Ht Ssacou Shot volume: 442 cm3 -2 core pullers -2 air valves, controllable hot runners: 1-16 chanel -1 kaskade Type: Horizontal Drive: Hydraulic

Condition: new, Bernardo surface grinding machine BSG 2040 PLC Technical specifications Table clamping surface 200 x 500 mm T-slots number / width 1 / 14 mm Electro-magnetic clamping plate 200 x 460 mm Max. Travel, longitudinal 560 mm Max. travel travel, crosswise 240 mm Distance spindle center / table max. 450 mm Max. workpiece weight workpiece weight* 180 kg Grinding wheel 200 x 20 x 31,75 mm Table speed, hydraulic 7 - 25 m/min Cross adjustment Automatic feed, transverse 0.1 - 8 mm / stroke Rapid feed, cross 990 mm/min Cross feed per handwheel rotation 4 mm/rev. Hodpfx Aogd Ia Soacsnu Graduation on handwheel 0.02 mm Vertical infeed Automatic feed, vertical 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm Rapid feed, vertical 480 mm/min Vertical infeed per handwheel revolution 2 mm/rev. Scale division on handwheel 0.005 mm Grinding spindle motor 2.2 kW Spindle speed 2850 rpm Hydraulic pump motor 0,75 kW Vertical feed motor 0,5 kW Length 2160 mm depth 1650 mm height 1840 mm Weight approx. 1640 kg * with magnetic clamping plate Scope of delivery - 2-axis digital display ES-12 H with LCD display - Siemens SMART panel IE V3 with touch operation - Electronic handwheel - grinding wheel - Wheel flange - LED work light - Magnetic clamping plate - Balancing stand - Balancing shaft Protective covers - Parallel puller - Demagnetizing device - Coolant device - Extraction diamond - Machine shoes - Central lubrication - operating tool

Condition: good (used), Year of construction: 2008, ø 200-630 mm 7.5 kW single servo drives Hnjdpfxju N Hbrs Aaceu

Condition: used, Year of construction: 2000, 4-caterpillar haul-off for pipes from D=63mm to D=315mm Hnedpfxovzrmae Aaceu

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, -Rabaud pile driver, Vibroscopic Professionnel MP 35/95 for attachment to excavators Vibrating impact hammer Impact bell: 150 mm Support mast for the hammer with pulling cylinder -Mounting plate for Lehnhoff quick coupler Model SW08 with bolted plate RAL 9005 Satin -Adapter sleeve for square piles Pile size 140 x 140 mm Hnedpfstv E Afsx Aacsu - Pre-drilled rod 60 mm The pile driver was only used by us to build a willow

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 250 – 1900 C1 Injection Moulding Machine Year of manufacture: 2007 Control system: MC4 Operating hours: only 8,900! Clamping unit: Clamping force: 2,500 kN Maximum mould opening force: 160 kN Moving platen force – opening: 86 kN Moving platen force – closing: 68 kN Mould platen dimensions (H × L): 995 × 1,050 mm Tie-bar clearance (H × W): 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1,150 mm Ejector stroke (hydraulic): 200 mm Ejector force (forward/backward): 58 / 28 kN Injection unit: Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Shot weight (for PS): 953 g Injection rate: 400 cm³/s Screw speed (standard/option): 218 / 306 rpm Maximum plasticizing rate: 75 g/s Nozzle contact force: 110 kN Electro-hydraulic equipment: Pump motor power: 55 kW Installed heating power: 30 kW Number of barrel heating zones: 6 Hydraulic oil tank capacity: 720 l Dimensions and weight: Machine dimensions (L × W × H): approx. 6.21 × 2.04 × 2.39 m Total weight: 14,500 kg Maximum mould weight: 3,430 kg Hnsdpfx Ajw A N Hfeacou Accessories and additional equipment: - Oil tank - Anti-vibration pads - 3 × core pullers - 8 × hot runner control zones - 2 × air valves - Robot interface according to Euromap 67 Additional information: - Machine located in Poland - Immediately available - Loading, transport, installation, and commissioning can be organized

Condition: used, Year of construction: 1998, Clamping force: 60 t Screw diameter: 30 mm Shot weight: 96 g Distance between tie bars V: 520 mm Distance between tie bars H: 520 mm Shot volume: 106 cm3 1 x core puller Hnodpfjvurhqjx Aacou Type: Horizontal Drive: Hydraulic

Condition: new, Year of construction: 2025, New MW2000 / NX-5 model with 360° hydraulic rotator. Self-propelled pile driver for PV farm posts by Mazaka, 9.15 m mast, DEUTZ 85 kW engine! MAZAKA MW2000 / NX-5 • Engine – DEUTZ, Stage V emissions standard • Engine power: 85 kW • Noise level: 109 dBA • Steel tracks HAMMER • Model: MZK65, 1650 Joules • Impact rate: 350-700 blows/min • Oil flow: 70-100 L • Hammer weight: 750 kg HYDRAULIC SYSTEM • Oil tank: 200 L • Oil flow rate: 50-100 L/min • Oil pressure: 225 bar • Fuel tank: 120 L UNDERCARRIAGE SYSTEM • Speed 1: 2 km/h, speed 2: 4.4 km/h MAX. POST HEIGHT • Post height: 9,150 mm • Side shift: 100 - 100 mm • Pile cap: 145 x 95 mm included in the machine price (other sizes available at extra cost) TRANSPORT DIMENSIONS • Height: 2,280 mm Hodpfx Aow Rvlvoaconu • Width: 2,280 mm • Length: 3,600 mm • Weight: 7,950 kg • Ground clearance: 500 mm • Mast tilt: +20° / -150° • Side tilt: +15° / -15° 360° ROTATOR • Rotation speed: 0 - 5 rpm • Hydraulic rotator system Net retail price including transport: €215,000.00 Optional equipment (at extra charge): • Automatic levelling system – €4,400 net • Post puller – €2,200.00 net • Rock, concrete, and asphalt auger complete with 203 mm / 6-inch bit and DTH mounting bracket – €18,500 net

Condition: used, Gebr. Bayer GB-2680N - Industrial bench grinder with drill grinding device - Drill grinding device - Diamond puller - Cooling water pump - Machine light Hnsdovb Hgzepfx Aacsu Technical data - Grinding wheel Ø: 210 / 280 mm - Grinding wheel width: 40 mm - Speed: 1450 rpm - Motor power: 1.5 kW - Dimensions WxHxD: approx. 1450 x 1600 x 1300 mm - Weight: approx. 300 kg

Condition: good (used), Year of construction: 2000, IPM 6-belt pipe puller TR 400/6 up to D=400mm Hodpfevzrcusx Aaconu

Condition: used, Schulz hydraulic portal press type H26 buy used Machine data: Hodpovxtrxofx Aacjnu max. pressure 1500 kN (150 tons) Main motor 55kW Cooling system motor 3kW Rexroth hydraulic system Tool plate dimensions 850x760 mm

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, For sale is a fully functional and highly precise GILDEMEISTER CTX 200 CNC lathe, manufactured in 1995. This machine is renowned for its high repeatability, speed, and accuracy, making it ideal for automatic turning operations. It is sold with a comprehensive set of tooling, allowing for immediate commencement of work. Machine Data: ● Model: GILDEMEISTER CTX 200 ● Year of Manufacture: 1995 ● Condition: Fully functional, very accurate, repeatable, and fast ● Maximum Turning Diameter: 210 mm ● Maximum Turning Length: 350 mm ● X-axis Travel: 160 mm ● Tool Magazine Capacity: 12 pcs. ● Minimum Spindle Speed: 25 rpm ● Maximum Spindle Speed: 5000 rpm ● Spindle Bore: 42 mm ● Tool Holder Type: VDI 20 ● Control Language: English ● Operating Hours: 79,000 h ● Additional Equipment: Chip conveyor Included with the Lathe: Full Tooling Package: ● VDI20 tool holders ● External turning tools ● Boring bars ● Compensating tap holder for threading ● Large quantities of taps, drills, dies ● Numerous packs of interchangeable inserts (for every tool type) ● 3x modular drills ● Bar puller (for automatic operation) ● Set of soft jaws for the chuck ● Complete set of ER25 and ER32 collets from ø2 to ø15 Purchase Information: Hodpfx Aaowm Hh Ujcenu ● Transportation and loading: Buyer's responsibility ● Reason for Sale: Business closure

Condition: excellent (used), Year of construction: 2012, Clamping Unit • Clamping Force: 50 Ton • Opening Force (max): 40 kN/mm • Mould Height (fixed/variable min): 200 mm • Platen Daylight (fixed/variable max): 450-550 mm • Weight of Movable Mould Half (max): 230 kg • Ejector Force/Stroke (max): 30 kN / 70 mm Injection Unit (100) • Screw Diameter: 20 mm • Effective Screw Length (L/D): 25 • Injection Volume: 31 cm³ • Shot Weight: 29 g (PS) Machine Specifications • Weight of Machine: 3,049 kg Hnedpfx Aajvtn Nbjcju • Transport Dimensions: 2.7 m x 1.5 m x 2.2 m • Transport Weight: 3.6 tons Safety • Barrier: Optical barrier only (no mechanical barrier). 2x hydraulic core puller

Condition: new, functionality: fully functional, Year of construction: 2025, Brand new self-propelled pile driver for solar panels by Mazaka. The model has been designed in a compact housing – ideal for transport and intensive work. The brand is recognized by professionals on the EU, US, and Canadian markets. MAZAKA Self-Propelled Pile Driver MW1200 CW Engine Brand: YANMAR TIER 5, 35.4 kW, Model: 4TNV88C-YDEH2 / EU Stage V Noise level: 108 dB Hammer Model: MZKK65 1450 Joules Number of blows: 350–700 bpm Weight: 750 kg HYDRAULIC SYSTEM Oil tank: 150 L Oil flow: 50–100 L Pressure: 180 bar Fuel tank: 50 L MACHINE SPEED Travel speed: 2.2 – 4 km/h PANEL HEIGHT Max. panel height: 6100 mm Side shift 1 pile driver head template (other profiles available at extra charge, quoted upon request): 125–125 mm / 100–60 mm DIMENSIONS Height: 2770 mm Width: 2290 mm Length: 3660 mm Weight: 4750 kg Column tilt: +10° to -63° Side tilt: +10° to -10° FUEL CONSUMPTION Diesel: 2.5–3.5 l/h Net retail price with transport: €101,000 (net) Optional equipment (at extra charge): • Automatic levelling system – €4,100 (net) • Post puller – €2,000 (net) • Additional pile head template according to buyer’s technical drawing – €1,600 (net) • Rock, concrete, asphalt auger, including 203 mm bit and DTH 6'' mounting bracket (drilling depth approx. 1,650 mm in 5–10 minutes). Price: €16,000 (net). Please note: for rock drilling, a 14 bar / 14 m³ compressor is required. Hjdpfxow Rvine Aacsnu • Auger for soft ground (150 x 1500 mm or 200 x 1500 mm) with rotary head, complete set – €4,500 (net)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical Data Product number M400-4 Manufacturing year 2009 Height of passage 150 mm Passage width 320 mm Plastic Stainless steel and plastic approved for food contact Power 1.5 kW Power 400 V / 50 Hz Air pressure 8 bar Length 1420 mm Width 650 mm Height 1720 mm Weight 220 kg Machine in perfect condition very little used M400-4 meat tenderizer Josef Koch AG presents the latest evolution in the Pökomat range. The new Steaker is based on the proven and reliable Pökomat technology. It is an efficient and user-friendly solution for the meat industry that meets the demand for softening automatically portioned meat. This machine combines high performance with operation and maintenance. Key features of the M400-4: 396 or 536 precision-sharpened, robust stainless steel knives Two easily replaceable knife supports 10 pneumatically adjustable clamping and pulling units very gentle product processing polyurethane belt-puller removable without tools intelligent clamping system Hedpfxsvimfts Aacsnu easy cleaning, hinged carrying system mobile on two polyurethane wheels frequency controlled processing speed holder for storing and changing knives

Condition: good (used), Year of construction: 2008, GRAEWE 6-belt pipe puller BA500-6 up to D=500 mm Hodevzratopfx Aacsnu

Condition: used, Year of construction: 2001, Clamping force: 250 t Hnedovbbvkjpfx Aacsu Screw diameter: 70 mm Distance between tie bars V: 630 mm Distance between tie bars H: 630 mm Core pullers: 2x Air valve: 1x Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Year of construction: 2015, SERVO machine Hnodjvf Hvkjpfx Aacju Clamping force: 350 ton Max opening: 730 mm Min. mold height: 350 mm Max. mold height: 745 mm Plates dimensions: 1040 x 1060 mm Distance between tie bars: 720 x 720 mm Screw diameter: 70 mm Injection pressure: 1877 bar Injection volume: 1212 cm³ Shot weight: 1103 g Machine has only: 27,000 hours! 2 x core pullers on moving platten 12 x hot runners New screw in 2017 30% glass