Used Profile Machining Centre for sale (67,904)

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, working width: 205 mm, working height: 60 mm, Spraying machine for profiles / Automatic spraying machine for moldings Manufacturer: Falcioni Type: Flexispray Year of manufacture: 2005 Linear continuous spraying machine for the automatic coating of profile moldings, frame moldings, profile boards, and baseboards, with a spray booth, belt conveyor, and programmable gun control. Typical applications: Molding production, frame and picture frame manufacturing, profile wood and panel production, contract coating. Intended coating materials according to the manufacturer: - UV stains and water-based stains - Water-based paints applied by spraying - UV paints Workpiece dimensions: Max. working width 205 mm Max. workpiece height 60 mm Minimum workpiece length 400 – 800 mm Feed: Feed speed 20 – 120 m/min Conveyor drive 0.75 kW, inverter-controlled Extraction: Exhaust fan 0.55 kW Exhaust capacity 5000 m³/h Compressed air: Operating pressure for gun control 4 – 5 bar Compressed air consumption 1200 Nl/min Electrical system: Guodpfxo Adrrzo Acgoi Installed total power 1.6 kW Machine weight approx. 600 kg Equipment: - 3 spray guns - without material pump Basic concept: - Spray booth with large-area glazing - Rubber-coated conveyor belts at the infeed and outfeed, roller conveyor in the spraying zone - Gun activation via workpiece detection with a pressure roller and microswitch - Electronic control system VT 50 for programming gun height and on/off points for each gun, display of belt speed, meters produced, and quantity - Overspray recovery via collection trays and collection tanks - Dry filter system for exhaust air purification - Operation by one person Note: The technical specifications have been taken from the manufacturer's operating manual and may differ from the actual design of the machine.

Condition: used, Year of construction: 2023, Felder Format 4 Profit H80 21.31 Machining Centre. Serial No TBA (2023), F4 Integrate Control, Working Area 3090 x 2100 x 85mm, Travel X/Y/Z = 3860/3500/225mm, 500m3/h Vacuum Table, Main Spindle 10kW, HSK F63 at 1000 – 24000rpm, 15 Position Toolchanger, Length Measurement Tool, Hand Held Remote Control, Loading/Unloading Tables, Upper Table Extraction, Light Guards Location: This lot is located in Gateshead, Tyne & Wear, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Guodpfxo Ah Etyj Acgoi Lot 1 of Auction 3516

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 016-018828-450, SPECIFICATION Table 914mm x 500mm X axis traverse 830mm Y axis traverse 530mm Z axis traverse 580mm Spindle nose to table 115-695mm Spindle BT40 Spindle speeds 0-10,000rpm Spindle motor 22.4kW Rapid feed rate 30m/min Toolchanger capacity 30 tools Approximate weight 5800Kg Gedpfx Acoxzqq Tegjui   MACHINE EQUIPPED WITH: - Siemens 828D CNC Control Renishaw probe 15 0ff BT40 toolholders Coolant system Lighting Guarding

Condition: used, Weinig Rondamat 929 knife grinding machine for the manufacture of profiled knives for woodworking. Production from a straight blank or regrinding of used knives using a template. Includes a new grinding wheel and a new cooling lubricant pump. Technical data: Godpe Ahm Ixjfx Acgeui - Clamping length: 230 mm - Mandrel ⌀: 40 mm

Condition: used, Year of construction: 2000, Working width: 230 mm Working height: 130 mm Guedpfxo Ai Em Ts Acgoi Number of working spindles: 4 Spindle arrangement: bottom, right, left, top, top, bottom Motor power, bottom spindle: 5.5 kW Motor power, right spindle: 5.5 kW Motor power, left spindle: 5.5 kW Motor power, top spindle: 5.5 kW Adjustment, right spindle: hand crank Adjustment, left spindle: hand crank Adjustment, top spindle: hand crank Planing heads: Tersa Feed rate: infinitely variable Feed roller pressure: mechanical Current consumption: 45A Power consumption: Motor brake: automatic Dust extraction port: Machine length: 4000 Machine width: 1700 Weight: 1500

Condition: used, Year of construction: 2020, 5-axis CNC machining center Manufacturer: Houfek Type: Scorpion CE21RA Year of manufacture: 2020 Technical data - Workpiece size: 3200x2100x150 mm Guodpfx Ae Aiubdecgsi - Travel ranges X / Y / Z: 3900 / 2750 / 350 mm - Rapid traverse X / Y / Z: 70 / 70 / 35 m/min - Spindle: HSD ES 779 L 6P, 22 kW, max. 24,000 rpm HSK A63 - Drilling unit: 36 drilling spindles, grid 32 mm, stroke 70 mm, 1.7 kW (3 pcs.), drill chuck D = 10 mm (side screws) - Chain tool changer: 60 tools, max. length 180 mm, max. 100 mm, max. 3 kg, servo motor - Disc tool changer: 21 tools, max. length 150 mm, max. 150 mm, max. 5 kg, servo motor (additional controlled axis) - Vacuum table: Grid table (nesting), 8 zones, controlled via the control panel - Additional connections: pneumatic 4x pairs 6 mm (external clamping elements), vacuum 4x pairs 12 mm (templates, fixtures) - Machine accuracy: 0.1 mm / 1000 mm - Repeatability: 0.05 mm - Flatness and squareness X, Y, Z: 0.1 mm / 1000 mm - Electrical connection: 3/N/PE 400 V, 50 Hz, rated current 117 A, control voltage 24 V DC, IP 54 - Compressed air: min. 7 bar, approx. 300 l/min Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 175118, operating hours: 3,203 h, spindle speed (max.): 12,000 rpm, Mazak FJV-200 (2005) Serial Number: 175118 Through Coolant Gjdjv Txpljpfx Acgoui BT40 Tooling Mazatrol 640M control 30 Tool magazine 12,000 rpm main spindle full set of manuals This item is physically in stock and can be seen in full working order, at our showroom. Delivery and installation can be arranged at extra costs.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, - The machine was purchased new in 1988 and has been in our possession ever since. - The visual condition can be seen in the photos. Considering its age and the existing paint condition, the mechanical condition is satisfactory. - The machine is operational and can be demonstrated by prior arrangement. - The machine has been technically modified. This provides a second, higher speed for processing smaller pipe dimensions. - A protective frame has been manufactured to protect the machine, which helps to minimize external damage. The protective frame also has two mounts that can be used to prepare or mount various profiles. - The control panel has been expanded. As a result, up to 10 set values can now be pre-programmed. - The existing standard tools are included with the machine. All arbor diameters are 60 mm. - The original operating manual is available. - The scope of delivery includes a comprehensive selection of tools for various applications, including: Round tubes Flat bars for heavy and light arbors Square profiles Gsdpfx Aoz Hcp Njcgsui Rectangular tubes T-profiles Angle irons Diagonal tools - A total of 15 pallets of tools belong to the machine (see photos and description). - The machine will only be sold together with the complete set of tools. - The price is ex works. The dismantling, loading, and collection of the machine must be carried out by the buyer himself or by a commissioned forwarding agent. Technical specifications according to available documentation. Subject to prior sale.

Condition: used, Year of construction: 2020, Vertical CNC machining center Manufacturer: Homag Type: Optimat BHX055 Year of manufacture: 2020 Godpj Aiubhofx Acgsui Technical specifications Workpiece length: 200 - 3,050 mm Workpiece width: 70 - 850 mm Workpiece thickness: 12 - 60 mm Milling spindle: 1 Main spindle power: 5 kW Max. speed: 18,000-24,000 rpm (depending on configuration) Tool holder: HSK-F63 or ETP25 Tool changer: 4-position magazine Vertical drilling spindles: 13 Horizontal drilling spindles X: 4 Horizontal drilling spindles Y: 2 Dado saw: X-axis Control system: Homag powerTouch / Power Control PC 86 Software: WOODWOP 7.x Total connected load: 11.5 kW Compressed air requirement: 7 bar Machine weight: approx. 1,580 kg Installation dimensions (L x W x H): approx. 2,950 x 1,984 x 1,895 mm CE marking Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1125318, controller manufacturer: Haas, spindle speed (max.): 8,100 rpm, number of slots in tool magazine: 20, SPECIFICATION Travel X axis stroke 762mm Y axis stroke 406mm Z axis stroke 508mm Distance spindle nose to table 102-610mm Table Width 536mm Length 914mm Max. Weight on table 1361kg T Slots: width 16mm : pitch 125mm   SPECIFICATION Cont’d Spindle Taper size No.40 Speed 0-8100rpm Godpfx Aowx I N Decgoui Bearings Bearing lubrication Air/oil injection Cooling Liquid cooled Motor Spindle motor, max. rating 22.4kW Feedrate Rapid X, Y & Z axis 25.4m/min Max. Cutting feedrate 16.5m/min Toolchanger Capacity 20 tools Type BT40 General Approximate machine weight 3750kg Air supply (min) 113lpm, 6.9 bar MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control system Programmable coolant nozzle Automatic lubrication system Enclosed guarding Swarf auger

Condition: excellent (used), Year of construction: 2019, operating hours: 5,277 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, workpiece weight (max.): 300 kg, table width: 500 mm, table length: 630 mm, overall weight: 8,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,400 W, spindle nose: CT 40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, CNC Machining Centre HAAS UMC 750 SS TECHNICAL CHARACTERISTICS: Year of manufacturing: 2019 Number of simultaneous axes: 5 Stroke X axis: 762 [mm] Stroke Y axis: 508 [mm] Stroke Z axis: 508 [mm] Angular C axis stroke: 360 [°] Table dimensions : Ø630 x 500 [mm] Max. load on table: 300 [Kg] B axis swivelling stroke: +110 [°] / 350 [°] Spindle type: CT 40 Max. spindle speed: 15000 [rpm] Gjdpfe Afwinsx Acgeui Spindle power: 22.4 [kW] Tool changer magazin number of stations: 40 Lubrication tank capacity: 284 [l] Number of running hours: 5277 [h] Weight: 8500 [Kg] EQUIPMENT INCLUDED: x1 spindle 15000 [rpm] x1 through-spindle coolant x1 high-pressure coolant pump 21 bar x1 auxiliary coolant filter x1 RENISHAW wireless workpiece probe x1 calibration sphere x1 RENISHAW tool probe x1 HAAS oil mist extractor x1 HAAS remote handwheel x1 HENNIG chip conveyor, type 101435 Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, as well as milling, drilling and tapping machines, and CNC grinding machines

Condition: like new (used), functionality: fully functional, Year of construction: 2025, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller diameter: 118 mm, overall weight: 220 kg, power: 0.75 kW (1.02 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, hardened rollers, NEW!!! LFSS PK 30 Profile bending machine, pipe bender 30mm /ct2275/ Gujdsxh D Nvopfx Acgei Manufacturer: LFSS Type: PK30 Year of manufacture: 2025 Horizontal and vertical operation Rollers: 2 driven Upper roller up-down movement manually Max. shaft diameter: 30 mm Working speed: 4 m/min Bending capacity: - Flat steel: 50 x 10 mm - Square 35 mm - Closed section: 40x 40 mm - Pipe 48 x 3 mm Power: 400 V / 0.75 kW 50Hz Electric foot switch with emergency stop Standard bending set Weight: approx. 200 kg CE certification Instructions in German or English Dimensions: W 700 x H 1450 x D:750 mm

Condition: used, Year of construction: 1994, spindle diameter: 50 mm, spindle speed (min.): 6,000 rpm, We offer a used WEINIG Univar 10/2 profiling and rabbeting machine, primarily designed for rabbeting windows, doors, and similar profiles. The machine is equipped with two hydraulically controlled, right-hand precision spindles that can be raised and lowered, allowing for the clamping of three sets of tools on top of each other. The lifting mechanism uses a U-shaped motion, enabling the machining of short workpieces. The individual tool positions can be finely adjusted in the radial direction. Gujdpfx Aco Aguv Eogji To ensure high-quality machining without material tear-out, the first spindle allows the selection of either a left-hand or right-hand rotation direction. It is equipped with a mechanical brake for changing the direction of rotation. During the machining of the last 100 mm of each frame end, the spindle plunges into the wood with the corresponding matching tool, thereby reducing material tear-out in the corners of the frame. The construction also includes an additional support rail for large-format frames. Technical equipment and functions: * 2 hydraulically controlled, right-hand precision spindles that can be raised and lowered * Ability to clamp 3 sets of tools on top of each other * U-shaped lifting mechanism for machining short workpieces * Fine radial adjustment of individual tool positions * Central lubrication of spindle units * Selection of left-hand and right-hand rotation for the first spindle * Mechanical brake for changing the direction of rotation * Additional support rail for large-format frames * Continuous, chainless feed using rubber-coated rollers with a very short pitch * Height adjustment of the feed beam using a ratchet * Program control with a selector switch for a single program * Automatic change of stroke for two workpieces in the tenon-rabbet section * Ability to program up to 4 workpieces, or 4 sides, for longitudinal profiling and rabbeting The machine does not include machining tools.

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 1841, functionality: fully functional, operating hours: 1,850 h, input voltage: 400 V, input frequency: 50 Hz, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,555 mm, travel distance Z-axis: 300 mm, number of axes: 5, number of slots in tool magazine: 15, controller manufacturer: Siemens, total height: 2,300 mm, total length: 8,200 mm, total width: 4,200 mm, overall weight: 6,500 kg, table length: 4,400 mm, table width: 1,400 mm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, For sale is a Reichenbacher Artis 561 Sprint CNC machining center, used in a professional industrial setting. This machine is particularly suitable for the precise CNC machining of wood-based materials, sheet materials, and comparable materials. Thanks to its generous work surface and robust gantry design, it is also suitable for larger components and continuous professional use. Machine / Equipment: Manufacturer: REICHENBACHER Model: ARTIS 561 SPRINT CNC machining center for professional applications Robust gantry design Large machining table Vacuum / clamping table Pneumatic connections available Includes the peripherals visible in the pictures The machine is currently located at the company's site and can be inspected by arrangement. The machine was used in a commercial operation and is being sold due to a restructuring or reorganization of the machinery. Condition: Operating hours: 1,850 hours The machine is in used condition, commensurate with its age. The signs of wear visible in the pictures are present. An on-site inspection is highly recommended. A demonstration of the machine can be arranged after prior appointment. If you are seriously interested, further technical information, pictures, and details about the year of manufacture, control system, spindle, and existing equipment can be provided. Gsdj Ai R Unjpfx Acgeui Self-collection only / dismantling and loading by arrangement. Sale from commercial inventory; an invoice can be issued if required.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, pipe diameter (max.): 30 mm, input voltage: 400 V, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, hardened rollers, HUVEMA MIP30 Profile bending machine, pipe bending machine 30mm ct2437 For sale in excellent condition HUVEMA MIP30 profile bending machine, pipe bending machine Manufacturer: HUVEMA MIP 30 Type: MIP 30 Year of manufacture: 2013 Rollers: 2 driven Upper roller up-down movement manually Max. shaft diameter: 30 mm Working speed: 4 m/min Bending capacity: - Flat steel: 50 x 10 mm - Square 35 mm - Closed section: 40x 40 mm - Pipe 48 x 3 mm Power: 400 V / 0.75 kW 50Hz Electric foot switch, with emergency stop Standard bending set Weight: approx. 200 kg Dimensions: W 650 x H 1350 x D:580 mm Godpfxjzq Sqte Acgjui

Condition: used, Year of construction: 1995, Ring & profile bending machine Type: Alpha 50 H2 Shaft diameter 50 mm Shaft length 115 mm Standard roller diameter 175 mm Speed ​​8 rpm Gedpfxowmdp No Acgeui 3 rollers driven Weight 650 kg Hydraulic roller adjustment Including various roller sets Price excluding VAT

Condition: ready for operation (used), functionality: fully functional, control type: manual, actuation type: hydraulic, Geka (Spain) Hydraulic Punching, Shearing, and Notching Machine Model: Hydracrop–55/110A Year of Manufacture: 2001 Flat Bar Shear Capacity: 300 x 15 mm / 200 x 20 mm Blade Length: 305 mm Square: 25 mm Working Height: 880 mm Angle Shear Capacity: 1100 kN Deformation-free Angle Iron: 120 x 120 x 10 mm Angle Iron 45° Shear: 70 x 70 x 7 mm Round and Square Bar Shear Round Steel: 40 mm Square Steel: 40 mm Notcher Sheet Thickness: 10 mm Angle Iron: 100 mm Notch Depth: 90 mm Notch Width: 42 mm Punching Station Capacity: 550 kN Maximum capacity with quick-change system: Ø 40 x 10 mm / Ø 20 x 20 mm Throat Depth: 250 mm Stroke Length: 60 mm Working Height: 1085 mm General Specifications Godpfx Acoyxpawjgeui Number of strokes per minute at 20 mm stroke: 25 Power: 3 kW Net weight: 1320 kg Gross weight: 1518 kg Dimensions (L x W x H): 1600 x 1100 x 2000 mm Machine Details - 2 cylinders: one for the punching side, one for the shearing side - Punching unit with quick-change system - C-frame die holder + extra support - Nipple and die up to Ø 40 mm selectable - Flat bar shear incl. support table and 45° and 90° guides - Angle shear - Round and square bar shear (suitable for mounting U and I profiles as well) - Rectangular notcher - Emergency stop - Key switch for notcher safety - Selector switch for deep or shallow punch/shear operation - Selector switch for foot pedal / back gauge - Stroke adjustment for punch and shear side - 2 foot pedals - Scrap collection tray for punch slugs - Dutch instruction manual Includes: Punch table incl. back stops Notching table incl. back stops Electric length stop 1000 mm 30 sets of punch nipples Price of the Geka Hydraulic Punch/Shear/Notch Machine: €16,500 Machine is as new, original paint, like new, original finish Delivery conditions: Delivery time: from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV cannot be held liable for discrepancies between the technical specifications in this offer and the actual machine, accessories, and/or parts. Machines, accessories, and parts are sold as-is and as known to the buyer. We cannot provide a warranty for used machines, accessories, and parts. Delivery terms: Delivery time: ex stock, excluding VAT Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe that stocks and sells primarily used Kardex Remstar automatic lift and rotating warehouse systems. We install and/or dismantle these systems safely with VCA-certified engineers and have been doing so for more than 33 years. Best regards, Antoine de Leeuw Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands VAT No.: NL800103026B01 Chamber of Commerce Tilburg 18034279

Condition: used, Year of construction: 2004, Matsuura MAM72-3VS 5 Axis Multi pallet Machining Centre (2004), Traverses X Y Z: 680 x 394 x 625mm, B axis -110/+ 65 degrees, C Axis 0.001 degrees, Pallet Diameter 130mm, Maximum Workpiece Diameter 300mm, Maximum Workpiece Height 300mm, Number of Pallets 40, Spindle Taper BT40, 240 Station ATC, Spindle Speed 12000rpm, Fanuc G-Tech 16I Control, Through Spindle Coolant and Swarf Conveyor. S/No. 15738. Country of Origin: Japan Gusdpfxs Ah Hcwo Acgei Location: This lot is located in Leicester, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2023, Nakamura Tome AS200L Twin Spindle Turning Centre 5 Axis Machine wtih Nakamura Tome Fanuc CNC Control, Hainbuch Spanntop Mini AXFIX6S Collet Main Spindle, Buck BB206 3 Jaw Chuck Sub Spindle, 15 Position Driven Tool Turret, Renishaw Tool Setting Probe, Parts Catcher, Hydrafeed Multifeed 6S Barfeed, LNS Swarf Conveyor, Filtermist 5800 Oil Mist Filter, Coolant Tank, Transformer. S/No. KL205307 (2023) Gjdpo Afmi Dsfx Acgeui Location: This lot is located in Birmingham, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Width: 60 cm Complete roll forming line equipped with tools for the production of a new type of industrial gutter for galvanized steel/stainless steel CE compliant Uncoiler capacity: 2 metric tons maximum width: 600 mm inner and outer coil diameter: 508–920 mm hydraulic jaw expansion: 460–640 mm 4 kW Roll forming line Type H 18 stations maximum width: 600 mm maximum thickness: 0.8 mm shaft diameter: 60 mm maximum center-to-center shaft distance: 300 mm Siemens Simatic touchscreen control + Ethernet connection 7.5 kW Hydraulic shear Force: 5 metric tons Guedpfx Aez R S T Uscgsi Condition: machine has seen very little use; new value 450,000 euros Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Pickup days are on: - Tuesday 1 December - Thursday 3 December Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, working width: 205 mm, working height: 60 mm, Spraying machine for profiles / Automatic spraying machine for moldings Manufacturer: Falcioni Type: Flexispray Year of manufacture: 2005 Linear continuous spraying machine for the automatic coating of profile moldings, frame moldings, profile boards, and baseboards, with a spray booth, belt conveyor, and programmable gun control. Typical applications: Molding production, frame and picture frame manufacturing, profile wood and panel production, contract coating. Intended coating materials according to the manufacturer: - UV stains and water-based stains - Water-based paints applied by spraying - UV paints Workpiece dimensions: Max. working width 205 mm Max. workpiece height 60 mm Minimum workpiece length 400 – 800 mm Feed: Feed speed 20 – 120 m/min Conveyor drive 0.75 kW, inverter-controlled Extraction: Exhaust fan 0.55 kW Exhaust capacity 5000 m³/h Compressed air: Operating pressure for gun control 4 – 5 bar Compressed air consumption 1200 Nl/min Electrical system: Installed total power 1.6 kW Machine weight approx. 600 kg Equipment: - 3 spray guns - without material pump Basic concept: - Spray booth with large-area glazing - Rubber-coated conveyor belts at the infeed and outfeed, roller conveyor in the spraying zone - Gun activation via workpiece detection with a pressure roller and microswitch - Electronic control system VT 50 for programming gun height and on/off points for each gun, display of belt speed, meters produced, and quantity - Overspray recovery via collection trays and collection tanks Godj Aa Ad Tepfx Acgsui - Dry filter system for exhaust air purification - Operation by one person Note: The technical specifications have been taken from the manufacturer's operating manual and may differ from the actual design of the machine.

Year of construction: 2005, condition: good (used), functionality: fully functional, machine/vehicle number: 8382, 2-head welding machine for PVC profiles Gjdozdq Ttopfx Acgoui

Condition: used, Year of construction: 2000, control FIDIA PCN 775 . x-travel 1000 mm y-travel 620 mm z-travel 700 mm Axis 5 Achsen simultan gesteuert weight 12 t +++++ Please note: Gedjx U A S Sjpfx Acgsui The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Akyapak APK 81 with control system Control system: AKYAPAK AK-400 Year of manufacture: 2018 Angle iron – legs pointing outwards: 76 × 76 × 9.5 mm, internal diameter 1,600 mm Gujdpfx Aco Aiqnusgsi Angle iron – legs pointing inwards: 76 × 76 × 9.5 mm, internal diameter 1,981 mm Flat steel – lying flat: 121 × 28.6 mm, internal diameter 2,083 mm T-profile: 76 × 76 × 7.9 mm, internal diameter 1,397 mm Rectangular steel: 122 mm, internal diameter 2,083 mm Square steel: 44.5 mm, internal diameter 1,016 mm U-profile: 9.5 × 7.9 mm, internal diameter 1,219 mm Motor power: approx. 5.1 kW Roller diameter: 245 mm Shaft diameter: 80 mm Bending speed: approx. 4.0 m/min Operating voltage: 230 / 480 V, 3 phases, 60 Hz Standard roller set included