Used Profile Bending for sale (8,691)

Condition: new, Year of construction: 2025, Mandrel-free pipe bending machine RB 54 - NC-controlled, with large program memory Article number: 4300054 NC control for setting the bending angle Up to 50 programs can be saved High-quality, robust design Fast tool change Purely motor drive Automatically returns to the starting position TECHNICAL DATA General information Bending radius max. 162mm Bending angle max. 210° Bending speed(s) 2rpm Hedevk Scgspfx Aacefn Torque 2341Nm Dimensions and weights Length (product) approx. 600mm Width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending performance Bending performance of pipe material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 650 N/mm² (Ø x wall thickness) 42 x 3mm Electrical data Drive motor power 1.1kW Connection voltage 400V Mains frequency 50Hz Location: from stock - available immediately -

Condition: good (used), SOCO SB-63 Auto CNC Horizontal Hydraulic Tube Bender With Tooling Packages Hjdexc H N Iepfx Aacefn Diameter Of The Bent Pipe (Steel) Ø2.5-63.5mm. Diameter Of The Bent Pipe (Stainless Steel) Ø1.6-63.5mm. Single Travel 2,030mm. Bending Radius 250mm. The Length Of The Pin 3,200mm. Bending Angle 190°. Bending Speed 45°/sec. Feed Speed 700mm/s. Bending Accuracy +/- 0.2°. The Accuracy Of The Positioning Movements +/- 0.15°. Accuracy Of The Feed +/- 0.25°. Main Engine Power 10kW. Number Of Bends Per Pipe 15. Pipe Rotation Speed 120°/s. Weight 2,000kg. Tooling Packages 1 x Tool 1098 - Full Set Of Tools 19.05 x 1.63 x 30 C/L/R, 1 x Tool 1099 - Full Set Of Tools 13/8" x 1.63 x 45 C/L/R.

Condition: good (used), functionality: fully functional, A Thermobend 2000 is a bending machine used for bending plastic sheets such as PMMA (acrylic glass) and methacrylate. The machine operates with heating wires to heat and bend the sheets at specific locations. Key features Capacity: The machine has a usable length of 2000 mm. Functionality: Can bend sheets with a thickness of 1 mm to 20 mm. Configuration: Equipped with 2 bending beams heated both from above and below. The distance between the wires is adjustable, with 3 wires above and 3 below per group. Dimensions: Length: 3200 mm x Width: 1000 mm x Height: 1600 mm Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend verifying all relevant details. Financial information VAT/margin: Hedpfx Aasxn T Nrscjfn Margin: The listed price includes VAT (VAT is non-deductible for businesses).

Condition: good (used), Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 9 pieces -Profile diameter: 27 to 60 mm see photos -Hole: Ø 32 mm -Shipping/Price: complete Hfodsxmirtopfx Aacjn -Transport dimensions: 655/350/H120 mm -Weight: 42 kg

Condition: used, Year of construction: 2025, total length: 1,300 mm, total height: 1,400 mm, total width: 800 mm, Empty weight: 800 kg Price: On request - Year: 2025 - Documentation available: Yes - CE marking present: Yes - Serial number: HB10011N2025006 - Operating hours: 0 - Control: Teach-in - Motor power: 4.0kW - Table width: 550mm - Table length: 300mm - Model: Hydraulic - Max. stroke: 180mm - Power: 28.0ton - Transport dimensions: 1300mm x 800mm x 1400mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hsdpfjxixruex Aacjfn Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, tube diameter 42.0 mm Stahl wall strength 3.0 mm Stahl Hsdpfx Aexaa Sdsacsfn tube diameter 54.0 mm CU/Alu wall strength 2.0 mm bar material - diameter 30.0 mm revolutions per minute 2.0 U/min voltage 230 Volt total power requirement 1.1 kW weight 80.0 kg range L-W-H 410 x 1000 x 570 mm ERCOLINA MediBender "MB 42 M" - Capacity steel pipe 42 x 3.0mm - Capacity gas pipe 1“1/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm - Minimum radius 2 x D - 6-edge tool holder - Min. outside diameter 5 mm - 1/8“ gas Equipment: - patented fast tool change system - one bending speed - freely movable foot switch - bending tools on request for an additional charge including ERCOLINA microprocessor control: - with 30 programs each program with up to 9 bending angles programmable - in addition, the necessary correction angles can be entered . for each bending angle in the working mode BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: excellent (used), Year of construction: 1970, ##### ATTENTION: SPECIAL PRICE DUE TO BUSINESS CLOSURE ##### Machine Type: 5-way combinable profile steel shear with punching unit Manufacturer: PEDDINGHAUS Model: Peddy Year of Manufacture: 1970 Condition: Very good Offer Type: Used machine Technical Data: Performance in mm: Sheet: Ø 10 mm Round: Ø 28 mm Hole: Ø 15 in 10 mm Drive Type: electric/mechanical Drive Motor: 1.5 kW Remarks: Punching unit, Notcher, Material stop, Hfsdpfx Asd R Dkfoacsn Swivel base Weight: 500 kg The machine is in excellent and fully operational condition and can be inspected and demonstrated at any time on our premises. We would be pleased if our offer meets your interest. Subject to errors, changes, and prior sale.

Condition: new, functionality: fully functional, Year of construction: 2025, The EVO is the latest innovation in sheet metal processing. It is equipped with numerous innovative and patented features that increase your production capacity and productivity, while offering the lowest total cost of ownership. The high-quality components used in this machine, as well as the latest version of the BENDtronic® control system, which is installed as standard on all EVO machines, are particular highlights. HAEUSLER EVO 21015 4-Roll Bending Machine / Roll Bending Machine Manufacturer: Haeusler Type: EVO 21015 4-Roll Bending Machine / Roll Bending Machine Origin: Germany / Switzerland Condition: NEW, Display Machine Availability: 12-14 weeks Capacity: Working width 2100 mm Rolling capacity 12 mm Pre-bending capacity 9 mm Hfedpexnnf Isfx Aacjn Standard Equipment: • Variable swing arm adjustment of the side rollers VSA® • HAEUSLER Hybrid Drive System HHDS® • Movable 21.5" touchscreen control panel including high-end BENDtronic® control • Continuously adjustable rotation speed between 0 and 8 m/min • Machine prepared for remote maintenance • Electromechanical holding system for the rotation of the upper roller • Automatic pressure adjustment of the lower roller • Automatic pressure compensation of the Bottom roll cylinders: Standard cooling system for ambient temperatures up to 35°C • Automated axis optimization • Automatic hydraulic shutdown for roll positioning • Ultra-compact design to reduce or even eliminate foundation costs • Safety ripcord Optional equipment: • Two-roll drive for the top and bottom rolls • Cone bending device for bending conical workpieces • Advanced cooling system for ambient temperatures up to 45°C • Top support for easier bending of large diameters • Side support for assisting with bending of large diameters • Gas pressure accumulator for calibrating previously welded cylinders • BendIT-Office workstation software • Autonomous bending • Machine prepared for quick top roll changes • Interchangeable top rolls with different diameters for bending small-diameter sections • Hardened rolls for bending black and stainless material • Infeed roller conveyor for easy sheet feeding into the machine • Centering device for the infeed roller conveyor, for automatic centering of sheets before bending Not the right machine? As a Haeusler representative, we can customize and offer you the machine you need. Don't hesitate to contact us.

Condition: good (used), functionality: fully functional, Type: gosmeta 3-roll plate bending machine Maximum rolling length: 2100 mm Estimated rolling thickness (S235) over the entire length: between 8 and 10 mm Exact value not known, as the nameplate is unreadable Top roll diameter: 190 mm Lower roll diameter: 170 mm Rolling speed: 5.3 m/min Lower rolls: powered Drive: electric Side: fold-away for removing edge-bent products Shafts for profile rolls: 3 × Ø 90 mm Foldable side for removing closed cylinders. Equipped with emergency stop wire around the machine. Hfedsxmvhzspfx Aacon Profile rolls or special segment rolls can be mounted on the 3 × Ø 90 mm shafts. Machine dimensions: length 360 cm x width 120 cm x height 140 cm Weight approx. 2800 kg

Year of construction: 2005, condition: excellent (used), pneumatic punching machine Hedpfx Aasff Apwocsfn

Year of construction: 2020, condition: ready for operation (used), General Data Measurements width 1300 mm Measurements depth 2450 mm Measurements height 1900 mm Hfsdpfx Aajxnr Erscsn Control Unit Brand SIEMENS This LAFRANCONI LM 400 die bending machine was manufactured in 2020. It features a NC roller feeder, a max stroke rate of 350 1/min, and a material width capacity of 60 mm. The machine operates with a 20 KN center ram force and a 45 mm stroke. Powered by a 10.6 kW asynchronous spindle motor, it adjusts from 20 to 350 rpm. Dimensions are approximately 2450×1300×1900 mm. Contact us for more information about this machine. Application Types Bending

Year of construction: 2024, condition: new, 1050 mm Hodpfjq Sz Ahex Aacefn 5,5 mm 5,0 mm roll diameter 130 / 195 mm 2,2 kW 1050 kg 2150 x 900 x 1200 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment

Condition: good (used), ##### ATTENTION: SPECIAL PRICE DUE TO BUSINESS CLOSURE ##### Machine type: Two-roller round bending machine for gutter production Condition: good Offer type: used machine Technical data: Capacity: 2040 x 1.0 mm Drive type: electrical/mechanical Hsdpjq R Ub Asfx Aacjfn Drive: 0.8 kW Note: with 4 shafts for different gutter diameters: 55, 60, 70, 85 mm Weight: 550 kg The machine is in good and immediately operational condition and can be inspected and demonstrated at our premises. We would be pleased if our offer is of interest to you. Errors, changes, and intermediate sale excepted.

Condition: used, Year of construction: 2010, functionality: fully functional, total width: 2,400 mm, total length: 2,500 mm, total height: 2,300 mm, feed length X-axis: 750 mm, feed length Y-axis: 485 mm, feed length Z-axis: 335 mm, travel distance X-axis: 750 mm, travel distance Y-axis: 485 mm, travel distance Z-axis: 335 mm, grinding wheel width: 600 mm, table width: 300 mm, overall weight: 4,800 kg, Capable of creep feed grinding, plunge grinding, and transverse grinding. This machine also comes with 2x Rotary Diamond Disc dressing units, one unit being stationary and the other unit being an extremely rare option on these machines which is a motorized "swivel" rotary diamond disc dressing unit with a stationary diamond on the end (see pictures). Hjdpfjxaqm Ssx Aacsfn

Condition: good (used), Year of construction: 2019, Serial no.: 8.851.053, milling unit, material thickness 2 - 6 mm, speed 12,000 rpm, 10 pressure rollers, model Fresatrice Pigatrice Alu Bender, 8 ball roller tables, each approx. 1,900 x 900 mm, aluminium Hfodpfxjxl At Ie Aacen

Year of construction: 2005, condition: excellent (used), machine/vehicle number: 47885/05, pneumatic punching of window profiles Hfsdpfx Aaoff Apiscen Stroke 20 mm

Condition: good (used), Year of construction: 2008, functionality: fully functional, grinding length: 2,000 mm, grinding width: 850 mm, CNC Precision Surface and Profile Grinding Machine Technical Specifications: Grinding length 2000 mm Grinding width 850 mm Travel, transverse 750 mm Distance from table to spindle center 900 mm (or 800 mm with intermediate plate) Magnetic plate size 2000 x 700 mm Table load without magnet 3500 kg Table speed 60 m/min. Spindle drive 26 kW Grinding wheel dimensions 500 x 150 x 203.2 mm Grinding wheel peripheral speed 35 m/s control Siemens 840 D total power requirement 155 kVA Hjdpfxexgryae Aacefn weight of the machine ca. 15 t dimensions of the machine ca. 8815 x 4185 x 2963 mm

Condition: used, pressure 32 t stroke 250 mm table-size 500 x 760 mm work height max. 925 mm bending speed max. 25 mm/sec tank capacity 80 l Pressure power 320 bar total power requirement 5,5 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,3 x 0,5 x 1,3 m Hfodpfx Aogvkigjacjn ding height: 200 mm Cutting capacity max. (St): 150 x 14 Punching capacity max. (St) Ø 35 Guide height: 200 mm

Condition: new, Year of construction: 2025, - Capacity 1070 x 5 - Electrically adjustable rear roller - Digital display for the movement of the rear roller - Hardened rollers - Conical rolling - Rotating top roller Hfodpfxeirwlaj Aacjn - Brake motor - Foot control - Emergency stop - documentation - 400V

Condition: good (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: 0100-0149-2024, overall weight: 700 kg, total length: 3,500 mm, total width: 1,100 mm, total height: 1,500 mm, TECHNICAL DATA & EQUIPMENT: Hjdpsxm Symsfx Aacjfn Suitable for flat material Working length: approx. 2500 mm PICK-UP NOTES: Collection must take place strictly between December 10th and 12th FCA Winterlingen, loaded onto truck

Year of construction: 2009, condition: new, belt dimensions 2000x100mm Hfjdpfjx Davsx Aacsn Belt speed 30m/sec Angle adjustable from 30 to 90 Power 3kW 4000V50Hz Weight 200kg Rollers for grinding rye 3/4";1/2"; 1"; 11/4"

Condition: new, pressure 28 t stroke 180 mm table-size 300 x 550 mm diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec return speed 20 mm/sec Max. pressure 200 bar weight of the machine ca. 0,65 t total power requirement 4 kW dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered. Hfedpfx Aegvkmrsacon

Condition: as good as new (ex-display), A manual demonstration bending machine WIEGAND bending length: 1020 mm bending capacity: 2,5 mm max. bending angle: 0 - 135°. segmentation of the upper beam: 270; 200; 150; 100; 75; 50; 45; 40; 35; 30; 25 mm opening width of the upper beam: 45 mm Hfjdpfxopgmtwj Aacen backgauge manually adjustable up to: 540 mm weight: 285 kg

Condition: as good as new (ex-display), A fully hydraulic demonstration bending machine WIEGAND with NC- 10 control system manual or automatic bending mode automatic mode: Close upper beam, bend set angle, open upper beam Hfedpfxopgmqio Aacjn bending beam or upper beam manually adjustable according to sheet thickness adjustable opening width of upper beam backgauge manually adjustable CE standard documentation bending length: 2500 mm bending capacity: 2,5 mm max. bending angle: 0 - 120°. backgauge manually adjustable min/max: 60/1000 mm power: 3,0 kW weight: 2500 kg Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document

Condition: as good as new (ex-display), A manual demonstration bending machine WIEGAND Bending length: 2020 mm Hedepgmq Ujpfx Aacsfn bending capacity: 1,0 mm max. bending angle: 0 - 135 weight: 325 kg option: Rolling shear Cutting capacity of the shear: cutting length: 1600 mm Sheet thickness up to 400N/mm² strength: 0,8 mm Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document