Used Profile Bending Machine for sale (86,687)

Condition: new, functionality: fully functional, Year of construction: 2024, shaft diameter: 50 mm, roller diameter: 155 mm, overall weight: 400 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, Equipment: documentation/manual, emergency stop, Brand: Sahinler Psdpfx Agswt Sy Aj Djgw Model: PK 35 Year of manufacture: 2024, unused Capacity (kW): 1.5 Voltage: 400 Frequency (Hz): 50 Dimensions LxWxH (mm): 1000 x 750 x 1400 Weight (kg) approx.: 400 Units in stock: 4 Manufactured in: Turkey Ø Diameter (mm): 50 Comments: Unused machines at competitive prices, multiple units in stock, foot pedal included.

Condition: good (used), profile bending machine Psdpjwtph Dofx Ag Degw

Condition: good (used), Diameter of standard rollers 360 mm Shaft Ø 140/120 mm Motor power 10 HP Hydraulically adjustable back-up rollers Pjdpfx Asnp I Iljg Dsgw Mecanic drive for all 3 rollers Equipped with: rollers for diameter 110 and 85 mm, and standard rollers.

Condition: used, Year of construction: 1995, Ring & profile bending machine Type: Alpha 50 H2 Shaft diameter 50 mm Shaft length 115 mm Standard roller diameter 175 mm Speed ​​8 rpm 3 rollers driven Weight 650 kg Psdpfx Aswmdp Neg Dogw Hydraulic roller adjustment Including various roller sets Price excluding VAT

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, The machine consists of three units / working stations. It is a dry-air system (no oil required) and is ready for immediate use. The machine has very few operating hours. Our company is based in Larissa, Greece. Psdoxzc U Ropfx Ag Dsgw

Condition: new, Year of construction: 2025, 2-roll driven profile bending machine Hydraulically adjustable top roller Shaft diameter: 40 mm Roller diameter: 152-162 mm Revolutions: 8.5 per min. Top roll adjustment: 120 mm Capacity table: in the attachment Pedpfxohgiuhs Ag Degw Machine available in various versions: Manual adjustment, 3-roll driven etc.

Condition: good (used), Brand Ercolina Model CE40H3 Year of manufacture 2006 Hydraulic drive Roller diameter Ø 165 mm Shaft Ø 40 mm Tube capacity (thin-walled) Ø 70x1.5 mm min. Ø 700 mm Tube capacity (thick-walled) Ø 2" x 3.2 mm min. Ø 450 mm Angle section capacity 50x50x6 mm min. Ø 400 mm Flat bar capacity 50x10 mm min. Ø 250 mm Flat bar capacity (hard edge) 100x15 mm min. Ø 250 mm Box section capacity 50x50x3 mm min. Ø 500 mm Shaft capacity Ø 35 mm min. Ø 250 mm Power 1.85 kW Podpfx Agsw Hx Tvo Djgw Bending speed 10 rpm.

Condition: good (used), Year of construction: 1999, Manufacturer: Tauring Type: DELTA 50 CNC Control: TAURING CNC-S Pgodjwp Idvepfx Ag Djw Year of manufacture: 1999 Shaft length 115 mm Max roll diameter 175 mm CNC-C means Computerised Compact Numerical Control. Thanks to the small size offered by the most modern technology and a competitive price it has been possible to obtain a powerful, reliable and suitable product. Tauring bending machines can be equipped with this device, which gives the possibility to realise any shape of regular and irregular geometrical bending. The machine equipped with the CNC-C device executes automatically and in only one pass up to 30 program steps (in the same bar 30 bends of different radius), by simply setting the radius and length in mm of each segment composing the shape. Specifications Metric US Standard Horizontal and Vertical H+V Axis Ø 115 mm Number of rolls 3 Control TAURING CNC-S Dimensions (estimate) Length 1400 mm Width 1400 mm Height 1400 mm Weight 780 kg Please note: The information on this page has been obtained to the best of our knowledge and belief by us, and where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not represent any warranty or contractual terms. We recommend that you check all essential details.

Condition: used, Ring bending machine, profile bending machine, three-roll bending machine, bending machine -Replacement rollers Pjdpfxeddk Iao Ag Djgw -Tool for: Ø 35 mm pipe -Outside: Ø 200 mm -Bore: 49mm -Quantity: 4 rolls available -Price: complete -Weight: 44kg

Condition: new, Year of construction: 2024, machine/vehicle number: 302340, Profile Bending machine KB Türkei model MB 30 bottom shaft 30 mm top shaft 35 mm two rollers driven Pgodpsd S Uf Sofx Ag Dew with basement capacity: up to round tube 48 x 3,0 mm flat material 50x10 mm square tube 40x40x3,0 mm weight 170 kg motor 0,75 kw 400 Volt 50 Hz 3 ph.

Condition: good (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: AR200, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: MG, controller model: EVO, number of rollers: 3, shaft diameter: 200 mm, rotational speed (min.): 5 rpm, rotational speed (max.): 5 rpm, power: 29.42 kW (40.00 HP), input voltage: 400 V, type of input current: three-phase, operating pressure: 240 bar, Equipment: CE marking, documentation/manual, emergency stop, hardened rollers, Profile bending machine model AR200 brand MG srl year 2016 Machine in perfect condition, very little use Capacity chart of the machine in enclosed. Model AR200 Configuration -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic with gear unit each shaft Pgodpexb Ecwsfx Ag Dsw side arms hydraulic move in 3 direction for keeping guided the profile being formed. NR. 2 set of rollers with the machine for pipe bending SIZE 159MM - SIZE 139,7 MM -Control panel console CNC programmable with automatic rolling, touch screen 15” , display the 9 axis of the machine with readout for manual use and fully programmable automatic forming -Electric power supply 3phase 400/50 Vac -40HP -Service manuals and operation books original. Additional set of rollers and tooling for specific application can be provided upon request Bending for HEB - IPE -UNP - ANGLE – T -SECTION- TUBULAR- IRON BAR ON EDGE -ETC..

Condition: good (used), Technical data: 2 rollers hydraulically adjustable 3 rollers driven Bending moment: 110 cm/3 Shaft diameter: 180 mm Pgsdpfx Agjt Ukqae Dew Roller diameter: 460 mm Main motor power: 15 kW Digital display Dimensions (length x width x height): approx. 2000 x 1700 x 1600 mm Weight: approx. 6.5 tons The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Condition: new, Ring profile bending machine Ostas OPK 42 Incl. standard roller set steel Motorized ring bending machine horizontal and vertical applicable with 2 driven rolls lower rolls motor driven rollers are hardened manual feed via upper roller left/right rotation by means of foot pedal shaft-Ø 50 mm roller-Ø top 158 mm Pjdpfxsgw Hmqs Ag Degw roller-Ø bottom 158 mm speed 4,4 m/min Motor power 0,75 kW Electrical connection 400 V According to CE standard Weight 380 kg According to CE standard

Condition: good (used), Year of construction: 2009, Manufacturer: BAILEIGH Type: R-H 120 Control: Telemechanique Year of manufacture: 2009 Arm adjustable 330 mm Hydraulic side support Set of universal rolls Set of pipe rolls 88.9 mm Set of pipe rolls 60.3 mm Digital readout system position side rolls Horizontal & vertical operation possible Specifications Metric US Standard Horizontal and Vertical Horizontal & Vertical Axis Ø 100 mm Number of rolls 3 Horizontal Yes Vertical Yes Flat capacity 100 x 240 x 1600 mm Pipe capacity 139 x 4 x 3000 Ø x mm T-profile capacity 100 x 100 x 1000 mm Working speed 0 - 5500 mm/min. Adjustable side roller range 200 Pjdjwpkwfepfx Ag Djgw Upper roller pressing force 200 Bar Side support yes, 330 mm stroke Dimensions (approximate) Length 1800 mm Width 1600 mm Height 2000 mm Weight 2300 kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend that you verify all important details. Share on

Condition: used, Ring bending machine, profile bending machine, three-roll bending machine, bending machine Pgedpod Naw Aofx Ag Dsw -Spare roles -Outer diameter: 200 mm -for: 35 mm pipe -Bore: 49 mm -Dimension: Ø 200 x 81 mm -Weight: 11 kg

Condition: new, Year of construction: 2024, Ring Rolling machine ZOPF - model ZB 30/3 H (without basement) TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout programmable - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 20 mm - roller diameter: 76-86 mm - shaft rpm: 11 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 0,18 kW - hydraulic motor 0,55 kw - adjusting way: 35 mm - weight: 110 kg Psdpogh T Iaofx Ag Degw - dimensions: 530x420x500 mm

Condition: good (used), functionality: fully functional, degree of automation: manual, actuation type: electric, number of rollers: 3, shaft diameter: 130 mm, roller diameter: 380 mm, rotational speed (min.): 5 rpm, overall weight: 4,500 kg, power: 15 kW (20.39 HP), input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, emergency stop, PROFILE BENDING ROLL 130- MODEL PARMIGIANI ITALY ELECTRO MECHANICAL MACHINE SHAFTS OUTPUT DIA..130 MM 3 ROLLERS PYRAMID UPPER ROLL DRIVEN ROTATION WITH GEARUNIT ONELECTRIC MOTOR Kw 11 SIDE ROLLERS BENDING POWERED ON ELECTRIC MOTOR Kw 3 UPPER ROLL DIA 380 mm Pjdpfsxackcsx Ag Dogw SIDE ROLLERS DIA 350 mm CONTROL PANEL UPGRADED LATEST TECHNOLOGY ELECTRIC INVERTERS FULL POWER CONTROL WITH INFINITE VARIABLE SPEED COMMANDS ELECTRIC ON PORTABLE PUSH BUTTONS DIGITAL POSITION READOUT OF THE BENDING ROLLERS WEIGHT OF THE MACHINE 4,5 TON SAFETY AND EMERGENCY SYSTEM INSTALLED MACHINE WORK WITH VERTICAL SHAFTS

Condition: new, Ostas hydraulic profile ring bending machine OPK 45 2 driven rollers Digital display Incl. standard steel roller set Description Hydraulic / motorized ring bending machine Can be used horizontally and vertically with 2 driven rollers 2 rollers motor-driven Adjustment of the upper roller hydraulic Rollers are hardened Left/right rotation using foot pedal Mounting: shaft 50mm Pjdpfxovmzfij Ag Dogw Roller diameter at top 158 mm Roller diameter at bottom 158 mm Speed 4.5 m/min Motor power: 0.75 +1.5 kW Electrical connection 400 V According to CE standard Weight 420 kg

Condition: good (used), Year of construction: 2018, Manufacturer: INDUCTAFLEX Type: AL-3e Pgsdpfx Ajvd Dftog Dsw Control system: ACCURATE touch screen Year of construction: 2018 3 rolls driven servo Torq each roller 3500 nM Electrically support rolls Intelligent software : Ellipse program U Bend shapes control of tangents Auto section detector Specifications Metric US Standard Horizontal and Vertical Horizontal Axis Ø 105 mm Number of rollers 3 Stroke X axis 0 - 400 mm Dimensions (estimate) length 4500 mm width 3200 mm height 2700 mm weight 3300 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: new, Year of construction: 2024, Bending machine ZB 70/3 H NC Zopf - semiautomatic - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to Pgsdpfsfkz Rbsx Ag Djw - adjusting way: 120 mm - weight: 490 kg - dimensions: - colour RAL5012 / RAL7015 NC-CONTROL for ZB 70/3 HA: - two axes controlled - touch screen - memorise of 1000 programs ech 19 steps - interpolation - accuracy of the y-axes 1/10 mm - programmable forward and backward

Condition: new, Tubend hydraulic profile ring bending machine HPK 50 3 driven rollers Digital display Incl. standard roller set steel Hydraulic / motorized ring bending machine Can be used horizontally and vertically with 3 driven rollers Podpfxeum R U Ao Ag Dsgw 3 motor-driven rollers Hydraulic infeed of the top roller Hydraulic: 8 tons Rollers are hardened Left/right rotation via foot pedal Mounting: shaft 50 mm Roller Ø 162 mm Speed: 4.5 m/min Motor power: 1.1 kW Electrical connection 400 V According to CE standard Weight 510 kg L.W.H. 810 x 950 x 1500mm Power table see PDF file

Condition: new, Ostas Hydraulic Profile Ring Bending Machine OPK 45 - 3 Special equipment included in the price: Pedpfeg Tzbwjx Ag Djgw 3 driven rollers Digital display Incl. standard roller set steel Description Hydraulic / motorized ring bending machine horizontal and vertical applicable with 3 driven rolls 3 rollers motor driven Feeding of the upper roller hydraulic Rollers are hardened Left/right rotation by means of foot pedal Shaft 50mm roller-Ø top 158 mm roller-Ø bottom 158 mm Speed 4,5 m/min Motor power : 0,75 +1,5 kW Electrical connection 400 V According to CE standard Weight 420 kg

Condition: new, Akyapak Akbend ring profile bending machine APK 50 Description - lower roll adjustment, hydraulic both lower rolls can be adjusted - horizontal and vertical working - Control panel ( the position of the lower rolls is shown in the display ) - Standard rollers included - 3 driven rollers - CE-sign / declaration of conformity - Instruction manual Technical details - Bending capacity see performance table - bending speed : 4,4 m/min - Roll diameter : 157 mm - Shafts : 50,0 mm - total power requirement : 1,1 kW - weight: 500 kg Pjdsd Er S Aepfx Ag Degw - Dimension L-B-H: 950 x 700 x 1220 mm

Condition: new, Akyapak Akbend ring APK 35 profile bending machine Description •. base • horizontal and vertical working • Foot switch • Standard rolls (shared) • 2 driven rollers • CE mark / conformity declaration • User manual in German Technical details Podpfx Asd Er S Isg Degw • I - steel - flat: 120 x 15 (d 750) mm • I steel upright: 60 x 10 (800 d) mm • Angle steel: 50 x 5 (1200 d) mm • Round material: 35.0 (800 d) mm • Max size: 70 x 2 (1200 d) mm • Square material: 50 x 40 x 3 mm • Bending speed: 4.3 m / min • Diameter of the roller - top: 155 mm • Bore: 50.0 mm • Total power: 1,5 kW • Weight: 320 kg • Dimensions L W H: 730 x 830 x 1350 mm

Condition: new, Ostas profile ring bending machine OPK 65 Technical specifications: - tool holder, shaft: 60mm - tool: 175mm - working speed: 5m/min - Engine: 3kw - Dimensions L-W-H: 900x1250x1200mm - weight: 1080kg - 3 rollers driven - Hardened standard rollers - Hardened and ground tool holder, shaft - Mobile control panel - Horizontal and vertical working position - Side angle guide rollers Pgedpjfig Aiofx Ag Djw - Digital displays (2pcs.) - Brake motor - According to CE-Norm