Used Production Lathe for sale (20,687)

Condition: good (used), Year of construction: 1980, turning diameter over bed slide: 1,040 mm, turning diameter over top slide: 710 mm, turning length: 2,000 mm, bed width: 600 mm, Optional chuck 1200 mm 2 Axis RSF Digital read out Conical turning attachment Spindle bore 130 mm Central lubrication DBC Turning Length: 2000mm Swing over bed Ø: 1040mm Gsdpfjx Tgr Tox Admeil Swing over cross slide Ø:710mm Swing in the gap Ø: 1780mm Gap length: 1000mm Spindle bore: 130mm Bed width: 600mm Tailstock spindle Ø: 130Ø Stroke pinole: 300mm Spindle taper: 6Mk Power: 22kW Speeds / ranges: 600Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 4000mm/min. Length: 6000mm Width: 2100mm Height: 2100mm Weight: 8300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2014, Control FANUC 31i-B Main Spindle Bar Capacity 65mm Main Spindle Speed 5000rpm Main Spindle Motor 24/20kW Main Spindle C axis 0.0001 degree Sub Spindle Bar Capacity 65mm Sub Spindle Speed 5000rpm Sub Spindle Motor 24/20kW Sub Spindle C axis 0.0001 degree Sub Spindle Stroke 700mm Sub Spindle Rapid 50m/minute Turret 1 Stations 10 Milling Speed 6000rpm Milling Motor 6.5kW X Axis Stroke 110mm X Axis Rapid 30m/minute Z Axis Stroke 320mm Z Axis Rapid 60m/minute Y Axis Stroke 100mm Y Axis Rapid 15m/minute Turret 2 Stations 10 Milling Speed 6000rpm Milling Motor 6.5kW X Axis Stroke 110mm X Axis Rapid 30m/minute Z Axis Stroke 550mm Z Axis Rapid 60m/minute Y Axis Stroke 100mm Gsdpfx Adex H R R Hsmsil Y Axis Rapid 15m/minute Turret 3 Stations 10 Milling Speed 6000rpm Milling Motor 6.5kW X Axis Stroke 180mm X Axis Rapid 30m/minute Installation Footprint 8500 x 1800mm Weight 9000kg Electrics 72 kW, 84 kVA, 122 A, 400 V, 50/60 Hz Accessories Gantry work piece discharge unit, Parts Conveyor, Swarf Conveyor. High Pressure Coolant, Manuals, Tool Monitoring, UNIMAG Interface, Iemca Master 880/33-HF Magazine Barfeed, Hainbuch Collet Chuck fiited to Main Spindle, 3 jaw chuck fitted to Sub Spindle

Condition: used, turning diameter 320 mm turning length 800 mm swing diameter over bed slide 180 mm turning speeds 20 - 3200 U/min spindle bore 36 mm quill travel 160 mm quill: MK 3 machine weight ab. 1200 kg range L-W-H 2000 x 950 x 1600 mm Equipment: - 3-jaw chuck FORKARDT Ã?160 mm Giodsx Tu I Aopfx Admsl - MULTI-FIX quick-change holder with inserts - Coolant device - Lathe chuck guard - Change wheels - Chip back panel - Machine light

Condition: like new (used), Year of construction: 2006, spindle motor power: 15 W, travel distance X-axis: 177 mm, travel distance Y-axis: 41 mm, travel distance Z-axis: 550 mm, rotational speed (min.): 5,000 rpm, total height: 2,065 mm, total length: 4,390 mm, total width: 1,741 mm, overall weight: 5,000 kg, CNC controller: Nakamura-Tome FANUC Capacity X-axis travel mm: 177,5 Y-axis travel mm: ± 41 Z-axis travel mm: 550 B-axis travel mm: 689 C-axis: 360º (0,001º) Turning length mm: 500 Max. turning diameter mm: ø: 190 Distance between spindle centers mm: 780 Bar work capacity mm: 51 Upper turret Tool holder: VDI-30 Number of tool slots St .: 12 Speed driven tools RPM: 3.600 Drive power driven tools kW: 5.5 / 3.7 Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 15 / 11 Maximun torque Nm: 47,2 Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11 Gsdpfx Adex Dbxgemsil Equipment Chip conveyor Part catcher Bar Loader RBK 10016 Milling function Working time hours Potencial nominal kVA: 31,43 Basic machine dimensions / weight Length mm: 4.390 Width mm: 1.741 Height mm: 2.065 Weight kg: 5.000

Condition: used, Year of construction: 1989, Technical details: number of spindles: 6 spindle passage: 20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Gildemeister Type: GS20-6 Yob: 1989 Gjdpfx Adox Hggwomoil six-spindle automatic lathe 8 main spindles for bars up to D=20mm All cross units are equipped with a tool holder (from Gildemeister or IMG Attachments) All longitudinal units are equipped, either fixed or rotating (without collets) An independent feed is installed at position 1 A gear set for one speed is installed A gear set for one cycle time is installed The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at) or *

Condition: excellent (used), Year of construction: 2024, operating hours: 314 h, functionality: fully functional, machine/vehicle number: LL393806057, total length: 8,470 mm, total width: 3,050 mm, total height: 2,370 mm, overall weight: 20,500 kg, Axe & Status Tuscan LL550 X 6000 5-Bedway Heavy Duty Lathe With Fanuc Series 0i-TF Plus CNC Control Running Time 314 Hours. Swing Over Bed Ø950mm. Centre Height Approx 575mm. Distance Between Centres Approx 6,000mm. Carriage Type Box (2 Box Way), Carriage Width Approx 955mm, Cross Slide Width Approx 450mm, Bed Width 990mm. Axis Travel 'X'=480mm, 'Z'=6,000mm. Feed Rate 'X'=0-3,000mm/min, 'Z'=0-3,000mm/min. (2) 'FCG-32C' Ø800mm x Ø320mm Through Bore 4-Jaw Manual Chucks (Front & Back of Spindle). (2) SMW Autoblok 'K4 ZSW' Programmable Steadies, Range Ø52mm - 280mm. Headstock Spindle Nose A2-20. Spindle Bore Ø305mm. Spindle 'X' Axis Servo Motor 3kW, 'Z' Axis Servo Motor 7kW. Spindle Speeds 7-400rpm (Motor 30/37kW), Morse Taper 6. V12-200 Hydraulic 12 Station Turret, 32mm Tool Size, Ø50mm Boring Bar Holder Dimension. Motorised Tailstock Body Movement, Quill Ø165mm, Quill Travel 250mm, MT 6. S/No LL393806057 (2024). Gijdpfx Aex Ivzmsdmsl Electrical Specification AC220V/50Hz, 3 Phase. Automatic Doors & Full Cover Guard, Motorised Fondex Front & Rear Chip Conveyors, Auto Lubrication & 15-Bar Coolant System, Air Conditioned Electric Cabinet, Halogen Work Lights, Unimag DS-2030-30 Disc Type Oil Skimmer, Yong Teng E04-AL60 kVA Transformer, Plus: (2) Steel Cabinets: (1) 500mm x 500mm x 800mm With 6 Drawers & (1) 1,000mm x 700mm x 1,000mm With 6 Drawers, Full Range Of Machine Manuals, Ø800mm 4-Jaw Manual Chuck (Already Described In Original Detail) With Backing Plate & Spare Jaws, (11) Assorted C6 Capto Adaptors Including Boring Bar Holders, Tool Blocks & Facing Tool Holder,; Boring Bar Attachment (To Hold up to 150mm). Overall Dimensions Approx 8,470mm x 3,050mm x 2,370mm High; Weight Approx 20,500kg.

Condition: excellent (used), Year of construction: 2007, turning length: 1,545 mm, turning diameter over cross slide: 660 mm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, Make: MAZAK Type: INTEGREX 200-4 ST Control: MAZATROL MATRIX Year: 2007 Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Giodpfx Asx S Hm Ijdmjl Spindle power: 22kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Height: 2600mm Weight: 14000kg

Condition: good (used), Year of construction: 2014, Control FANUC 31i-B Main Spindle Bar Capacity 42mm Main Spindle Speed 7000rpm Main Spindle Motor 29/25kW Main Spindle C axis 0.0001 degree Sub Spindle Bar Capacity 42mm Sub Spindle Speed 7000rpm Sub Spindle Motor 19/16.5kW Sub Spindle C axis 0.0001 degree Sub Spindle Stroke 500mm Sub Spindle Rapid 60m/minute Turret 1 Stations 10 Milling Speed 6000rpm Milling Motor 4.2kW X Axis Stroke 70mm X Axis Rapid 30m/minute Z Axis Stroke 250mm Z Axis Rapid 60m/minute Y Axis Stroke 70mm Y Axis Rapid 15m/minute Turret 2 Stations 10 Milling Speed 6000rpm Gedox H R Rtspfx Admoil Milling Motor 4.2kW X Axis Stroke 70mm X Axis Rapid 30m/minute Z Axis Stroke 400mm Z Axis Rapid 60m/minute Y Axis Stroke 70mm Y Axis Rapid 15m/minute Turret 3 Stations 10 Milling Speed 6000rpm Milling Motor 4.2kW X Axis Stroke 125mm X Axis Rapid 30m/minute Installation Footprint 7612 x 1530mm Weight 5500kg Electrics 57 kW, 68 kVA, 97 A, 400 V, 50/60 H Accessories Gantry work piece discharge unit, Parts Conveyor, Swarf Conveyor. High Pressure Coolant, Manuals, Tool Monitoring, UNIMAG Interface, Iemca Boss 552-HD Magazine Barfeed, Hainbuch Collet Chuck fiited to Main Spindle, 3 jaw chuck fitted to Sub Spindle

Condition: not inspected (used), Year of construction: 1995, turning diameter over cross slide: 120 mm, spindle bore: 30 mm, turning diameter: 180 mm, center width: 140 mm, Fanuc OT Gsdpex Tucyjfx Admoil 8-position turret Swing over bed diameter: 180 mm

Condition: used, MOSTANA STANKO 1M65-5 HEAVY DUTY CENTRE LATHE MAKE MOSTANA STANKO, MADE IN USSR MODEL 1M65-5 YEAR MID 80s SWING OVER BED 1000.0 mm SWING OVER SADDLE 650.0 mm CHUCK SIZE 1000.0 mm SPINDLE BORE 135.0 mm SPINDLE SPEEDS 5- 500 RPM SPINDLE POWER 22 Kw PLUS POWER FEED TO THE SADDLE Giodpfx Asx Dmi Dedmjl METRIS AND ENGLISH SCREW CUTTING 1000.0MM 4 JAW CHUCK 2 AXIS DIGITAL READOUT CLEAN BED WORKED ON COMPOSITE, NO METAL

Condition: used, Year of construction: 1989, Technical details: Giodpsx Hgkcefx Admel number of spindles: 6 spindle passage: 20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Gildemeister Type: GS20-6 Yob: 1989 six-spindle automatic lathe 8 main spindles for bars up to D=20mm All cross units are equipped with a tool holder (from Gildemeister or IMG Attachments) All longitudinal units are equipped, either fixed or rotating (without collets) A gear set for one speed is installed A gear set for one cycle time is installed The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, functionality: fully functional, Item: DP-0601-Pump APV W+30/80 APV - Centrifugal pump Brand: APV/SPX Type: W+30/80-3220 130 Godpfxsx Tuu As Admjil Motor: 4.0 kW Speed: 2860 rpm Year: 1997 Inlet: 4" / Outlet: 3"

Condition: good (used), Year of construction: 1988, turning diameter over cross slide: 900 mm, spindle bore: 105 mm, turning diameter: 1,200 mm, turning length: 5,000 mm, total length: 8,000 mm, total width: 1,800 mm, total height: 1,550 mm, bed width: 650 mm, workpiece weight (max.): 10,500 kg, Motorized tailstock CE-Chuck cover protection Telescopic guide cover over guideways Steady rest  4 chuck 1000 mm diameter Gisdpfx Ajwrxpbsdmel 3 chuck 500   mm diameter   2 Axis digital read out system DBC Turning Length: 5000mm Swing over bed Ø: 1150mm Swing over cross slide Ø:850mm Spindle bore: 105mm Bed width: 650mm Tailstock spindle Ø: 140Ø Stroke pinole: 300mm Spindle taper: 6Mk Speeds / ranges: 4,5 - 900Rpm Workpiece load: 8000 Length: 8000mm Width: 1800mm Height: 1550mm Weight: 13800kg

Condition: good (used), Year of construction: 2014, 780mm Swing, 630mm Swing over the Cross-Slide, 481mm Max Cutting Diameter, 790mm max cutting length, 12 Station Turret, 76mm bar capacity, 3500rpm, Gjdpox Eluwofx Admoil 22kW Spindle, Fanuc Oi, Tool setter, 10” 3 jaw chuck, Low Volt Light, Tailstock, Swarf Conveyor, Coolant.

Condition: excellent (used), Year of construction: 2006, operating hours: 500 h, functionality: fully functional, machine/vehicle number: RM140, total height: 2,441 mm, total width: 2,175 mm, total length: 6,500 mm, type of input current: three-phase, overall weight: 10,500 kg, input voltage: 380 V, year of last overhaul: 2025, power: 12 kW (16.32 HP), product height (max.): 330 mm, product length (max.): 90 mm, Bottle washer with a capacity of 4,500 bottles per hour. Refurbished in 2022 by the manufacturer (PAC). Only a few operating hours since then (500h). Option to purchase the complete line: washer, air blower (bottle drying), boiler, conveyors. Gedox R Tv Hspfx Admsil

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details swing over bed 730 mm centre distance 3000 mm control Heidenhain MANUALplus4110 weight of the machine ca. 6,5 t dimensions of the machine ca. 7400 x 2100 mm Additional information Very well-maintained cycle lathe with only 15652 operating hours. Working area: Center distance 3000 mm Swing diameter over bed 730 mm Swing diameter over cross slide 450 mm Bed width 480 mm Main spindle: Spindle mount according to DIN 55027 size 11 Spindle bore 130 mm Spindle diameter at front bearing 170 mm Spindle taper 1:20 Tap in center sleeve MT 6 Main drive: AC drive with 2-stage ZF gearbox (automatic shifting gearbox) Drive power (100/60% duty cycle) 22/28 kW Total speed range 1 - 2200 rpm Maximum spindle torque: approx. 2200 Nm X-axis (cross slide) performance data: Maximum travel: 400 mm Feed force: 14 kN Speed: 4 m/min Z-axis (bed slide) performance data: Feed force: 18 kN Speed: 7 m/min Max. workpiece weight: Between centers without steady rest: 2000 kg With one steady rest: 2200 kg With two steady rests: 2500 kg In the chuck: 750 kg Tailstock: Quad diameter: 115 mm Quad stroke: 225 mm Quad taper: MK 6 Equipment and accessories: Heidenhain MANUALplus 4110 CNC control SCHUNK ROTASplus 400-102 3-jaw manual chuck 2 steady rests PARAT tool holder Chip conveyor Coolant system Giedpfx Ajx S Ehdjdmel Work area enclosure with two sliding doors. Machine length 5700 mm, with swarf converyor 7400 mm Machine width 2100 mm

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 986U042310279, Size B2, water-based coating unit for digital finishing, corona unit, high capacity feeder, high capacity stacker. Machine can be installed inline with an HP Indigo 12000 or 15000. Gedpfox Apdnsx Admeil

Condition: good (used), Year of construction: 2008, turning length: 2,000 mm, feed rate X-axis: 3,000 m/min, feed rate Z-axis: 3,000 m/min, HeidenHain ND780 3 Axis dro Variomatic RPM speedrange  Steady rest Multi fix Tool system DBC Turning Length: 2000mm Swing over bed Ø: 830mm Swing over cross slide Ø:420mm Swing in the gap Ø: 1000mm Gap length: 295mm Spindle bore: 110mm Bed width: 560mm Tailstock spindle Ø: 105Ø Stroke pinole: 225mm Spindle taper: 6Mk Power: 15kW Speeds / ranges: 2000Rpm Feed rate X-Axis: 3000mm/min. Feed rate Z-Axis: 3000mm/min. Workpiece load: 2400 Length: 3700mm Gisdpjxf Ey Rsfx Admjl Width: 1900mm Height: 1900mm Weight: 5500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2016, 300mm turning diameter, 510mm turning length, Y axis +/- 52.5mm, 600mm swing, 65mm bar capacity, spindle speed 4,500rpm , 16 station turret, 15kW spindle motor, milling 6000rpm, C axis 0.001 degrees, sub-spindle speed 6,000rpm, Y axis +/- 52.5mm, Doosan FANUC-i control, Giodsx Elr Aopfx Admol tailstock, coolant, tool setter, parts catcher, 3 jaw chuck,low volt light

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at Giedex S Efpspfx Admjl the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: good (used), Year of construction: 2004, CNC lathe IRLE - IWDS 1000 CNC MACH-ID 7758 Make: IRLE Type: IWDS 1000 CNC Control: SIEMENS 840D Year: 2004 Double carriage with 4 position revolver and 840D Siemens Steady rest 200 - 1090 mm Roller rest 860 - 1090 mm 4 chuck 1350 mm Clamping from 200 - 1100 mm Bed width 2000 mm Gedepdp N Iepfx Admsil Stoke X Axis 950 mm Stroke Z Axis 14900 mm Specifications Metric US Standard Swing over bed Ø 1400 mm Swing over cross slide Ø 1100 mm DBC Turning Length 13000 mm Spindle power 129 kW Workpiece weight 20000 Speeds / ranges 1 - 300 Rpm Feed rate X-Axis 4500 mm/min. Feed rate Z-Axis 4500 mm/min. Dimensions (Estimate) Length 20000 mm Width 3380 mm Height 2200 mm Weight 100000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2019, 256mm maximum cutting diameter, 458mm max turned length, 4,800rpm spindle speed, 51mm bar capacity, 12 station VDI turret, Giedpfx Ajx D Uy Rodmol 16kW spindle motor, Hurco WinMax 5 Control, tailstock, tool setter, swarf conveyor

Condition: excellent (used), Year of construction: 2008, turning diameter over cross slide: 1,140 mm, turning length: 12,000 mm, turning diameter: 1,540 mm, spindle bore: 150 mm, CNC Lathe Giuseppa Gianna - GGH 1100/760 x 12.000 CNC 3 bed way construction Bed width 1100 mm 3 x C-Type Steady rest on lower base with in feed Gisdpfox Swmlsx Admol 2 x Fixed steady rest 300 - 800 mm with 5 ton 2 x Chip conveyor 4 Chuck 1000 mm Barafuldi 4 way turret head Swing over bed Ø: 1520mm Swing over cross slide Ø:1140mm DBC Turning Length: 12000mm Spindle bore: 150mm Spindle power: 80kW Bed width: 1100mm Tailstock spindle Ø: 6Ø Workpiece weight: 20000 Power: 80A Speeds / ranges: 0-800Rpm Feed rate X-Axis: 0-8000mm/min. Feed rate Z-Axis: 0-8000mm/min. Length: 23000mm Width: 7600mm Height: 3800mm Weight: 58000kg

Condition: excellent (used), Year of construction: 2021, turning diameter over cross slide: 840 mm, turning length: 6,000 mm, spindle bore: 105 mm, rapid traverse X-axis: 5,000 m/min, rapid traverse Y-axis: 7,000 m/min, 3 chuck SCHUNK ROTA-S Plus 500-102 3 x Steady rest fixed Revolver VDI Duplomatic Siemens 840 DSL This type of lathe is commonly used in industries like: Oil & gas (pipe threading, tool joints) Gjdox Sqaxepfx Admjil Steel industry (roll turning)  Power generation (turbine shaft turning)  Heavy machinery manufacturing DBC Turning Length: 6000mm Swing over bed Ø: 840mm Swing over cross slide Ø:570mm Spindle bore: 105mm Spindle power: 33kW Bed width: 450mm Tailstock spindle Ø: 220Ø Spindle taper: 5Mk Speeds / ranges: 1200Rpm Feed rate X-Axis: 5000mm/min. Feed rate Z-Axis: 7000mm/min. Workpiece load: 2500 Length: 9500mm Width: 2300mm Height: 2300mm Weight: 8600kg

Condition: excellent (used), Year of construction: 2006, turning length: 365 mm, spindle motor power: 10 W, travel distance X-axis: 160 mm, SCHUNCK 160 mm chuck with jaws Full C-Axis 360.000 Driven Live tooling Part catcher Tooling package with 12 Tooling holders 3 x Live tooling AXIAL 3 x Live tooling RADIAL Collet device with inserts Cutting Hours 14.462 H Gisdpfx Aox R Szhedmel Max. turning Ø: 380mm X-Axis: 160mm Z-Axis: 365mm Spindle bore: 56/42mm Speedrange: 6000Rpm Spindle power: 10kW ATC / revolver: 12 Speed live tools:4000Rpm Power live tools:5kW Chip conveyor: Yes Pinole taper: 4Mk Stroke pinole: 100mm Quill Ø: 100mm Length: 3800mm Width: 1720mm Height: 1670mm Weight: 4000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!