Used Probe for sale (1,478)

Condition: good (used), Year of construction: 2018, Traverses X Y Z: 1,525 x 660 x 610mm, Dwedpfx Aaozh I Ebsxob Table 1675 x 660mm, table load 2,000 kgs, Spindle speed 12,000 rpm, input 18Kw, Hurco Winmax 5Control, Spindle taper Din 40, 30 ATC, Coolant, Low volt light, Swarf Conveyor, spindle probe

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 201502530269, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, table load: 560 kg, Equipment: documentation/manual, type plate available, ZEISS CONTURA G2 7/7/6 – VAST XXT TL1 Year of Manufacture: 2015 | Commissioned: 2016 | Immaculate Condition | Extremely Low Operating Hours We are offering for sale a ZEISS Contura G2 coordinate measuring machine (CMM) with a measuring range of 700 × 700 × 600 mm, equipped with a VAST XXT TL1 scanning probe head. The device comes from a controlled laboratory environment and was used exclusively on-demand, single-shift operation, never on a production line – resulting in exceptionally low actual usage and outstanding technical condition. 🔹 Basic Information Manufacturer: ZEISS Model: Contura G2 Measuring Range (X/Y/Z): 700 / 700 / 600 mm Year of Manufacture: 2015 Commissioned: 2016 Dwodpsyzmbdsfx Aaxsb Technical and Visual Condition: Perfect Measurement Error MPE (E0) = 1.7+L / 350 μm 🔹 Configuration and Accessories ✅ ZEISS VAST XXT TL1 active scanning probe head ✅ Stylus rack / magazine ✅ Set of measuring styli (mainly diameters ⌀ 0.6 mm and ⌀ 1.5 mm) ✅ Reference sphere ✅ BP26_SE control console 🔹 Usage History Device used exclusively in laboratory conditions Occasional, project-based (on-demand) use Single-shift operation, no serial or production work As a result, the machine exhibits extremely minimal mechanical wear 🔹 Service and Calibration ✅ Service and calibration exclusively by official ZEISS technicians ✅ Regular maintenance according to manufacturer guidelines ✅ No third-party interventions ✅ Device fully operational 🔹 Status 📍 Machine available immediately 🔍 Viewing possible 📄 Full documentation included ✅ Buyer arranges transport

Condition: used, Year of construction: 2023, operating hours: 259 h, functionality: fully functional, machine/vehicle number: 1200002, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, Like-new Haas VF-4-EU CNC vertical machining center with only 259 operating hours. The machine is in excellent optical and technical condition. The VF-4 is already fully prepared for 4-/5-axis operation from the factory – the extensive 5th-AXIS package is installed: - Axis cards for the 4th and 5th axes - Dynamic workpiece offset - Tool center point control - High-speed machining - Programmable coolant nozzle - Wireless Renishaw measuring probe and tool probe In addition, the machine is unusually well-equipped: - TSC – internal coolant supply with 21 bar - Spiral chip conveyor - Complete coolant maintenance package (automatic replenishment, oil separator, mist collector) - Fast 30+1 tool changer - Spindle with 10,000 rpm The control system is the current Haas Next Generation Control with touchscreen, WLAN, Ethernet, and HaasConnect remote monitoring. This makes the machine immediately ready for demanding machining tasks. The original transport securing devices are available. An original Haas tool cart for SK40 is also included. Inspection and demonstration under power are possible at any time by appointment. Loading and transport can be arranged. A suitable TRT-210 CNC rotary table is offered in a separate listing and can be included in the package if desired. The LANG base plates are not included in the scope of supply. Technical data: - Travel ranges X / Y / Z: 1,270 × 508 × 635 mm - Spindle nose to table: 107 – 742 mm - Table: 1,321 × 457 mm, 5 T-slots (16 mm), max. table load 1,588 kg - Spindle: 10,000 min⁻¹, BT/CT 40, inline direct drive, liquid-cooled - Drive power: 22.4 kW - Max. torque: 122 Nm at 2,000 min⁻¹ - Rapid traverse X / Y / Z: 25.4 m/min - Feed rate max.: 16.5 m/min - Tool changer: Side SMTC, 30+1 positions - Tool max. diameter / length / weight: 64 mm / 330 mm / 5.4 kg - Tool change time (chip-to-chip): approx. 3.6 s - Connection voltage: 400 V / 50 Hz, 3-phase (internal transformer installed) - Compressed air: approx. 113 l/min at 6.9 bar - Coolant tank: 208 l - Weight: approx. 6,260 kg (with conveyor) Control: - Haas Next Generation Control with touchscreen - 1 GB program memory, Ethernet + WLAN - HaasConnect (remote monitoring), HaasDrop (wireless file transfer) - M130 media display, safe run, synchronized thread drilling - Early detection module for power failure, overvoltage protection - Equipment / options (all installed from the factory) - 5-axis package VF-YT (4th + 5th axis drive-side prepared, DWO/TCPC, high-speed machining, programmable coolant nozzle) - Wireless Renishaw measuring probe system (intuitive) - TSC – internal coolant supply through the spindle, 21 bar Dwjdpfxjy Tp E Ae Aaxjb - Spiral chip conveyor - Coolant maintenance package (automatic replenishment, oil separator, mist collector) - Additional coolant filter (bag filter 25 µm) - Filter set for chip sump (200 µ) - Variable coolant flow (M-code controlled) - Blowing of the inside of the machine door - Lifting eyes, touchscreen, door lock

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: G551-1586, travel distance X-axis: 800 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 16,000 rpm, position of the milling head: Horizontal, table load: 1,000 kg, overall weight: 22 kg, input voltage: 400 V, Equipment: documentation/manual, GROB G550 / G551 5-axis machining center with TM167 tool magazine and Schuler LoadMaster LMC 900 Price upon request Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end-users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany or the EU • Inclusion of a dual-use statement in the purchase agreement (legally required) Sales/Transfer conditions: • Dismantling, removal, and transport are the responsibility of and at the risk of the buyer. • The buyer is responsible for personnel, tools, and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. Technical data Manufacturer: GROB-WERKE GmbH & Co. KG Model: G550 / G551-1586 Machine type: 5-axis universal machining center Year of construction: 2015 Control system: Siemens Sinumerik 840D Dwedpfxezxf Hks Aaxeb Axes: 5 Tool holder: HSK-A63 Spindle speed: 16,000 min⁻¹ Spindle power: 35 kW Spindle hours: approx. 19,125 h X-axis: 800 mm Y-axis: 770 mm Z-axis: 500 mm Measuring probe: Renishaw IKZ: 70 bar Tool management GROB TM167 additional tool magazine Year of construction: 2021 167 additional tool positions Total number of tool positions: 287 Fully integrated into the system Automation Schuler Automation LoadMaster LMC 900 Year of construction: 2015 Linear pallet changing system 9 pallet positions Beckhoff/TwinCAT control System is fully functional and ready for operation Condition The production cell is in good condition and has been in continuous operation. The machine has a relatively low number of spindle hours and is equipped with a TM167 additional magazine installed in 2021. According to the operator, there are no known defects. The system is ideally suited for the automated production of demanding 5-axis components in the following areas: Mechanical engineering Automotive industry Aerospace Medical technology Tool and mold making Scope of supply GROB G550 / G551 machining center GROB TM167 tool additional magazine Schuler LoadMaster LMC 900 9 pallets Documentation Inspection Inspection possible by appointment. The machine can be inspected while powered on. Location: Germany / Waiblingen If you are interested, we look forward to hearing from you so that we can discuss the further details. Keywords GROB G550, GROB G551, 5-axis machining center, Siemens 840D, TM167, tool magazine, Schuler LoadMaster, LMC900, pallet automation, HSK63, CNC machining center, 5 Axis Machining Center.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: V374C0020, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, nominal power (apparent): 31 kVA, torque: 197 Nm, controller manufacturer: Heidenhein, controller model: iTNC 530, workpiece weight (max.): 3,000 kg, table width: 1,000 mm, table length: 1,200 mm, table load: 3,000 kg, rotational speed (min.): 15,000 rpm, rotational speed (max.): 18,000 rpm, operating hours of spindle: 1 h, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, CNC Machining Centre – ZPS MCV 1220 – 5-Axis – 2018 Manufacturer: ZPS Model: MCV 1220 Year of manufacture: 2018 Condition: In production, fully operational Availability: Immediately Serial number: On request Machine location: Address visible Control System CNC control: Heidenhain TNC 350 Number of axes: 5 Working Area X-axis travel: 1200 mm Y-axis travel: 800 mm Z-axis travel: 600 mm Table size: 1200 × 1000 mm Max. table load: 3000 kg Spindle Spindle speed: 18,000 rpm Spindle power: 31 kW Tool interface: HSK 63 Coolant through spindle: Yes Tool Changer Number of tool stations: 40 Type: Chain-type tool magazine Equipment - Chip conveyor - Through-spindle coolant - Fully enclosed working area - Electronic handwheel - Renishaw measuring probe - Machine documentation Key Information - The machine is equipped with a fully refurbished CYTEC angle head with 0 operating hours. - Linear guides and carriages have been refurbished. - The complete machine geometry has been verified and recalibrated. - The machine is offered in operating condition. - Power-on test run possible at the seller's premises prior to purchase. - Disassembly and loading after payment to be arranged by the buyer. - Price includes tool holders, tools, and Renishaw probe. Dimensions & Weight Djdpfeymmd Usx Aaxowb On request

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 1,700 h, functionality: fully functional, machine/vehicle number: MP7/5/P, travel distance X-axis: 730 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, feed length X-axis: 585 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, spindle speed (min.): 1 rpm, spindle speed (max.): 42,000 rpm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 80 m/min, type of input current: three-phase, table load: 60 kg, workpiece weight (max.): 60 kg, overall weight: 8,000 kg, MP7-5 Axis with integrated pallet changer 5-axis with rotary/swivel axis Travel range X/Y/Z 585x250x400 mm Travel range B +/- 105 degrees Travel range C continuous Workpiece weight 60 kg Distance machine table to spindle nose 450 mm Machine dimensions (W x D x H) 2845 x 2370 x 3000 mm Machine weight 8000 kg Spindle speed 42,000 rpm Equipment: Control: Heidenhain TNC640 Main spindle: HVC140 HSK-E40 with rotary union for internal media supply - Max. speed 42,000 rpm - Milling power S1/S6 10 kW / 13 kW - For internal coolant supply, air and emulsion Oil mist extraction for oil/emulsion Dust extraction: L-CUT Machine-integrated workpiece changer for 36x EROWA ITS50 or 18x EROWA ITS115 Hand-held control unit with electronic handwheel and enabling switch Measuring probe system: Renishaw OMP400 Aerosol DRY LUBRICATION (ADL) - Precise dosage of media externally and through the tool Rotary table chuck: EROWA PowerChuck P on 5-axis Blum laser: LC50 Media distributor: MHT Tool changer 90 positions, HSK E40 Dsdpfx Aasxlctboxswb Warranty: 12 months Transport Initial commissioning on site Training

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,500 mm, measuring range Z-axis: 1,000 mm, Equipment: type plate available, For sale: Used Wenzel WP-KL coordinate measuring machine, year of manufacture 2007, in excellent condition and immediately ready for operation. This machine is ideally suited for quality assurance, toolmaking, and precision metrology applications. General Condition The machine is in very good technical and optical condition, professionally overhauled and modernized in 2022. On-site inspection is possible by appointment. Technical Data - Model: Wenzel WP-KL - Year of manufacture: 2007 - Serial number: LH075440 - Machine height incl. extended damper: 3,485 mm (retracted: 3,470 mm) Measuring Range & Accuracy - Measuring range (X/Y/Z): 1200 × 2500 × 1000 mm - Accuracy (MPE E): 2.6 + (L/300) Equipment - CNC control: WPC, 3-axis - Probe system: Renishaw PH10M - Scanning probe: Renishaw SP25 with scanning kit 2 (probe stylus lengths 50–100 mm) - Probe changer rack: Renishaw FCR25 with 3 ports, empty PC System & Software - PC system with Windows 10 Professional - 2 × 24" TFT monitors - WM QUARTIS CNC geometry software – Version 2025 - WM QUARTIS CNC freeform surface applications – Version 2025 - WM QUARTIS CNC CAD import interface (STEP) – Version 2025 - USB user dongle with software license Accessories (included) - Small M3 stylus kit - Reference sphere - PC and controller trolley with integrated desk Dodox H Tqiopfx Aaxswb - Ergonomic hand control panel HT400 If interested or if you have any questions, feel free to contact us! Price: €85,000 net, negotiable for quick completion. All information provided to the best of our knowledge and belief. Subject to change, error, and prior sale.

Condition: good (used), Year of construction: 2000, operating hours: 48,804 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, total length: 7,000 mm, total width: 5,000 mm, table width: 400 mm, table length: 500 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 23,574 h, coolant supply: 50 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained 4-axis machining center from precision manufacturing. The machine has been serviced regularly, is immediately ready for operation, and comes with a pallet changer and extensive accessories. Ideally suited for tool and mold making or series production. Technical Specifications -Travel distances: X 600 mm / Y 560 mm / Z 560 mm -B-axis: 360° x 0.001° (60 rpm) -Spindle speed: 0 – 8000 rpm (stepless) -Control: Siemens Sinumerik 840D -Table size: 6 pallets, each 500 x 400 mm -Table load: 350 kg -Working feed: 1 – 60,000 mm/min -Rapid traverse: 60 m/min Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 90 positions -Max. tool diameter: 80 mm -Max. tool length: 350 mm -Max. tool weight: 10 kg -Max. total magazine weight: 450 kg -Tool change time: 5 sec -Pallet change time: 6 sec Machine Requirements & Dimensions Dwodpfjx Icyvsx Aaxsb -Motor power: 13 kW / 20 kW -Torque: 124 / 191 Nm -Total power requirement: 20 kW -Machine weight: approx. 16,000 kg -Required floor space (LxW): 7 x 5 m Equipment & Accessories -Coolant system approx. 1100 L (internal & external) -Knoll cooling unit with drum filter (30/40/50 bar via M-command) -Chip conveyor -Tool measurement: Renishaw probe -Tool breakage detection in the machining area -Pallet storage (4 positions) -Pallet sequence operation -Enclosed work area in accordance with UVV -Network capability -Technical documentation & installation layout available Components Renewed -Hydraulic system motor & pump replaced -Some hydraulic and pneumatic hoses replaced -Control cabinet LT module exchanged -Drum of Knoll system replaced Operating Hours / Run Times - Power-on hours approx. 48,804 h (counter runs when the machine is switched on, including during setup, maintenance, or idle times) - Spindle run time total 23,574 h Special Features - Machine live, immediately ready for use - Inspection possible any time by appointment - No dealer sale – machine comes directly from production - Technically inspected, no known defects - Assistance with disassembly, loading, and transport possible (for an additional charge) All information has been provided to the best of our knowledge and belief. Subject to alterations, errors, and prior sale.

Condition: good (used), Year of construction: 2016, Travel ranges X / Y / Z: 750 / 600 / 520 mm B-axis (swiveling): -10° / +95° C-axis (rotating): 360° Clamping surface of table: 800 × 620 mm Table load, max.: 350 kg Spindle speed: 12,000 min⁻¹ Spindle power / torque: 13 kW · 83 Nm (40 % duty cycle) Tool holder: SK 40 / BT 40 Tool magazine: 32 positions, chain type Rapid traverse rate X / Y / Z: 24 m/min Connection value: 32 kVA · 50 A Machine weight: 7,800 kg - Rotary/swivel table with B/C axes, both axes hydraulically clamped — 5-axis machining in a single setup Dwjdpfx Aozy Uvdoaxob (3+2 axes indexed, no simultaneous machining) - Heidenhain TNC 620 — the best available operator interface on the market - Chain magazine with 32 × SK 40, tool diameter up to 130 mm (300 mm with free spaces), tool weight up to 6 kg - Internal and external coolant supply - Tool measurement system in the machine - Workpiece probe from DMG MORI - Chip conveyor, coolant system with solid particle filtration - 3D quickSET kinematic measuring system in a case — this allows the swivel axes to be checked and recalibrated without a service technician - Complete original documentation: operating manual, technical manual, transport and installation instructions, spare parts catalog, electrical overall documentation The main spindle was renewed in May 2026, and the X-axis in 2025. Thus, the two most expensive wear parts of the machine are as good as new — regardless of the operating hour counter reading. Machine operating time: approx. 16,600 hours Machining time: approx. 6,900 hours Machine price without the shown accessories (extensive accessories can be purchased separately) Errors and prior sale excepted. The machine can be inspected under power with short notice.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, workpiece width (max.): 1,200 mm, number of slots in tool magazine: 6, overall weight: 2,500 kg, Vertical drilling, routing and grooving CNC machine ideall for furniture production. Model: Morbidelli CX210 Manufacturer: SCM Group Production year: 2021 State: very good Weight: 2.560 kg Panel´s working dimensions: - min. dimensions: 200 x 50 x 8 mm - max. dimensions: 3.050 x 1.300 x 95 mm 3 axis electrospindle + 6 pos. toolchanger - tool attachement: HSK 63F Dwedszutgwjpfx Aaxeb - RPM: 1.500 - 24.000 /min. - power: 6,6 kW Drilling head F31LTC (RO.AX) - vertical spindles: 21 pcs - horizontal spindles: 3+3 in X, 2+2 in Y - 1x saw blade in X - 1x drilling head for hinges 45/9,5mm (can be changed for different type) Other equipment: - control panel Eye-M with touchschreen (21"), Windows 10 - 2 independent clamps - 3D probe for detection of precize panel´s dimensions (length, width, thickness) - control PC - Maestro Active + Maestro CNC - remote controller - automatic lubrication Machine availability: September 2026 It is possible to see the machine in run.

Condition: excellent (used), Year of construction: 2004, Year 2004 With 8 station Fastem pallet loading system with tombs Tooling & manuals 12,000rpm Dwsdpfjzxr Twox Aaxeb 40 ATC DIN40 / Renishaw probing Pallet size 400mm x 400mm

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC machining center Matec 40 HV Control system: Heidenhain iTNC530 Year of manufacture: 2013 Internal machine number: 44 Location: Netherlands Travel distances: X-axis: 4,000 mm Y-axis: 1,200 mm Z-axis: 1,300 mm (horizontal) A-axis: 0-135° B-axis: +-106° NC rotary table: 1,250 mm with 50 rpm Clearance diameter: 1,600 mm, 50 rpm with torque drive Tool magazine: 60 positions Tool holder: HSK 100 Motor spindle: 15,000 rpm / 90 kW Accessories - Chip conveyor Dodpfx Aaszxp Dtexewb - 5-axis simultaneous operation package - Last major maintenance in 2023 - Extraction system - Internal cooling system 70 bar - 3D measuring probe with wireless connection - Tool breakage monitoring - Handwheel with wireless control HR 550 FS

Condition: used, Year of construction: 2006, operating hours: 45,559 h, functionality: fully functional, machine/vehicle number: 183519, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, workpiece length (max.): 1,000 mm, workpiece width (max.): 800 mm, overall weight: 11,350 kg, - Year of manufacture: 2006 - Worktable: pallet size 500 x 500 mm - Workpiece dimensions: max. 800 x 1000 mm Dedpfx Aeylh R Teaxowb - Travels: X 730 mm / Y 730 mm / Z 740 mm - Spindle diameter: 215 mm - Control: Mazatrol PC Fusion CNC 640M - Feed rate: 1 – 60,000 mm/min - Rapid traverse (X, Y, Z): max. 60 m/min - Speed range (2 steps): 35 – 12,000 rpm - Internal coolant supply – 70 bar - Renishaw measuring probe - Chip conveyor - Tool magazine: equipped with 160 slots + approx. 60 additional tools - Palletech high-bay system: 16 pallets + 2 loading stations - Machine hours: 45,559 h - Machine weight: approx. 11,350 kg - Serial no. 183519 Net price excluding dismantling and unloaded ex-works Luckenwalde (Germany), without transport

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 1067mm x 610mm x 610mm, Table size 1270mm x 610mm, 600mm C axis Table (360 degrees) +/- 90-degree head (B axis), Dedpozh Nczsfx Aaxowb 37kW Spindle Motor, 40 station side arm ATC, din 40 spindle taper, 12,000rpm spindle, Hurco Winmax 5 control, through spindle coolant, swarf conveyor, spindle probe.

Year of construction: 2024, condition: used, functionality: fully functional, The iCombi Classic is the latest combination steamer from RATIONAL. The iCombi Classic 20-1/1E model is a true all-rounder and will quickly become an indispensable helper in your kitchen. It replaces numerous conventional cooking appliances and is robust, powerful, efficient, and high-performing. The appliance offers space for 20x1/1 GN containers. The combination steamer has been fully refurbished in our in-house workshop and is therefore fully functional and free of defects. It comes with a 6-month warranty on all electrical components. These are sample photos of an identical model series in comparable used condition; actual photos will follow shortly. Request your best price. The MSRP is €21,940 net. The appliance is available from approximately week 38. You will receive an invoice with VAT shown. Our equipment service for you: •6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs •High-quality branded equipment at fair prices •Professional and competent advice – before and after the purchase •Free shipping within Germany (excluding islands/mountain stations) •Provision of operating instructions, connection diagrams & spare parts •Trade-in of your combination steamer from model year 2004 onwards •Complete range of accessories at attractive prices Condition: Used, inspected, and fully functional Technical data: •W x D x H: 877 x 913 x 1872 mm •Power connection: V: 400 / Hz: 50-60 •Electrical power: kW: 37.2 •Weight: 246 kg •Capacity: 20x1/1 GN •Serial number: E21MJ24083162984 •Year of manufacture: 2024 Special features: •ClimaPlus – the active climate management system: humidity in the cooking chamber is continuously measured and adjusted for optimal cooking quality with low energy consumption / humidity is adjustable in 10% steps for precise manual cooking •3 operating modes: steam, hot air, combination – automatic cleaning and maintenance system for cooking chamber and steam generator Additional information: •Control knob for operating modes, temperature, core temperature, and time settings •Acoustic and visual signal for necessary user interventions •4.3-inch TFT color display with softkeys •HACCP data memory and output via USB •Temperature display adjustable in C° or °F, display of target and actual values •Active climate management in the cooking chamber ClimaPlus •100 individually adjustable cooking programs with up to 12 steps each •Program steps can be adjusted during operation •High-performance fresh steam generator for optimal steam performance even below 100°C •5 programmable fan speeds •LED lighting with strong, neutral light in the cooking chamber •Integrated, maintenance-free grease separation system without additional grease filter •Cool-down function: rapid cooling of the cooking chamber •Delta-T cooking for particularly gentle preparation Dodjzy Uvwspfx Aaxowb •Automatic adjustment to the installation location •Removable, pivoting hanging racks •USB interface for transferring settings to other cooking systems •Material inside and outside made of stainless steel DIN 1.4301 •Core temperature probe with 1-point measurement integrated •Protected against spray and jet water IPX5 Shipping: •Delivery or self-collection by arrangement •Worldwide shipping on request •Shipping to islands or mountain stations only by arrangement Subject to changes and errors.

Condition: excellent (used), Year of construction: 2011, operating hours: 2,450 h, travel distance X-axis: 6,000 mm, travel distance Y-axis: 12,001,400 mm, travel distance Z-axis: 18,001,790 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 3,000 kg, total height: 4,700 mm, total length: 12,700 mm, total width: 7,800 mm, rotary table diameter: 2,200 mm, rotational speed (max.): 200 rpm, overall weight: 57,000 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 2,450 h, coolant supply: 40 bar, number of slots in tool magazine: 60, tool length: 460 mm, Equipment: chip conveyor, documentation/manual, CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 6000 Y-axis travel mm: 1200/1400 Z-axis travel mm: 1800 (H) / 1790 (V) C-axis degrees: 360º (0,001) A-axis degrees: ±180° B-axis degrees: ±180° Rapid traverse m/min: 30 Worktable Dwedjzb H Tfopfx Aaxob Table dimensions mm: 6000x1235 Milling/turning table nc: Table dimensions mm: Ø2200 Max. workpiece weight kg: 3000 Table rotation speed rpm: 200 max. torque Nm: 4600 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 33/24 (40%ED/cont) Spindle torque Nm: 382/278 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 With free neighboring places mm: 200 With occupied neighboring places mm: 104 Max. Tool Length mm: 460 Max tool weight kg: 25 Chip-to-chip time s: 9.8 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Workarea light DXF import function Paper band filter Automatic door Indexing Head Set Up for Shaft Machining Axles can be hydraulically locked using the M function Machine running times Under power: 29447 Spindle Working: 2450 Basic machine dimensions / weight Length mm: 12700 Width mm: 7800 Height mm: 4700 Weight kg: 57000

Condition: excellent (used), Year of construction: 2007, operating hours: 7,576 h, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 255 mm, table length: 885 mm, table width: 320 mm, overall weight: 2,500 kg, table load: 250 kg, Fehlmann Picomax 55 CNC 2/3 Milling Machine The machine is fully functional and in very good technical condition. We purchased it a year ago from a company that owned it from new and always serviced it at the official Fehlmann service center. Dwjdpfxoyzt Abs Aaxsb We are selling it solely because we do not have enough SF32 tool holders. Control: Heidenhain 530. The machine is equipped with a measuring probe. Axis travels: X: 500 mm Y: 255 mm Z (manual quill): 160 mm Z (programmable quill): 147 mm W axis: 500 mm Table surface: 885 x 320 mm Spindle speed range: 50 – 9,000 rpm Tool holder: SF32 Table load: max. 250 kg Spindle power (S6, 40%): 9.9 kW Machine weight: approx. 2,500 kg Dimensions (L x W x H): 1,900 x 1,900 x 2,300 mm The machine is in very good condition and the spindle has less than 10,000 operating hours.

Condition: excellent (used), Year of construction: 2013, FEELER VB-1650 CNC Vertical Machining Centre Control FANUC 31i-TB Year 2013 Table size 800 x 1900 mm Travels XYZ 1650 x 800 x 700 mm Spindle nose to table 145-845mm Spindle centre to column 850mm Spindle speeds to 8000 rpm Spindle taper BT 40 Spindle motor 26 kW Number of tools 30 ATC Rapid traverse X & Y 20 m/min, Z 18 m/min Weight 13000 kg Supplied wtith: Part probing, BLUM tool probe, Swarf Augers, Swarf conveyor, Spindle chiller, Filtermist FX7002. Tooling Package. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #27002 Machine Serial Number: VHE133 Cost: £39,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Dsdpfszd Dfijx Aaxswb

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Dwsdpfxoxm Sxvo Aaxeb Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: excellent (used), Year of construction: 2013, operating hours: 20,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Siemens, controller model: 840 D-SL, rotational speed (max.): 16,000 rpm, coolant supply: 50 bar, number of slots in tool magazine: 240, Equipment: chip conveyor, documentation/manual, Heller FP 4000 + SCHULER LoadMaster Compact Year of manufacture: 2013 Control system: Siemens 840 D SL Operating hours: approx. 40,000 h Spindle hours: approx. 20,000 h Spindle: SCU 63 unit, 16,000 1/min, 40 kW, 80 Nm X-axis: 800 mm, Y-axis: 800 mm, Z-axis: 1000 mm 4th axis (table/C-axis): NC rotary table, pallet size 500 x 630 mm 5th axis (head/B-axis): Swivel milling head (swivel range approx. +15° to -105°) Dedoztmhlopfx Aaxewb Rotary table: 360,000° x 0.001° Power dynamic: 60 m/min 2x pallets GRM with DIN hole pattern Tool holder: HSK 63 A Wireless measuring probe, manufacturer: RENISHAW Tool magazine: 240 positions (chain type) PMS multiple clamping Chip conveyor for wet machining - Monitoring + collision detection Fast drill breakage detection NC rotary table Special design KMA Interface for extraction system Schuler Loadmaster Compact: LMC 900/FP4000 19x additional pallets with DIN hole pattern Siemens control system Available very soon Loading and disassembly possible

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 15995729164, spindle speed (min.): 24,000 rpm, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, overall weight: 3,400 kg, controller manufacturer: Siemens, controller model: 840D, workpiece length (max.): 2,340 mm, workpiece width (max.): 1,650 mm, workpiece height (max.): 2,500 mm, 2013 DMG Mill Tap 700 Made in Germany. Equipped with below options 24000rpm spindle, 25 tool station (5th Axis) LEHMANN EA-507 CNC Rotary Table Production package TSC 20bar Chip conveyor Renishaw probe OMP 60 + OTS tool setter Main Spindle needs repair Dwjdszmggnepfx Aaxjb Technical Specifications Year of Manufacture: 2013 Control Unit: Siemens 840D Solution line X-Axis Travel: 700 mm Y-Axis Travel: 420 mm Z-Axis Travel: 380 mm Table Size: 840 x 420 mm (Max load: 400 kg) Spindle Taper: BT 30 / BBT 30Spindle Speed: 24,000 rpm Tool Changer (ATC): 25-station pick-up system Rapid Traverse (X/Y/Z): 60 / 60 / 60 m/min Machine Weight: Approx. 3,400 kg Overall Dimensions: 1,650 x 2,340 x 2,500 mm Included Accessories / Equipment pL LEHMANN EA-507 CNC Rotary Table (5th Axis) with complete cabling/integration.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, 5-axis machining center Hedelius ACURA 65 Control system: TNC 640 Year of manufacture: 2017 Internal machine number: 72 Travel ranges: X-axis: 700 mm Y-axis H / V: 650 / 465 mm Z-axis: 600 mm Dwjdpfx Aaozwuq Njxeb Rotary tilting table: Ø 650 x 540 mm Tilting range: +30° to -115° Interference circle diameter: Ø 700 mm Table load: 500 kg Tool holder: DIN 69893-1 HSK-A63 Tool magazine: 65 stations Spindle speed: 50 - 18,000 rpm ZeroClamp, 4-fold 3D measuring probe M&H 25.50 5-axis simultaneous machining ACURA Handheld control unit HR 250 3D mold making alignment ACURA KinematicsOpt TNC640 Collision monitoring ACURA/TNC Compressed air at the spindle head Coolant system 1250l, 25 bar Chip conveyor Exhaust filter Laser light curtain for tools ACURA

Condition: used, Year of construction: 2008, functionality: unexamined, power: 25 kW (33.99 HP), type of input current: three-phase, temperature: 200 °C, total length: 1,630 mm, total width: 1,700 mm, total height: 2,950 mm, overall weight: 1,650 kg, number of chambers: 1, control type: PLC-controlled, fuel type: electric, We offer a used Nabertherm N 150/03 CDB, manufactured in 2008. This is a furnace for the catalytic removal of adhesive residue from parts coated using the metal or ceramic powder injection method. The binder contained in the load undergoes chemical decomposition using nitric acid and is removed in the form of a gas. Model: N 150/03 CDB Serial number: 199905 Year of manufacture: 2008 Maximum temperature: 200 °C Rated voltage: 400 V 3/N/PE ~ Frequency: 50/60 Hz Current: 50/23/26 A Power: 22.4 kW TECHNICAL DATA: ✅ Capacity: 150 l ✅ Maximum temperature: 200°C ✅ Chamber dimensions: 450x450x750 mm ✅ Overall dimensions: 1625x1930x2850 mm ✅ Total power: 25 kW ✅ Catalyst, programmable, historical curve tracking, nitric acid pump EQUIPMENT: ✅ Monitoring of nitric acid flow via a probe ✅ API control Dodpezp Hfpjfx Aaxewb ✅ Siemens S7-300 If you have any questions or require additional information, please send a message or contact us by phone.

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. Dsdpfx Aozcf Dleaxswb First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller model: HEIDENHAIN TNC 640 CELOS, rotational speed (min.): 20 rpm, rotational speed (max.): 10,000 rpm, DMG MORI DMF 360|11 linear – Traveling Column Milling Machine For sale is a DMG MORI DMF 360|11 linear with extensive equipment and a HEIDENHAIN TNC 640 / CELOS control system. Technical data Travel ranges X-axis: 3,600 mm Y-axis: 1,100 mm Z-axis: 900 mm Rapid traverse rate X/Y/Z: 80 / 60 / 60 m/min Linear drive in the X-axis Milling head / Spindle NC swivel milling head, B-axis Spindle speed: 20 – 10,000 rpm Spindle power: 44 / 32 kW Torque: 288 / 187 Nm Tool holder: SK50 / DIN ISO 7388-1-A50 Tool magazine 120 tool positions Chain magazine with dual gripper Mechanical setup aid for tool loading Work table Fixed table with integrated rotary table Dsdezv Eglopfx Aaxewb Rotary table: Ø 1,050 mm Rotary table arranged on the left side Max. load capacity of rotary table: 1,200 kg Hydraulic clamping Control system HEIDENHAIN TNC 640 CELOS 21.5" ERGOline® Control Multi-touch screen Equipment / Options Internal coolant supply 40 bar / 980 l Paper band filter Chip conveyor HEIDENHAIN TS 460 infrared measuring probe Preparation and software option for 3D quickSET MPC – Machine Protection Control Compressed air through the spindle center Oil and emulsion mist extraction system, 2 × 1,600 m³/h 2 rotating viewing windows Purge air for linear measuring systems Direct measuring systems Active cooling for main spindle and linear motor Automatic door drive Electronic handwheel IoTconnector Machine Data Connector (OPC UA / MTConnect / MQTT) NETservice Machine can be inspected by arrangement. Further information, photos and videos available on request.