Used Pressing Line for sale (21,385)

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Predpfx Aew Sgnkjkijc Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, stroke length: 200 mm, throat depth: 400 mm, operating speed: 21 mm/s, reverse speed: 200 mm/s, table height: 900 mm, oil tank capacity: 350 l, overall weight: 16,950 kg, total length: 5,370 mm, total width: 2,160 mm, total height: 3,275 mm, power: 37 kW (50.31 HP), input voltage: 380 V, input current: 80 A, input frequency: 50 Hz, pressing force: 220 t, clearance between the columns: 3,820 mm, distance table to ram: 400 mm, ram plate length: 4,270 mm, table length: 4,270 mm, table width: 120 mm, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake LVD EASYFORM-10 220/4270 Touch-B Year of manufacture: 2010 Serial number: 33189 Technical specifications Force: 2200kN Working length: 4270mm Distance between uprights: 3820mm Stroke: 200mm Distance table – ram: 400mm Gap: 400mm Turbo: PP5400 Approach speed: 120mm/s Working speed: 21mm/s Return speed: 200mm/s Weight: 16950 kg Motor: 37kW Oil capacity: 350 COMMAND CONTROL TOUCH-B • Table PP8170 V-axis Pjdpfjz Eqwlsx Akiorc • EFL 90/130 • Top tool clamping PP3090 – Wila • Back gauge X600 X’ R Z1 Z2 PP8096 • Safety: CE PP3580 – laser-safe • PP1115 manual front support: 2pcs • T-axis Heavy duty 200kg

Condition: used, Year of construction: 2015, Overview Traditional-method finishing line for cava, champagne and other sparkling wines, from riddling and neck freezing through disgorging, dosing, corking and wire hooding to capsuling, labelling and case sealing. The machines are rated between 1,800 and 2,500 bottles/h. Two stainless steel tanks complete the offer. The line is sold as a whole; the gyropalettes and the two tanks are also available separately. Technical data - Product: sparkling wine, traditional method (cava, champagne) - Capacity: 1,800 to 2,500 bottles/h depending on the machine - Bottle formats: Bordeaux and Burgundy/cava - Years of manufacture: 1987 to 2018 Pjdpfxsz E U D Ne Akiorc - Electrical supply: 380-400 V, 50 Hz Scope of Delivery - Gyropalettes | ADRESSES INDUSTRIE | 504 S | for 504-bottle metal cages or 500-bottle packs, approx. 6,000 bottles per batch, control cabinet | 1998 - Balancer manipulator | DALMEC | PARTNER PMC | pneumatic, max. load 80 kg, bottle gripper head, unloads the cages into the neck freezer | 2005 - Neck freezer | TALLERES URPINAS | G+20 B | glycol/brine bath at -25 °C, touch panel, 2.28 kW, 380 V, 2,000 bottles/h | 2005 - Disgorging and dosing monobloc | PERRIER | crown cap removal, ice plug ejection, expedition liqueur dosing and levelling, approx. 50,000 bottles since the last general overhaul, original manual, 2,500 bottles/h | 1987 - Corker | AROL | GEMINI F | natural cork (mushroom) corking, single head | 2015 - Wire hooder | Robino & Galandrino | VITTORIA T 1/1 JUNIOR | monobloc with the corker, wire hood plaque feeder, inclined long-duration wire hood magazine, touch panel, 400 V, 50 Hz, original manual, 2,000 bottles/h; cork feeding and sorting hopper available as an option | 2015 - Bottle turner / homogeniser | FORNS | continuous, mixes the expedition liqueur into the wine, 2,500 bottles/h | 1987 - Washing, drying and blowing tunnel | CAMES | WDT-1 | exterior washing, high-speed Sonic air knives, 400 V, 50 Hz, 700 kg | 2018 - Capsule applicator | C.M.A.R. | capsule distributor with pleating and smoothing heads | 2001 - Labelling machine | PRIMA INDUSTRIES | PLM 1500 | self-adhesive, 3 label stations plus neck collar, capsule orientation with spot and UV sensors, SICK photocells, star wheels for 75 mm (Bordeaux) and 89 mm (Burgundy/cava) bottles, 3 kW, 400 V, 1,800 bottles/h | 2018 - Case sealer | SIAT | SK2-S | top and bottom adhesive tape sealing, 380 V, 3-phase | 2015 - Tank with agitator | DECALSA INDUSTRIAL | 12,200 L, agitator, heating and cooling coils, control box | 1988 - Tank | MAGUSA | DPG | 10,000 L, AISI 304 | 2000 Condition Used, still installed and in production. Regularly maintained; most machines have had one owner since new. Availability Available now. Inspection possible. Location: Spain.

Condition: used, Year of construction: 1987, machine/vehicle number: 17251, Pressing force: 63 tons, with draw cushion and separate hydraulic unit. Prsdpfx Aoz Nhp Ijkijc

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 697/2, Equipment: 4th hydraulic function, Hounsell Engineering 50 Tonne 4-Column Hydraulic Press – 1997 We are pleased to offer this Hounsell Engineering Ltd (UK) 50-tonne 4-column hydraulic press, manufactured in 1997. A substantial, British-built industrial hydraulic press with heavy-duty construction, previously used in a production environment and now available for sale due to surplus requirements. Suitable for a wide range of pressing, forming, assembly, fabrication, maintenance and general engineering applications. Machine specification: Manufacturer: Hounsell Engineering Ltd, UK Type: 4-Column Hydraulic Press Rated capacity: 50 tonnes Year of manufacture: 1997 Machine / Serial No.: 697/2 Stroke: 200 mm System pressure: 250 bar Pump motor: 5.5 kW Electrical supply: 415 V Control voltage: 110 V Hydraulic fluid: Texaco HD 32 Construction: Heavy-duty industrial steel Condition: Very good used condition The press was in service prior to removal and is being offered for sale as surplus equipment. With a rated capacity of 50 tonnes, the machine is capable of generating approximately 500 kN of compressive force, making it suitable for a broad range of industrial and workshop applications. Condition & Inspection Pedpfoz Ib R Iox Akiorc The machine is offered in good used condition. Prospective purchasers are welcome and encouraged to inspect the press before purchase to satisfy themselves as to its condition, specification and suitability for their intended application. Sold as seen. No warranty is given or implied. Collection & Loading Location: Kent, England, UK Collection only due to the size and weight of the machine. Loading assistance may be available by prior arrangement. Further photographs and information can be provided, including serial plate details, overall dimensions, weight and loading arrangements. A good opportunity to acquire a substantial 50-tonne industrial hydraulic press at considerably below the cost of a comparable new machine. Please contact via the links within for further details, photographs, or to arrange an inspection. Many Thanks, Search terms: Hounsell Hydraulic Press, 50 Tonne Press, 4 Column Press, Hydraulic Workshop Press, Industrial Press, Engineering Machinery, Pressing Machine, Forming Press, Manufacturing Equipment, Fabrication Machinery.

Condition: as good as new (ex-display), Year of construction: 2026, Technical specifications: Laminated panel press from our showroom; Working area: width from 150 - 2,550 mm, height from 150 - 1,400 mm, depth from 150 - 700 mm; Variable pressure adjustment 300/700/1100/1400/1800/2200 dN (kg) of the side pressing beam; Pedpfxjb Eln Do Akiorc Variable pressure adjustment 500/800/1200/1500/1900/2200 dN (kg) of the top pressing beam. Simple operation via 6 separate push buttons, freely adjustable pre-selection of pressing time with automatic opening function, loading height 300 mm. The machine is in our showroom and can be delivered immediately. Location: available from our warehouse in 54634 Bitburg.

Condition: used, Year of construction: 2008, Manufacturer: COMEC Model: FUST-P-40 Year: 2008 Type: Semi-automatic filling line Containers: Drums, cans, off-centre-neck containers Max. container height: 500 mm Theoretical output: 200 x 20-litre containers per hour Dosing method: Weight-based, using a load cell Weighing range: 0.5 to 30 kg Accuracy: 10 g Calibration: Automatic Filling speeds: 2 (high flow rate / low flow rate within the same cycle) Filling spout: With anti-drip valve Conveying: Roller conveyor Capping: Manual placement, tightened using a hand-held pneumatic screwdriver Control: Control panel FAP-200/1 type feed unit - Filter (cylindrical coil): 500 microns Pjdpfxoz Ic Nfo Akijrc - Pneumatic diaphragm pump - Flow rate: 2 to 4 m³/h - Transport trolley Documentation: Available Video: On request

Condition: new, functionality: fully functional, mileage: 1,474 km, power: 243 kW (330.39 HP), first registration: 10/2025, fuel type: diesel, empty load weight: 10,310 kg, maximum load weight: 26,000 kg, tire size: 315/70 R22.5, axle configuration: 6x2, wheelbase: 5,600 mm, fuel: diesel, color: grey, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 8,180 mm, total width: 2,550 mm, total height: 3,050 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space length: 8,180 mm, loading space width: 2,550 mm, Year of construction: 2025, Equipment: full service history, non-smoking vehicle, This beautiful F-Line 6x2 is for sale at Ford Trucks Dealer Garage Marc Vansteenland! A robust and reliable truck, ready for a new owner. 📍 Available for viewing at Garage Marc Vansteenland 🔧 Ford Trucks Dealer Psdpfjz Iz D Usx Akiorc Interested? Feel free to contact us for more information or to schedule an appointment!

Condition: good (used), Year of construction: 1997, Used Beyeler press brake Type PR10 200 4100 Capacity 4100 x 200 tons Prsdpfx Asz H Udlekiec Cybelec CNC control Y1, Y2, X, R, Z1, and Z2 axes CNC-controlled Wila upper and lower clamping system Tools not included

Condition: good (used), Year of construction: 2018, functionality: fully functional, Baling press Presona LP 85 VH2, year of manufacture 2018 Technical data: Manufacturer Presona Sweden Type LP 85 VH2 Year of manufacture 2018 Drive power 2 x 45 kW Operating hours 40,350 Effective operating hours approx. 22,000 Pre-compression force 28 t Main compression force 85 t Infeed chute 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight 450 - 650 kg Theoretical volume output: 1200 cbm/h Throughput at 30-100 kg/cbm: 13-30 t/h Tying 5-strand vertical, (3-strand horizontal) Oil tank volume 2000 L Pjdez H I E Ajpfx Akisrc Transport dimensions press 10400 x 2400 x 2800 mm (L x W x H) Weight approx. 27,000 kg Materials: Paper, cardboard, PET bottles, films, light waste. Note: The press is in good condition. It was dismantled from ongoing operation. The horizontal tying is currently not functioning. The technical documentation is available. The following work has been carried out by us: New wear plates (Hardox) in the press channel Seals completely replaced on the main cylinder Oil filter changed Vertical tying system overhauled and made operational. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made with advance payment, ex works, without warranty. Our payment terms are 100% advance payment.

Condition: good (used), Year of construction: 2005, stroke length: 1,000 mm, throat depth: 400 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, overall weight: 9,650 kg, total length: 5,700 mm, total width: 1,800 mm, total height: 3,100 mm, power: 7.5 kW (10.20 HP), pressing force: 120 t, clearance between the columns: 2,550 mm, Equipment: documentation/manual, Press brake SAFAN - H-Brake 120TS1 MACH-ID 9820 Make: SAFAN Type: H-Brake 120TS1 Control: TS1 YOP: 2005 Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X/ Z1 / Z2 / R-Central Control: TS1 Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Height: 3100mm Weight: 9650kg Prsdpsz Hka Ajfx Akisc Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2016, operating hours: 1,828 h, functionality: fully functional, machine/vehicle number: 61700170, total width: 2,300 mm, total height: 3,300 mm, total length: 9,200 mm, overall weight: 10,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General information Year of manufacture: 2016 Operating hours: 1,828 h Serial number: 61700170 Color: Blue CE certificate available: No Documentation available: No MACHINE DETAILS Dimensions and weight Overall length: 9,200 mm Overall width: 2,300 mm Overall height: 3,300 mm Predpfx Aoz Ea Rbokisc Unladen weight: 10,000 kg Transport data Transport dimensions: 9,200 × 2,300 × 3,300 mm (L × W × H) Transport weight: 10,000 kg Transport packages: 3 pcs.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, 2 x Packing lines, previously used for salad leaf, consists of; 1 x Multipond MP-14-7100-2500-J plus infeed + gantry 1 x Multipond MP-14-3800-1250-J plus infeed + gantry 1 x VH Centurion SI440 (VFFS) with printer + label applicator 1 x GIC4100 (VFFS) with printer + label applicator 2 x Loma checkweigher + metal detector combination 2 x packing tables Podpfx Akjz Arlhjierc All machinery is fully working and ready to be decommissioned

Condition: good (used), Year of construction: 2003, functionality: fully functional, Voortman V603 / VB750 CNC Drilling / Sawing Line – Year 2003 Podpez Hd Sfsfx Akierc Three Spindle. 18 metres In-Feed. 13.5 metres Out-Feed. Pusher Unit Feed. In-Feed Cross Transfers. Out-Feed Cross Transfers. 750mm Section Capacity.

Year of construction: 2016, condition: good (used), for sale: Complete Niverplast packaging line Year of manufacture: 2016 1. Manual infeed Niverplast 2. Depanner for baguettes from AUXPAMA 3. Metal detector 4. Reject system 5. Counter + speedbatcher Niverplast 6. Combiplast Niverplast 7. Boxloader Niverplast 8. Varioseal Niverplast 9. Metal detector 10. Pallet sealing device 11. Conveyor systems Niverplast Full documentation, layout, and specifications available. If you have any questions or comments, please feel free to contact me. Inspection on site is also possible. Dismantling and transport can be offered. Kind regards, Leo Holland Pedpfx Ajx Ari Hokierc

Condition: reconditioned (used), functionality: fully functional, Press Brake Brand: HACO Capacity: 3000 x 135T Predpjyapdqefx Akijc Distance between uprights: 2600 mm Throat depth: 250 mm Ram stroke: 120 mm Opening: 325 mm Descent speed: 10 mm/s Working speed: 10 mm/s Return speed: 60 mm/s Table height: 915 mm Hydraulic power unit: 10 HP Without pit Supplied with AMADA PROMECAM tooling Backgauge with digital display Weight: 8T Equipped with new tooling

Condition: refurbished (used), functionality: fully functional, Year of construction: 1993, machine/vehicle number: 20658, stroke length: 250 mm, throat depth: 305 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table height: 980 mm, oil tank capacity: 350 l, overall weight: 22,500 kg, total length: 6,300 mm, total width: 2,300 mm, total height: 3,475 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, pressing force: 320 t, clearance between the columns: 3,760 mm, distance table to ram: 500 mm, ram plate length: 4,500 mm, table length: 4,800 mm, table width: 250 mm, type of input current: three-phase, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, Hydraulic press brake LVD PPI 320/40 S840W Year of manufacture: 1993 Psdpfozktg Aex Akisrc Year of refurbishment: 2026 Serial number: 20658 Technical specifications: Force: 3200 kN Working length: 4500 mm Distance between uprights: 3760 mm Stroke: 250 mm Distance table – ram: 500 mm Gap: 305 mm Table width: 250 mm Approach speed: 80 mm/s Working speed: 7 mm/s Return speed: 70 mm/s Weight: 22500 kg Motor: 22 kW Oil capacity: 350 l Dimensions (L x W x H): 6300 x 2300 x 3475 mm New 2026 S840W controller • S840W: 15” touch screen – Graphic controller with free online service assistance • Axes: Y1, Y2, X, V • V: CNC crowning table • 2 front supports • Hydraulic clamping of the top tool in LVD classic 15 tool holder Tooling included: E15 H150 78° L3000mm D15 H150 78° L4500mm F15 H150 26° L4500mm H15 H150 L2500mm R15 H150 78° L4500mm V20 H130 30° L3500mm V20 H130 78° L3000mm V40 H130 78° L4500mm V60 H130 78° L4500mm V90 H130 78° L2500mm M130 Multi-V L4500mm (90/40/24/16/10)

Condition: used, Year of construction: 1998, pressing force: 100 t, For sale is a used die-setting press from the manufacturer REIS with a maximum pressing force of 100 tons. The machine has a table size of 1,100 × 800 mm, a maximum installation height of 950 mm, and numerous features, including an ejector in the table, oil connection boxes for core pulls, and a 180° pivoting ram plate. It is therefore particularly suitable for die-setting operations, tool try-out, and testing in mold and tool making. ##### Technical Data + Information: Die-setting press – 100 tons – 1,100 × 800 mm ==== General Information - Design: 4-column die-setting press - Manufacturer: REIS - Type: TUS 80–100 - Year of construction: 1998 - Pressing force: 26–100 tons (adjustable) - Retraction force max.: 45 tons - Table size: 1,100 × 800 mm - Max. table load: 5,000 kg - Installation height max.: 950 mm - Overall dimensions (W x D x H): approx. 2,100 × 3,395 × 3,670 mm - Total weight: approx. 8,500 kg - T-slots: DIN 650 – 22 mm ==== Hydraulic Cylinder - Pressing force range: 26–100 tons - Retraction force: 45 tons ==== Hydraulics & Drive - Hydraulic pump: REXROTH SYDFE11x71RN0030CAM - Motor power: 7.5 kW - Working pressure max.: 200 bar - Pressure accuracy: ±5 bar - Tank volume: 200 l - Hydraulic oil: HLP 36 ==== Motion System - 180° pivoting ram plate - Load capacity of the pivoted ram plate: up to 3 tons - Ejector in the ram: 3.5 tons - Ejector stroke: 130 mm - Extendable table - Table can be tilted to both sides - Movable ejector in the table Prsdpfoxd Tiqsx Akioc - Oil connection boxes for core pulls - Injection molding filling device in the ram - Quick clamping plate on the ram ==== Control - Operation via control panel - Press force setting - Operation of core pulls - Control: Siemens / Pilz - Digital measuring device ==== Safety - Industrial machine control - Operator panel with safety functions ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connection power main motor: 7.5 kW - Total connection power: 10 kW ##### Application areas: Die-setting, tool try-out, mold making, tool making, injection molding tools, automotive, prototype construction, trial tools, maintenance, production preparation (Die-setting press, try-out press, tool try-out press, hydraulic press, REIS TUS 100, 100 ton press, 4-column press, testing press, mold making press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety standard NR 12, which is based on these. Our core strength lies in special machine construction and press automation. We distribute customized hydraulic presses at surprisingly favorable prices. For the hydraulics of the presses, components from leading European manufacturers are mainly used.

Condition: good (used), functionality: fully functional, Year of construction: 2015, bending force (max.): 230 t, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame in all-steel construction - Press beam, stress-relieved by annealing - Spherical mounting of the press beam with inclination - Electro-hydraulic upper drive with 4-cylinder technology - Generous bending clearance - Flat front covers - Modern block hydraulics - Electronic pressure gauge - Measuring system with glass scale and spring compensation - Hydraulic oil in the machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Back gauge system - Rear back gauge system, 2 axes, X and R axes - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool holder, manual clamping, hardened - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - Manual crowning Control system - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15-inch touch screen - Network capable - Teleservice via modem Operation - Control panel with LCD keypad and foot switch - Communication bus Pedpfoz Rl Nhjx Akijrc Safety - Standard safety devices

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, COLLIN Teach-Line CSG 171 T Strand Granulator For sale is a used COLLIN Teach-Line CSG 171 T strand granulator. This compact table-top machine is used to produce granules from round plastic or polymer strands. The previously extruded and cooled strands are fed in via a pair of infeed rollers and then granulated by a fixed counter-blade and a rotating impact blade. The infeed and cutting process can be easily observed through the transparent protective cover. The cutting gap between the rotor blade and the counter-blade can be precisely adjusted. The desired speed can be regulated on the control panel. Pjdpez Rmvvofx Akijrc Technical data: Manufacturer: Dr. Collin GmbH Model: Teach-Line CSG 171 T Year of manufacture: 2009 Machine number: 9310 31 09 Connected power: 0.5 kW Electrical connection: 230 V / 50 Hz Rated current according to nameplate: 6 A Dimensions: approx. 290 × 500 × 540 mm Weight: approx. 50 kg Equipment and features: Pair of infeed rollers Guide piece Fixed counter-blade Rotating impact blade Adjustable infeed speed Transparent protective cover Main and safety switch Compact design as a table-top machine Inspection possible by prior arrangement.

Condition: excellent (used), Year of construction: 2008, stroke length: 4,000 mm, throat depth: 400 mm, operating speed: 14 mm/s, reverse speed: 130 mm/s, overall weight: 23,000 kg, total length: 5,800 mm, total width: 2,300 mm, total height: 3,800 mm, power: 42 kW (57.10 HP), pressing force: 320 t, clearance between the columns: 3,150 mm, Make: LVD Type: PPEB-EFL 320/40 Control: CADMAN YOP: 2008 CNC Crowning Hydraulic tool clamping EFL Easy form laser measuring & correction system Set Tooling  Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Psdpoz Rmp Nsfx Akisrc Max. bending length: 4000mm Distance between column: 3150mm Max. pressing force: 320T Dis. Beam - Table: 570mm Beam stroke: 300mm Table Width: 200mm Troth beam: 400mm Approch speed: 120mm/min. Working speed: 14mm/min. Return speed: 130mm/min. Adjustment X-Axis back gauge:1000mm Control: CADMAN Power: 42kW Length: 5800mm Width: 2300mm Height: 3800mm Weight: 23000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 94,201 h, control type: CNC control, bending force (max.): 400 t, installation height: 595 mm, Bending length [mm] 3550 Pressing force [tons] 400 Control system Cybelec ModEva 10s Standard equipment: - Sturdy machine frame as a welded construction in all-steel design - Press beam with high bending strength - Electro-hydraulic upper drive via proportional valves Predpfx Aoz Rmcvjkisc - Modern block hydraulics - CNC rear stop for X and R axes, safe displacement of the stop fingers from the front by means of a safety interlock - Upper tool clamping system "EHT", manual, head width 26mm, load max. 3000 kN/m - Lower tool clamping system EHT, manual, clamping width 90mm for block tools and 13mm for single V-dies, without clamping - Control system: CYBELEC ModEva 10S on Windows, 2D graphic control with a 10.4" color screen - Control cabinet air conditioning + Rear stop - System 1, 5 axes, straight finger, 140mm wide, adjustment of R axis 150mm + EHT quick clamping device, for upper tools, pneumatic, head width 26mm, load max. 3000 kN/m (self-centering horizontally) + EHT lower tool clamping, pneumatic, clamping width 55mm + Hardened insert strip, for EHT lower tool clamping 55mm / 90mm + Lower tool displacement, CNC-controlled, infinitely adjustable via rear stop 1 (max. 4550 mm working length) + Crowning device CNC-controlled, in the table without tool clamping, load max. 3000 kN/m + Safety device LaserSafe (up to max. upper tool height 440mm) + Additional foot switch + Bending aid 1st arm, load max. 1500N with 2 integrated support strips in standard design + Bending aid 2nd arm, load max. 1500N with 2 integrated support strips in standard design + 2 pcs. support strips for a bending aid with T-slot 14mm and scale and ball rollers + 2 pcs. table extension for bending aid + Short park position left + Short park position right

Condition: used, Year of construction: 2016, Waste disposal system consisting of: 1 Clean air dust collector with briquetting press JP 350-L 1 Clean air dust collector with rotary valve airlock JZ 350-L Year of manufacture: 2016 Technical data JP 350-L: Suction nozzle: 350 mm Nominal volume flow: 6580 m³/h Maximum volume flow: 8000 m³/h Negative pressure at nominal volume flow: 2750 Pa Motor power: 11 kW Rated speed: 3000 rpm Pedpfjz Rrbdjx Akijrc Technical data briquetting press CS3-12: Throughput capacity max. 50 kg/h or 0.75 m³/h (material-dependent) Motor, hydraulic pump: 3.0 kW Motor, agitator: 0.37 kW Motor, dosing screw: 0.75 kW External fuse: 16A Briquet diameter: 65 mm Weight: 780 kg Storage container: 1200 x 1200 mm Overall external dimensions: 3150 x 1625 x 2742 mm Space required: 4500 x 3000 x 2900 mm Availability: approximately 11/2027 Location: Hesse

Condition: used, Technical details: material diameter up - to:: Ø 20-30 mm material length: ca. 70 mm Numbers of turbines: 3 Stck. Beam Hour: ca. 200 space requirement approx.:: Höhe ges. ca. 4,5 m connected load: ca. 40 kW Shotblasting Line for Springs Predpeu Nu I Tjfx Akijc application area: - for automatically cleaning of beam technical work of springs in troughput transportation trough the plant via drag chain. - troughput speed of the chain adjustable Has been in use very little, only approx. 200 running hours plant consists of: - machine housing, internal ( (high - alloy tool steel - hardened) with interchangeable beam plates - conveyor system - 2 pieces of blasting chamber maintenance doors - bucket conveyor - beam chamber length / depth: approx. 2000mm / approx. 670mm - material steel balls Ø 0,3 - 0,8mm - material to be machined: springs Ø 20 - 30mm x L: 70mm - drive power of the traction chain 1.1 kW - -feed speed max. 15 rpm. - maximum beam feed approx. 500kg (per unit) - connected load approx. 40 kW Condition: - without turbine blades (can be retrofitted for an extra charge) i.D. *

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 417 h, Amada HFE M2 5012 Press Brake (2021) Manufacturer: Amada Type: HFE M2 5012 Press Brake Condition: used, currently in production Year of manufacture: 10/2020 Operating hours: 6830 h Working hours: 417 h (still in use) Pressing force (kN): 500 Press beam length (mm): 1270 Distance between machine uprights (mm): 1035 Stroke (mm): 150 Opening width without die holder (mm): 480 Overhang (mm): 100 Prodpfx Akszwppyjisc Working height (mm): 920 Working speed (mm/sec): 15 Approach speed (mm/sec): 185 Opening speed (mm/sec): 185 Dimensions: Length (mm): 2585 Width (mm): 2190 Height (mm): 2420 Weight (kg): 3600