Used Press Safety Valve for sale (26,826)

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second Dodpfxsw Sgnke Aa Hekt - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: used, The scope of delivery includes: 01x shelf grate, used Material color: hot-dip galvanized Total depth: approx. 2,520 mm (support bar direction) for double shelf rows: 2x 1,100 mm Inner depth: approx. 2,517 mm Total width: approx. 1,120 mm (cross bar direction) Support bar dimensions: 30|1.50 mm Frame height: approx. 30 mm Mesh width: approx. 68 x 45 mm Weight | piece: approx. 30.83 kg Internal designation: GR-114 Note: The grate may have damage, scratches, dents, welds. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Dkedpfx Asvvhgloa Hst General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: ready for operation (used), Working width 3450 mm Working height 2000 mm Number of cylinders 5 St. loading dimensions L x W x H 3600 x 1200 x 2720 mm Hess "Multipress" Perforated Plate Press For all sloped, segmental, and round-arch windows and doors. Also for interior work or frame construction. For gluing staircase block joints and much more. Largest working area approx. 3450 x 2000 mm External dimensions approx. 3600 x 1200 x 2720 mm The vertical perforated plate press is constructed of heavy-duty, torsion-free steel. Thanks to its simple, robust, and economical design, it has a long service life. The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. The pressure cylinders and abutments are self-locking. Dsdpfx Aajwqr R As Hskt 5 plug-in hand hydraulic cylinders on a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stroke 4 fixed individual abutments (Technical specifications according to the manufacturer - no guarantee!)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, operating hours: 417 h, Amada HFE M2 5012 Press Brake (2021) Dkodjzwppyspfx Aa Hst Manufacturer: Amada Type: HFE M2 5012 Press Brake Condition: used, currently in production Year of manufacture: 10/2020 Operating hours: 6830 h Working hours: 417 h (still in use) Pressing force (kN): 500 Press beam length (mm): 1270 Distance between machine uprights (mm): 1035 Stroke (mm): 150 Opening width without die holder (mm): 480 Overhang (mm): 100 Working height (mm): 920 Working speed (mm/sec): 15 Approach speed (mm/sec): 185 Opening speed (mm/sec): 185 Dimensions: Length (mm): 2585 Width (mm): 2190 Height (mm): 2420 Weight (kg): 3600

Condition: used, Year of construction: 1977, pressure 160 t throat 340 mm stroke 20-120 mm no. of strokes max. 45 Hub/min table plate 1000 x 720 mm ram surface 750 x 380 mm daylight 330 mm Dedpfx Aajzwg Ums Hekt weight of the machine ca. 8,7 t dimensions of the machine ca. 1270x2310x2595 m

Condition: excellent (used), Year of construction: 2013, Ref:11118 . 2013 Schmedt Präleg & Präform Casing-in & Pressing Machines. For casing-in a variety of thin to thick books into flexible or hard cases. Special features:- • Programme selection via touch-screen monitor • Very short set-up and strip down times • Auto wash-up of glue rollers after each book Vertical wing action Twin PVA cold glue tanks Working in conjunction with:- 2008 Schmedt Präform 2100 Pressing & Joint Forming Machine. For pressing a variety of thin to thick hard cover books immediately after casing-in. Dksdpfjzkgdzex Aa Hjt Suitable for single or assorted books, pressing & burning in the joint in a single operation. Specification, Praleg 18-60: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Specification, PraForm 2100 Book press with groove cutter. Maximum format: 420 x 520 x 100 mm Power supply: 230 V + compressed air.

Condition: used, Year of construction: 2020, _____For sale on behalf of a customer: Pöttinger Impress 125 F PRO, first used in 2021. Bale counter: 5,000 bales. 32 knives. Central lubrication system. Air pressure system. Isobus without terminal. Very well maintained. For sale due to a change to a combination press/wrapper. The press is immediately available. Price: EUR 34,900.00 net (+19% VAT). Location: null. Dksdpfezx Ityex Aa Hst

Condition: good (used), Year of construction: 2006, functionality: unexamined, Internal article number: 26057 Pneumatic press Manufacturer: Schmidt Machine no.: 27-400084 Year of manufacture: 2006 Pressing force: 20 kN Stroke: 100 mm Safety distance: 348 mm Table: 200 x 150 mm Acceptance diameter: 20 mm Max. distance from table to acceptance point: approx. 270 mm Dimensions (L x W x H): 70 x 40 x 100 cm Weight: 60 kg Dkedpfx Aozx Scxja Hst Includes two-hand operation and emergency stop. Attention! The control unit for the machine is missing. The press would have to be operated purely pneumatically. You are welcome to inspect the machine while it is powered on, in our heated warehouse with over 500 m² of space.

Condition: new, Available quantity: 5 pieces Dkedszw I Rpepfx Aa Het Unused Alfa Laval LKC-2 check valve. Stored in original packaging. Manufacturer: Alfa Laval Type: LKC-2 Article number: 9612220098 Design: LKC-2-ISO/DIN 76/NW80 Nominal size: NW80 Condition: NOS / unused, stored in original packaging.

Condition: excellent (used), Year of construction: 1973, Description to follow! Dedpfszxh S Nsx Aa Hekt

Condition: good (used), Year of construction: 1989, machine/vehicle number: 4113, functionality: fully functional, operating hours: 4,109 h, overall weight: 6,600 kg, Hydraulic press brake Manufacturer: DoneWell, Hahn & Kolb Stuttgart Type: 80 - 2500 Dkodpfxszyanle Aa Hot Year of manufacture: 1989 Control system: Cybelec Model Eva Pac Max. working width: 2500 mm Max. clamping force: 100 t Back gauge: 750 mm with 2 stop fingers Condition: good Die: Multi V 7 angle Tools

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, pressing force: 150 t, stroke length: 215 mm, reverse speed: 150 mm/s, table length: 4,100 mm, Equipment: CE marking, safety light barrier, 1 used, High quality fully serviced Bystronic Beyeler 4metre cnc pressbrake for sale Dsdjzpxt Eepfx Aa Hekt Machine Specifications Manufacturer: Bystronic Beyeler Model: PR 150 (Pressure Reference) Year of Manufacture: 2006 Tonnage Capacity: 150 Tons Bending Length: 4100 mm (4 Metres) Hydraulic tool clamping CNC Control System: Cybelec Modeva Control Total Axis Configuration: 7-Axis (Back gauge: X, X1, R, Z1, Z2 + Beam: Y1, Y2) Key Features & Maintenance Advanced Crowning: Equipped with a hydraulic crowning system to ensure precise bending accuracy across the entire 4-metre bed length. Complete with tooling package as per photos Civil Work Savings: Free-standing design that requires no pit floor excavation, simplifying installation and relocation. Certified Service History: Fully serviced and maintained directly by Bystronic UK, ensuring optimal operational efficiency and reliability. Condition: High-quality, used, and fully serviced condition.

Condition: used, Year of construction: 1997, Press force: 40 t Stroke: 620 mm Throat depth: 280 mm Shut height (stroke up): 830 mm Table area: 620 x 520 mm Table opening: 150 mm Table height above floor: 600 mm Ram area: 150 mm Downstroke speed: 120 mm/s Dsdpszypmwsfx Aa Hjkt Upstroke speed: 30 - 450 mm/s

Condition: used, Year of construction: 1978, Press force: 500 t Stroke: 600 mm Frame width: 1550 mm Side frame opening: 1250 mm Shut height (stroke up): 900 mm Dsdpfx Aajzyl Dre Hokt Table area: 1200 x 1300 mm Cushion force in table: 250 t Cushion stroke in table: 150 mm Cushion area in table: 950 x 950 mm Table height above floor: 1245 mm

Condition: as good as new (ex-display), Year of construction: 2024, New hydraulic heating plate press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates, 3,000 x 1,300 mm - Total pressure: 90 tons - Number of heating plates: 2 pcs. Dkedpfxedx R Tfo Aa Hot - Number of tiers: 1 pc. - Cylinder stroke: 350 mm - Tier opening: 350 mm - All-side loading - Number of pressure cylinders: 6 pcs. - Diameter of pressure cylinders: 85 mm - Power requirement of hydraulic unit: 3 kW - Electric heating plates made of solid, hard aluminum with built-in heating wires - Heating power: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and pinion and parallel guides at 2 corners of the press table, made of self-lubricating material - Electronic control unit with touch screen for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnostics and display of error messages - Safety circuit with two-hand operation - Safety pull cord - Safety bracket for the lower press table Integrated accessories: - Touch screen TS/400 - EFC Electronic flatness control - Gold-anodized heating plates (bus bars) Location: In stock at 54634 Bitburg - Immediately available -

Year of construction: 1999, condition: used, Colour: Grey Membrane press Orma PM/AIR Year of construction 1999 Serial number 52850199 Dimensions 2300*900mm Max panel size 2200x800mm Max panel thickness 40mm 8 cylinders diameter 100mm Stroke 150mm Pressure 160T Pressure pressure 6 kg/cm² Heating 13kW Total power 17.3kW 380V, 35Amp Dimensions: 3900x1800xH2100mm, weight 5900kg - Year: 1999 - Documentation available: No - CE certificate present: No Dksdewnhicopfx Aa Hot - Serial number: 52850199 - Main motor power [kW]: 17.3 - Max. workpiece length [mm]: 2200 - Max. workpiece width [mm]: 800 - Max. workpiece height [mm]: 40 - Number of cylinders [pcs.]: 8 - Cylinder diameter [mm]: 100 - Total working pressure [Ton]: 160 - Working pressure [kg/cm²]: 6 - Heating boiler present: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1999, machine/vehicle number: 80858, functionality: fully functional, power: 15 kW (20.39 HP), pressing force: 150 t, stroke length: 200 mm, throat depth: 250 mm, total length: 4,400 mm, total width: 1,700 mm, total height: 2,500 mm, overall weight: 10,400 kg, Equipment: CE marking, HACO ERM 40150 (80858) Dkjdpfszxgxujx Aa Hot Technical condition: Used Bending length: 4100 mm Tonnage: 150T Type of press brake: Synchro Back gauge: Y1 + Y2 + X-R, CNC controlled Back gauge length: 800 mm Crowning: Yes (CNC controlled) Daylight opening: 400 mm Stroke: 200 mm Control: BC 45 Robosoft, graphical control Motor power: 15.0 kW, 400V Tooling: Yes, 1 set of multiple bending tools Tooling standard: European standard Total length: 4400 mm Total depth: 1700 mm Total height: 2500 mm Weight: 10,400 kg Serial number: 80858 Year of manufacture: 1999 Delivery and installation at your location are, of course, possible; delivery costs and any additional costs will be discussed separately. Since 2019, we have been the Dutch dealer for HACO press brakes and shears. In addition to the sale of sheet metal processing machines, we offer a complete package for service, maintenance, and repairs.

Condition: excellent (used), Year of construction: 2001, - No. 4 Schuler 630-ton presses - Capacity: 630 tons - Stroke: 1,300 mm Dkedpfxjzy Uvqe Aa Hjt - Die cushion tonnage: 24 – 160 tons - Die cushion stroke: 200 mm - Die opening (Pmi): 800 mm - Work surfaces: 2,500 x 2,100 mm - Mobile press tables: No. 2 - Approach speed: 600 mm/min - Working speed (50%): 96 mm/min - Working speed (100%): 46 mm/min

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, A very good machine with the benefit of the infeed table and outfeed exit table, which saves significantly on labour. Dedpfx Aajzifpgs Hskt

Condition: excellent (used), Year of construction: 2017, operating hours: 86 h, functionality: fully functional, machine/vehicle number: 5180, Size 63 x 92 cm, V-type feeder, Suction tape feeder board, Preset sidelay, Paper size preset, Ryobi fully automatic plate changers, Plate register remote control, Ryobi PCS-G printing control, PDS-E spectrojet, Ryobi D-matic alcohol dampening system, Ink roller temperature control, Automatic blanket wash, Automatic roller wash. Dkodowzvzmepfx Aa Hjt

Condition: good (used), functionality: fully functional, BDC 100T Hydraulic Moulding Press | Heated Platen Compression Press BDC 100T hydraulic moulding press for sale with heated platens. Approx. 100 tonne compression press for rubber, plastics, composites and laminating applications. Manufacturer: BDC Machine Type: 100T Moulding Press with Heated Platens Condition: Decommissioned. Good 100 Tonne Heated Platen Compression / Moulding Press This BDC 100T Hydraulic Moulding Press is a heavy-duty industrial press designed for heated platen moulding, compression moulding, forming, bonding and laminating applications. This machine is suitable for use in rubber moulding, plastics processing, composites, bonding, pressing, laminating and heated forming operations, making it a versatile addition to manufacturing, production and specialist fabrication workshops. Key Features 100 tonne hydraulic press capacity Heated upper and lower platens Heavy-duty industrial construction Suitable for compression moulding and heated platen pressing Ideal for rubber, plastics, composites and laminated materials Hydraulic pressing action for controlled force application Well-suited to production, R&D and workshop environments Machine Description The BDC 100T Hydraulic Moulding Press is designed for applications requiring high pressure and controlled heat. The heated platens allow materials to be formed, cured, bonded or compressed under consistent pressure, making the machine suitable for a wide range of industrial moulding and manufacturing processes. Hydraulic moulding presses of this type are commonly used for rubber moulding, plastic compression moulding, composite forming, gasket production, bonded components, laminating, hot pressing and specialist materials processing. Approximate Technical Specification General Manufacturer: BDC Machine Type: Hydraulic moulding / compression press Press Capacity: 100 tonnes Press Action: Hydraulic Construction: Heavy-duty industrial press frame Rams: 4 Platen Type: Heated platens Platen Arrangement: Upper and lower heated work platens Working Applications Compression moulding Rubber moulding Plastic moulding Composite pressing Laminating Hot pressing Dsdpfozi Hchox Aa Hekt Bonding applications Heated platen forming Production and workshop moulding work Heated Platen System Heating: Heated platen system Platen Size: 510 x 510mm Temperature Control: Fitted with platen temperature control Platen Use: Suitable for controlled heat and pressure applications Press System Power: Hydraulic press system Force: Approx. 100 tonnes Operation: Hydraulic pressing cycle Pump Size: 2.2kW Ram Diameter: 190mm Distance Between Rams: 540mm (Width) Max Daylight: 250mm Typical Configuration: Heavy-duty hydraulic moulding press with heated work platens Summary The BDC 100T Hydraulic Moulding Press is a 100 tonne heated platen compression press used for rubber moulding, plastic compression moulding, composite pressing, laminating, bonding and hot press applications. It features hydraulic pressing action and heated platens, making it suitable for industrial manufacturing, workshop production and specialist materials processing. Important Notice Note: Specifications and information provided in this listing are supplied in good faith; however, their accuracy cannot be guaranteed. Specifications are approximate.

Condition: used, Year of construction: 1999, Amada Promecam HFB 2204 8-Axis Hydraulic Press Brake (1999), Capacity 2200kN, 4000mm Bed, Maximum Stroke 180mm, Stopping Time 80ms, Stopping Distance 9mm, Machine Weight 16000kg. S/No. HFBO 220 40 H990103 (1999). Country of Origin: France Dsdpszn Urzsfx Aa Hokt Please Note: Collection from 6th – 20th October 2026, Site will be closed from 10th September – 5th October 2026 Please Note: This lot is located in Cardiff, Wales, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 1998, Hours: approx. 45,600 6 axles Dsdpezniq Eofx Aa Hekt Location available upon request.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, C-frame press for clinching technology Pressing force: 4.8 t Air pressure: 6 bar Total stroke: 32 mm Power stroke: 3 mm No tools included Dksdpoy Ey Hzjfx Aa Hst

Condition: good (used), Year of construction: 1978, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons Dedpfxjyzd I Uo Aa Hokt -Motor: 11 kW -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm -Projection: 650 mm -Max. stroke: 150 mm -Hole: Ø 50 mm -Documents: Operating instructions/circuit diagram -Dimensions: 1640/1300/H2650 mm -Weight: 4440 kg