Used Precision Rotary Table for sale (23,412)

Condition: new, functionality: fully functional, NEW Rotary table surface grinder available in the UK. With up to a 400mm grinding diameter on this rotary table, vertical spindle surface grinder from Italian manufacturer DELTA, a leading surface grinder manufacturer with over 20,000 units sold worldwide. Psdpfx Aljnziakj Nspu The rotating table is controlled by asynchronous three-phase bipolar motors with 8/16 poles; thanks to these motors, the table can rotate at a speed of 40 rpm and at a rate of 30 rpm. Delta Rotary surface grinder Maximum grindable surface 400mm Ø Distance between column and wheel axis 315mm Max. distance between magnetic table and wheel 205mm Rapid feed per turn of handwheel 2mm Micrometric feed by small handle 0,01mm Size of cup wheel 200 x 80 x 78mm Ø Size of abrasive segments 50 x 20 x 90mm Motor power of the wheel (4 HP)-3 kW RPM of the wheel (50 Hz) 2840rpm/min Electropump motor power (0,08 HP)-0,06 kW Mass of the machine 680kg Rotary table surface grinder Standard Equipment Low tension electric system (24V). Cooling system with electropump Wheel-holder flange and grinding wheel. Grinding wheel guard Table guard.- Stakes key Instruction book/testing certificate Two colour painting RAL 5018-7032, bicomponent multicoat of paint CE conformity certificate with respect to the Units Directive CEE 89/392 and subsequent modifications Stock machine complete with Automatic Downfeed control

Condition: good (used), Year of construction: 2003, ELB Rotary 40 NC-K rotary table surface grinding machine, table diameter 400 mm, grinding height 300 mm, year of manufacture 2003, ELN NC-K control, spindle power 4 kW, grinding wheel 300 x 50 x 76.2 mm, rotary table with magnetic chuck diameter 400 mm, full enclosure, coolant system with paper band filter, can be inspected under power, we are happy to take care of installation / training and subsequent on-site service! Financing/leasing is no problem, we are happy to provide an offer! Ppsdpfxouiafuo Al Nou

Condition: used, Year of construction: 2015, functionality: fully functional, DrillMatic TA325/P/H/12/2/1/-180° rotating hydraulic/pneumatic index table 400x620 Manufacturer: DrillMatic Type: TA325/P/H/12/2/1/-180° Air connection: 4 ports. Index values: 3 4 6 8 12 Year of manufacture: 2015 Weight: 66 kg Ppedpfx Aloukg Srj Neu Table size: 400x620mm

Condition: used, Year of construction: 2006, functionality: unexamined, We are offering here a rotary table from the brand Parkson. The model is PAR-251 R. The rotary table has a diameter of just under 250mm. Ppjdpfx Alsxtu Efs Nou Feel free to contact us for a non-binding offer.

Condition: used, table diameter 400 mm table load . t table height . mm total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m The technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale; our terms and conditions of business and sale apply exclusively. About us More than 400 of Ppodpfx Aleyqv Rfo Nsu our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find more offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 1960, condition: good (used), machine/vehicle number: 970015, Load capacity with horizontal swivel plate position: 10 t Load capacity with vertical swivel plate position and center of gravity distance of 300 mm: 10 t Load capacity with vertical swivel plate position and center of gravity distance of 830 mm: 5.5 t Swivel plate dimensions: 1500 x 1500 mm Ppjdpfjcblc Sex Al Nju Swivel plate speed, hydraulically continuously adjustable: 0.025 - 0.75 rpm Swivel range: 0 - 135° Swivel time for full swivel range (to): 140 s Swivel time for full swivel range (from): 120 s Hydraulic drive: 380 V Height of the swivel axis above the floor: 1450 mm Space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3.5 t Weight of the counterweight: 2.3 t

Condition: used, machine/vehicle number: 2414-0075 bzw. 2314-0703, Tabletop clamping surface: 520 x 1000 mm 6 clamping slots: 16 mm Slot spacing: 90 mm Clamping plate can be rotated horizontally to the right and left by: 45° each Can be tilted towards/away from the machine by: 15° each Can be swiveled to the right and left by: 15° each Permissible load, movable: approx. 1000 kg Permissible load, fixed table: approx. 1500 kg Weight: 376 kg Psdpfx Alob Hmbps Nopu Suitable for DECKEL milling machines: FP 3 L; FP 3 LG; FP 3 LV

Condition: used, with mounted three-jaw chuck Pedjda I Rvspfx Al Nepu Table diameter: 200 mm Bore diameter: approx. 18 mm Overall height: 100 mm Total height with chuck: 165 mm Width: 270 mm Length: 320 mm

Condition: ready for operation (used), Horizontal rotary table, manually operated Bore diameter: 145 mm Including 3 inwardly stepped jaws Space required: 500 x 500 x 300 mm Ppsdpswx H Irefx Al Nou

Condition: ready for operation (used), Outside Ø: 350 mm Bore: 40 mm Construction height: 115 mm including three-jaw chuck AROWA, 250 mm Ø, bore: 75 mm Psdjg Hzazepfx Al Nepu Total weight:

Condition: used, table diameter 400 mm table load . t table height . mm total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m The technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale; our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You Ppjdpoyqt Rvofx Al Nju can find more offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Table diameter: 250 mm Ppsdeyv D Ahspfx Al Nsu Table height: 105 mm

Condition: new, table diameter 715 mm table load 500 kg Ppodpfx Asyv Nxzel Nou Frontal Loading Center (A) 150 mm Side Loading Center (B) 150 mm Rotating speeds 0,1 - 1 UpM T-slots 6 x M16 Tilt Angle 90-180-110 ° Tilting Speed 30 sn min./90° weight of the machine ca. 675 kg

Condition: new, table diameter 900 mm table load 1.000 kg Podpjyv I Riofx Al Njpu Frontal Loading Center (A) 150 mm Side Loading Center (B) 150 mm Rotating speeds 0,1 - 1,1 UpM T-slots 6 x M16 Tilt Angle 90-180-105 ° Tilting Speed 30 sn min./90° dimensions 2100x920x1100 mm weight of the machine ca. 930 kg

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min bore 60.0 mm motor 230 Volt weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display Pedpfjxabm Nox Al Nspu

Condition: new, table diameter 500 mm table load 300 horizontal kg. table load 150 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.5 U/min bore 90.0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90.0 kg. Psdpfx Aloxabl Se Nepu range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise Psdpfx Ajxaatnol Nepu - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. Psdsxaafqspfx Al Nopu - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: used, table diameter 630 mm weight of the machine ca. ca, 0,35 t Ppedpfxjymf U Eo Al Neu table height 220 mm

Condition: used, table diameter 790 mm table load 500 Kg Psdpfx Aeyx Ip Rsl Nepu swivelling range 0 - 135 Grad turning speeds max. 2,0 U/min connected load frequency 400 V weight 0,95 t Dimensions (LxWxH) 1,4 x 0,8 x 1,5 m Welding turntable incl. - Control column with foot switch - 630mm chuck - Chuck key

Condition: used, Year of construction: 1999, plate width 2980 mm plate depth 3000 mm plate height 1400 mm total power requirement 11 kW Pedpjgxqvzjfx Al Nopu

Condition: excellent (used), Year of construction: 2019, ⚡ Optimize your production – faster, more efficiently, without chaos! ⚡ Are you looking for a solution that will improve the organization of production, packaging or picking? Discover the professional Virginio Nastri carousel table – designed for maximum efficiency and ergonomics. ⚙️ How does it work? The device operates on the principle of a rotating carousel – products are placed on a circular platform that rotates around its axis. -Elements are transferred to the next stages of the process in a smooth and orderly manner Ppedpfoy Awamsx Al Neu -Constant speed ensures work rhythm and reduces downtime -Ergonomic access from all sides increases operator comfort 🔗 Complete system – ready to work. The set also includes a Virginio Nastri CB/M3 conveyor belt , which enables automatic feeding of products – a perfect complement to the entire production line. 💡 Why is it worth it? ✔️ Increased work efficiency, ✔️better work station organization ✔️real time and cost savings ✔️high-quality workmanship – a proven brand ✔️ ready-made solution for integration with the production line. We have various models of carousels – for boxes or bags

Condition: used, table diameter 500 mm weight of the machine ca. ca. 0,2 t table height / mm Pedpfoylz D Hjx Al Nopu

Year of construction: 2026, condition: new, Stainless Steel Rotary Table – For Food Packaging Lines Manufacturer: In-house production Machine type: Rotary table / accumulation table Application: Food packaging and processing lines Description This stainless steel rotary table is designed for product accumulation and handling at the end or beginning of food packaging lines. The table allows operators to easily collect, sort, or feed products during the packaging process. The rotary table is built with hygienic stainless steel construction and is suitable for use in food production environments. It can be used as a collection table after packaging machines or as a feeding table before labeling, weighing, or packing systems. Our rotary tables are manufactured in-house and can be supplied in different diameters depending on customer requirements. Technical Specifications Ppjdpfxsyt Hdze Al Neu - Machine type: Rotary accumulation table - Construction: Stainless steel (food grade) - Drive: Electric motor with gearbox - Speed: One rotation speed - Power supply: 230 / 400 V – 50 Hz (depending on configuration) - Design: Hygienic construction suitable for food environments Key Features - Heavy-duty stainless steel construction - Smooth product accumulation and handling - Suitable for food production and packaging lines Applications - Food packaging lines - Tray sealing lines - Checkweigher and labeling lines - Product collection after packaging machines Condition New – manufactured in-house.

Condition: excellent (used), functionality: fully functional, from an EDM (electrical discharge machining) machine Travel in X: 220 mm Travel in Y: 160 mm Mitutoyo 2-axis digital readout with a display accuracy of 1/1000 mm . Ppodpfxoy H Abke Al Nsu Base without evaluation .