Used Powder Silo for sale (1,775)

Condition: new, Year of construction: 2025, functionality: fully functional, As a leading manufacturer of systems for surface technology, we offer you an almost limitless portfolio for powder coating applications. At our site in 47669 Wachtendonk, we turn your individual requirements into reality and produce your desired concept. Thanks to our in-house production for almost all components, we are flexible and can respond specifically to your requirements. We not only provide you with your ideal powder coating system - we are also on hand with comprehensive user expertise to support you in all matters relating to surface technology. Every item offered here is manufactured especially for you. Whether large or small projects - we supply complete systems from a single source, tailored to your requirements. Hsdjtxcpwepfx Ag Usng We look forward to hearing from you and implementing your ideas together! Example: KM Pro KM Pro electric chamber oven Heating type electric Air circulation Heating capacity 30kW Circulating air motor 3kW Insulated up to 250°C Connected load 380-400V, 34kW Floor insulation 100mm Insulation walls 150mm (highly compressed) External dimensions : 3400mm (L) x 1800mm (W) x 2550 (H) without fan motor on top and switch cabinet on the side Working dimension (inside) 3100mm (L) x 1200mm (W) x 1880m (H) Height due to the low-lying rails ≠ 2000mm Equipment - Double-wing door, incl. door bolt and handle - Adjustable air slats (optimum air circulation regulation) - 2 pcs. Heating coil - 2 PT 100 temperature sensors (top and bottom) - Exhaust air throttle flap, manual adjustment (exhaust air regulation) - 2 rails on the oven ceiling - Walls made of galvanized sheet steel Control system : - Rittal control cabinet - Hitachi panel 7 inch (touch operation) - Control via Hitachi PLC - Speed control of the air circulation motor via frequency converter, with braking resistor - Emergency off - Adjustable control power of the heating coil (if current peaks are reached, you can regulate the oven down) - GELLING function for stoving different colors in one oven (air circulation motor is throttled over a period of time) - OPEN-DOOR function regulates the air circulation downwards when the door is opened. So you have less heat loss - Traffic light to indicate the respective status. - STAY-HOME-WARM-UP is a time-controlled switch-on of the oven. This allows you to start the oven before starting work. - SEE-TEMP shows the temperature curve of the oven. This allows you to check the temperature. - GO-HOME-LEAN-BACK switches the oven off via a time control.

Condition: used, functionality: fully functional, Year of construction: 2016, Silo System I Consists of 12 hopper silos with access doors, sight glasses, and ventilation hoods. Arranged in two separate rows of six (on the left and right side of the bucket elevator) along the hall wall. Total storage capacity approx. 348 tons (29 tons per silo). Dimensions per silo: 3.10 m x 3.10 m, height 5.40 m, capacity approx. 26.3 tons. Hsdpfx Agexyqbpe Ujng _____ Silo System II Comprising three single-cell hopper silos with raised outlets, including access doors and aeration cone: - Silo 1: 2.10 m x 3.10 m / height 5.23 m (approx. 15 tons) - Silo 2: 3.10 m x 3.10 m / height 5.23 m (approx. 23 tons) - Silo 3: 2.10 m x 3.10 m / height 5.23 m (approx. 15 tons) _____ 2 x trough chain conveyors RTF 20 S (beneath the silo group), galvanized version. Total length: 19 m (conveying length 18 m + bend). Capacity: approx. 20 t/h, equipped with reinforced roller chain. _____ Trough chain conveyor RTF 20 S, total length: 5.0 m (conveying length 4 m + bend). Capacity: approx. 20 t/h, equipped with reinforced roller chain. _____ ABC conveyor belt system, belt width 500 mm, capacity approx. 40 t/h. The belt conveyors are designed as trough belt conveyors made of aluminum. All are supplied with oil-resistant belts, spindle tension devices, infeed and discharge hoppers, as well as internal and external belt scrapers. A-conveyor: length 9.00 m, with 2.2 kW drum motor B-conveyor: length 22.00 m, with 3.0 kW drum motor C-conveyor: length 10.00 m, with 2.2 kW drum motor Including control panel, cables, cable trolley, and C-rails for the cables; radio control unit for mobile operation. _____ Mobile intake auger with hopper. Adjustable incline from 15° to 25° via universal joint. Length of inclined auger: 2.42 m. Discharge height: 0.92 m. Intake hopper (L x W x H): 1.49 m x 1.00 m x 0.44 m. Raised intake hopper: 2.95 m x 1.41 m x 0.61 m. _____ Bucket elevator Type EB 20 A for outdoor installation, length: 7.0 m, capacity approx. 20 t/h _____ Control cabinet for operating the conveyor units and belt system, constructed of painted sheet steel. - Siemens ISOBUS / Display, touch-screen Pricing: Ex works, loaded. Disassembly by purchaser. Sale of individual components is possible.

Condition: used, mileage: 451,257 km, power: 338 kW (459.55 HP), first registration: 04/2021, fuel type: diesel, empty load weight: 6,806 kg, maximum load weight: 11,194 kg, overall weight: 18,000 kg, tire size: 315 / 70 R 22,5, next inspection (TÜV): 04/2026, brakes: intarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, total length: 25,500 mm, total width: 39,700 mm, total height: 62,520 mm, Year of construction: 2021, front tire size: 315 / 70 R 22,5, Equipment: air conditioning, compressor, differential lock, navigation system, spoiler, Work lights, electrically adjustable and heated exterior mirrors, hands-free phone system for mobile phones, differential lock, electric windows left and right, long cab with high roof, air-suspended driver's seat, leaf-air suspension, 12 gears, automatic transmission, air conditioning, compressor, refrigerator, leather steering wheel, multifunction steering wheel, navigation system, entertainment: navigation device with display screen, sleeper cab, 2 sleeping berths, driver's seat heating, sun visor, spoiler package, tank capacity 550 + 290 litres, Safety Package: adaptive cruise control + emergency braking assistant + lane assist, additional brake: Intarder, Euro 6 engine, LED tail lights, LED headlights, adaptive cruise control, GHH CS 1050 silo compressor. Hnedpjw Syvnsfx Ag Ueg

Condition: good (used), Boisseaux de stockage Longueur : 4,50 m Hsdpjrhzk Uefx Ag Usng Largeur d'une trémie: 1,40 m

Condition: used, mileage: 664,000 km, power: 368 kW (500.34 HP), first registration: 01/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, compressor, parking heater, Manufacturer Scania Model R500 6x2 NGS CR20H 25 m3 Silo Euro 6 Year 2020 Condition Very good Serial Number YS2R6X20005576590 Ref. nr. 877854 Reg. date: 21-01-2020 Last seen: 25-02-2025 Hk: 500 Km: 664000 Gearbox: Opticruise GRS905R Eurotype: 6 Diesel tank: 1 Tank liter: 500 Rear view camera: ? Cabin heater: ? Air conditioning: ? Number of beds: 1 Cabin type: CR20H Navigation: ? Coffee machine: ? Leather seats: ? Radio: ? Refrigerator: ? Disc brake: ? ABS: ? Engine brake: ? Retarder: ? Tire Size: 385/65 - 315/80 - 385/65 Cover% left 80 - 80 - 80% Front suspension: Air Suspension rear: Air Wheelbase: 4150mm. Toolbox: ? Hydraulic system: ? Total weight: 26000 kg. Net weight: 11433 kg. Load capacity 14567 kg. Manufacturer: HMK Bilcon Hnsdpfx Agewk Tnis Ujg Tank capacity: 25800 l. Separation room: 4 Compressor: ?

Year of construction: 2025, condition: new, I have a packaging machine for sale for bulk goods such as flour, sugar, powdered milk, spices, and much more. The packaging capacity is 5-30kg in paper or plastic bags. the price 13 500 EUR including 1- screw feeder 2- packing machine 5-30kg - Power supply: 2.5kW 400V 50Hz - Packaging accuracy: +/- 1% - Packaging speed: 200-400 bags per hour (at 10kg) - Set weight: 190kg - Set dimensions: 1000x850x2300mm For highly dusty products, an additional dust extractor can be connected. Hnodpfx Agsxfapts Ujg Price 13 500 EUR - EXW terms INVITE TO INQUIRE

Condition: new, functionality: fully functional, Pretreatment system for wet chemical cleaning of workpieces to be coated - NEW - As a leading manufacturer of systems for surface technology, we offer you an almost limitless portfolio for powder coating applications. At our location in 47669 Wachtendonk, we put your individual needs into practice and produce your desired concept. Thanks to our own production for almost all components, we are flexible and can respond specifically to your requirements. With us, you not only get your ideal powder coating system - we also have comprehensive user expertise at your side to support you with all questions about surface technology. Every item offered here is manufactured especially for you. Regardless of whether it is a large or small project - we supply complete systems from a single source, according to your ideas. We look forward to hearing from you and implementing your ideas together! Here we offer you our newly manufactured VBH KM Pro pretreatment system for part dimensions of up to 4,000x1,400x2,000mm. System description: Pretreatment system for wet-chemical cleaning of workpieces before coating using the 3-zone process + nozzle line for loss. Equipment: -Washing stations for up to 2 traverses in one cleaning cycle -3 rails (1 middle, 2 side washing stations) -Washing ring with removable middle nozzle line (Info: The middle nozzle line is used when 2 rails with flat workpieces are to be cleaned at the same time; without the middle nozzle line, wider workpieces can be moved in and cleaned on the middle guide rail.) -4 washing zones (degreasing circuit, 1st rinse (pre-rinse) circuit, 2nd rinse (final rinse) demineralized water cascading to degreasing basin 1 -final spray ring (zone 4) for passivation in the no-rinse process when pulling out the goods carriers (duration of fogging adjustable) Passivation is injected into demineralized water. Inlet in basin 1. -2 storage containers made of stainless steel including level monitoring (sink 1 + demineralized sink) -1 stainless steel container insulated, as electrically heated, including level monitoring (degreasing) -Drain taps on the basins for disposal, cleaning and new preparation -Supply of the VE water requirement via mixed bed cartridges -Exhaust fan to remove the water vapor to the outside including exhaust pipe -Cabin made of stainless steel -Loading via double-wing door -Operating terminal (PLC controlled) outside the washing cabin -Control via PLC and touch display including remote maintenance module -Intuitive, illustrated operation for quick and easy handling Hnjdpfx Agstxcyis Ueg Suitability: -particularly for flat workpieces, as the use of the central line means 2 product carriers can be cleaned at the same time -Frames and uncomplicated, open geometries up to a maximum of 1,000 mm wide can also be cleaned well Advantages: -Personnel-free, automatic cleaning, within approx. 20 minutes. -optimal adhesion properties especially for the subsequent coating -fully parameterizable process program from KM Industrieservice, thus completely flexible for changed chemical systems -lifetime support and spare parts availability from KM Industrieservice -cost-effective pretreatment solution with service life-optimized tank quality, thus also cost-effective wastewater disposal We can send you a video link to this system on request.

Condition: excellent (used), 2-chamber aluminium silo standing on foot ring (plastic granulate silo) - second-hand - Content approx. 70.000 Ltr. Hnodpfof D Hygsx Ag Ujg diameter approx. 3.000 mm cyl. height approx. 9.250 mm Total height approx. 14,850 mm Container with upper conical bottom and lower cone on top shelf per chamber: 1 dome DN 600 1 vent connection DN 100 1 flanged socket DN 80 the lower conical bottom ends in 2 square outlet nozzles approx. DN 250 otherwise according to photos The silo is equipped with brackets for a double ladder with back protection, which can be purchased as well, price on request.

Year of construction: 1983, condition: ready for operation (used), Various mixing and storage silos are available. 1) Stainless steel silo. 2) Stainless steel silo Zeppelin, year of construction: 1983, capacity: 32m³, friction angle range: 25°-45°, overpressure range: 5mbar-45mbar, max operating temperature: 50°C, bulk density: 0.6kg/dm³, silo height: 11250mm, silo diameter: 3000mm. 3) Stainless steel silo. 4) 3x identical HD-PE mixing silos, total height: approx. 10500mm, diameter: 3000mm, volume: approx. 49.5m³, mixing pipes: NW 150, motor power: 15kW. 5) 2x identical storage silos Zeppelin, year of construction: 1980, volume: 127m³, capacity: 119m³, silo diameter: 3500mm, inclination angle: 15°, hopper height: 1680mm, support ring height: 3700mm, total height: 17500mm. Documentation available. An on-site inspection is possible. Individual sale possible. Hodpexxl I Uefx Ag Usng

Condition: good (used), Year of construction: 1990, functionality: fully functional, For sale is a complete, fully operational powder coating system, year of manufacture 1990. Over the past few years, numerous system components have been modernized or completely replaced and upgraded. The system was decommissioned in Q1-2025, but can be reactivated and operated at any time if required. All components remain on standby and can be started up and demonstrated on site. The system features one manual and two automatic spray booths (which can be operated simultaneously). The maximum workpiece dimensions that can be coated across all booths are 7000x2300x800 mm. Hnodjw Ek Ntjpfx Ag Uog The entire conveyor system is supplied by CSF. All system controls, including a visualization system, all control cabinets, all frequency inverters, as well as many other components have been completely renewed within the last 5–7 years. There is no maintenance backlog; the system has been regularly and meticulously serviced by our own maintenance department and the respective manufacturers. A detailed description can be provided upon request. Price on request!

Condition: new, empty load weight: 7,000 kg, maximum load weight: 27,000 kg, overall weight: 34,000 kg, axle configuration: 3 axles, loading space volume: 35 m³, suspension: steel, tire size: 385/65R22,5, color: white, Year of construction: 2018, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, leaf suspension, ABS (anti-lock braking system), support legs. Body: approx. 35 m³ with electric compressor, 380V three-phase power connection. Hnodpfx Aevhhtveg Ujg COC papers available, EU registration possible! COC papers available for registration in the European Community! Compressor available at an additional charge of €7,500.00! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors!

Condition: good (used), Item: A-01208-Powder-silos Vertical Stainless Steel Powder tank Capacity 45.000 l/each Exterior dimensions: Dia Ø 2860 mm Total H 9000 mm. Cylinder height 6500 mm. Vertical stainless steel tank - 2 pcs. 30 degrees conical bottom, 15 degrees conical top and manhole at side of bottom. Quality: AISI 304 Hjdpjiiyuusfx Ag Ueng

Condition: new, Year of construction: 2025, Starter Kit KM Pro for Powder Coating Consisting of Electric Curing Oven KM Pro + ASAP XS Eco In stock and available immediately Electric Curing Oven KM Pro ✅Heating medium: Electric ✅Heating type: Circulating air ✅Heating capacity: 30 kW (continuously adjustable) ✅Circulation air motor: 1.5 kW up to 250°C ✅Connected load: 380-400 V, 32 kW ✅Insulation: 150mm compressed ✅Working dimensions: 2200mm (L) x 1900mm (W) x 1700mm (H) ✅KM Pro control unit with crystal-clear touch display and intuitive operation ✅Remote maintenance KM Pro optional (additionally for only €2,200.00, controllable via smartphone or PC) ✅Loading via double-wing door ✅2x rack trolleys, half size for simultaneous curing ✅Automatic exhaust via actuator for smoke and temperature extraction ASAP XS Eco Powder Extraction ✅4,000 m³/h extraction capacity ✅2 polyester filter cartridges, each with 20 m² filter area ✅Working dimensions: 2300mm (H) x 1600mm (W) ✅Jet-pulse filter cleaning, manually switchable ✅Collection container with rollers Hodpfsxtf Azjx Ag Ujng ✅Powder baffle plate ✅Silencer for pleasant working noise levels ✅Mobile, can be rolled ✅Extraction fan 1.1 kW with IE3 motor ✅Sturdy construction made of galvanized sheet metal ✅Ready to connect via 16 A plug Now together for just €35,990.00 net, plus shipping For more information, feel free to contact us. LEASING / HIRE PURCHASE Together with our financing partner, we are happy to offer you leasing and hire purchase options (subject to good credit rating). Contact us for details. KM Industrieservice – The machine builder for your surface technology needs, specializing in powder coating. We manufacture: • Curing technology (electric, gas, oil, infrared, wood chips, hybrid) with certified curing results, available as KM Basic or KM Pro versions • Extraction and filter systems as standalone or cabin solutions in various designs • Pre-treatment systems for wet-chemical cleaning prior to coating, ensuring ideal adhesion conditions (manual, automatic, in all versions) • Blasting technology, manual or automatic, from small parts up to heavy-duty • Transport technology – for efficient parts transport (manual, automatic, lift-lower units, transverse shuttles, combination devices, and much more) • Remote maintenance – Fast and flexible service interventions Our Service Promise: ✅Highly individual consulting, manufacturing, and production tailored for even the most demanding requirements, all from a single source ✅Perfect fit and reliable delivery ✅In-house, German-speaking service technicians ✅Manufacturer expertise – As the OEM, we know your equipment inside out, and you can always count on immediate support. ✅Top-level and rapid spare parts availability ✅Long-term assistance for durable systems A video says more than a thousand words – Visit us on social media: ✅Instagram: km_industrieservice ✅Facebook: KM Industrieservice Would you like an in-depth consultation? We are happy to advise you personally: ✅02153-1377061. We look forward to your inquiry and to finding the right solutions for you!

Condition: used, maximum load weight: 32,510 kg, overall weight: 37,000 kg, axle configuration: 3 axles, first registration: 09/2018, Year of construction: 2018, Equipment: ABS, * ANDOR SVM 38 * 3-axle silo semi-trailer * 3 compartments * 38,000 l * from first owner (DE) * SAF axles * Lift axle Hnodpexyniqjfx Ag Ueg * Disc brakes * Air suspension * ALU rims * Tyres: 60-80% (385/65 R22.5) * etc. Vehicle location: Stuttgart/Wernau ----Please no emails, calls only!!! Interim sale and errors excepted! Extras function without guarantee! We also speak: ENG / ITA / HR / SRB / BiH Your contact: Ludvig Kozuha, mobile WhatsApp, Viber Over 20 years of experience in commercial vehicle trading! - RELIABLE & FAIR - Former DAF contract partner!

Year of construction: 2015, condition: ready for operation (used), Three identical mixing silos are available. Usable volume: 8m³, total volume: approx. 10m³, cylinder diameter: 1500mm, speed: 30rpm. An on-site inspection is possible. Hedexxl I Iopfx Ag Ujng

Condition: new, Year of construction: 2020, Model KPZ-2 Type Closed Working dimensions 900 w. x 1300 h. x 900 d. Hnedsb Al Sbopfx Ag Ueg External dimensions 980 w. x 2100 h. x 1600 d. Operation Electric Power 0,69 kW x 2 Voltage 380 V Frequency 50-60 Hz Filter Polyester Number of filters 3 Filter surface 22,5 m² Fan aluminium Fan 74 dBa Air consumption 10,200m ³/h Warranty 12 months Other models KPZ-4 / 6 / 8 / ... on request

Condition: repair required (used), functionality: limited functionality, Year of construction: 2001, Equipment: compressor, The compressor was operational until recently, but has been out of service for at least 10 years. It must be thoroughly serviced before being put back into use. Hedpfx Aex A Un Esg Ujng

Year of construction: 2023, condition: new, Mill for fine grinding of flour, coffee, dried vegetables, spices and more.. grinding range from 20-120mesh. capacity 100-400kg per hour. engine speed 3400 per min. machine weight 600kg. The power needed to operate the machine is 11kW. The machine has an additional dust filtration extraction. The whole machine is made of SUS304 stainless steel. PayPal payment available!!! Hodpek S Rpujfx Ag Uong

Year of construction: 1996, condition: used, functionality: unexamined, Used Schwaben Liquid Silo – Tank 5000 Liters Connections for cooling/heating water (external) for circulation via internal copper piping Manufacturer: Schwaben Kunststoff GmbH Material: PE-HD Plastic Hnjdpfx Asxiwi Esg Ueg Max volume: 5.0 m³ Manufactured: 1996 Cylinder height: 3000 mm

Condition: excellent (used), Complete silos containing of 4 silo cells, 40m3 each, 160m3 in total.Sold as a set, with all documentation, and complete set of transporters. Hnodpfsxfdavjx Ag Usg Already assembled, ready for loading.

Year of construction: 2013, condition: ready for operation (used), A self-built powder welding machine with a power source Kennametal and an MTA cooler for applying Stellite to valves is available. 1) Cooler MTA TAE EVO 10M, year of construction: 2013, cooling capacity: approx. 3kW, refrigerant: R407, filling quantity: 0.8kg, max. operating pressure: 28bar, flow rate: approx. 0.59m³/h. Machine dimensions X/Y/Z: approx. 600mm/600mm/800mm, weight: approx. 100kg. 2) Power source Kennametal Stellite PTA Junior Star, year of construction: 2013, open circuit voltage: 75V, welding current range: 10A/10V-250A/38V, protection class I. Documentation available. An on-site inspection is possible. Hnjdpsxwn Nlofx Ag Ueg

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Hjdpfx Agjxf Up Ie Ueng

Condition: used, mileage: 770,000 km, power: 368 kW (500.34 HP), first registration: 03/2018, fuel type: diesel, overall weight: 26,000 kg, brakes: retarder, gearing type: automatic, emission class: euro6, loading space volume: 30 m³, Equipment: ABS, air conditioning, compressor, navigation system, parking heater, MAN TGX 26.500 Hnjdpfxsxzxyps Ag Usg First registration: km Automatic transmission Retarder Wheelbase 4500 mm Body: Heiting Year 2001 Compressor type: CS1050, year 2012 30 cubic meters Next tank inspection Tel: We are happy to assist you with financing or leasing EU sales: net price with company documents and VAT number VAT deposit €2,000 we speak English govorimo srpsko-hrvatski Our service for you: - Export license plates - Export documents and EUR1 - Worldwide transport - Accommodation options - Airport transfer (Munich) or train station (Passau) Tel:

Year of construction: 2025, condition: new, functionality: fully functional, - Box Type GAS Oven: Length: 400cm, Width: 200cm, Height: 250cm - Powder Coating Booth With Cartridge Filter: Length: 350cm, Width:150cm, Height:200cm Hjdpov I T Aijfx Ag Usng - Electrostatic Powder Coating Equipment: Painting Spray Gun Model: HMK MULTICOLOR, Type of Use: Manual Electrostatic Powder Coating Plant For those interested. More photos, videos by E-mail, More information by phone.

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Aluminum silo standing on foot ring (plastic granulate (PP) storage silo) - second-hand - designed for a bulk density of 0.8 kg/dm³ Volume: 120,000 liters Available quantity: 1 Diameter: approx. 3,000 mm Cylindrical height: approx. 20,000 mm Total height: approx. 21,250 mm (incl. 1,250 mm roof edge railing) Material: AlMg3 Bulk density: 0.8 kg/dm³ Roof pitch of the upper floor: 15° Equipment and connections: In the top floor: 1 x DN 600 access and ventilation opening with cover 2 x flange DN 100 (filling spout + Silopilot) 1 x 1 1/2" threaded socket (full detector) 1 x roof edge railing with handrail 2 x crane eyes In the shell: 1 x access door 850 x 1800 mm 9 x pipe holder ø 108 mm for filling pipe 1 x DN 100 filling pipe, ending in TW connection at the bottom 1 x cable protection pipe DN 50 Various pipe penetrations in the area of the lower standing frame The silo has a 60° cone at the bottom, which ends in a DN 500 flange. On the underside/cone: 1 x suction cost 1 x 1 x 1 1/2" threaded socket (empty indicator) Hnjdpju I U D Sofx Ag Ueg The currently connected measurement and control technology is included in the above offer. However, no warranty is given for their warranty is assumed! A three-part access ladder with back protection is optionally available (surcharge: € 1,950) Otherwise as per pictures and drawing.