Used Powder Painting Equipment for sale (42,832)

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators. Bwedpfjflmdwsx Agzoi

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. Bedpfxjfz Nb Tj Agzjwi This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. Bedpfofz U S Ejx Agzjwi The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am Bwedpfx Agjfz U Tijzsi How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Condition: used, Year of construction: 2014, functionality: fully functional, workpiece height (max.): 1,500 mm, workpiece length (max.): 7,000 mm, Linija za elektrostatsko plastificiranje aluminijumskih profila – skoro nova, potpuno ispravna i spremna za preuzimanje Prodaje se kompletna automatska linija marke NYS Equipments Co., Ltd., vrlo malo korišćena i u odličnom tehničkom stanju, koja se i trenutno nalazi u komercijalnoj proizvodnji. Linija je idealna za obradu aluminijumskih profila maksimalnih dimenzija 7.000 x 300 x 1.500 mm (DxŠxV) i kapacitetom do 15 nosača/h. Osnovne tehničke karakteristike: ✅ Proces: automatsko elektrostatsko nanošenje praha sa 16 automatskih i 4 ručna pištolja (Corona tip) ✅ Peć za polimerizaciju: gasno grejanje (RIELLO) kapaciteta 700.000 kcal/h, PID kontrola temperature sa preciznošću ±2 °C, unutrašnje dimenzije 11,1 x 7,8 x 2,59 m ✅ Sušara: gasno grejanje kapaciteta 200.000 kcal/h, unutrašnje dimenzije 8,0 x 1,5 x 2,3 m ✅ Transportni sistem: dupli lanac, razmak između nosača 2.250 mm, pogonski motor 3,75 kW, automatska kontrola brzine (0–6 m/min), sistem automatskog podmazivanja ✅ Reciklažni sistem praha: ciklon + after-filter sa automatskim vibracionim sitom, kapacitet ventilatora do 19.263 m3/h, filtracija 24 filtera (long fiber), automatsko čišćenje reverznim vazdušnim mlazom ✅ Kontrola: PLC sa touch-screen komandnim panelom, kompletan nadzor i kontrola procesa (kretanje transportera, temperatura peći, reciklaža) Pogodnosti: – Linija spremna za preuzimanje „viđeno–kupljeno” (it is, as is, where it is) – Mogućnost probe i obuke osoblja pre preuzimanja – Demontaža i transport nisu uključeni u cenu, mogu biti organizovani na licu mesta Cena: 100.000 € ENGLISH: Powder Coating Line for Aluminum Profiles – Almost New, Fully Operational and Ready for Sale We are offering a complete automatic powder coating line by NYS Equipments Co., Ltd., very lightly used, fully operational, and currently in commercial production. This line is ideal for coating aluminum profiles up to 7,000 x 300 x 1,500 mm (L x W x H), with a production capacity of up to 15 jigs/hour. Key Technical Features: ✅ Process: Automatic electrostatic powder coating with 16 automatic and 4 manual corona-type guns Bwjdpfxewvaaij Agzoi ✅ Curing Oven: Gas-fired heating (RIELLO), 700,000 kcal/h capacity, internal dimensions 11.1 x 7.8 x 2.59 m, PID temperature control with ±2 °C precision ✅ Drying Oven: Gas heating (200,000 kcal/h), internal dimensions 8.0 x 1.5 x 2.3 m ✅ Conveyor System: Dual chain design with adjustable jigs (2,250 mm spacing), automatic lubrication, and drive motor of 3.75 kW with adjustable speed (0–6 m/min) ✅ Powder Recovery System: Cyclone and after-filter recovery system with automatic vibrating sieve and 24 long-fiber filters. Fan flow rate up to 19,263 m3/h, automatic reverse air cleaning ✅ Control System: PLC with touch-screen interface, fully automated monitoring and control of spraying, curing, and recovery. Additional Advantages: – Currently in commercial operation, available for inspection and staff training – Sale is “as is, where it is” – Disassembly and transportation are not included, but can be organized on-site Price: €100,000

Condition: used, Year of construction: 2015, functionality: fully functional, The Datacolor 500 is a device representing a spectrophotometer that measures, calculates, and expresses color in a precise and objective manner, making it possible for color to be communicated and reproduced accurately. The spectrophotometer can measure a wide range of materials, including synthetic or natural fabrics, liquids, plastics, paper, metal, painted substrates, and, in some cases, multi-colored materials. In industries such as textiles and apparel, spectrophotometers enable companies to define color standards and tolerances, allowing supplier samples to be compared and measured against these standards. Spectrophotometers measure the wavelengths of light absorbed and reflected by a color sample and then quantitatively convert this data into color values that can be interpreted by color management software. Purchased in 2015 from Datacolor AG, Switzerland. Bwodpfx Ajxrypysgzei

Condition: good (used), We offer guns , cabins , complete plants , used and reconditioned Bjdpfxori R Rle Agzswi

Condition: good (used), Beer / Brewery Production Equipment 9 qty insulated tanks, approx 1000 lts capacity each 2 qty large tanks, approx 1500 lts capacity each All associated pumps, chiller pump units, wash station. 2 qty tanks with lids, approx 1000 lts each 2 qty large tanks with lids, approx 1500 lts each All associated pumps, water filteration system Bjdpfx Agoyg R Azjzowi 2 qty timber clad tanks, approx 1000 lts and 1500 ltd capacity each 2 qty insulated tanks, approx 1000 lts capacity each All associated equipment, heat exchanger, pumps,

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: KB-20211022002, 3 x Hangzhou Kuangbo Machinery Equipment Co. Ltd 2000L beer tanks, previously used as a brite tank but can be used as an FV. Technical Specification: Bsdpfowl H Nijx Agzowi Model - KBBFT1300A. Serial number - KB-20211022002 Date of manufacture - 2021. Capacity - 2000 litres. Notes: All 1.5inch Tri Clamp connections other than DIN PRV port on top, manway door, and larger triclamp Features: Port on top for dry hopping etc. 2x thermowells, one for a thermometer at front and one for temp sensor in back & a CIP arm on the RHS, with sprayball.

Condition: used, Used biodiesel plant made by Biodiesel Fuels Equipment Ltd UK in 2012 and shut down in 2021. Plant capacity is 10,000 litres/8 hour day up to 25,000 litres/day if run for 24hours. Bwodpfx Ageyhc Rgozoi It has been used to process used sunflower and palm oil. Equipment includes: (3) separators, (2) reactors, (2) ionisers, (2) oil preparation vessels, (1) methanol preparation vessel, (1) tank for biodiesel.

Condition: like new (used), Cove Equipment Shredder Model: SH-5 Stainless shredder, continuous process, ideal for chicken and pulled pork, 750Kgs per hour, 1Ph Bwjdpfx Asf N Nd Sjgzoi

Condition: used, Year of construction: 2008, operating hours: 677 h, load capacity: 8,000 kg, lifting height: 4,500 mm, free lift: 298 mm, load center: 600 mm, fuel type: diesel, motor manufacturer: ISUZU, fork length: 1,800 mm, empty load weight: 11,604 kg, total height: 3,550 mm, Equipment: pallet forks, sideshift, Forklift Truck, Used Make: HC Hangcha / EP Equipment Model: CPCD 80 HW 14 Year of manufacture: 2008 (Purchased new) Operating hours: 677 Maximum lifting capacity: 8,000 kg at 600mm load center Maximum lift height: 4.50 m Free lift: 298 mm Fork length: 1,800 mm Bjdpeym Efqsfx Agzjwi Fork width: 160 mm Engine: ISUZU Diesel, 6 cylinders, 6.5l, 84kW Features: - Fork positioner + side shifter - Baumot diesel particulate filter system - Grammer seat - Lighting system - Built-in trickle charger Dimensions: Length: 3.90 m + forks 1.80 m Overall height: 3.55 m Unladen weight: 11,604 kg Condition: The forklift is in very well-maintained, little-used condition and has always been stored indoors. It was purchased new in 2006 and was only used occasionally for loading the company’s own products. - Batteries (2 x 110 Ah) new - Hydraulic hoses new in 2023 - UVV (accident prevention inspection) expired, inspection log available The forklift can be inspected and test-driven by appointment.

Condition: used, This listing is for a Woodley Equipment Clinispin 642E Horizon Centrifuge Bsdpsxzh H Sjfx Agzewi

Year of construction: 2014, condition: excellent (used), Powder / Ingredient Depositors Qty 3 available Bwsdpeurf Tkefx Agzsi Stainless steel Year 2014 In excellent condition

Year of construction: 2001, condition: excellent (used), RICE REDUCTION!!! Instead of 1.150 EUR only 950 EUR!!! Dryer with material conveyor Moretto Type SHD25 power 2940 Watt Bwjdepgultepfx Agzsi Moretto material conveyor Type T 2L Vacuum pump Moretto Type VI T2

Condition: used, machine/vehicle number: 92, Continous Form Collator Micro Pack S 50Serial-No. 92-164 / 1992/51/ mpkc Bwjdpfx Agerbnnpszsi 6 Stationen / Stations Format / Size max. 330 x 12 Zoll umstellbar bis auf 7 Zoll / convertible until 7 inch Standard 240 x 12 Zoll / inch Einlauf breite bis / Infeed width until 55 cm Crimpung alle 2 Zoll mit Ersatzmesser / Crimp every 2 inches with spare blade Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2023, Lifting height ca. 4.500 mm weight 1065 kg battery 24.0 V electric work platform like NEW with only about 10 operating hours (!!) Equipment: - mobile electric scissor work platform - for working at great heights - quick and effortless access to higher work areas - large work surface Bedpfx Agexacf Hozowi - electro-hydraulic lifting height adjustment (infinitely variable) - operation of the chassis + lifting frame effortlessly using a joystick * alternatively from the ground - chassis offers high mobility and stability - charging cable included in delivery

Year of construction: 2024, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: 86-731-85552647/18153792542, We are a company based in 9000 St. Gallen (Switzerland) and imported this planetary ball mill from China in 2024. The unit is brand new and unused. We have switched the machine on and let it run empty for a few minutes to verify its functionality. It comes with 4 x 25-liter nylon containers. Additionally, 120 kg of zirconium beads with a 1 mm diameter are available. ~ Manufacturer's Description: The YXQM series of planetary ball mills for mass production is a machine designed for production applications, built to handle medium-scale capacities to meet industrial requirements. It facilitates the smooth transition of materials from laboratory scale to full production, ensuring consistency and repeatability of processes and thus reliable material quality. The equipment is widely used across new energy, metallurgy, electronics, ceramics, geology, mining, construction materials, chemical industry, light industry, cosmetics, environmental protection, and other enterprise-level material production sectors. Extremely high centrifugal forces inherent to planetary ball mills generate intensive grinding energy, resulting in short milling times. These machines are ideal wherever the quality control process demands the highest standards of purity, speed, fineness, and reproducibility. This series can be equipped with vacuum jars, allowing samples to be ground under vacuum conditions. It is well suited for research tasks at scientific institutes, universities, and industrial R&D laboratories to verify the feasibility of scale-up to mass production, as well as for routine operations such as mixing and homogenizing soft, hard, brittle, or fibrous materials—from laboratory tests through to production. - Key Features: - High-performance, nanometer-scale grinding - Digital display, intuitive operation, precise parameter setting - Variable speeds from approx. 10 to 440/360 rpm, speed ratio 1:2 - Batch processing with up to 4×6/9 L samples, simultaneous processing of 4 materials - Electric lid opening and integrated crane for easy and convenient operation - Storage for 3 modes and 15 programs - Power failure protection with memory function and automatic restart - Suitable for dry, wet, vacuum, and protective atmosphere grinding - Machine stops upon lid opening; automatic interlock prevents accidental release - Equipped with rollers and swiveling feet for easy movement and stable operation Applications: Grinding, mixing, homogenizing, colloidal milling, mechanical alloying, mechanochemistry Fields of Application: New energies, geology/metallurgy, glass/ceramics, engineering/electronics, building materials, environment/recycling, agriculture, chemistry, medical, biology Feed material: Soft, hard, brittle, fibrous – dry or wet Bwodpfx Ajyilnzegzoi Size reduction principle: Impact, friction Feed size: < 5 mm soil, < 10 mm Final fineness: For colloidal milling, samples below 0.1 micron Number of grinding stations: 4 Grinding methods: Dry grinding, wet grinding, vacuum grinding, grinding under protective atmosphere

Condition: new, power: 161.81 kW (220.00 HP), fuel type: diesel, Year of construction: 2024, For Sale: High-Performance NEW BUILD Dredger Perfect for Dredging in Marinas, Harbours, Sand & Gravel Mining Are you looking for a reliable floating dredger to meet your dredging needs? This high-efficiency with low cost suction dredger is ideal for a wide range of applications, including marinas, harbours, and mining operations. Key Features: Powerful Suction System: Ideal for dredging sand, gravel, slurry, and more. Versatile Applications: Perfect for clearing harbours, marinas, and inland waterways. Durable Construction: Built for long-term use in harsh marine environments. Efficient Operation: Maximize productivity in mining and excavation projects. Specifications: Dredging depth: 10 mtr (can be customized to 15 mtr dredging depth) Pump capacity: 450m3/h Engine power: 220hp Suction pipe diameter: DN200 Whether you're managing a marina, expanding a harbour, or working on a sand and gravel mining project, this suction dredger provides the performance and reliability you need. Bjdpou Afi Iofx Agzewi We design and build new dredging equipment, and we also have used dredgers on stock. Contact us today for pricing and more details!

Year of construction: 2007, operating hours: 2,000 h, condition: used, functionality: fully functional, cylinder diameter: 200 mm, pressure (max.): 6,000 bar, machine/vehicle number: 600/55, High-Pressure Food Processing Machine (HPP System) – Wave 6000/55 This high-pressure food pasteurization system (HPP) is a unit designed for batch processing of packaged food using hydrostatic pressure. The machine is fully operational, well maintained, and suitable for research, product development, and low-to-medium volume industrial production. High-pressure processing (HPP) offers significant advantages for food manufacturers seeking to improve product safety, quality, and shelf life without the use of heat or preservatives. By applying up to 600 MPa of hydrostatic pressure to already packaged products, HPP inactivates harmful pathogens such as Listeria monocytogenes, Salmonella, and E. coli while preserving the natural taste, texture, nutrients, and color of the food. This makes HPP an attractive technology for clean-label formulations. In addition, the process typically doubles or even triples the shelf life of many refrigerated foods, reducing waste and improving distribution flexibility. Because HPP is a post-packaging treatment, recontamination risks are minimized, enabling manufacturers to meet stringent food safety standards in domestic and export markets. The technology is suitable for a wide range of products, including meat, seafood, juices, plant-based foods, ready-to-eat meals, and high-value chilled items. The system offers a treatment chamber volume of 55 L, reaching pressures up to 6,000 bar (600 MPa), with automatic basket loading/unloading and an integrated intensifier. It is ideal for enhancing food safety, extending shelf life, and enabling clean-label product concepts. Technical Details Model: Wave 6000/55 Chamber layout: Horizontal Chamber dimensions: Ø 200 mm × 2,000 mm Chamber volume: 55 L Total equipment length: 8,020 mm Maximum working pressure: 6,000 bar (600 MPa) Pressure medium: Water, free of additives Processing water temperature: +5 °C to +30 °C Pressure-build time (0–6,000 bar): 3.9 min Intensifiers: 1 integrated Electrical power: 47 kW (50 Hz) Loading/unloading system: Automatic Total weight: ~20,000 kg Condition and Use Cases The machine is in very good condition and suitable for: Meat, seafood, ready-to-eat meals Dairy, beverages, plant-based products Shelf-life extension and pathogen reduction R&D, validation trials, pilot production Cycles completed (as of Jan 2025): 20,000 Included with the High Pressure Food Processor WAVE 6000/55: High-pressure vessel made of stainless steel, wire-wound with high-resistance cable; horizontal layout with 55 L useful volume Yoke constructed from high-quality steel layers, double-primed and painted Stainless steel vessel plugs Support beds Hydraulic power unit with vessel opening/closing mechanisms Integrated intensifier (1 unit) High-pressure stainless steel piping for intensifier–vessel connection Water filtration system (5 µm) Temperature probe for monitoring processing water via the client fluid circuit Tactile touch screen for automatic and manual operation (interface in German) Electrical control cabinet SCADA system for control and data recording Internet communication module for remote service Bwodpfxex E Utij Agzsi Instruction manual The machine has been used for reasearch purposes and has only done ~20.000 cycles. It is assumed the average cycle length is 6minutes = 2,000 hours All technical specifications and details are provided without guarantee. Subject to prior sale and possible errors or omissions.

Condition: used, Year of construction: 2006, working width: 520 mm, roll width: 520 mm, roll diameter: 1,000 mm, Equipment: documentation/manual, We offer this used ETI Converting Equipment Cohesio ST 520 coater, die cutter, UV silicone coating, flexographic printing press 1 colour, , 11 magnetic cilinders, year of construction 2006. multifunctional equipment that allows self-adhesive materials and labels. linerless 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) 3 unwinders Web width of 520 mm E + L webguides at the infeed and between hotmelt and UV printing unit 2 Corona treatments for two unwiders 2 cleaners UV Curing on 1 Flexo units (UV-Ray), which chilling rolls 2 die cutting units Chiller Working hours 9000 Bjdsyalqyspfx Agzewi Year of production 2006 more information on request If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2022, operating hours: 0 h, condition: new, A highly efficient sand mining dredger with a production capacity of 450 m3/hour is available for new build. This dredger is powered by a Doosan engine (150 kW), and an outer diesel-driven engine can also be used. It can dredge up to 15 meters deep and comes equipped with four hydraulic winches, a water jet pump system, and 150-meter discharge pipes. The dredger's main pontoon dimensions are 6x2x1 meters, and the side pontoons are 11.50 meters long. It is designed for use in shallow waters such as rivers, lakes, channels, docks, and similar environments, making it ideal for cleaning reservoirs, sand stocks, mining arrays, piers, and harbors, particularly when the sand layer is soft. This dredger is easy to transport as it can fit into a single 40ft container. In addition to building new equipment, we also have used machines in stock. Contact us with your project, and we will recommend the best solution for you. Bwodpfsh Ayk Asx Agzsi

Year of construction: 2008, condition: ready for operation (used), The GIF-2000 continuous ice cream freezer (built in 2008) from Gram Equipment is a high-performance freezer that can operate with a capacity of up to 2000l/h. The freezer is mainly used for ice cream or sorbet ice cream, but can also be used for cooling or freezing other liquid products such as yogurt, sauce, etc. The system was in use until September 2023 and was then professionally dismantled for rapid recommissioning. Detailed documentation is available and is included in the offer. Bedpfx Aspyhdtogzswi

Condition: ready for operation (used), Used can manufacturing line for the production of 153 mm milk powder cans. Optional can be quoted for other can sizes as well or can be set to 153 mm food cans. - Krupp Sdvt duplex slitter - Soudronic SBW150 welder Bwedpfxevy Txzj Agzei - Free outside lacquer - Precision tools gas curing oven - Blema KEBS 160 flanger - Klinghammer SIA 180 beader - Angelus 50p seamer

Year of construction: 2017, operating hours: 200 h, condition: excellent (used), functionality: fully functional, Filtration line with the following pieces: -Membrane filter press -Squeezing pump -Feeding pump -Cloth washing pump Bwjdsycqmfopfx Agzji -Cake washing pump -Belt conveyor -Walking platform Technical parameters of the filter press • compressing type: automatic hydraulic system • Plate shifting type: automatic plate shifted one by one • Feeding type: double feeding and center feeding • Filtration area: 500m2 • Chamber Qty: 80 • Chamber volume: 10m2 • Cake thickness: 40mm Plate type; recessed plate Filter plate size: 1000x1000x90/83mm Feeding pressure: