Used Pottinger Novacat 305 for sale (792)

Year of construction: 2010, condition: used, Year: 2010 Condition: good Configuration: - concept with one knife - automatic feeder - automatic vertical unloader - fully automatic adjustment - machine without tooling required - two knives Technical parameters: - max. size (before trimming) - 330 x 241 mm - max. size (after trimming) - 305 x 229 mm - min. size (after trimming) - 148 x 102 mm - max. thickness - 51 mm - min. trimming on all sides - 2.5 mm - number of working programs - 99 - adjustment time - approximately 10 s - max. speed - 200 bindings / h - weight - 680 kg - dimensions - 1520 x 1320 x 1450 mm - connection - 230 V, 50/60 Hz, 3-phase, 20 A or 380/415VAC, 50 Hz 3-phase Dsdpox H Su Tofx Aa Iowc

Condition: new, power: 207 kW (281.44 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, suspension: air, Equipment: ABS, EBS, air conditioning, Mr. Seidel will be happy to assist you with any enquiries regarding the vehicle (by phone). Dwjdpsyfrpmefx Aa Ijc Iveco Eurocargo ML160E28/P 4x2 refrigerated box body with side door and tail lift Tail lift: Bär BC 1500S4 (1,500 kg), Refrigeration: Thermo King T-1200R-50, KIESLING refrigerated box, monotemp, tail lift ref. AN 232393, Length: 7,400 mm, Width: 2,480 mm, Height: 2,400 mm, axle configuration: 2 axles, rear axle drive, cab: standard cab NS, Engine: 280 TY, Transmission: ZF automatic 8AP, Gross vehicle weight rating: 15-16 t, Drive axle: single reduction, single axle, rear axle air suspension, brakes: disc/disc, wheelbase 5,175 mm, Driver Drowsiness Attention Warning system, standard frame overhang, AdBlue tank heating, standard braking system, Electronic Stability Program (ESP), intake air heater for optimal cold start performance in extreme temperatures, reversing camera system, Blind Spot Information System (BSIS) on right, Intelligent Speed Assistance (ISA), Moving Off Information System (MOIS), pneumatic parking brake, 200-litre plastic, lockable fuel tank, plastic steering wheel, heated fuel pre-filter on frame, standard chassis component arrangement, wiring for alcohol interlock (ALC), 30-litre AdBlue tank, Tyre Pressure Monitoring System (TPMS), sensors internal, rear axle ratio 4.13, Lane Departure Warning System (LDWS), Connectivity Box 4G including TCO service contract, voltage converter 24/12 Volt (10.5 Amp), hill start assist (Hill Holder) for comfortable uphill starts, Advanced Emergency Braking System (AEBS), speed limiter 90 km/h, Adaptive Cruise Control (ACC), clothes rail on rear cab wall with adjustable hooks, manual cab tilt device, warning triangle according to ECE-27, front halogen headlights, standard flat-roof cab, radio with Bluetooth, DAB+ and 7" display, mirrors for 2,600 mm body width, mechanical roof hatch, plastic bumper, black cab attachments, fabric-trimmed cab interior, digital tachograph 4.1, white flat roof, rear air suspension, front parabolic spring, 2 wheel chocks, left-hand drive for right-hand traffic, specification for temperate climate, front manoeuvring and towing eye, front underrun protection for chassis with GVW >7,490 kg, grey chassis frame, C-profile steel ladder frame, chassis protection sealing Tectyl 300 G Clear, ZF 8AP1000 automatic gearbox, centrally mounted exhaust tailpipe, air filter unit under cab, EURO VI E emission standard, NOISE ECE 51/03, two-stage engine brake, can be activated via right-hand column stalk, Westinghouse brake, raw air intake without snorkel, heated air dryer for brake system, extension module for PTO control, axle load indicator in cluster, tyres 305/70R19.5, LED tail lights, without battery isolator switch, electrical preinstallation for tail lift operation according to VEHH standard, reverse warning buzzer (deactivatable), 170 Ah batteries (recommended for tail lift and/or PTO use), toll system preparation (OBU), includes antenna and wiring on dashboard without receiver, alternator: 2,880 Watt (24 Volt x 120 Amp), electrical preinstallation for cargo area lighting,...

Condition: used, Platform transport wagon, heavy-duty trailer Industrial trailer with 2-axle swivel steering Manufacturer: PLAN, Type 11 Chassis No.: 31361-1, Year of manufacture 03/2015 Payload: 20,000 kg Unladen weight: approx. 3,760 kg Permissible total weight: 23,760 kg Dwsdpfx Ajztrv Uoa Isc Platform height: 850 mm Platform length: 5,000 mm Platform width: 2,500 mm Overall length: 6,100 mm (without drawbar) Overall width: 2,500 mm Tires: Ø 559 x 300 mm (solid rubber tire 559/305-406.4) - 4 wheels with 2-axle swivel steering - Tracking - Interchangeable drawbar, drawbar can be bolted on at the front or rear - Drawbar with a tow eye size of 40 mm diameter - Small turning radius - Very stable outer frame made of I-beams, height 280 mm, width 95 mm - Very stable steel floor made of 10 mm checkered plate Length for transport: 610 cm (with drawbar folded up) Width for transport: 250 cm Height for transport: 85 cm Weight per trailer: approx. 3,760 kg Good condition 2 units available Price quoted per trailer

Condition: used, mileage: 592,200 km, power: 210 kW (285.52 HP), first registration: 08/2014, fuel type: diesel, tire size: 305/70 R 22.5, axle configuration: 4x2, wheelbase: 5,800 mm, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 9,850 mm, total width: 2,600 mm, Year of construction: 2014, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, spoiler, tail-lift, trailer coupling, = Additional Options and Accessories = - 4x2 - Roof spoiler - Digital tachograph - Refrigeration/freezer unit - Air suspension - Radio/CD player - Reversing camera - Sun visor - Tow hitch = Additional Information = Technical information Number of cylinders: 6 Engine displacement: 7,698 cc Axle configuration Tire size: 305/70 R 22.5 Suspension: Air suspension Front axle: Steerable; Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle: Double tires; Tire tread depth left inside: 60%; Tire tread depth left outside: 60%; Tire tread depth right inside: 60%; Tire tread depth right outside: 60%; Reduction: single reduction Weights Unladen weight: 11,400 kg Dwjdpfx Aaez D Daqj Ioc Payload: 6,600 kg GVW: 18,000 kg Functional Loading area height: 130 cm Refrigeration engine: Diesel and electric (9120 operating hours diesel; 6337 electric) Condition Damage: None

Condition: new, New unit MASS International Conveyor belt NI 1 Flow conveyor/accumulation conveyor Angle-adjustable conveyor belt with hopper in the infeed section Djdjh Nyp Uspfx Aa Ijwc available for short-term delivery Example: NI 1 Length 1500 mm Usable width 250 mm Overall width 305 mm (without motor) Height-adjustable discharge height 600 - 1000 mm Adjustable inclination Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m/min Mobile on steerable stop rollers Optional: other dimensions, see standard delivery list dimensions according to customer requirements FDA-compliant belt modified belt speed etc.

Condition: new, New machine MASS International Model NS1 Angle conveyor / L-shaped conveyor / Conveyor belt Available at short notice Adjustable angle conveyor NS1 with catch plates in the feed section Example as shown: Feed section: 600 mm Rising section: 1300 mm Usable width: 250 mm External width: 305 mm (without motor) Height-adjustable discharge height: 750 - 1050 mm Adjustable angle between feed and rising sections Variable inclination adjustment Cleat height: 30 mm Cleat spacing: 500 mm Djdsuip Ilopfx Aa Ijwc Belt speed: 3 m/min Mobile on steerable locking castors Three-piece hopper plates for feed section The quoted price refers to the NS1. Other angle conveyors in different sizes available to order—see list, image 2. Custom dimensions available upon request.

Condition: new, Year of construction: 2026, functionality: fully functional, Cutting capacity 90° (rectangular) 460 x 250 mm Cutting capacity 90° (round) 330 mm Cutting capacity 60° (rectangular) 205 x 200 mm Cutting capacity 60° (round) 205 mm Cutting capacity 45° (rectangular) 305 x 250 mm Cutting capacity 45° (round) 305 mm Adjustable band speed 48/96 m/min (60 Hz) Saw band dimensions 27 x 0.9 x 3960 mm Power consumption 1.5 / 2.2 kW Machine weight 900 / 1060 kg (net/gross) Dedjz Drarjpfx Aa Ijwc Machine dimensions LxWxH = 2310 x 1070 x 1630 mm

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 81362, travel distance X-axis: 305 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller model: Fanuc 18i-MB, total height: 2,200 mm, total length: 3,300 mm, total width: 2,000 mm, table width: 250 mm, table length: 250 mm, overall weight: 4,600 kg, spindle speed (max.): 15,000 rpm, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Kitamura Mycenter HX250iF, year 2011 Serial number: 81362 *Main spindle bearings replaced 07/2026 - CNC control unit: Fanuc 18i-MB - Spindle power: 11.2 [kW] - Spindle speed: 15000 [rpm] - Travels in X/Y/Z axes: 305 / 305 / 330 [mm] - Rapid traverse (X/Y/Z): 48 [m/min] - Number of tool positions: 40 - Tool holder type: BT30 - Tool change time: 1.2 [s] - Pallet size: 250 x 250 [mm] - Number of pallets: 2 - Maximum weight per pallet: 110 [kg] - Distance center of table/top of spindle: 380 [mm] - Machine dimensions: 3,300 x 2,030 × 2,300 [mm] - Machine weight: 4,600 [kg] Equipment - Manual command - 3-color status light - Coolant tank with high-pressure pump - Oil mist extractor - Chip conveyor Dodpfxexur E Sj Aa Ijwc - Spindle cooling unit - Renishaw 3D probe - Renishaw tool measurement - Transformer - Approx. 150 tool holders

Condition: used, mileage: 1,360 km, power: 175 kW (237.93 HP), first registration: 12/2024, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space length: 7,400 mm, loading space width: 2,470 mm, loading space height: 2,450 mm, Year of construction: 2024, Mercedes-Benz Atego 1624 L with TBV refrigerated box, Thermo King T-1300X, and 2,000 kg tail lift – NEW VEHICLE Refrigerated van / refrigerated truck for fresh produce | Diesel & mains power (standby cooling 400 V) | 18 Euro pallets | Side door | Air suspension | Euro 6 (Atego 1524/1624 series) ??? REFRIGERATED BOX ??? NEW, DIRECT FROM MANUFACTURER (TBV, box no. 12763) ??? - Refrigerated box made of solid plastic with reinforced outer and inner laminates, vapor diffusion tight - Internal dimensions approx.: L 7,400 x W 2,470 x H 2,450 mm (approx. 44.8 m³) - External dimensions of the box approx.: L 7,580 x W 2,590 mm, overall vehicle height approx. 3,680 mm - Space for 18 Euro pallets (1,200 x 800 mm) - Wall thicknesses: Roof, floor and front wall 100 mm, rear wall 80 mm, side walls 60 mm Djdoz El Npjpfx Aa Iewc - Reinforced front wall for refrigeration unit, incl. cable duct - Aluminum grooved floor, welded with aluminum wear strip (285 mm) - 2-leaf rear doors, stainless steel rear portal, locks and hinges made of polished stainless steel, door fastener - Side door on the right at the front, 900 x 2,000 mm, with door fastener and rain deflector - Fold-out 2-stage step under the side door, step on the underrun protection - 1 row of stainless steel lashing rails on the side walls - 3 LED interior lights, switchable from the cab - LED multi-functional lights at the top of the rear portal - "ButtRoll" impact buffer on the rear portal - Hot-dip galvanized subframe - Conductor pipe for reversing camera prepared - Contour marking on the sides and at the rear - ATP certificate [only if confirmed, see note] ??? REFRIGERATION UNIT ??? - Thermo King T-1300X-50, refrigerant R452A - Running cooling (diesel) + standby cooling 400 V (mains operation) - With heating function - Temperature range: [please complete] ??? TAIL LIFT ??? - Dhollandia DH-LM.20, load capacity 2,000 kg, aluminum platform - Platform height 1,800 mm, two-hand control, low-noise hydraulic unit - Roll-off protection for 2 roll containers - Tail lift switch in the cab ??? CHASSIS ??? - Mercedes-Benz Atego 1624 L 4x2, design type 967.027, year of manufacture 12/2024 - Engine OM 936, 6 cylinders, 7.7 l, 175 kW (238 hp), 1,000 Nm, Euro VI E - Mercedes PowerShift 3 (8-speed automatic), driving program economy/power - High Performance Engine Brake - GVW 16,000 kg (front axle 6,100 kg / rear axle 10,500 kg), wheelbase 5,360 mm - Air suspension rear axle with cable remote control, disc brakes all around, EBS with ABS/ASR - Tires 305/70 R 19.5 - Fuel tank 180 l, AdBlue tank 25 l, tanks lockable - 2 batteries 12 V / 165 Ah, generator 100 A - Vehicle according to GSR Phase B ??? CAB & EQUIPMENT ??? - S ClassicSpace cab, extended (2.30 m) - Air conditioning with pollen filter, additional thermal insulation, sunroof - Comfort air-suspended driver's seat with armrests - Cruise control, rain and light sensor, LED daytime running lights - Electric windows, central locking, heated electric main mirror - Radio with Bluetooth and USB - Digital tachograph 2nd generation (Smart Tachograph V2) - FleetBoard Eco Support, Truck Data Center, TruckLive ??? SAFETY & ASSISTANCE ??? - Active Brake Assist 6 - Active Sideguard Assist 2 (turning assistant) - Frontguard Assist - Lane keeping, attention and traffic sign assistant - ESP, tire pressure monitoring, reversing warning system

Condition: new, Year of construction: 2026, machine/vehicle number: ST-150, functionality: fully functional, pressing force: 150 t, stroke length: 450 mm, operating speed: 3 mm/s, reverse speed: 10 mm/s, table width: 1,500 mm, table length: 3,000 mm, table height: 750 mm, distance table to ram: 700 mm, total length: 3,000 mm, total width: 3,000 mm, total height: 2,750 mm, overall weight: 5,000 kg, Equipment: CE marking, documentation/manual, MODEL ST-150 Capacity t 150 Motor power kW 4 Working speed mm/s 2.3 Approach speed mm/s 7.4 Return speed mm/s 10 Maximum pressure bar 305 Piston stroke – J mm 450 Lower table mm 1,500 x 3,000 Head travel – C mm 1,000 Bridge travel – D mm 2,500 Front opening – A mm 1,550 Vertical opening – B mm 700 Working height – E mm 750 Overall front dimension – G mm 3,000 Overall side dimension – H mm 3,000 Overall height – I mm 2,750 Djdoy E Iq Uspfx Aa Ijwc Weight kg 5,000 STANDARD DESCRIPTION: We have designed motorized hydraulic presses with a movable frame and adjustable head from the ST series, offering a range of three different capacities from 80 to 150 tons. Specifically designed for straightening welded structures and plates cut with oxy-fuel or laser. Its design facilitates the loading and unloading of large volumes: parts, plates, or structures. It allows access to different pressure points without the need to move the workpiece, thanks to the lateral displacement of the cylinder and the longitudinal movement of the frame. STRUCTURE AND TABLES: The ST series hydraulic presses consist of an electrowelded structure made exclusively of S355JR steel. It is stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. Calculated and designed using finite element software. All of this guarantees our high standards of precision and quality. The longitudinal travel of the frame. CYLINDER AND HYDRAULIC UNIT: Double-acting cylinder with lapped liner, chrome-plated piston, and maintenance-free wear-resistant guides. Cylinder actuation via a lever-operated hydraulic distributor. It is equipped with a removable wiper to prevent piston damage. Two-speed motorized hydraulic unit with automatic disengagement of the approach speed by hydraulic pressure and a relief valve. ELECTRICAL INSTALLATION AND SAFETY: Electrical installation equipped with a motor guard with emergency stop. Supplied with a glycerin-filled pressure gauge with reading in tons and hydraulic oil. Complies with and meets all essential safety and health requirements according to CE regulations. Supplied with an instruction manual.

Condition: used, mileage: 572,275 km, power: 206 kW (280.08 HP), first registration: 06/2015, fuel type: diesel, tire size: 305/70R22.5, axle configuration: 4x2, wheelbase: 6,800 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 8,720 mm, loading space width: 2,480 mm, loading space height: 2,590 mm, Year of construction: 2015, Equipment: air conditioning, electric window regulation, spoiler, tail-lift, Tyre size: 305/70R22.5 Dodpsz E R Dljfx Aa Ijwc Front axle: Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Drive: Wheel Number of cylinders: 6 GVW: 19.000 kg Make of engine: Renault Tail lift: D HOLLANDIA, slider lift = Additional options and accessories = - Roof spoiler

Condition: used, maximum load weight: 11,260 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2014, next inspection (TÜV): 04/2026, loading space length: 7,275 mm, loading space width: 2,493 mm, loading space height: 2,280 mm, total length: 9,330 mm, total width: 2,600 mm, total height: 3,780 mm, Equipment: ABS, tail-lift, RZK? THROUGH-LOAD? SWIVEL TAILGATE? PALFINGER LBW? ----VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST ----Vehicle Data Manufacturer: ROHR Commercial Vehicles * Type: RZK/18 IV * Vehicle Type: 2-axle through-load refrigerated box trailer * Year of Manufacture: 2014 * First Registration: 10.02.2014 * Vehicle Identification Number (VIN): W09361000D1R12808 * Order Number: 361 D1 808 Dsdpfx Aaozv Ax Eo Iswc * Body Number: 305 821 * Box Type: RA-B * Permissible Total Weight: 18,000 kg * Permissible Axle Load, Axle 1: 9,000 kg * Permissible Axle Load, Axle 2: 9,000 kg * Permissible Overhang Load / Vertical Load: 1,000 kg * External Length: approx. 9,330 mm * External Width: approx. 2,600 mm * External Height: approx. 3,780 mm Internal Dimensions Internal Length: approx. 7,275 mm * Internal Width: approx. 2,493 mm * Internal Height: approx. 2,280 mm Body Insulated refrigerated box body * Through-load design * Pneumatically / air-operated opening front wall * Swivel tailgate at the front * Swivel tailgate type: DLE 31-A * Swivel tailgate year of manufacture: 2014 * Aluminum floor * Code-XL body / cargo securing * Storage box * Underrun protection * Rear view camera Refrigeration Unit Manufacturer: Frigoblock * Model: EK 13 U * Year of Manufacture: 2013 * Refrigerant: R410A * Refrigerant Quantity: 6.5 kg * Maximum Pressure: 42 bar * Voltage: 400 V * Frequency: 50 Hz * Control Voltage: 24 V Chassis / Braking System 2 axles * Air suspension * Disc brakes * Tires: 385/65 R22.5 160J Tail Lift Manufacturer: MBB Palfinger GmbH * Model: 2500K * Load Capacity: 2,500 kg * Device / Serial No.: 83464752 * Year of Manufacture: 2013 Coupling Device WAP Drawbar * Type: WLZD210TK * Design: A1K * D-value / Dc: 140 kN * Vertical Load S: 1,000 kg * V-value: 56 kN * Identification No.: 2711612-2 * Year of Manufacture: 2013 Fifth Wheel Coupling Manufacturer: Ringfeder / VBG Group * Type: D40-S / Type 440 * D-value: 125 kN * Dc-value: 100 kN * Vertical Load S: 1,000 kg * V-value: 40 kN * Year of Manufacture: 2022 ----* EXPORT SALES ONLY WITH DEPOSIT MIN. 500 EUR * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 EUR - 2000 EUR EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (APPROVED EXPORTER) 5 DAYS, 15 DAYS, 30 DAYS LICENSE PLATES AND 15 DAYS AUSTRIA LICENSE PLATES EURO 1 TECHNICAL DATA SHEET VEHICLE RESERVATIONS PLEASE ONLY VIA THE E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID A deposit of at least 500.00 EUR / 1,000.00 EUR will be charged for sales to the EU and third countries. Changes, errors and prior sale reserved! You can find more vehicles on our website. Sales are exclusively subject to our general terms and conditions - see homepage. Important note - Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal Notice: This sales advertisement does not constitute an offer in the sense of Section 145 of the German Civil Code (BGB). Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: new, Comparable with Behringer, Kaltenbach, Kasto, Jaespa, etc. 2-column guided bandsaw, semi-automatic model with stepless mitre adjustment on both sides, 30° - 45° - 90° - 135°. With patented mitre system (ERP No. 0491120). Particularly suitable for universal applications with various cross-sections, materials, and frequent mitre changes. The pivot point remains unchanged at any angle setting, allowing precise length measurement at 90° and in the mitre range. MEBA Eco-Saw-Innovation 2000 The universally applicable mitre bandsaw MEBA 335 DG is ergonomically advanced and offers an optimal price-performance ratio. Easy, centralised operation. The machine controls comply with CE standard 89/289. Technical Data: Cutting range: round/flat 90° 335/500x335 mm 45° right 330/305x335 mm 30° right 180/170x335 mm 45° left 305/305x335 mm Cutting speed: AC frequency-controlled drive 15-150 m/min, steplessly adjustable via operator panel Drive - Saw band: 3 kW; 400 V, 50 Hz - Hydraulic: 0.55 kW - Coolant pump: 0.11 kW Dwsdpfx Aast Dpw Rs Ijc Saw frame feed: Stepless up to 300 mm/min, hydraulically controlled Saw band tension: Mechanical with torque wrench Saw band dimensions: 4400 x 34 x 1.1 mm Working height: 750 mm (without base elements) Weight: 1320 kg Bfpzm8E9K3 Dimensions (LxWxH): 1450 x 2350 x 1900 mm Technical modifications reserved. Standard equipment of the MEBA 335 DG-500 Semi-automatic sawing cycle with workpiece clamping - sawing - frame returns to preset height after completed cut MEBA High-Performance Package: Stepless hydraulic cutting pressure and feed monitoring at the blade back. This ensures optimal conditions for any sawing task, i.e., constant pressure for solid material and constant feed for thin-walled sections. Manual mitre adjustment with digital readout, accuracy to 0.1° Rapid lowering of the saw frame to the material edge via pushbutton Patented double mitre system (ERP No. 0491120) Unique double mitre bandsaw where mitres on both sides can be quickly and economically set by swiveling the saw frame and material support. Automatic movement of the clamping vices and digital mitre setting. The material vice automatically moves in the cutting direction to suit the desired mitre, ensuring the workpiece is always clamped square and close to the saw blade. The pivot point for mitre is at the intersection of the saw blade and fixed vice, so length measurements remain accurate regardless of angle. Hydraulic full-stroke workpiece clamping. Quick-clamping for material. At every saw frame angle, the material is clamped parallel at 90°. Rigid two-column linear guided saw frame Saw blade inclined 3° to the material support surface. Centralised machine control Saw frame clearance height adjustment Adjustable moveable blade guide arm for material width Carbide blade guide for band deflection wheels Synchronised chip cleaning brush Saw band tension with torque wrench Operating manual and spare parts list CETOP hydraulic system Coolant system (approx. 100 ltr.).

Condition: used, Three Knife Trimmer Kolbus HD 140.P with Copilot and automatic infeed Dreimeserautoat / Three Knife Trimmer Kolbus HD 140 P Baujahr / Year 2000 - Serial-No. 347 Format / Size max 305 x 420mm Dwedeyb Swvopfx Aa Isc Formatbereich beschnitten / Size (trimmed) min. 100 x 100mm - max. 300 x 400mm Buchblock Stärke / Book block thickness min. 2mm - max. 80mm Stapelhöhe / Feeding height 80mm Mechanische Laufleistung / Speed max. 3.900 c/h Rechtseinfuhr / Infeed from right Equipment: Copilot automatic infeed automatical speed Regulation automatic lock of knife adjustment and pressing block automatic setting of bookblock pressure Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2026, machine/vehicle number: P784, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, pressing force: 230 t, stroke length: 315 mm, operating speed: 180 mm/s, reverse speed: 150 mm/s, table length: 3,100 mm, throat depth: 305 mm, distance table to ram: 500 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, overall weight: 20,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, The all-rounder with extra power! The High Quality Press Brake, or HQPB for short, is the top model in the Placke range of press brakes. The entire manufacturing process, from the hydraulic cylinder to the construction of the control cabinet, takes place in-house. By using state-of-the-art technology, combined with many years of experience in the field of forming technology, the HQPB series enables you to perform bending operations at the highest level. Even the standard basic model is a fully functional press brake. This combination of safety, reliability, and efficiency, coupled with user-friendly operation, allows us to meet the highest requirements and achieve maximum precision in the bending process. Press force: 2,300 kN (230 t) Working length: 3,100 mm Clearance between uprights: 2,600 mm Installation height: 450 mm Overhang: 305 mm Ram stroke: 265 mm Height of lower bed above floor: 850 mm Rapid traverse max.: 200 mm/s Pressing speed max.: 9.8 mm/s Retraction speed max.: 150 mm/s Positioning accuracy of ram: ± 0.01 mm Ram inclination: ± 10 mm (electrically limited to ± 5 mm) Motor power: 18.5 kW Hydraulic oil tank capacity: 290 l Operating voltage: 400 V / 3 Ph / 50 Hz Machine weight: approx. 17.5 t Description: > Machine body Steel S 355 N, design based on FEM analysis Side stands with two pressure cylinders, above-floor 2-component structural paint, RAL 7004 / 7016 > Hydraulics & Upper beam Proportional control valve, electronically monitored cylinder synchronization Double upper beam guide, Heidenhain scales Separate Y1/Y2 control, inclination monitoring > Tooling Top: WILA hydraulic, NSCL-II-HC Dodpfx Aaoz Hnzkj Iewc Bottom: narrow table, single V (13 × 20) 2 aluminum support arms at the front, approx. 600 mm, height-adjustable > Crowning Centrally adjustable, hydraulically-dynamically, CNC-controlled Active control loop keeps the lower bed in the zero position Constant bending angle > Back gauge 4 axes X-axis 1,100 mm, 400 mm/s, ± 0.01 mm R-axis 200 mm, 200 mm/s, ± 0.01 mm Z1 + Z2 CNC, 850 mm/s, ± 0.02 mm, finger distance min. 50 mm > Control Delem DA 66S 24″ touchscreen on the swivel arm 2D programming, 3D visualization DXF import, tandem operation > Safety & Efficiency CE compliant, Pilz safety PLC TFS laser light curtain, rear light curtain eco-MODE start-stop automatic > Additional equipment Air conditioning in the control cabinet LED work area lighting at the rear Remote diagnostics for Delem control and Pilz PLC

Condition: used, round bar steel 34 mm square edge steel 30 x 30 mm L-beam 100 x 10 mm flat steel 100 x 14...160 x 11 mm blade length 175 mm T-beam 100 x 10 mm Djdpfxjyh Rnke Aa Ijwc notching: l + T material 10 mm hole punhing press: pressure 45 t throat 305 mm total power requirement 3 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 0,8 x 1,5 m * 5-fold combinated profile steel shear incl. flat steel shear profile steel shear bar steel shear notcher hole punch * 2 foot switches * contact limit stop * various punching saddles

Condition: used, mileage: 811,100 km, power: 217 kW (295.04 HP), first registration: 02/2012, fuel type: diesel, empty load weight: 7,800 kg, maximum load weight: 10,200 kg, overall weight: 18,000 kg, axle configuration: 4x2, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: air, loading space length: 6,650 mm, loading space width: 2,500 mm, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, onboard computer, soot filter, tail-lift, trailer coupling, Renault Midlum 300.18 4x2 Machinery Transporter First registered: 2/2012 881,100 km Short cab Manual transmission Air conditioning Trailer coupling Powerful 300 hp 6-cylinder engine with 7146cc displacement Air suspension front and rear Tires 305/70 R22.5, approximately 50% tread Flatbed: 6650mm (5750mm straight + 950mm angled) Ramp, split: 3550mm (2450mm + 1100mm) Loading width: 2500mm Loading height: 1100mm Winch Dedpfx Aez Hckaea Iswc Permissible total weight: 18,000 kg Unladen weight: 7,800 kg Payload: 10,200 kg Export/net price: 16,900 Euros All information without guarantee, subject to change.

Condition: ready for operation (used), functionality: fully functional, control type: manual, actuation type: hydraulic, Geka (Spain) Hydraulic Punching, Shearing, and Notching Machine Model: Hydracrop–55/110A Year of Manufacture: 2001 Flat Bar Shear Capacity: 300 x 15 mm / 200 x 20 mm Blade Length: 305 mm Square: 25 mm Working Height: 880 mm Angle Shear Capacity: 1100 kN Deformation-free Angle Iron: 120 x 120 x 10 mm Angle Iron 45° Shear: 70 x 70 x 7 mm Round and Square Bar Shear Round Steel: 40 mm Square Steel: 40 mm Notcher Sheet Thickness: 10 mm Angle Iron: 100 mm Notch Depth: 90 mm Notch Width: 42 mm Punching Station Capacity: 550 kN Maximum capacity with quick-change system: Ø 40 x 10 mm / Ø 20 x 20 mm Throat Depth: 250 mm Stroke Length: 60 mm Working Height: 1085 mm General Specifications Number of strokes per minute at 20 mm stroke: 25 Power: 3 kW Net weight: 1320 kg Gross weight: 1518 kg Dimensions (L x W x H): 1600 x 1100 x 2000 mm Machine Details - 2 cylinders: one for the punching side, one for the shearing side - Punching unit with quick-change system - C-frame die holder + extra support - Nipple and die up to Ø 40 mm selectable - Flat bar shear incl. support table and 45° and 90° guides - Angle shear - Round and square bar shear (suitable for mounting U and I profiles as well) - Rectangular notcher - Emergency stop - Key switch for notcher safety - Selector switch for deep or shallow punch/shear operation - Selector switch for foot pedal / back gauge - Stroke adjustment for punch and shear side - 2 foot pedals - Scrap collection tray for punch slugs - Dutch instruction manual Includes: Punch table incl. back stops Notching table incl. back stops Electric length stop 1000 mm 30 sets of punch nipples Price of the Geka Hydraulic Punch/Shear/Notch Machine: €16,500 Machine is as new, original paint, like new, original finish Delivery conditions: Delivery time: from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV cannot be held liable for discrepancies between the technical specifications in this offer and the actual machine, accessories, and/or parts. Machines, accessories, and parts are sold as-is and as known to the buyer. We cannot provide a warranty for used machines, accessories, and parts. Delivery terms: Delivery time: ex stock, excluding VAT Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe that stocks and sells primarily used Kardex Remstar automatic lift and rotating warehouse systems. We install and/or dismantle these systems safely with VCA-certified engineers and have been doing so for more than 33 years. Best regards, Antoine de Leeuw Machinehandel De Leeuw BV Dwjdpfx Ajyxpawea Ioc Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands VAT No.: NL800103026B01 Chamber of Commerce Tilburg 18034279

Condition: ready for operation (used), Year of construction: 1989, total width: 4,000 mm, overall weight: 5,000 kg, workpiece diameter (max.): 140 mm, product length (max.): 2,000 mm, number of axes: 2, This Schaudt Mikrosa SASL 125 was manufactured in 1989. A centerless external grinding machine, it features NC-controlled operations and hydrodynamic axis bearing. Both wheels can be dressed via a controlled axis. Refurbished by UHLMAN Werkzeugmaschinen-Service in 2021/22, it has been regularly maintained. Consider the opportunity to buy this Schaudt Mikrosa SASL 125 centerless grinding machine. Contact us for more information. Retroffited & Overhauled in 2021/22 Working range: • Maximum workpiece diameter • that can be ground • with a grinding wheel Ø 500 mm: 140 mm • Maximum workpiece diameter • that can be ground • with a grinding wheel Ø 630 mm: 80 mm • Minimum workpiece diameter that can be ground: 3.5 mm • Maximum workpiece length for through-feed grinding: 200 mm • Maximum workpiece length in plunge grinding 245 mm • Maximum grindable profile depth on the workpiece 25 mm Grinding wheel: Dwjdpjx Enapefx Aa Ioc • Maximum outer diameter 500 or 630 mm • Minimum outer diameter 380 mm • Maximum grinding wheel width 250 mm • Grinding wheel bore 305 mm • Guide wheel: • Maximum guide wheel outer diameter 315 mm • Maximum guide wheel width 250 mm • Bore diameter 127 mm Power requirements: • Power consumption approx. 33 kW Additional equipment • Optional: Additional equipment available Machine Benefits Technical Machine Benefits • Hydrodynamic axis bearing • Regular maintenance during series production

Condition: ready for operation (used), Year of construction: 2022, operating hours: 389 h, spindle speed (max.): 2,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, spindle motor power: 30,000 W, total height: 1,915 mm, total width: 2,035 mm, overall weight: 5,650 kg, product length (max.): 3,821 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D control touchscreen with ShopTurn 15-inch display • 3-axis CNC horizontal turning machine with driven tools and tailstock • C-axis main spindle: 360° resolution 0.001° • C-axis speed: 200 rpm • C-axis torque: approx. 1162 Nm • Swing diameter over bed: 720 mm • Swing diameter over cross slide: 590 mm • Max turning diameter: 376 mm • Max turning length: 725 mm • Main spindle bore: 115 mm • Bar capacity: 103 mm • Spindle nose: ASA A2-11 • Max torque: approx. 1112 Nm • Rapid traverse X-axis: 24 m/min • Rapid traverse Z-axis: 30 m/min • Feed force X-axis: 9465 N • Feed force Z-axis: 17379 N • Three-jaw power chuck diameter: 305 mm with soft jaws • 12-station tool turret with BMT65P tool holders • Max driven tool speed: 5000 rpm Dwjdpfey E I Hijx Aa Ijc • Driven tool power: approx. 7.7 kW • Driven tool torque: approx. 75 Nm • Tailstock with quill diameter: 100 mm • Quill stroke: 100 mm • Hydraulic clamping system with hollow cylinder • Monoblock cast iron machine bed, Meehanite construction • 30° slant bed design • Hardened and ground guideways with low-friction coating • Automatic central lubrication • Coolant system: 7 bar pressure • Coolant tank capacity: approx. 235 liters • Hydraulic tank: approx. 20 liters • Full enclosure with working area lighting • Bar feeder interface • Oil skimmer • Electronic safety clutch for X and Z axes • Electrical connection: 400 V, 3-phase, 50 Hz • Total power: approx. 47 kVA • Unused (like new) • OPTIONAL: HALTER LoadAssistant Universal Big 70 (Robot) • Gripper for Doosan Universal Big 70 • Rotation Station • Workpiece Support • Base Plate 23 mm / 175 mm Big 70 • Machine Interface Box • () Technical Specification Counter Spindle No Driven Tools Yes

Condition: refurbished (used), Year of construction: 2015, operating hours: 2,552 h, load capacity: 1,600 kg, lifting height: 122 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,400 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 305 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically refurbished to meet FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Warehouse truck data: Manufacturer: Jungheinrich Type: Low lift pallet truck EJE 116 Drive type: Electric Load capacity: 1,600 kg Year of manufacture: 2015 Operating hours: 2,552 Lifting height: 122 mm Mast type: None Initial lift: Yes Overall height: 1,400 mm Fork length: 1,150 mm Unladen weight: 305 kg Load center: 600 mm Tires: Polyurethane Model type: EJE 116 Battery type: PzS Voltage: 24 V Battery weight: 160 kg Dwedpfxjz Ikdws Aa Iec Charger: Charger integrated

Condition: used, Year of construction: 1980, functionality: fully functional, grinding length: 5,000 mm, grinding wheel diameter: 750 mm, grinding diameter: 580 mm, workpiece weight between centers: 4,000 g, Used Gioria RU/S 5000 External Cylindrical Grinding Machine – High-Precision Grinding Technology for Large Parts Available from August 2025 – Viewing under power possible! This robust and precise Gioria RU/S 5000 external cylindrical grinding machine was developed for machining workpieces up to 5,000 mm long and 4,000 kg in weight. With its hydrostatic grinding spindle bearings and a powerful 20 kW drive, it offers the highest precision and excellent grinding results – ideal for use in heavy-duty machining and the production of high-precision components. 🔹 Key Features: ✔ Max. grinding diameter: 580 mm ✔ Grinding length: 5,000 mm ✔ Workpiece weight: up to 4,000 kg ✔ Hydrostatic grinding spindle bearings for vibration-free operation Dsdpsv Tnhwsfx Aa Iowc ✔ Large grinding wheel diameter 750 mm for efficient material removal ✔ Continuously adjustable workpiece spindle speed (10–180 rpm) for optimal adaptation to different workpieces ✔ Hydraulic table drive (0.05–4.0 m/min) for precise longitudinal movements ✔ Digital display for the X-axis for exact feed Powerful features for maximum efficiency The machine is equipped with extensive accessories, including: ✅ Coolant cleaning system with paper belt filter (tank capacity: 450 liters) ✅ 6 grinding wheel holders for flexible machining options ✅ 8 steady rests for stable workpiece guidance during long machining operations Components ✅ Dressing device positioned on the tailstock for precise dressing of the grinding wheel Ready for immediate use – viewing available in Stuttgart! This machine is currently still live and can be demonstrated. Further data: Center height 300 mm Center width 5000 mm Max. workpiece diameter 580 mm Max. workpiece diameter with steady rest 30 – 400 mm Max. workpiece weight between centers 4000 kg Machine taper in the workhead: MT 6 Machine taper in the tailstock: MT 6 Operating voltage 400 V/ 50 Hz Machine weight approx. 20,000 kg Space requirement approx. 13 x 3.5 m Grinding wheel headstock Grinding spindle drive 20 kW Hydrostatic grinding spindle bearing Grinding wheel, max. 750 x 100 x 305 mm Grinding wheel peripheral speed, max. 1 – 34 m/sec. (for wheels Ø 750 mm) Workhead Speed range, continuously adjustable 10-180 rpm MT 6 taper chuck Swivel range +/- 45 degrees Worktable Hydraulic table drive – continuously adjustable 0.05 – 4.0 m/min Worktable swivel range +/- 4 degrees Tailstock Hydraulic quill stroke Quill stroke 90 mm MT 6 center chuck Dressing device positioned on the tailstock Coolant purification system Coolant tank with pressure pump and paper belt filter Tank capacity 450 liters 📍 Delivery: Free on truck from site 📅 Available from August 2025 ⚙ Warranty: None, as this is a used machine Take advantage of this opportunity to acquire a high-quality cylindrical grinding machine for your production. Perfect for large and heavy workpieces – secure this machine now for precise grinding at the highest level!

Condition: used, mileage: 371,811 km, power: 175 kW (237.93 HP), first registration: 06/2018, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 37 m³, loading space length: 6,200 mm, loading space width: 2,490 mm, loading space height: 2,380 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, ATEGO 1524 L refrigerated box truck, 6.30 m, with swing doors and 1-ton underfold tail lift. * FRIGOBLOCK FK 13 road and stationary cooling, 380 V electric * Longitudinal partition wall = Bi-zone with two temperature areas Djdpfxjxpy Tgs Aa Iowc * Vehicle No. for customer inquiries: 4464 * Euro VI engine with OBD-C * Active Brake Assist * Rear axle differential lock * Air conditioning * Air suspension on rear axle * Lane Departure Warning * Environmental sticker (green) * Tail lift * Full service history * Stability Control Assist (ESP) * Auxiliary hot-air heater, 2000 W * Electronic braking system with ABS and ASR * Comfort driver's air-sprung seat * Electric windows, both sides * 16.02 t weight variant (6.1/10.5) * Mercedes PowerShift 3 * Engine brake, standard * Central locking system * Digital tachograph, EC-compliant, RPM * Cruise control * Two-seater cab * 25 L AdBlue tank * 24 V, 15-pin trailer socket * Roof hatch/ventilation flap * Gearbox G 140-8/9.30-0.79 * 16.0 t weight variant (6.1/10.5) * Driver's side electric main mirror * Heating, electronic air supply unit * 120 L plastic fuel tank, left * Engine OM936, inline 6, 7.7 L, 175 kW (238 HP), 1000 Nm * Cross member for G145 trailer coupling * Wheelbase 4,160 mm * Tubeless tires, 305/70 R 19.5 VA * Inline 6-cylinder engine * S-Cab ClassicSpace, 2.30 m, tunnel * Rear axle under-frame stabilizer * Parabolic front spring, 6.1 t * CB radio prep, 12 V, DIN slot * Toll device prep * Maintenance documentation * Tail lift remote control prep * Cabin paint assignment, finish line 1 * Engine front shaft, Frigogenerator AW22.5 prep * 2/3-door configuration No liability for printing or typographical errors Sale to businesses only Subject to prior sale and changes. All information is given to identify the vehicle and does not constitute a legal warranty. Binding details are those in the purchase contract. * TOP SERVICE + QUALITY * We are happy to provide LEASING, FINANCING, or HIRE PURCHASE offers Warranty insurance available upon request through insurer * TÜV inspection / LBW (tail lift) UVV / tachograph testing and OBU device installation available through our local partners * 30-day export license plates All customs documents for export possible, please inquire individually * TOLL for Toll-Collect can be booked on site * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * ---- Visit our website * Over 200 vehicles always in stock

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 406 mm, travel distance Y-axis: 356 mm, travel distance Z-axis: 381 mm, table width: 305 mm, table length: 914 mm, table load: 227 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,200 W, number of slots in tool magazine: 31, tool weight: 5,400 g, number of axes: 3, This 3-axis HAAS Super Mini Mill was manufactured in 2024. It features impressive travels of 406 mm in the X-axis, 356 mm in the Y-axis, and 381 mm in the Z-axis. The machine includes a robust table size of 914 x 305 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill vertical machining centre we have for sale. Contact us for further details. • Condition: Showroom machine • Working hours: 0 • Spindle nose to table: max 19.0 in / 483 mm; min 4.0 in / 102 mm • Spindle max torque: 22.0 ft-lbf @ 5000 rpm / 29.8 Nm @ 5000 rpm • Spindle drive system: Direct Speed, Belt Drive • Spindle bearing lubrication: Air / Oil Injection • Spindle cooling: Air Cooled Dwodez Nxwispfx Aa Ioc • Table length: 36.0 in / 914 mm • Table width: 12.0 in / 305 mm • Table T-slot width: 0.626 in to 0.630 in / 15.90 mm to 16.00 mm • Table T-slot center distance: 4.33 in / 110 mm • Number of standard T-slots: 3 • Max cutting feedrate: 833 ipm / 21.2 m/min • Rapids (X/Y/Z): 1200 ipm / 30.5 m/min • Max thrust (X/Y/Z): 2000 lbf / 8896 N • Tool changer type: Side-Mount Tool Changer (SMTC) • Tool changer capacity: 30+1 • Max tool diameter (full): 2.5 in / 64 mm • Max tool diameter, large (adjacent empty): 5.0 in / 127 mm • Max tool length (from gage line): 7.00 in / 178 mm • Tool-to-tool (avg): 2.80 s • Chip-to-chip (avg): 4.20 s • Coolant capacity: 45 gal / 170 L • Air required: 4 scfm @ 100 psi / 113.0 L/min @ 5.5 to 6.9 bar • Inline air hose & coupler: 3/8 in • Input AC voltage (3 phase) - Low / High: 220 VAC (30 A) / 440 VAC (15 A) • Shipping dimensions: 90.0 in x 80.0 in x 99.0 in / 229 cm x 203 cm x 252 cm • Shipping weight: 4650 lb / 2109.2 kg Technical Specification Taper Size BT 40

Condition: new, -Continuously adjustable sanding unit (0 - 90°) for vertical and horizontal sanding Dedpfx Aasvxkv Us Ijwc -Oscillating sanding belt for better sanding results and a longer service life of the sanding belt -Quick and easy sanding belt change via quick-clamping system -Grinding sole with graphite coating as standard for a longer service life of the sanding belt -Work table made of gray cast iron adjustable via handwheel with T-slot -Including side sanding sleeve device for sanding curves and radii -Two suction nozzles Ø 100 mm -1x sanding belt 2750x 150mm grain 80 -1x sanding sleeve Ø38mm grain 80 -1x sanding sleeve Ø50mm grain 80 -1x sanding sleeve Ø75mm grain 80 Dimensions and weights: - Length (product) approx.: 1515 mm - Width/depth (product) approx.: 550 mm - Height (product) approx.: 1150 mm - Weight (net) approx.: 207 kg Extraction connection: - Extraction nozzle diameter: 100 mm Work table(s): - Work table length: 900 mm - Work table width: 305 mm - Work table height adjustment: 120 mm Electrical data: - Connection voltage: 400 V - Mains frequency: 50 Hz Grinding unit: - Sanding belt length: 2750 mm - Sanding belt width: 150 mm - Belt rotation speed(s): 16 m/s - Oscillation stroke: 15 mm - Sanding surface length: 1010 mm - Sanding surface width: 190 mm - Sanding height max.: 170 mm - Sanding unit swivel: 0 – 90 ° Workpiece: - Workpiece width max.: 1010 mm - Workpiece height max.: 150 mm - new exhibition machine -