Used Pool for sale (227)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, welding current (min.): 1 A, welding current (max.): 400 A, Migatronic Sigma Select 400 A Model S Mig/Mag CO2 Welding Machine Neat and well-functioning machine Version: Model S with MFW30 separate wire feeder and graphic control panel. In short, a super deluxe, reliable, and complete unit 15 to 400A current range 400V Almost full spool of wire included Without gas cylinder Location: Hamont-Achel, Belgium Transport available at additional cost Check out our other listings as well Chjdpfx Asw Uqutjbbsf We are also seeking industrial machines year-round. Do you have surplus machinery? Email us with photos and information. The seller is not liable for typing or data transfer errors. The machine's appearance, technology and wear are consistent with its age; used machines are sold without warranty.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Cjdpfxew Ucyuj Abbjhf Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: excellent (used), Year of construction: 1999, Proven veneer splicing machine, veneer stitching machine by Kuper FW/M 630 T Throat depth: 630 mm Power connection: 230V Foot pedal control 1 spool of glue thread Threader Separator Chedpfx Asq Umw Eobbjf The machine is set up and ready to use immediately. CE marking Operating manual The machine can be demonstrated on site by appointment. We only offer machines that are demonstration-ready in our warehouse; see also 'more offers from this supplier.'

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, paper weight (min.): 90 g/m², paper weight (max.): 300 g/m², control type: PLC-controlled, No minimum price – guaranteed sale to the highest bidder! Submission of a bid obligates the buyer to collect the item by 17.10.2025! As the machine is floor-level, removal is straightforward. TECHNICAL DETAILS Output: 1,500 to 9,000 cycles/h Formats Feeder untrimmed: 92 x 128 mm to 311 x 355 mm Final fold: 5 to 25 mm Pre-fold: 8 to 16 mm Cover feeder unfolded: 160 x 128 mm to 622 x 355 mm Cover feeder folded: 89 x 128 mm to 311 x 355 mm Paper weight: 90 to 300 g/m² Trimmer 3-side trim: max. 50 mm 3-knife trim untrimmed: 89 x 120 mm to 305 x 349 mm, max. thickness 10 mm Production range: up to oversize A4 format EQUIPMENT Patented register stop belt for gentle material handling PLC control system 3x Double vertical feeders (DVA) 2 feeder stations on one shaft Modular design for processing with suction or gripper opening Miss-sheet detection on delivery blade Cover feeder UFA HS400 control cabinet Vacuum pump for DVA/UFA DVE Chedoxb Dvcepfx Abbjf Vacuum pump VE Wire spool device DAS20 Transfer mark table Shingled delivery SA Manual single-sheet feeder Staple monitoring from below 2x loop stitching heads: 52-L6 Stapling machine HM100 Universal end stop Miss-sheet collection tray

Condition: used, Brewing plant with stainless steel 5-device brewhouse (manufacturer: Nordhausen) with an output of 10 hl, with 2-roll grist mill, wort cooling, wort aeration and hot water tank. Fermentation, storage and pressurised tank cellar with: - 7 pieces 25 hl ZKGs (Nordhausen, 2009) coolable, insulated with firmly welded stainless steel panelling - 6 upright storage tanks, 10 hl - 1 upright storage tank, 50 hl, manufacturer Metrec) - 1 upright storage tank, 40 hl, manufacturer Metrec - 1 horizontal pressurised tank (Kaspar Schulz, 1994), 37 hl, 3 bar - 1 yeast tank (Nordhausen, 2012), 3.5 hl, 2 bar, insulated, conical, with content measurement. Filtration with mobile kieselguhr filter and Pall particle filter. With mobile CIP system (Nordhausen, 2009) with 2 tanks of 1.6 hl each in square tube frame with pump and operating buttons and switches. Supply technology: - Steam generator (Jumag, 2009), heated with liquid gas - Compressed air system (Kaeser, 2008) - 2 x ice storage refrigeration system (Hafner-Muschler, 2009 and 2011) Additional title: 10 hl brewhouse with tank cellar and supply technology Cast wort capacity: 1000 l Cedpfx Asxbnw Dsbbohf Features: 2-roll grist mill, 5-vessel brewhouse (Apparatebau Nordhausen) with mash tun, lauter tun, wort kettle, whirlpool, hot water tank, wort aeration, wort cooling system, 7 x 25 hl CCTs, 6 x 10 hl storage tanks, 1 x 40 hl storage tank, 1 x 50 hl storage tank, 1 x 37 hl horizontal pressure tank, 1 x 3.5 hl yeast tank, mobile kieselguhr filter, mobile CIP system, steam generator, compressed air system, 1 x ice storage refrigeration system

Year of construction: 1997, condition: ready for operation (used), A complete brewhouse SSP Lichtenvoorde, purchased from the Paul Mueller Company, is available. Components: mash tun, lauter tun, whirlpool, working platform, CIP system, spent grain container, and wort pump. Brew length: 40hl, min. brew length: 25hl, min. part mash: 12hl, spent grain container volume: 2.5m³, brews: 2, pumps: 4, wort cooling pump type: E-Hygia-Bloctronic I/25b, CIP system tanks: 2, heat exchanger: Pfaduko VT20 , capacity: 26l, max. temperature: 100°C. The system is equipped with a brewhouse automation including Siemens OP37 and PROSYT control, but this is defective. If desired, the brewhouse can be purchased at an additional cost with newly installed control, automation accessories, and general overhaul. Documentation available. An on-site inspection is possible. Chsdpfsxfvh Sox Abbof

Condition: used, Year of construction: 2018, functionality: fully functional, heating capacity: 675 kW (917.74 HP), Complete biomass heating system based on wood pellets Chsdpev Uz Efjfx Abbsf Brand wood pellet boilers: KWB Type: Pelletfire Plus MF2S135 (135 kW) Number: 5 (cascade setup) Control: KWB control with online remote control Power range: 40 - 675 kW Year of construction: 2018 Thermal efficiency: 93% Filters: Yes, electrostatic filters are mounted in all flue ducts to collect fine dust Setup: 2 containers on top of each other The installation is complete and custom-made as a "stand-alone", so that the containers are on top of each other. The lower container contains the 5 biomass boilers with the control technology and the upper container contains the bulk stock for the wood pellets. A fuel compartment with a removal system and drop tube has been mounted per boiler. The installation is very well maintained and only certified wood pellets with the EN plus A1 quality mark have been used as fuel. The heating installation is currently stored in a preserved state. If you are seriously interested, the installation can be visited by appointment at the storage location near Rotterdam. Transport and commissioning in consultation. The steelwork that can be seen on the outside photo is not part of the installation. The biomass installation is suitable for, among other things: apartment complexes, apartment buildings with block heating, public swimming pools, large utility buildings, horticulture

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, BREWERIES & DISTILLERIES Sp. z o.o. has been providing professional consulting, design, and implementation of beer and distillate production lines for many years. We manufacture private label brands for our clients, as well as automated drink dispensing systems. Our competitive advantage is our highly qualified and experienced engineering team, which allows us to offer comprehensive turn-key project execution. To date in Poland, we have designed and commissioned 28 craft breweries and 3 craft distilleries, produced over 200 private label artisanal alcohol brands for our clients, as well as launched 30 DRINK WALL automatic drink dispensing systems in hotels and restaurants. We would like to offer you a used SALM brewpub brewery. SALM has been continuously manufacturing complete brewing systems since 1924. The brewery was produced in 2023 for a client in Bucharest and has only brewed 5 batches to date, making this installation practically brand new! The brewery is in perfect technical and visual condition. Below is the full technical specification of the offered brewery: Annual production capacity: 1,100 hl/beer Cjdpfjx Aky Dox Abbohf 1. Two-vessel brewhouse, 5.5 hl, stainless steel, A-frame design, including Salm Brewmatic 02 computerized control system - 1 unit. 2. Copper cladding on the cylindrical sections of the mash and lauter tuns. 3. Stainless steel brewery platforms - 2 units. 4. External kettle for wort heating, equipped with an atmospheric gas burner (natural gas or propane) - 1 unit. 5. Steam condenser for the brewhouse, mash tun, and lauter tun, stainless steel construction with built-in injection condenser and fan for odorless operation and DMS removal - 1 unit. 6. Two-roller malt mill - 1 unit. 7. Two-stage wort cooler - 1 unit. 8. Automatic mains water chiller, activates at water temperatures above 10°C - 1 unit. 9. Stainless steel whirlpool sedimentation vessel - 1 unit. 10. Mobile beer pump - 1 unit. 11. Wort aeration system - 1 unit. 12. Oil-free air compressor - 1 unit. 13. Glycol cooling system - 1 unit. 14. Stainless steel, double-walled, PU-insulated hot water tank - 1 unit. 15. Brewhouse access ladder - 1 unit. 16. UNI tanks, 11 hl, double-walled, 100mm PU-insulated, integrated cooling jacket, stainless steel 1.4301, 1.0 bar, built-in CIP - 6 units. 17. TÜV inspection, 6 UNI tanks with a nameplate on each unit. 18. Serving tanks for finished beer, 3.0 bar, 10 hl capacity, stainless steel 1.4301, PU foam insulated, water jacket, horizontal with frame - 4 units. 19. Electronic temperature control for each UNI and serving tank - 10 units. 20. Control cable with protective hose and threaded connector for each UNI and serving tank - 10 units. 21. Set of pipes and fittings for on-site piping installation - 1 set. 22. Set including 1 beer hose, 22m long with fittings, and mini-laboratory. The brewery has type approval from the Polish Central Office of Measures (Główny Urząd Miar) in Warsaw. Upon request, we can organize transport of the brewery from Bucharest to Poland and its installation on site. We are happy to send you more photos and a video presentation of the brewery by email.

Condition: excellent (used), Year of construction: 2020, operating hours: 13,800 h, functionality: fully functional, workpiece weight (max.): 5,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, total height: 2,740 mm, total length: 3,600 mm, total width: 3,900 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 595 mm, workpiece width (max.): 1,330 mm, workpiece length (max.): 990 mm, overall weight: 8,500 kg, For sale is a demonstration unit: Accutex AU860iA Max. workpiece size (L x W x H, mm): 1330 x 990 x 395 Max. workpiece weight (kg): 5,000 X/Y/Z travel (mm): 800 x 600 x 400 (optional Z600) U/V travel (mm): 150 x 150 Wire spool weight (kg): 16 Machine dimensions (W x D x H, mm): 3900 x 3600 x 2740 Machine weight (kg): 8,400 Water system capacity (l): Main tank: 2420 (Z400); Side + Main tank: 1630+1280 (Z600) Chsdpfxoxnx Its Abbef

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, stack height: 30 mm, paper weight (max.): 1,000 g/m², product length (min.): 500 mm, product width (max.): 350 mm, Equipment: CE marking, No reserve price - guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the equipment by 17/10/2025. As these are floor-level machines, extraction is straightforward. The offer includes one tb sprint B 312 VP and one tb sprint 304 QSM! Both machines were fully overhauled in 2023. --- tb sprint B 312 VP TECHNICAL DETAILS - Stations: 12 - Variable stack height: up to 30 cm - Formats: max. 35 x 50 cm, min. 6.5 x 10 cm - Paper weights: 18 to 1,000 g/m² - Throughput: up to 3,200 cycles/h MACHINE DETAILS - Electrical - Voltage: 3/N/PE 400V - Frequency: 50 Hz - EQUIPMENT - CE marking - Jogger bridge as a removable transfer to connecting machine - Manual feed station left - Lateral air blast - Individually adjustable single suction and blow nozzles - Controlled air separation and blast - Photocell sheet miss-feed detection per station - Electromechanical double-sheet detection at the delivery (motorized adjustment) - Overlapping shingle conveyor for transverse transport - Paper jam detection for transport table - Table illumination - Manual feed station right - Delivery jogger for standard or offset stack, selectable via switch - Total and pre-set counters - Digital speed display in cycles/h, infinitely adjustable --- tb sprint 304 QSM TECHNICAL DETAILS - Formats: max. 35 x 50 cm, min. 6.5 x 15.5 cm - Smallest booklet: 6.5 cm spine length x 6.5 cm - Throughput: up to 3,100 cycles/h (format and paper dependent) Stapling - Stitching heads: 2 slim heads for standard stapling up to 5 mm (Hohner Universal) - Fold-down boxes: complete with fold-down boxes and wire spools - Automatic stapling thickness adjustment - Block stapling: up to maximum format - Cross adjustment: of the staples relative to the fold Folding - Fold system: frictionless knife fold with automatic thickness adjustment and re-pressing for approx. 120 sheets of standard 80 g/m² paper Codpfsxb Dbxox Abbohf - Channel punch-out: single for block stapling Trimming - Front trim: upper and lower knives incl. air blast for trims to 6.5 cm and offcuts greater than 1.5 cm - Format adjustment: stepless for front trim - Head and foot trim: 3–20 mm each for approx. 80 sheets of standard 80 g/m² paper - Knives: upper and lower - Waste paper box: included - Continuous operation: same formats as 303 QSM Delivery - Shingle conveyor: shortened version with double-sided motorised feed and continuously adjustable shingle spacing - Delivery angle: format-adjustable for booklets and block stapling MACHINE DETAILS - Electrical - Voltage: 3/N/PE 400V - Frequency: 50 Hz - Machine Configuration - Version: Quick Set motorised (QSM) - Feed rollers: with upper belt transport system - Vacuum belt: included - Motorised format changeover: included - Fine adjustment: two handwheels (independent for head and foot) - Size readout: two digital counters, 0.1 mm increments - Motorised alignment: to collating machine

Year of construction: 2022, condition: new, BRAND NEW, 10 HL PSS completely full-automatic Brewhouse. This machine was purchased in 2022 but due to planning permission problems it was never installed. Therefore we are selling it for a good price. • A complete and fully automatic 3 vessel brewhouse. • Maischtun / Kettle net. 10 hl, total volume 21 hl, for 350 kg Malt (max 22 plato beers) heating by steam with agitator, with vapor condenser • Lautertun net. 15 hl, total volume 29 hl diameter 1600 mm, insulated with nobasil wool 75 mm. (wider for strong beers) • Whirlpool net. 10 hl, total volume 20,6 hl, Insulation with Nobasil wool 75 mm. • Maltmill Brewhouse inline configuration with stainless steel platform Utilities: • Hot water tank 24 hl, heating with steam • Cold water tank 14 hl • Electric Steam generator 150 kg/h Chsdpfx Aov R Ekdebbef • Compressor station • 5x Cylindric Conical fermenters for net. 10 hl at 3 bar with glycol cooling jacket and completely insulated. With dryhop port. • 4x Cylindric Conical fermenters for net. 20 hl at 3 bar with glycol cooling jacket and fully insulated. With dryhop port. • Dry hopping hopper • 3x lying down tapping tanks for net. 5 hl, for inliners, with glycol colling jacket and fully insulated. • 3x lying down tapping tanks for net. 10 hl, for inliners, with glycol colling jacket and fully insulated. • Control panel for fermenters and Tappingtanks • Mobile CIP unit with 2 vessels of 200 liter. 1 vessel with electric heating (2x 7,5 kW) complete with pump and valves • Mobile pump 2,2 kW • Semi-automatic Keg machine for 12 kegs a hour, complete with cleaning program for cleaning and sterilization with steam. All drawings, documentation, etc. available. Currently the whole brewery is stored as shown below in the vicinity of Nijmegen, Netherlands. For more detailed / technical information, please email Constant Keinemans, see below.

Condition: good (used), Hand wash basin with sink, wash basin -Stainless steel sink -Upper basin size: 390 x 285 x 120 mm -Lower basin size: 400 x 400 x 200 mm -Number: 6x pools available -Price: per piece Cjdpsb Uhm Rofx Abbohf -Dimensions: 700/500/H445 mm -Weight: 9.1 kg

Year of construction: 2022, condition: like new (used), functionality: fully functional, 5HL beer brewhouse + fermentation tanks + chiller Complete 5HL brewery set with brewhouse, 4 fermentation tanks, control cabinet and chiller. Ideal for a small brewery or brewpub to brew 500 liters of beer per batch. This set has everything you need to set up your brewery. Unfortunately we had to close down our brewpub and therefor are selling this new set. The selling price is excluding transport, installation and instructions, but we can help with this at an affordable price. This set contains: 500 liter (+25% headspace) mash/kettle tun with direct heating Baltur gas burner BTG-6 50-60HZ 500 liters (+25% headspace) stacked lauter tun and whirlpool tun Smoke exhaust pipes (double wall) Non-slip work platform Sanitary centrifugal pump Chodpfx Aevxufgobbjf Sanitary piping Valves and fittings Manual wort cooling station 10L glass wort grant Single stage 12m2 heat exchanger Pipe filter Wort aeration station 4x: 500L fermentation unitank (working volume 500L / total volume 700L) Chiller Quantor Chilly 35 LT Manufold Brewery instrumental control cabinet Spare parts

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Codpfx Aow Rm Sajbbohf Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Year of construction: 1999, condition: used, 3-device compact brewhouse for 20 hl output Additional title: 20 hl compact brewing system Brew size: 2000 l Length: 2600 mm Width: 5000 mm Height: 4500 mm Operation / Control: Manual control with heating programme controller ‘Barbie and Kühner 7600’ l Chodpfx Abjw U A T Iebsf Material: stainless steel / copper Base construction: Brewing vessels mounted on frame construction Features: Mash/wort kettle, lauter tun, pre-run vessel/whirlpool, spindle station, stainless steel control cabinet with control, stainless steel frame with operating platform, stairs, piping, pumps and fittings

Condition: good (used), Year of construction: 1998, Working area 500 x 350 x 250 (L x W x H), available with extensive accessories if required! Eroding wire 0,25mm - 10 pieces new spools available Filters and resin cartridges available Chjdpfx Asha U I Dobbef Please ask if you are interested !

Condition: new, Efficient and Safe Scrubbing with the Meijer SR750C The Meijer SR750C is a highly advanced scrubber-dryer that stands out for its impressive performance and ease of use. Equipped with two cylindrical scrubbing brushes (65 cm working width) and two front sweeping brushes, this machine easily sweeps and scrubs small debris from the floor. The sweeping brushes offer a working width of 100 cm, while the scrubbing brushes have a diameter of 18 x 62 cm. This makes the Meijer SR750C ideal for use in supermarkets, production areas, shopping centres, swimming pools, and showrooms. High Capacity and Maneuverability Thanks to its powerful 24V battery, the machine can operate continuously for up to 4 hours with an impressive productivity rate of 5,000 m² per hour. Its compact dimensions (159 x 88 x 124 cm) make this machine extremely maneuverable in confined spaces. The low step-in, ergonomic controls, and luxury operator seat ensure a comfortable working experience. The machine has a noise level of just 62 dB, making it extremely quiet during operation. Optimal Cleaning Results Featuring both clean and dirty water tanks of 110 litres each and an adjustable brush pressure of 30 to 40 kg, the Meijer SR750C delivers outstanding cleaning results, even on challenging surfaces. With a maximum speed of 8 km/h and front wheel drive, the machine operates quickly and efficiently, even on inclines up to 7%. Further Specifications: - Work rate: 5,000 m²/h - Battery run time: 4 hours - Scrubbing width: 65 cm - Squeegee width: 90 cm - Scrub brush type: cylindrical (2 pcs) - Scrub brush diameter: 18 x 62 cm - Clean water tank: 110 litres - Recovery (dirty) water tank: 110 litres - Sweeping brush working width: 100 cm - Sweeping brush diameter: 33 cm - Power source: 24V battery - Maximum speed: 8 km/h - Maximum gradient: 7% - Brush pressure: 30 – 40 kg - Traction: front wheel drive - Noise level: 62 dB(A) - Weight (excl. batteries): 436 kg Cjdpfxouqk Evo Abbshf - Weight (incl. batteries): 565 kg - Dimensions: 159 x 88 x 124 cm More Information or Demonstration? Would you like more information about the Meijer SR750C? Please feel free to contact us for further details or to arrange a demonstration. We are happy to assist you.

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 3220, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,300 mm, Mechanical general overhaul in 2025 Base machine – Travel paths X = 2,000 mm / Y = 1,300 mm / Z = 1,300 mm Machine column Torsion-resistant welded construction with three hardened compact roller guides, protected against chips and coolant. Spindle carriage Cast design with hydraulic weight compensation, guided on compact roller guides. Machine bed Self-supporting Hydropool composite structure, no foundation required. Precision compact roller guides on the X-axis. CNC rotary table (motorized) Ø1600 mm clamping area, 8 longitudinal T-slots (22 mm), 2 alignment slots, T-slot pitch 160 mm, centering bush Ø50 H7, runout 0.010 mm, flatness 0.020 mm. Indexing accuracy ±4”, max. rotation speed 5 rpm, tilting moment 60,000 Nm, maximum table load 6,000 kg, max. workpiece swing diameter 2,300 mm (up to 320 mm above table). Table top shows normal wear. Automatic tool changer Chain magazine for 48 tools, max. Ø 125 mm (250 mm if adjacent slots are free), max. length 400 mm, max. weight 25 kg. Tool interface SK50 DIN 69871, spindle position horizontal, fixed position coding and pneumatic spindle taper blow-out. Spindle head with universal milling head (UFK) Automatic 360 × 1° and 180 × 1° swivel, 64,800 programmable positions. Tool interface SK50. Hydromechanical quick tool clamping (pull force 20 kN). Main drive liquid-cooled, 30 kW at 100% duty cycle (41 kW at 40% duty cycle), speed range 36–6,000 rpm. Digital feed drives AC individual drives, infinitely variable 2–30,000 mm/min on all axes, acceleration up to 2 m/s². Operation / control Swiveling control panel with Heidenhain iTNC 530 CNC control. Measuring systems Direct, contactless linear measuring systems. Electrical equipment According to EN 60204 / VBG 4, 400/230 V, 50 Hz, total connected load approx. 50 kVA. Control cabinet IP54 with control and switching devices, wired via plug-in system. Lubrication Chjdpfx Asw N Nx Hebbjf Guides: centralized impulse lubrication. Main spindle: permanent grease lubrication. Paintwork Machine/control cabinet RAL 7035, milling head/spindle head RAL 5021, DD textured paint (silk gloss, oil/soda resistant). Work area enclosure 2 angular sliding doors at the front + roof, rear wall with protective cover, side viewing window. Power connection 400 V, 3-phase, 50 Hz, 50 kVA, 125 A slow-blow, compressed air 4–6 bar (incl. filter pressure regulator & condensate separator). Coolant system Switchable coolant supply (nozzle ring/internal for SK DIN 69871 AD). Compact paper band filter unit, adjustable flow through bypass valve. Pump capacity 32 l/min at max. 20 bar. Tank capacity 500 l. Chip conveyor Travel distance approx. 2,000 mm, feed width approx. 350 mm, discharge height approx. 1,250 mm. External electronic handwheel (HR 410) Switchable to 3 axes (optionally up to 5 axes, not for universal head axes). Collision monitoring Single-channel system for monitoring machine and, to a limited extent, tool collisions.

Condition: used, Year of construction: 2004, Used PET Blower Siapi 2004 type EASP 20 – Italy This is a complete blow molding machine which was not in use for the last 3 years. Blower speed: 2.500 bph for 2 L bottles The machine has 2 cavities, for neck sizes 28-38 mm. This Siapi Blower can be tested with a dry run. Weight: blower 5.000 kg, elevator 250 kg, positioner 250 kg All the necessary technical documentation for this machine is available. Chsdpfsvgutaex Abbof Required installed power: 120 kW Is available this compressor unit with additional offer: Compressor: Tempo Tehnika 350, 2004 Specs: 1100 rpm, 75 kW, 42 bar Dehumidifier: Bode du 37 type 309 – 2006 Compressed air tank: 1,000 L Compressor cooler: MTA rwd 150 – 2004 Machine cooler: Euri chiller gc – 2004 The compressor is included in this PET blow molding machine, or it can be bought separately. Is available this compressor unit with additional offer: Air transport cca 100m – Europool, Italy For bottles with a neck 28 and 38 mm. This blow molding machine complete with compressor and air conveyors is in excellent condition.

Condition: used, Year of construction: 2001, Overview  This Glass Bottle Bottling Line for Still and Sparkling Water was manufactured on average in 2001 by several European manufacturers, including TMG, Zecchetti, Bardi, Muvitec, Procomac, P.E. Labellers, and others. It is a complete and fully integrated line covering all major production steps such as depalletizing, washing, filling, capping, labeling, case packing, palletizing, and wrapping. The line was regularly maintained, includes newer components, and will be available from July 2025, as it is currently in operation. Technical data  Capacity: up to 12,000 bph Formats: 250 ml, 330 ml, 500 ml, 750 ml, 1000 ml Product: Still and sparkling natural mineral water Neck finish: S294 MCA - 1 Bottle diameters: 170 mm, 205 mm, 218 mm, 259–271 mm, 295 mm Case formats: 250 ml: 24-bottle carton 330 ml: 24-bottle carton 500 ml: 12-bottle carton / 20-bottle plastic 750 ml: 12-bottle carton 1000 ml: 12-bottle carton / 12-bottle plastic Year of Manufacture: various (1991–2016) Scope of Delivery  Depalletizer (TMG VEGA 50, 2001) Uncaser (Zecchetti DE Z 2T, 1993) Bottle washer (Bardi NILO 1 16R, 2001) Filler (Muvitec ECOFILL M24 6 12, 2001; Procomac PR 300232.01, 2001) Carbonator (Muvitec, 2001) Decapper (Grassle REM 20, 1991) Dry air line (Europool TF 03, 2013) Labeling machine (P.E. Labellers MASTER M/S 770/161/8S-SE, 2011) Case former (Siat HM 145, 2001) Case packer (Zacchetti IN Z 2T, 1993) Case sealer (Siat AVV SIAT HM 11-T-Muvitec, 2001) Sealant / hot melt unit (Preo EC5TRA2, 2001) Palletizing robot (ACMI ZX165U, 2002) Stretch wrapper (Robopac TECHNOPLANT 3000PVS, 2016) Silo caps (3 Master ALN600LT, 2001)   Csdpfjwhvc Rjx Abbehf

Year of construction: 2008, condition: used, 5-vessel-brewhouse with additional whirlpool with a knockout capacity of 250 hl at 12° Plato. The brewhouse consists of a mash kettle, a mash decoction kettle, a lauter tun, a prerun vessel and a wort kettle with internal boiler. Furthermore, a classic whirlpool with wort cooling and wort aeration is installed. The brehouse is fully automated with the electronic process control "brewmaxx V7" and on basis of the operation system Windows. The brewhouse is completely made in stainless steel, but installed beneath the old copper hoods. The prerun vessel is "Outdoor"-installation, the whirlpool is - like the other brewing vessels - installed in the brewhosue room beneath a copper hood. Csdpfx Ajw T St Uebbohf Additional title: Modern brewhouse made of stainless steel, copper-clad Cast wort capacity: 250 hl Operation / Control: Fully automatic with "brewmaxx V7" process control system Material: Stainless steel brewhouse with copper cladding Features: Mash tun kettle, mash kettle, kettle vapor condenser, lauter tun, spent grains bunker with spent grains conveyor, feed vessel, wort kettle with internal boiler, hop dispenser, spindle station, whirlpool, wort cooling, wort aeration, Various pumps, measurement and control technology, valves, control cabinets

Condition: good (used), Year of construction: 2000, Travels 1350 x 900 x 750 mm Machine. - Control Heidenhain TNC 426 Equipment tool changer 46-fold, milling spindle SK 40 12.000 rpm, incl. IKZ system and spool feeder Glass scales, 3D probe Renishaw MP12 Chodpoi El Iasfx Abbef Extensive accessories available if required! Please ask if you are interested !

Condition: used, Year of construction: 2014, Overview This complete brewing equipment is mainly from 2014 and is becoming available because the company is closed. The equipment is already dismantled and stored properly. Scope  Water Softener Compressor | Josval Sauber 240 D Mill | Robix ROPPI 250 Thermindus Boiler Ps(Barg 6) PL (Barg 10.4) Ts Max 165, Ts min 10, kW 34 Portable Pump 2.20kw INOX Hoses, cones, keys Manual Isobaric Bottling Machine 4 spouts Automatic Labeler | Arca L10-8128 2x Rotating Table with Regulator 100cm Diameter, for input and output of bottles or cans Videojet 1220 Batch Coder Infrico Undercounter Refrigerator with 3 Doors Brewhouse | Spadoni | MBS 600 VAP | 2014 Spadoni 600, Masher 680 Liters, Bottom Filter, Rotating Blades, Transfer and Recirculation Pump Boiler 720lt with Whirlpool, with Boiler Pump and Spadoni Plate Cooler Hot Water Tank | Spadoni | 10hl Cold Water Tank | Spadoni | 10hl Mixing Tanks | Spadoni | 1.5hl with Tangential Entries Mixing Tanks | 1.5hl with Tangential Entries 2x Isobaric Fermenters | Spadoni | 2.5 bar 15hl 2x Isobaric Fermenters | Spadoni | 2.5 bar 30hl 2x Atmospheric Fermenters 1bar Pressure 1.2hl | BREW TECH Atmospheric Fermenters 1bar Pressure 1.2hl, (Jacketed) | BREW TECH Chedetka Aqspfx Abbsf

Condition: used, Year of construction: 2012, Overview  This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Details Wort yield: 1,000 liters per brew Heating system: Steam Current status: Installed and ready for operation Availability: Immediately Scope of delivery  Brewhouse | Mini Brewery System | CI T 10 | 2012 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) Steam boiler | Mini Brewery System | - | 2012 (electric) Plate heat exchanger Hot water tank | 1,500 L Reverse osmosis system | ALFA | compact model | - Capacity: 150-200 L/h 4x Isobaric fermenter | Mini Brewery System | 1,000L | 2012 4x Horizontal isobaric maturation tank | DuoTank | 500 L | 2018 Cooling jacket & bag system for optimum beer preservation Chedpsv Da Dljfx Abbef

Condition: used, Year of construction: 1999, Overview The micro brewery was manufactured in 1999 by theGerman manufacturer BERAPLAN. All equipment is in good condition. A new wort copper was added in 2018.  List of equipment: 1. Mash Tun Made by Beraplan in 1999 Cylindric shape with conical ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1600 mm Height conical part: 20 0mm Volume: maximum 38 Hl Double sidewall Insulation Heated by steam, which can be regulated Hot and cold water inlet at the bottom Can be emptied through the bottom 4 CIP balls PT100 2 agitators Mach pump with variable speed drive 2. Lauter Tun Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1200 mm Volume: maximum 37 Hl Filtering ground with trapezoidal perforations High precision valve to regulate the flow rate Hot and cold water inlet at the bottom 4 CIP balls PT100 3. Wort Copper Made by FRACCHIOLLA in 2018 Heated by steam Cleanning balls Temperature sensor Transfer pump from Alfa Laval Solid C-2 (3 kW) 4. Whirlpool Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1250 mm Volume: maximum 40 Hl Double sidewall CIP balls Transfer pump from Alfa Laval Solid C-2 (2,2 kW) 5. Hot Water Tank Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 2700 mm Volume: maximum 85 Hl Double sidewall CIP balls Transfer pump from Alfa Laval Solid C-2 (7,5 kW) Heated by steam with temperature regulation 6. Heat Exchanger Made by MDC (France) Plate heat exchanger double zone model: RDC 307 Capacity: 30 Hl/h from 85°C to 16°C 7. Ice Water Unit Capacity: 1000 l New pump Cedpfx Abel Hxmdjbehf