Used Plate Bending for sale (16,531)

Condition: new, functionality: fully functional, power: 7.3 kW (9.93 HP), fuel type: diesel, color: yellow, overall weight: 396 kg, Year of construction: 2025, Equipment: UVV, Wacker Neuson Vibratory Plate Compactor DPU 5247 Heh NextGen - NEW! Item no.: 5100077277 Weight: 396 kg, Frequency: 69 Hz, Centrifugal force: 52 kN, 470 mm working width, Hatz diesel engine 1B50T-3 with 7.3 kW, electric start, operating hours counter, other sizes available! Bodsx Ak Uhopfx Abbjlr Machine location: Warehouse D-46514 Schermbeck. ----- Wacker Neuson DPU 5247 Heh for sale | NextGen Diesel Vibratory Plate | Vibratory plate, 470 mm working width | Vibratory plate, 52 kN | Wacker Neuson diesel plate with electric start | DPU 5247 Heh NextGen new | Reversible vibratory plate Wacker | Diesel vibratory plate with operating hours counter | Construction site vibratory plate, 396 kg | Professional compactor Wacker Typical applications: -Paving and road construction -Landscaping and horticulture -Pipeline and sewer construction -Sites requiring high maneuverability and performance -Rental fleets and construction companies

Condition: like new (used), Rothenberger Robend H&W & Plus Set (28681) 4 inserts for pipe diameters 12-15-18-22 mm in a sturdy metal case, as new Bjdpfexxacmex Abbjlr

Condition: good (used), Clamping plate with T slots, plate field, welding table, welding table, plate boring machine -Width: 945 mm -Length: 2990 mm -Height: 58 mm -Working height: 870 mm -Plate: with support ribs Bsdpfxsb S Taqj Abbolr -Groove width: 24 mm -Center distance between the T-slots: 180 mm -Dimensions: 3605/950/H870 mm -Weight: 2290 kg

Condition: used, Machine type : Motorized bending roll Manufacturer : Bradbury Control unit : MCE (industrial electrical control panel) Supply voltage : 380 V Phase : 3 Frequency : 50 Hz FLA (Full Load Amperage) : 17.6 A Main motor FLA : 15 A Disconnect short-circuit rating : 200,000 A Internal short-circuit rating : 65,000 A Bedpfxew Dd Iyj Abbjlr Electrical diagram no. : ED3033 Electrical serial no. : B014541 Machine Application The Bradbury bending roll is used for rolling and forming sheet metal into precise cylinders, cones, or arcs. It is employed in the production of ducts, tanks, tubes, or metal shells, and can be integrated into profiling or cutting lines. Features / Differences – Dedicated MCE control panel, with high-capacity electrical protection (200,000 A). – Main motor rated at 15 A, operating on standard industrial 3-phase power. – Full electrical documentation under reference ED3033 for operation and maintenance. – Compatible for integration within Bradbury automated coil processing lines.

Condition: new, The Hydraulic Tube Bender 1/2 is a compact and mobile Tube Bending Machine designed for bending steel tubes of larger diameters with a powerful manual hydraulic pump. This machine boasts a capacity of 10 tons and comes complete with dies for commonly used tube dimensions, allowing you to create bends of up to 90 degrees. With its robust 3-leg stand and 6 bending segments, it ensures stability and ease of use during operation. The included attachments cater to various diameters, making this versatile tool ideal for your tube and profile processing needs. You can efficiently bend tubes while enjoying the benefits of its portable design. If you require a reliable Tube Bending Machine, consider the Hydraulic Tube Bender 1/2 from KNUTH to enhance your workshop capabilities. Don't hesitate to request a quote today! Blsdouzlh Ijpfx Abbsr

Condition: repair required (used), functionality: not functional, Year of construction: 2004, CNC Tube Bending Machine Manufacturer: Schwarze-Robitec Model: CNC 80 E-MR Year of manufacture: 2004/2006 Condition: Needs repair CNC Control: PC-based Beckhoff CNC control Technical Data: - Maximum tube diameter x wall thickness: 60 mm x 3 mm - Minimum tube outside diameter: 16 mm - Minimum bending radius (to tube center): 25 mm - Maximum bending radius (to tube center): 240 + 50 mm - Maximum bending angle: 180° - Maximum tube feed length: 1000 mm - Bending direction: right - Machine weight: 7,000 kg - Total connected load: 39 kW - Voltage: 400 V / 50 Hz - Current: 100 A - Machine dimensions (L x W x H): 6.2 x 3.2 x 2 m Equipment / Accessories: - Hydraulic pressure and feed on slide rails Blsdpfx Abjxzubvebjr - Automatic tube turning and repositioning unit - Electric mandrel bending device - Pneumatic mandrel rod safety system - PC control Beckhoff - Automatic central block lubrication - Laser scanner, safety fencing Machine condition – repair needed: The planetary gearbox of the transport carriage is defective and must be replaced. Spare parts costs according to quotation: planetary gearbox €1,674 + gearbox flange €1,850 + pinion €850 + VAT – installation not included. Cheaper price – sale in as-is condition Immediate availability, including loading onto truck free of charge.

Condition: new, The scope of delivery includes: 25x new leveling plates Suitable for manufacturer: Mecalux Material color: Sendzimir galvanized For frame profile: P 101 Material thickness: 1.00 mm Total width: 155 mm Total depth: 110 mm Hole diameter: 15 mm Number of holes: 2 Weight | Unit: 0.130 kg Bodpfowa Npzox Abbslr Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: good (used), functionality: fully functional, machine/vehicle number: 804, roller length: 2,550 mm, working width: 2,500 mm, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, overall weight: 12,500 kg, 3-roll hydraulic plate bending machine 2500 x 16 mm Manufacturer: KUMLA Type: PV 7 H Serial no.: 804, overhauled in 1987 The machine is of a very robust design and has only been used in single-shift operation. Bsdpfx Absvxbm Rjbslr Max. bending length: 2500 mm Max. sheet thickness: 16 mm Cone bending device Top roll diameter: 324 mm Bottom roll diameter: 305 mm Hydraulic roll adjustment Dimensions: L x W x H = 5000 x 1600 x H 1900 mm Working height: 1000 mm Additionally, a staircase platform around the machine can be purchased.

Condition: excellent (used), Mounting plate, scribing plate, measuring plate, measuring table, straightening plate, scribing plate, test plate, inspection plate, precision measuring table -Clamping surface: 3000 x 2000 mm Bjdpfx Abow Dzk Esbolr -Quantity: 3 mounting plates available Price: per piece -Note: The mounting plates can be screwed together end-to-end, as the end faces are milled. -Possible clamping surfaces: 3x 3000 x 2000 mm (1x 9000 x 2000 mm) (1x 6000 x 3000 mm) -Sheet thickness: 60 mm -Plate: with supporting ribs -Dimensions each: 3000/2000/H360 mm -Weight: 4500 kg/unit

Year of construction: 2020, condition: new, Machine plate for VDF lathes HEIDENREICH&HARBECK HAMBURG VDF BOEHRINGER GÖPPINGEN VDF Price per piece: €100 net, negotiable Blsdpexxy Dkefx Abbor

Condition: new, The KRM ST 20/6, a robust Plate Rolling Machine from KNUTH, is designed for exceptional performance in the category of 3-Roll Motor Plate Rollers. This heavy-duty machine is capable of bending workpieces up to 3000 mm in length, making it ideal for a variety of applications in metalworking, including steel and metal construction. With features like a solid, closed machine frame, a motorized rear roller, and an asymmetrical roll arrangement, the KRM ST 20/6 can handle even the heaviest plates with precision. The crowned and hardened rollers are suitable for processing stainless steel, while the machine boasts a motorized drive powered by a 4 kW electric motor. Control is simplified with a foot switch, and the emergency stop safety rope ensures safe operation. You can trust the central lubrication system for reliable maintenance and operation. For those looking for quality Plate Rolling Machines, the KRM ST 20/6 stands out as a solid investment. Request a quote today to enhance your sheet metal processing capabilities with this exceptional 3-Roll Motor Plate Roller. Bsdpfx Asqagtiobbelr

Condition: good (used), Year of construction: 1998, GEOTECHNIKA XZ 1000/1 3-roll round bending machine Bledsq Ix Anepfx Abbsr 1000mm year 1998 weight 200kg

Condition: new, The scope of delivery includes: 01x shim, new Manufacturer: Stow Material color: sendzimir galvanized Total width: approx. 120 mm Bodpfx Abotdb T Eobelr Total depth: approx. 140 mm Material thickness: 1 mm Weight: approx. 0.125 kg | pc. Currently available in stock: approx. 2,500 pcs. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, functionality: fully functional, Year of construction: 2024, TRtech ORGM-3004 Reducer Guillotine Shear 1 EUR 30.500,00 Cutting Length: 3100 mm Cutting Capacity for 450 N/mm² (MS): 4 mm NC Back Gauge Range : 750 mm Cutting line lightning & shadow illumination Raer safety covers with photocell Squaring arm with T slot, stoper and ruler Cutting unit counter Front sheet holding arms: 3 pcs Finger protection cages Table with ball transfer Cutting gap adjustment Motor Power : 7,5 kW Height : 1380 mm Width : 2300 mm Bedpfx Abovdz Rtjbjlr Length : 3700 mm Cutting Angle : 1° 30' Weight Approx. : 4000 kg Options Return to sender & Rear pneumatic sheet support system 1 EUR 3.300,00 EUR 3.300,00 Payment conditions: BY SWIFT: %40 pre-payment in advance, rest before loading TOTAL EUR 33.800,00 Delivery time: EX-Works OSM Makina, 8 weeks after the reception of order SEAL AND SIGNATURE Delivery time: EX-Works OSM Makina, 8 weeks after the reception of order

Condition: excellent (used), Face plate and clamping disk (2858) Diameter 440 mm Camlock mounting 133.4 Cone diameter 106.39 Bodpetup Trjfx Abbjlr Height of face plate 50 mm Weight 28 kg

Condition: excellent (used), Hydraulic Guillotine Shear (used) Manufacturer: VOLZ Euro-Cut Model: 6.5 x 3050 Year of manufacture: 2002 Max. cutting length: 3050 mm Max. plate thickness (ST 45): 6.5 mm Distance between side frames: 3050 mm Motorized back gauge adjustment: 20 – 1000 mm Cutting angle adjustment: hydraulic Hold-down clamps: 18 pieces Motor power: 11 kW Bljdpfx Abjx Ag Scobor Machine weight: approx. 5100 kg Required space: Width 3830 mm, Depth 2865 mm, Height 1700 mm Foot switch Angle stop Front support arms Motorized back gauge adjustment Cutting edge illumination The machine is in very well-maintained condition and is immediately ready for operation. Forklift available, free loading onto truck Low-cost shipping available Machine location: 59510 Lippetal

Condition: new, The KRM ST 30/5, a robust Plate Rolling Machine from KNUTH, is designed for exceptional performance in the category of 3-Roll Motor Plate Rollers. This heavy-duty machine is capable of bending workpieces up to 3000 mm in length, making it ideal for a variety of applications in metalworking, steel, and metal construction. With features like a solid, closed machine frame, a motorized rear roller, and hardened rollers, it provides reliable and precise results. The asymmetrical roll arrangement accommodates heavy plates, and its conical bending capabilities are enhanced by an adjustable rear roller. Moreover, it includes a user-friendly separate control panel with a foot switch for easy operation. Maintenance is simplified through central lubrication, ensuring long-lasting functionality. You can take advantage of the KRM ST 30/5 for your plate rolling needs; request a quote now and enhance your sheet metal processing capabilities. Bsdpfx Ajihvtgsbbolr

Condition: used, Year of construction: 1994, sheet width 3050 mm plate thickness 16 mm distance between columns 3050 mm 15-1000 mm Bsdpfexz Hg Dex Abbslr cutting angle adjustment ja ° cutting gap adjustment ja mm connected load 30 kW weight of the machine ca. 14,.5 t dimensions of the machine ca. 4,0 x 260 x 2,55 m Hydraulic guillotine shear with - ELGO control for backgauge - Cutting angle adjustment - Cutting length adjustment - Cutting length limitation (time dependent) - Sheet thickness adjustment - Back gauge with clearance function - Cutting line lighting - Side stop - 3 pcs. support consoles - good condition

Condition: good (used), The scope of delivery includes: 01x printing plate, used Material color: blue Dimensions: approx. 200 x 95 mm Material thickness: approx. 5 mm Bsdpfx Aot N T A Ujbbslr Number of drill holes: 02 pcs. Drill hole Ø: approx. 15 mm Weight per piece: 0.750 kg Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: new, CNC Hydraulic guillotine shear New machine Manufacturer:UMS Type : PRO. 3100 x 13 CNC Technical data: Cutting length 3100 mm Bjdenl D Tfjpfx Abbolr sheet thickness (42 kgf/mm) 13 mm sheet thickness (70 kgf/mm) 8 mm cutting angle: 0,5 - 3 mm 15 pcs. blank holder Cybelec Cybtouch 8 monoblock: steel welded construction Automatic cutting gap adjustment Table with ball rollers High quality, hardened and ground upper and lower knives Light sensor for front side (sheet guide) Adjustable cutting stroke 1 m support arm with scale 1 m support arms ( 2 pieces ) Rear light sensor ( 10-16 mm sensor distance) Cutting line illumination Motor 30 kW throat 180 mm Cutting speed 7/13 Original Rexroth valves Rexroth hydraulic system Rexroth pump, original Eckerle Electrical parts from Siemens Operating instructions German Table height 900 mm Overall dimensions 3840x2830x2180 (WxLxH) Total weight 11.000 kg plus commissioning, training and transport Delivery time from order approx. 70 days

Condition: not inspected (used), Bluhm Systeme marking lasers Here we offer you a Bluhm Systeme marking laser. Bluhm Systeme marking laser fiber laser e-SolarMark FL Without function guarantee (untested) Introduction: The e-SolarMark FL10W and 30 W are class IV lasers in accordance with the lEC 825 and EN 60825 (standards for end-user applications). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a protection class product in accordance with the above-mentioned directives. The e-SolarMark is a laser system for marking and engraving plastics, metals and foils while stationary or in motion. Technical specifications e-SolarMark description The e-SolarMark system consists of two main components: 1. the marking unit with laser head (scanning head) with focusing lens. 2. the control unit contains the power supply unit, electronic control system and firmware for the system function, I/O slots inside. The e-SolarMark includes a fixed galvo scanning head equipped with a lens for a square marking field with standard dimensions of 70 X 70 mm Laser specification in standard version Laser Type---Fiber Laser Laser output power---FL2 model: 19W; typical Wavelength---1062 nm typical Internal Modulation---20 to 80 kHz Scanner Head Description: Scan Head---Two galvanometric mirror scanners with hard, highly reflective dielectric coating. F-Theta Lens types and their characteristics: Lens marking field 70x70 mm to 300 x 300 mm Focus distance B 192 mm Working environment Conditions: Relative humidity up to 80% non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length marking/control unit 3 m Bedpfxoq Rtz He Abbslr Weight marking unit 5 kg Weight of control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption FL2 model 450W Type: e-SolarMark FL Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Amada Hydraulic Guillotine Shear Type GX II 630 Working width: 3050 mm Max. sheet thickness: 6.35 mm Robust CNC electro-hydraulic guillotine shear AMADA CNC touch control, located front left ("GP 37W2") Machine control system including information display Main display with 4 operating panels Control/operation of all machine functions Up to 50 cutting programs, each with up to 15 sequences Bjdsxwmycopfx Abbslr CNC electromechanical backgauge Travel speed: 100 mm/sec CNC electro-hydraulic cutting angle adjustment CNC electro-hydraulic blade gap adjustment Sight device & cutting line illumination for viewing the scribe line Shearing according to optical scribe mark Manually adjustable table support plates including ball rollers Grip recesses in the front support table 2x movable foot switches Operating manual and circuit diagrams included

Condition: excellent (used), Technical data for the locking bracket: Manufacturer: SSI Schäfer Included in delivery: 01x locking angle, used Material color: sendzimir galvanized leg ,,A" approx. 35 mm leg ,,B" approx. 53 mm (contact surface see description) incl. distance block (grey) inner dimension ,,C" approx. 22 mm material thickness: approx. 2,00 mm Weight / pcs.: approx. 0,120 kg Remark: Due to the included the Z-bracket can be used for various truss widths crosshead widths from 40 - 60 mm! Brief overview / range of application: - Without block for truss width 60 mm (e.g. for INP) - With block (small side inside) for truss width: 50 mm (INP or box profile) - With block (large side inside) for crosshead width: 40 mm (INP or box profile) General information about the article: Bedpfx Ajpgndgobbslr This item is offered for pickup only. A desired transport or shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, Haco hydraulic guillotine shear type TS 406 working width 4050 mm maximum sheet thickness 6 mm Bodpfx Aboxwmv Djbolr motorised back gauge cutting gap adjustment cutting angle adjustment

Condition: new, The scope of delivery includes: 01x shim, new Manufacturer: Stow Material color: sendzimir galvanized Total width: approx. 120 mm Total depth: approx. 140 mm Material thickness: 3 mm Weight: approx. 0.38 kg | pc. Currently available in stock: approx. 2,610 pcs. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: Bledpfxotda Sdo Abber This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.