Used Plasma Cutter Plasma Cutter for sale (3,235)

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input current: 50 A, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2017 Control system: IMSNC Oxy-fuel cutting table: 3000 x 1500 mm Extraction duct left / right Fsdpfjy Nd Hysx Aivjgh Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Power source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process control with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short circuit time during torch ignition, and power source • Operating status and error display via LED and screen • Analog and serial interfaces for adaptation to CNC controllers • Infinitely adjustable cutting current from 10 - 160 A and during marking from 5 - 25 A • Optimal piercing through infinitely variable delay time for the main arc and adjustable current rise • Adjustable current reduction for cornering, start, and end signals of the guidance system • Automatic display of the preset cutting current • Serial data transmission for PC-based diagnostics Plasma cutting technology: Contour Cut • Further development of HiFocus technology for mild steel • Optimized for cutting fine internal and external contours • High cutting quality and contour accuracy • Holes with angular deviations according to DIN EN ISO 9013 range 2-4 • Minimal angular deviations and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No tedious post-processing – high productivity and low costs • No additional equipment, software, or new consumables required • Standard equipment Plasma torch PerCut 200/210 • PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting • Quick-change PerCut 210 torch with threaded lock for quick and convenient tool swapping • Special torches available for special applications • Higher cutting speeds reduce cost per meter • Long service life of consumables conserves resources • Narrower kerf means fewer emissions and less waste • Significantly lower gas consumption compared to competitors thanks to efficient liquid cooling up to the nozzle tip • Lower noise levels due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Power source HiFocus 161i Power supply: 400 V; 3 Ph; 50 Hz Max. power input: 28 kVA (100% duty cycle) Main fuse, slow-blow: 50 A Protection class: IP22 Open circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: Max. 50 mm Recommended: 0.5 – 38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma machine torch PerCut 200 Quick-change torch PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, Air, N2/H2 (F5)

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, grinding wheel diameter: 200 mm, workpiece length (max.): 200 mm, TECHNICAL DETAILS Grinding wheel diameter: 100–200 mm Maximum workpiece length: 200 mm MACHINE DETAILS Control: Siemens 840D or equivalent Fjdpeya Dy Hefx Aivogh CNC axes: 3–5 axes Drive power: 5–10 kW Coolant tank: 100–200 litres EQUIPMENT Coolant filtration system Universal applicability for different tool types and geometries High flexibility through CNC programming and adaptable clamping devices Process reliability thanks to integrated cooling and filtration system Easy maintenance due to modular design and central supply units

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Technical Data Grinding/Workpiece Diameter: up to approx. 300 mm (partially up to 350 mm) Grinding Length/Stroke: approx. 550 mm (slide travel) Module range (for hobbing cutter resharpening): min. module approx. 0.5 to max. module approx. 25 Number of flutes: typically 1–99 pieces (depending on tool set) Grinding wheel diameter: approx. 150–300 mm Grinding wheel speed: up to about 2,700 rpm Centre distance (workpiece spindle): typical range 400–800 mm Fodpfjxtiunox Aivjgh Swivel/Pitch range: e.g. grinding wheel head swivel 0–15° Machine weight and space requirement: approx. 4.2–4.9 t weight; space approx. 3 × 2.6 × 2.3 m Electrical data: operating voltage e.g. 380 V three-phase, control 24 V, auxiliary voltage 220 V

Year of construction: 2021, condition: used, Manufacturer : IMMEQUIP Engineering Model : CEMH-LAM360 Year : 2021 Fgodpfxjy Dvpvj Aivsh Type : Cutter / Laminator Structure & design: All-stainless steel 304L mechanically welded frame Fitted with 4 pivoting wheels with brakes Dimensions Longueur totale : 3550 mm Hauteur tapis entrée : 1025 mm (±15 mm réglable) Hauteur tapis sortie : 737 mm Largeur bandes : 360 mm Conveyor: Inlet conveyor - White silicone NEOBELTING belt - Maximum temperature: 90°C continuous - Speed: 17 m/min - Motor: 0.25 kW – three-phase 400V - Product guidance via stainless steel comb Conveyor system: Exit conveyor - White silicone NEOBELTING belt - Speed: 43 m/min - Motor: 0.37 kW – three-phase 400V - Integrated air blow-off ramp Cutting unit - Cutting wheel Ø350 mm - 3 blade holders (45° and 90°) - 3 ground hardened steel blades (Z30C13 – 40/42 HRC) – additional blades can be fitted - Rotational speed: 72 rpm - Motor: 0.37 kW – three-phase 400V - Stainless steel housing with adjustable pressure roller - Stainless steel roller guide - Cutting kit available: 90° and 45° Product orientation kit: 2 symmetrical sets, each comprising 1 cell, 1 stop flap and 1 pneumatic cylinder Rolling function - Non-motorised hollow stainless steel roller, Ø140 x 350 mm - Gap adjustment: manual - Adjustable anti-clogging scraper Power supply: Three-phase 400V – 50 Hz Danfoss VLT frequency converters Operator display (HMI) Full machine control Buzzer + power-on indicator light Emergency stop buttons (including 1 on the cutting unit side) Electrical documentation available

Condition: used, diameter . mm Number of knives . Fjdpoyqvihjfx Aivogh tool adaptor . The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: like new (used), KRAMER + GREBE 200 L Industrial Cutter – Stainless Steel KRAMER + GREBE 200-liter industrial cutter, designed for cutting, chopping, mixing, and emulsifying food products in professional production processes. Manufactured by KRAMER + GREBE, a specialized manufacturer of machinery for the meat industry, this cutter features a 200-liter bowl and a high-speed rotary blade system that allows for processing the product to achieve different degrees of chopping, mixing, and homogenization. Its robust stainless-steel construction and industrial capacity make it a particularly suitable piece of equipment for meat processing plants and food product manufacturing. Fgedpfex S Ih Tjx Aiveh MAIN FEATURES -Manufacturer: KRAMER + GREBE -Type: Industrial cutter / bowl cutter -Bowl capacity: 200 liters -Cutting system using rotary blades -Circular processing bowl -Cutting, chopping, and mixing operations -Suitable for homogenization and emulsification -Construction primarily in stainless steel -Protective cover for the processing area -Integrated control panel -Robust construction for industrial use -Designed for batch processing -Hygienic design for the food industry -Easy access for cleaning and maintenance APPLICATION The KRAMER + GREBE 200 L is designed to perform intensive size reduction, mixing, and homogenization operations through the combined action of the rotating bowl and the blade system. The product circulates repeatedly through the cutting area, allowing for different degrees of processing to be achieved depending on the raw material, processing time, and selected parameters. It can be used for operations such as: Cutting and chopping Mixing Homogenization Emulsification Preparation of meat mixtures Preparation of fillings Mixing of ingredients Preparation of formulated products APPLICATIONS Particularly suitable for meat industries, sausage manufacturers, producers of ready meals, pet food, and other food industries that require a robust cutter for batch production. Depending on its configuration, it can be used to produce sausages, pâtés, meat emulsions, fillings, ready meals, and other food formulations. The combination of KRAMER + GREBE, a 200-liter bowl, and industrial construction in stainless steel provides a versatile solution for professional cutting, mixing, and emulsification processes. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: good (used), Laska KU 45 VKAB bowl cutter with cooking and vacuum options. Has come from a pilot plant in a major food company so has not been used very much. Complete contents of pilot plant also available. Fgsdjx Ilqdopfx Aivoh

Condition: used, Year of construction: 2004, Cloth cutter Fgodpfjxy Rfbjx Aivoh Kolbus: KS Year: 2004 Description: -Unwinder -Circular knives: 10 -Rewind for waste material: 1 -Delivery table Material width: max. 1.400 mm.

Condition: good (used), End mill, roller cutter, milling cutter, disc cutter, slot cutter Fjdpfx Asy D Ndyjivsgh -Cylinder end mill: Disc cutter 99.6 kg net, carbide-tipped -Type: various versions -Price/Fee: complete -Transport dimensions: 790/600/H210 mm -Weight: 99.6 kg

Condition: used, Year of construction: 1980, weight 1 t keins Dimensions (L/W/H) 1200 x 800 x 1450 mm module 1 Fgedpfxjyg Rats Aiveh

Condition: used, Year of construction: 2006, operating hours: 100 h, functionality: fully functional, Profi Industrial Cutting System (Longitudinal/Cross) – Grossmann – ONLY 100 operating hours! Description: Fgjdpfjylxmfex Aivsh For sale is a high-precision, automated longitudinal and cross-cutting machine from quality manufacturer Grossmann Maschinenbau. The system has a total runtime of no more than 100 operating hours. It is therefore in an almost mint technical condition and shows hardly any signs of wear on the mechanical components. Originally designed for cutting chip mats, this machine’s robust construction and versatile PLC control make it suitable for a wide range of materials (e.g. rubber, cork, fleece, composites, films, textiles, etc.). Technical highlights & features: Condition: Nearly new (max. 100 operating hours). Format: Maximum cut length 2,500 mm x maximum working width 1,200 mm. Complete line: Includes professional unwinder and winder for fully automatic material flow from roll to roll or roll to format. PLC control: Professionally programmed, with a choice between manual and automatic operation. Material handling: Automatic gripper feed positions material precisely in the end position, with integrated edge removal system for perfectly clean edges. Operation: Intuitive control via display, foot switch, and optical/acoustic production completion indicators (traffic light/horn). Precision: Integrated laser for exact material alignment. Safety: Fully enclosed design and modern safety monitoring. Versatility: This machine is a true all-rounder for any rolled material that needs to be cut to precise sheet sizes or strips. Its stable construction with a high-quality aluminum profile system ensures maximum rigidity. Complete documentation available, including process protocol, wiring diagrams, and technical drawings. The machine can be inspected and tested under power by appointment. For exact technical details and questions about fields of application, please feel free to contact me personally. Contact: Phone: 05427 9423 20

Condition: used, Cutter head, milling adapter, carbide milling cutter, indexable insert milling cutter, face milling head, milling head -Manufacturer: Widax-Heinlein diameter 173 mm -Type: M400 Ø160 R 12 607 Fgedpfx Aieg T I Nzevoh -Number of teeth: 12 -Adjustment: SK50 -Dimensions: Ø 173/260 mm -Weight: 12 kg

Year of construction: 2026, condition: new, SoloBaker's superb NEW BCS 201 vertical cake and pie slicer. Universal automatic knife slicer with a rotary table designed for slicing all kinds of cakes and pies. The solid construction, precise drive system, automatic cleaning, blades heating and adjustable cutting head speed give almost unlimited possibilities to adapt the device to the selected product. In combination with the affordable price and small dimensions, the slicer is a good and economical solution for small and large patisserie enterprises. Dimensions 130 x 110 x H 148cm. Power consumption 1,2 kw. Voltage: Single phase 230V 50Hz with voltage stabilizer. Required air connection 0.6-0.8 MPa and a flow rate of 200-300 l/min (depending on the cutting speed). Vertical automatic cake and pie slicer (cutting machine) with a rotary table designed for fast slicing of all types of cakes and pies without compromising their attractive appearance and structure into square and triangular portions. With the help of a PLC, the touchscreen allows easy setting of the parameters of the cut part (s) and the built-in microprocessor allows to store up to 20 cutting programs in memory. The cover of the machine is made of stainless steel. The 9L air tank is built into the machine at the front part. The double blades of the knives are made of food grade stainless steel and have a precise drive system and an automatic system for cleaning and heating the blades and an adjustable cutting speed allow the machine to cut various cakes and pies to an effective height 80 mm. Most important functions: - The double blade knife, vibrating in the opposite direction, makes cutting cakes smooth and clean. - Anti-slip rotary table (40x60cm) with a rectangular tray can be easily replaced by 2 round trays (diameter each 30 cm). - Slicing 2 round cakes at the same time. - Locking wheels make it easier to transport the machine to the desired location. - Induction system for heating the knife up to a temperature of 100°C ensures an even cut of hard glaze, chocolate and other similar surfaces. - High degree of accuracy of cutting parameters is achieved by means of two servomotors, which ensure precise operation of knives and table rotation. - Cake pieces are obtained with the same weight, shape and volume, which eliminates the need for additional control. Fjdpfx Aehabdpoivsgh - The speed of lowering and lifting the knife is set according to the characteristics of a particular product - this will allow you to achieve maximum productivity. - Electronic air pressure control ensures smooth and accurate machine operation. - High quality automatic knife cleaning system maintains the perfect appearance of the cut product and eliminates the need to wipe it by hand before each cutting. The cleaning system includes mechanical removal of product residues by a return slider (bar) and a stream of air into a special collection tank. - Residue collection containers eliminate the need for frequent cleaning of the machine and the surrounding work area.. - The machine makes up to 40 cuts per minute. - PLC & touchscreen Siemens. - Built-in voltage stabilizer for stable operation of the electronics and servomotors. CUTTING RANGE: Round cake/pie with a diameter of 15-30 cm - cut into triangles into 2/4/6/8/10/12/14 equal parts. Rectangular cake/pie up to 60 cm x 40 cm - cut into rectangular or triangular shapes. 1 Year Warranty

Condition: excellent (used), Year of construction: 1995, Tool grinding machine Michael Deckel S5 in very good condition Technical data: >> year of construction 03/1995 >> grinding wheel diameter max.100mm >> spindle speed 5600 1/min >> power consumption 1,5KW >> weight 450KG Accessories: >> Swiveling dividing head SK40 >> div. mountings SK40 To the machine : Fgsdjpr U Etjpfx Aivjh Offered is a tool grinding machine of the brand Michael Deckel S5. The machine is suitable for grinding high precision parts. The Deckel S5 is in a very good condition. Mechanically and electrically tested. Take the opportunity to inspect and try this machine on site under power.

Year of construction: 2023, condition: new, Motor cutter, motor stator recycling machine Power:4KW/380V Applicable scope: Recycling copper winding of stator within Φ8cm - Φ25cm. Speed: 8-30p/h Dimensions( L*W*H)：180cm*90cm*195cm Fgjdemcbpcjpfx Aivjh Weight: 1450Kg

Condition: excellent (used), Year of construction: 1992, Universal tool grinder Michael Deckel S11 very good condition !!! Technical data: >> Year of manufacture 1992 Fgsdpfxjm E T Ano Aiveh >> serial no. 1651 Clamping range : >> Clamping area of the tool slide 500 x 180mm >> Max. tool diameter between centers 130mm >> Max. Max. tool diameter with flying clamping in universal dividing head 620mm >> Max. Tool length between centers 270mm >> T-slots machine stand 12mm >> T-slots grinding head, tool slide and accessories 8mm Range of motion: >> Working paths grinding stroke 190mm grinding stroke during swirl grinding 190mm cross adjustment tool slide 100mm vertical adjustment grinding head 325mm longitudinal adjustment grinding spindle 5mm >> Coarse adjustment travel tool carrier 220mm Grinding head carrier 800mm Universal dividing head on tool slide 330mm >> Swivel angle Grinding head carrier 360 degrees Grinding head 360 degrees Tool carrier 360 degrees grinding spindle: Three-phase drive motor 1.1KW at 2800 rpm Spindle speed, stepless 2000 to 10000 rpm Max. Grinding wheel diameter 125mm Max. Cutting disc diameter 200mm Djduu2 Dimensions: Weight 520 Kg Dimensions ( depth x width x height ) 800 x 1100 x 1760mm Space requirement ( including operation ) 2,5 x 2,3 m Accessories and equipment: >> Opto-electronic measuring device with microscope and digital display >> Radius grinding device SK40 >> Handwheel device for tool slide >> Suction device >> Machine lamp To the machine : Offered is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches are ground amazingly fast, economical and flexible and with the highest ease of use. The Deckel S11 is in very good condition. Mechanically and electrically tested. Take the opportunity to inspect and try out this machine on site under power.

Condition: good (used), Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, bacon cutter, gate, cutting gate -Manufacturer: Holac, cutting blade for meat cutter multi-purpose cutter dicer -Type: various versions, see photos Fsdpfx Aiowzhfqevogh .: 6x 2334850 / 3x 2334830 / 1x 2335190 thickness 1.6 / 1 / 2.7 mm -Price/Delivery: complete -Transport dimensions: 375/111/H20 mm -Weight: 1.6 kg

Condition: good (used), Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, bacon cutter, gate, cutting gate -Manufacturer: Holac, cutting blade for meat cutter multi-purpose cutter dicer -Type: 3 cutting blades, see photos -Hole: Ø 30 mm -Dimensions: 430/310/100 mm Fgjdpfewzhhxex Aivoh -Weight: 22.9 kg

Condition: used, Haffner SL100 Door Lock Mortising Machine Used, function tested Technical Data: - Includes 16 mm chain set - Includes guide bar 9 - 11 mm x 150 mm - Includes guide bar 12 - 17 mm x 150 mm - Includes guide bar 12 - 17 mm x 175 mm - Includes chain lubrication device - Includes 2 manual workpiece clamps - Chain mortising motor: 1.7 kW / 2800 rpm - Faceplate milling motor: 0.6 kW / 25000 rpm - Drilling motor: 0.4 kW / 2800 rpm - Milling length / slot length, chain: 20 - 450 mm - Milling length, faceplate cutter: 315 mm - Max. drilling hole spacing: 365 mm - Milling depth / slot depth, chain: 150 mm - Max. faceplate cutter depth: 35 mm - Depth for handle and keyhole drilling: 65 mm - Milling width / slot width, chain: 6-40 mm Fodpfx Aiowzkgkovjgh - Max. faceplate cutter Ø: 35 mm - Max. handle and keyhole drill Ø: 40 mm - Clamping capacity - Door thickness: 80 mm - Max. door width: 1050 mm - Min. door width: 550 mm - Max. door width with spacer: 1250 mm - Min. door width with spacer: 750 mm - Weight: 165 kg

Condition: repair required (used), Bean end trimmers for sale, as shown in the pictures, price per unit Fjdpfx Aswz Ntpeivogh

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: Aventa PLUS 4 x 2, type of input current: DC, working range: 40,002,000 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 25 mm, cutting current: 300 A, Equipment: documentation/manual, Macchina in operazione Fgedpfxew Al Rmo Aivsh

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: RX7_800074, total height: 1,905 mm, total length: 2,010 mm, total width: 2,508 mm, workpiece weight (max.): 20 kg, spindle speed (max.): 10,000 rpm, grinding wheel diameter: 202 mm, overall weight: 4,500 kg, power: 19 kW (25.83 HP), 5-axis CNC tool grinding machine – completely overhauled (X, Y, and Z axes, CNC). High-performance production machine with a polymer concrete bed (ANCAcrete), 19kW, 10,000/min spindle, and a dual disc changer for up to eight grinding wheels. PLX tool loader with 2 pallets, latest CNC generation, and the latest ToolRoom RN35 software installed. Optionally available with an extraction system and coolant system. Fgodpfsw Uf Sgox Aivjh !Offer only valid in Europe, Africa, and the Middle East!

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 140014, travel distance X-axis: 760 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 8,000 rpm, spindle mount: MK 4, table length: 1,270 mm, table width: 305 mm, total height: 2,390 mm, total length: 2,170 mm, total width: 2,510 mm, overall weight: 2,500 kg, workpiece weight (max.): 200 kg, controller model: Siemens 828 D, Equipment: documentation/manual, rotational speed infinitely variable, For sale is a CNC milling machine, model V 760 L by MMD. The machine has been in single-shift operation since 2014 and shows normal signs of use. However, it is fully functional and continues to work precisely and reliably. Technical specifications: Control: Siemens 828 D Automatic tool changer Fsdpfx Ajxnnb Nsivsgh 3D probe included Automatic tool measurement The machine is powered on and can be inspected under operation at any time. Condition: Used, well-maintained, technically flawless. Regularly serviced, immediately ready for use. Year of manufacture: 2014 Operation: Single-shift operation Inspection and test run possible by appointment.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 605, rotational speed (max.): 3,000 rpm, grinding diameter: 12 mm, controller model: Robot CNC, workpiece height (max.): 100 mm, table diameter: 200 mm, TECHNICAL DETAILS Grinding capacity (diameter): Ø 0.025 – 12.7 mm Bar diameter: Ø 1.0 – 12.7 mm Grinding length: W15 (optionally W20) Number of wheels: 1 Table diameter: 200 mm Workpiece height: 100 mm Control system: Robot CNC Axes: 4 axes + 2 programmable robot axes Z-axis: 35 mm, resolution: 0.5 µm X-axis: 25 mm, resolution: 0.1 µm Y-axis: 286 mm, resolution: 0.5 µm U-axis: 15 mm, resolution: 0.1 µm Interpolation: Simultaneous linear interpolation of 4 axes, cylindrical interpolation of 2 robot axes Head Motor Power: 0.70 kW Speed: 300 – 3,000 rpm Rough Grinding Power: 1.5 kW Spindle diameter: Ø 60 mm Grinding wheel diameter: Ø 200 mm Cutting speed: 30 m/s Finishing Power: 0.75 kW Spindle diameter: Ø 100 mm Grinding wheel diameter: Ø 150 mm Cutting speed: adjustable MACHINE DETAILS Total power requirement: 6 kW Machine weight: approx. 1.8 t Space requirements (L x W x H): approx. 1.83 x 2.04 x 2.1 m EQUIPMENT - Robot for loading and unloading Fgodpfxjxnzd De Aivoh - Fire protection system

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 01.642/F-1446, The machine is designed to cut an 800mm batch into an endless strip for Extruderfeeding Fjdpeuz Twqjfx Aivogh Description attached!