Used Pipe Notcher for sale (2,431)

Condition: new, A dedicated machine for producing a straight trench / notch in a variety of timber products used in general joinery, garden furniture, shed, roof truss and timber frame manufacturing. Also can be used for door framing, notching of roof bearers and for log cabin manufacture.As standard the machine is fitted with horizontal pneumatic workpiece clamps and also a hydrocheck damper control to give a smooth stroke action to the cutterhead movement. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand. 3kw motor. Pedpfx Aedy Hm Djmpjgk Max tool dia 250mm Bore of tool 40mm. Handwheel rise and fall of cutter motor arm. Max depth of trench / notch 60mm. Width of trench / notch 60mm - in one pass. Max. length of travel of tool 250mm. 2 x horizontal workpiece clamps. Hydrocheck damper to movement of cross cut arm. Dust extraction outlet 100mm. Machine stand

Year of construction: 2020, operating hours: 245 h, condition: good (used), functionality: fully functional, machine/vehicle number: QX20200111A551, Used - Pre insulated pipe decoiler. The decoiler could be used for other pipe types. Pipe coiler parameters: Installed power: 5.5 KW Voltage: 220V Current frequency: 50 Hz Compressed air: 6 Bar Pgsdpfx Amst Eatxopok Total weight: 1700 kg Coil dimensions: Coil ID: 1600, 1700, 1800, 1900, 2000, 2100, 2200, 2300, 2400mm Coil OD: up to 3100mm Coil width: up to 1100mm Please call for more information

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: AR200 tube and profile roll, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Delsy, controller model: MG Touch Pro 15", pipe diameter (max.): 273 mm, tube wall thickness (max.): 20 mm, bending angle (max.): 200 °, number of axes: 9, working height: 2,200 mm, overall weight: 27,000 kg, total length: 2,850 mm, total width: 2,950 mm, total height: 2,930 mm, power: 29.42 kW (40.00 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 240 bar, number of digital displays: 6, Equipment: documentation/manual, emergency stop, Profile bending machine model AR200 brand MG srl year 2016 Capacity chart of the machine in enclosed. Model AR200 Pipe bending roll NR. 2 set of rollers for pipe bending SIZE 159MM - SIZE 139,7 MM Configuration -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic with gear unit each shaft -side arms left/right side hydraulic move in 3 direction keeping aligned the profile being formed. Pgodpfx Amjyx A Uuopek -Control panel console NC programmable with automatic rolling, touch screen 15” , display the 9 axis of the machine with readout for manual use and fully programmable automatic forming -Electric power supply 3phase 400/50 Vac -40HP -Service manuals and operation books original. Additional set of rollers and tooling available for bending section HEB - IPE -UNP - ANGLE – T -SECTION- TUBULAR- IRON BAR ON EDGE - see capacity chart in enclosed ..

Condition: as good as new (ex-display), Year of construction: 2025, Max Ø 114mm; Straight and bent round tubes; One grinding station; Grinding of straight and bent round tubes up to Ø114mm with maximum flexibility. The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval and elliptical tubes. The ML planetary belt system allows belt grinding without rotating the tube to deliver the best results. The feed system safely feeds the straight tubes into the grinding station for a consistent and productive surface finish. ML100 Working capacity (Ø mm) 3 - 114 No. of stations 1 Sanding belt, dimensions (mm) (2x) 50x940 Sanding belt speed (m/s) 3-22 Psdpfotzkgbsx Ampogk Feed speed (m/s) 1-5 Sanding belts Motor (kW) 3 Wheel, motor (kW) 1.5 Feed motor (kW) (2x) 0.12 Total power (kW) 5 Power consumption (A) 11 Dust extraction connection (Ø mm) 80 Dimensions (mm) 750x1000x1300 Weight (kg) 250

Condition: excellent (used), Year of construction: 2019, operating hours: 9,365 h, functionality: fully functional, Saw for cutting steel pipes and profiles Year of manufacture: 2019 9365 hrs Input material length: 6000-7000 mm Cutting diameter: 12-100 mm Output lengths: 50-2000 mm. Pjdsy A Rpbjpfx Ampjgk

Condition: excellent (used), Year of construction: 2015, operating hours: 26,407 h, functionality: fully functional, We offer for sale a fully automatic circular saw BLM Group ADIGE EM80, suitable for precision cutting of tubes and profiles in series production. The machine is equipped with Siemens Sinumerik CNC control and an automatic material feeder, enabling efficient and repeatable manufacturing. Technical data: Psdpfxjy A Nyxo Ampegk Year of manufacture: 2015 Control: Siemens Sinumerik Power supply: 38 kW Voltage: 380 V / 50 Hz Weight: approx. 8,500 kg Operating hours: approx. 26,400 h Cutting range: tubes Ø 10–80 mm Max. part length: 600 mm Ideal for serial production of short parts Equipment: Automatic feeding system Full machine enclosure Multiple tool positions Set of clamping jaws (see photo) High-speed, high-performance saw suitable for series production, offering high productivity and cutting accuracy. Test operation possible by appointment.

Condition: used, Semi-automatic tube bending machine, mandrel tube bender MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Serial No. Year of construction for simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Tube diameter max. 12 mm Mandrel length approx. 65 mm Rated power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Power supply 400 Volt, 50 Hz Podpjpu R Nvsfx Ampegk - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display - Machine without bending tools and without tool storage pins 25 x 183 mm - Only 1 bending mandrel available (see pictures). Required space (L x W x H) 1000 x 1000 x 1500 mm Weight 390 kg Good condition

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 900 mm, total length: 2,020 mm, total height: 1,000 mm, sheet thickness steel (max.): 1 mm, Sheet thickness 0.35 - 1.2 mm, production dimensions 125 mm - 1250 mm, motor power 2x 1.5 kW, working speed 24/10 rpm, cold-worked steel and galvanized steel, production of elbows with diameter 200-1000 mm and straight pipes with diameter 200-1000 mm, guide rails and spare rollers included. Prices excluding VAT. Pgedpfjymcvtex Ampsk

Condition: good (used), WEBER tube extrusion line including: Psdpfxevryhys Ampjgk WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Battenfeld V125

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, KUAG PIPE-HAUL-OFF 110/3 CATERPILLAR Year of construction: 2006 Caterpillars: 3 with synchronous drive Diameter: Min 25mm Max 110mm Take-off speed: 0.2 - 15 m/min Pedpfx Aoyq Sdhempogk Condition: Very good operational Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany

Condition: used, Used item Features and technical data: - with manual changeover lever, painted, stable Psdpjyq T Izefx Ampsgk - Connection diameter: 350 mm Dimensions: approx. 1240 x 900 x 450 mm Availability: short-term Storage location: 63934 Röllbach

Condition: ready for operation (used), Pipe Bender, Tube Bending Machine, Profile Bending Machine, SHS/RHS Bender, Used Machine Manufacturer: Schwarze-Wirtz Model: Perfect H135 Dimensions: 6115 x 2870 x 1300 mm Pgsdpfx Aswhmv Ujmpsk Bending Capacity: Round tube: Ø 130 mm, bending radius: 500 mm Square tube: 30 mm, radius: 380 mm 45 mm, radius: 500 mm 50 mm, radius: 500 mm 70 mm, radius: 500 mm 90 mm, radius: 500 mm Bending Angle: up to 180° Electrical Specifications: 380 V

Condition: used, Brush deburring machine, tube deburring machine BAUER type BE 1 Machine No. 29 Year of manufacture 1992 Brush diameter 250 mm Brush width 25 - 55 mm Speed 1500 / 3000 rpm Power 2.2 / 3 kW Mains connection 380 Volt, 50 Hz Pgsdpfx Aehrkrpjmpok - Material support table Required space (L x W x H) 500 x 450 x 440 mm Weight 45 kg good condition

Year of construction: 2004, condition: used, functionality: limited functionality, Machine for automatic pressing of tube-plate evaporators. Pjdpfx Asyt Sqgompjgk

Year of construction: 2004, condition: used, functionality: fully functional, Machine for cutting and 2D bending of aluminium tubes with a wall thickness of 7 and 8 mm. Pjdpfx Amjyt Sp Nepegk

Condition: new, 95 mm Shaft diameter 30 mm Shaft revolutions 7 U/min roll diameter 132 mm Drive 0,75 kW weight 220 kg range L-W-H 530x900x660 mm Pgedpfxjyv N A He Ampsk Equipment / Accessories: - Two driven rollers with grooved surface - Manual feed of the upper roller - working position horizontal and vertical (with tilting base) - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used e.g. Flat iron, T-iron, solid material etc.

Condition: new, I-beam section - flat steel 80x20 (d1200) mm I-beam section - upend 80x25 (d2100) mm L-beam 50x50x6 (d1000) mm bar material - diameter 40 (d800) mm square material 60x60x3 (d4000) mm rectangle 80x30x3 (d6000) mm tube diameter max. 70x2 (d1600) mm tool adaptor 60 mm roll diameter 177 mm bending speed 6,4 m/min total power requirement 4 kW machine weight ab. 970 kg Overall size 1400x950x1450 mm Domestic equipments: - hydr. roller drive - Planetary gearbox delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard roller set, hardened - lateral straightening rollers Pgjdpfx Amsyv Nwqepok - mobile control panel - 3 driven rollers - Digital display - Machine horizontal u. vertically usable - CE mark / Declaration of Conformity - Operating instructions in German

Condition: new, I-beam section - upend 100 x 20 (d 2100) mm tube diameter max. 100 x 3 (d 3000) mm L-beam 80 x 80 x 8 (d 2000) mm square material 50 x 25 x 2 (d 600) mm bar material - diameter 60,0 (d 1000) mm I-beam section - flat steel 120 x 30 (d 600) max. 140 mm tool taper 80,0 turning speeds 4,2 U/min weight 1600 kg dimensions 1240 x 1375 x 1540 mm Domestic equipments: - Welded steel structure (St-52) - Rollers are driven by 3 separate hydraulic motors - Stepless speed - Special steel gears - Shafts are made of special steel, hardened and ground - Manual lubrication - Guide rollers are hydraulically adjustable - Lower rollers are hydraulically movable up and down - Infinitely adjustable speed of the lower rollers, move after below and above - Digital display for lower rollers - Separate and movable control panel - Horizontal and vertical operation - Production quality certified according to CE, ISO 9001 - 2015, TSEK and TURQUM Pgodpsyv Nniefx Ampok Additional equipment: - hydraulically adjustable straightening rollers

Condition: new, round material 40 mm tube diameter 70x2 mm square material 80x30x3 mm L-beam 50 x 5 mm roll diameter 157 mm I-beam section - upend 50 x 15 mm I - beam section - flat steel 80 x 16 mm Shaft diameter 50 mm bending speed 2,95 m/min total power requirement 1,1 kW weight of the machine ca. 500 kg dimensions of the machine ca. 1000x950x1450 mm Domestic equipments: - Special steel shafts (42CrMo4) hardened and ground - a set of standard rollers - lower rollers up and down hydraulically deliverable - digital display for lower rollers - separate control panel - in one direction manually adjustable lateral straightening rollers - manual lubrication Psdpfxoyv Nk Rs Ampegk - horizontal and vertical operation - CE mark / Declaration of Conformity - Operating instructions in German

Condition: new, R10-R260 210 ° bending speed 2 U/min 1 1/4" x 3,5 mm einphasig - 230 V drive motor 1,1 kW < 70 dB weight of the machine ca. 80 kg dimensions of the machine ca. 410 x 1000 x 570 mm Accessories / equipment: Hard copper and aluminum: 54x2 mm Steel tube: 42x3 mm Stainless steel: 42x2.5 mm Solid material: 30 mm Number of programs: 30 each 9 bends Control: Soft-touch control panel in 8 different languages Mobile by driving device The controller allows easy programming of the automatic cycle The controller is equipped with a system diagnostics and has a great language selection. Pjdpfjyv I Tksx Ampjgk Patented fast tool change system A single bending speed

Condition: used, Hydraulic Profile Bending Machine, Pipe Bending Machine LANG Type Ondomat 60 Serial No. 2589 Year of manufacture: 1970 Bending capacity max.: Ø 60 x 2 mm Pressing force: 20 tons Counterforce: 7.5 tons Maximum bending angle: 135° Tool stroke: 250 mm Maximum tool width: 125 mm External width of tool rocker: 90 mm Motor power: 18 kW Psdpfjyi Hrwjx Ampjgk Power supply: 380 Volt, 50 Hz - Hydraulic bending process with counterpressure cylinder for wrinkle-free bending - Up to 10 different bending angles in sequence via automatic indexing turret - Two-hand control panel - 1 set of bending dies Ø 30 mm, die width rocker = 78 mm, die width counterholder = 50 mm Required space (L x W x H): 2000 x 750 x 1500 mm Weight: approx. 2 tons Good condition

Condition: new, Year of construction: 2025, - Capacity 16-76 mm - With 10 rollers - Angle adjustment Pgsdpfx Asphqgzsmpjk - Documentation - 400V

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Pgodpfehwrhmox Ampok Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need fior additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: excellent (used), For sale: Professional tube deburring machine TUBOGRAT, manufactured by the German company Tracto Technik Spezialmaschinen. The device is designed for processing tube ends and removing internal and external burrs. Ideal for workshops, production, and installation purposes. Robust construction ensures long and trouble-free operation. Technical data Manufacturer: Tracto Technik Spezialmaschinen KG Model: TUBOGRAT TG 138 Diameter range: 6 to 42 mm Rotational speed: 180 rpm Pjdpfxeyvgp Ts Ampsgk Direction of rotation: left Power supply: 380 V Phases: 3 Frequency: 50 Hz Power: 0.12 kW Current: 0.4 A Condition Device in good technical condition Visible signs of use Machine is operational

Condition: new, Tubend TT 90 pipe grinding machine Tube grinding machine Incl. 10 pieces. Grinding rollers: Pgodpjt Sumaofx Ampek 16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 49.5 - 57.5 - 73.5 mm Incl. 6 sanding belts Belt width 100 mm Belt length 1250 mm Pipe diameter 16.5 - 90 mm Angle adjustable from - to 0 - 65 degrees Supply voltage 400 V Total power requirement 2.2 kW Machine weight approx. 0.18 t Space requirement approx. 1.2 x 0.6 x 1.3 m Pipe clamping range 90 mm Documentation (English)