Used Pet Food Granulator for sale (9,050)

Condition: used, Granulator / Granulators Redpfx Ajxb Adlja Uep Manufacturer: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with a replaceable third bed knife (deflector) for processing thick-walled materials. Inlet hopper suitable for conveyor belt feeding. Rotor mounted outside of the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: rotor and stator knives are positioned opposite each other and cut in a scissor-like manner. With base frame including vibration dampers. Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: used, Cutting mill / cutting mills Redpfexgq Ucjx Aa Uep Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Condition: used, Infeed: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor knives: 3 stator knives: 2 Rjdpoxgtmujfx Aa Ujp Drive: 7,5 kW Double diagonal cut With roller feeder, electric control unit and sound insulation box

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size Rodexgtthepfx Aa Ujp

Year of construction: 2012, condition: ready for operation (used), Rotor diameter: 450mm, cutting chamber opening X/Y: 900mm/540mm, rotor blades: 3 x 32, stator blades: stationary, drive power: 37kW, throughput: 900kg/h, machine dimensions X/Y/Z: approx. 1600mm/1700mm/1500mm. Documentation available. Rodpoucw S Sefx Aa Usp

Condition: ready for operation (used), A complete UPG system for polyester resin granulate production is available. 1) High-speed Henschel fluid mixer FM 350C, speed: 1500 rpm, heating unit: Lauda. 2) Raw material supply system with 6 bunkers, screws and vibrating chutes. 3) Conveying system with a collecting tank located 9m above the mixer and a Demag 4t rope hoist. 4) Schenk fluidized bed cooler. 5) Engelsmann ED 250/4 flat bed screen. 6) Alpine B40/63 RO granulator. 7) 2 annular gap compactors Siemens. 8) 2 Kessler & Luch blowers, volume flow: 7000m³/h. 9) Aerobic filter, filter capacity: 4000m³/h. Documentation available. On-site inspection is possible. Rsdpfx Aaowk Nk Te Uop

Year of construction: 2008, condition: ready for operation (used), A Strautmann plastic briquetting press is available. Pressing force: 300kN, hopper type: TS 1600, system dimensions X/Y/Z: approx. 6750mm/1900mm/2750mm. Documentation available. An on-site inspection is possible. Rsdpfxex El Ahe Aa Uop

Year of construction: 2016, condition: ready for operation (used), A total of five (5) compact Helios granulate dryers with integrated conveying and control are available. Year of manufacture: 4x2016/1x2019, drying hopper volume: 30l, suction lance length: 810mm, drying capacity: approx. 6kg/h, max. drying temperature: 185°C. Machine dimensions X/Y/Z: approx. 420mm/420mm/625mm, weight: approx. 80kg, control: WINneo basic. Including conveying unit with dedusting and dust collection container with filter. Documentation available. An on site inspection is possible. Rsdoydp Abspfx Aa Uep

Year of construction: 2004, condition: good (used), 1x Rapid GK2218 ( 1987) 1x Rapid 1521A ( 1996) 1x Rapid GK205A ( 1989 ) Rjdpfxjitvbpo Aa Ujp 2x Rapid 1521A ( 2004)

Condition: used, Grinding bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory finishing round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies, drying granules, desiccant Rjdpfx Aaerxw E Es Uop -Manufacturer: Walther Trowal, drying granulate type GM -Grain: see photos -Price/tax: complete -Transport dimensions: 1200/800/H600 mm -Total weight: 72 kg

Condition: good (used), Granule dryer, granule drying system, granule conveyor, vacuum conveyor -Manufacturer: simar, granulate conveyor vacuum conveyor with 2 hoppers -Type: F2582 -Item no.: 10-02082 Rsdpfx Aasp A A Rrs Usp -Housing: material VA -Individual components/dimensions: see photos / technical. drawing -Total dimensions: 870/710/H1430 mm -Weight: 80 kg

Condition: used, Granule dryer, granule drying system, granule conveyor, vacuum conveyor -Manufacturer: Digicolor, granule conveyor vacuum conveyor -Type: unfortunately without type designation -Housing: material VA -Individual components/dimensions: see photos / technical. drawing -Total dimensions: 930/870/H2880 mm Redpfx Aopz Sgfja Uop -Transport dimensions: 930/870/H2280 mm -Weight: 141 kg

Year of construction: 1999, condition: good (used), Granule dryers, compressed air dryers, continuous dryers, granule drying systems -Manufacturer: digicolor, Granule dryer type Dehumidifying Dryer -Model: DT 204 M Rodpfx Aelb Iv Nea Uep -Power: 10000 W -Side channel blower: Siemens Elmo-G 1.5 kW -Individual components: see photos -Dimensions: 1020/610/H1550 mm -Weight: 241 kg

Condition: good (used), Granule dryer, granulate drying plant, granulate conveyor, vacuum conveyor -Manufacturer: Digicolor, granulate conveyor vacuum conveyor -Type: unfortunately without type designation -Housing: Material VA -Individual components/dimensions: see photos -Dimensions total: 260/250/H830 mm Rsdpfx Aaowuppkj Usp -Weight: 13.6 kg

Condition: used, machine/vehicle number: M304, Krones PET Block 54/8 Monobloc Filler–Capper – Overview The Krones PET Block 54/8 is a second‑hand monobloc composed of a rotary isobaric filler and rotary screw capper for PET bottles. Engineered for beverage production and industrial packaging, this unit is ideal for integrating into a used bottling line requiring counter‑pressure filling and PCO 1881 closure application. With 54 fixed filling valves and an 8‑head capper, it delivers reliable performance on large PET formats with precise neck handling. Technical Specifications & Performance Data Configuration: Monobloc Filler–Capper (filler + capper; no rinser module) Filling technology: Isobaric, fixed-valve counter‑pressure Number of filling valves: 54 Valve pitch (center distance): 126 mm Capper: 8-head rotary screw capper for plastic closures Neck finish: PCO 1881 (short finish) – plastic screw caps Bottle materials: PET Rjdpfx Asyhcgboa Ujp Nominal capacities: 1.5 L = 9,000–10,000 bph; 3.0 L = 7,000–8,000 bph Machine rotation: Clockwise Overall dimensions: L 3.8 m, W 3.2 m, H 2.65 m Approx. weight: 7,500 kg Reference: M302 Module Details Filler carousel: 54 valves, designed for carbonated beverages and counter‑pressure operation; suitable for still beverages with inerting depending on product setup. Capper turret: 8 capping heads optimized for PCO 1881 plastic screw caps; consistent application torque and bottle neck handling for PET containers. Advanced Automation & Control Systems PLC platform: Siemens S7 for process control, diagnostics and integration. Signal and I/O: Provision for standard digital signals to synchronize with upstream/downstream equipment on a used bottling line. Process control: Counter‑pressure phases managed via PLC for stable fill levels and CO₂ retention. Production Line Integration Capabilities Line compatibility: Ideal for beverage production environments seeking to upgrade or expand a second hand industrial packaging line. Upstream equipment: Can interface with external bottle rinsers or blow molding machines (not included). Downstream equipment: Compatible with conveyors, labellers, packers and palletizers. Handling system: PET neck handling for stable transfer between filler and capper. Machine Condition & Maintenance History Status: In storage; filler dismantled and stored. Operating readiness: Operating after scheduled service/maintenance. Power: Not connected. Operating hours: Not set. Typical availability: Unit can be prepared for dispatch after service with a standard lead time. Operational Performance & Versatility Process benefits: Isobaric fixed-valve design supports low-foam filling, minimized oxygen pickup and consistent fill volumes on large PET formats. Format range: Optimized for 1.5 L and 3.0 L bottles; additional formats possible subject to parts and changeover kits. Closure system: Reliable application of PCO 1881 screw caps for CSD, sparkling water and other carbonated beverages. Installation Requirements & Site Preparation Footprint: 3.8 × 3.2 m; recommended service clearance aroun...

Condition: used, Year of construction: 2020, machine/vehicle number: M305, Used Rotary Filler–Capper Monoblock 24/8 for PET and HDPE Bottles – Overview This second-hand rotary monoblock combines a 24-head volumetric piston filler with an 8-head pick-and-place spindle capper, engineered for PET and HDPE bottles up to 1 L. Designed for industrial packaging environments, it is a robust component for a used bottling line handling non-pressurized products such as detergents and liquid soap. The machine features a painted iron frame, stainless steel panels, and a fully enclosed protective hood with safety devices, offering reliable performance in high-throughput operations. CE marking and complete documentation support integration within beverage production and home & personal care lines where non-isobaric, non-aseptic filling is required. Technical Specifications & Performance Data Configuration: Rotary filler–capper monoblock (24/8) Container materials: PET, HDPE Product types: Liquid detergents, liquid soap (suitable for non-carbonated, non-aseptic applications) Filling technology: Volumetric piston filling No. of filling valves: 24 Nozzle type: Mobile nozzles Max fill volume: up to 1 L Capper: 8-head pick-and-place pneumatic spindle capper Cap type: Plastic screw caps (one cap size currently tooled) Machine rotation: Clockwise Nominal speed: up to 5,000 bottles/hour (depending on product, bottle, and closure) Isobaric: No (non-pressurized filling) Aseptic: No Integrated rinser: Not included Filling Section Bottle infeed screw Central product tank with magnetic float switches 24 pneumatic cylinders, upper plates, lower plates Internal plates with stainless-steel/Viton sealing Opening/closing valves per station Capping Section 8 pneumatic capping heads with spindle screwing system Pick-and-place cap transfer Vibratory cap bowl (one cap size) Cap cup and cap chute (one cap size) Rodpfx Asyhb R Ssa Usp Automatic cap elevator Mechanical & Structural Frame: Painted iron External panels: Stainless steel Protective hood: Enclosed with doors and safety devices Advanced Automation & Control Systems Pneumatic control panel for filler and capper actuation Electrical panel with CE-compliant components Wiring diagram included for streamlined commissioning Magnetic level control in product tank for stable filling Production Line Integration Capabilities This monoblock integrates seamlessly into second-hand used bottling line configurations for industrial packaging and beverage production of still, non-pressurized liquids. Its clockwise carousel rotation, bottle infeed screw, and cap-handling system allow straightforward connection with upstream conveyors, depalletizers, blow molding machines, and downstream labellers, inspection systems, and secondary packaging. Upstream compatibility: Blow molding machine, bottle unscrambler/depalletizer, conveyors Downstream compatibility: Labeller, inspection/quality control, packer/shrink-wrapper, palletizer Changeover scope: Supplied with 1 bottle format and 1 cap format; additional formats can be engineered on request Machine Condition &...

Condition: used, Year of construction: 2000, machine/vehicle number: LC348, Used Filling Line For Edible Oil In PET 1L Bottles Capacity: 6.000 bph x 1,0 L Blow Molding Machine KOSME KSB 3000 – 2001. – 2 pcs x 3.900 bph Box for preforms with transport to the blower Compressor for cooling moulds MTA S.R.L. – 2000 KOSME bottle air conveyor – 1999 AISI 304 stainless steel Electrical control cabinet with PLC Built-in air filters It transports bottles from blower to filler Filling Monoblock Filler and capper – ICS-Slovenia – 1995 – 6.000 L/h Labelling Machine Labeller ICS – 1995 – paper labels, cold glue Conveyor belts ICS – 1995 Packer in transport boxes 3×5 bottles – ICS – 1995 Shrink Wrapper Shrink wrapper SMIPACK-packer in foil 2×5 bottles – 2013 Pallet Wrapper Rsdpfx Aaoyhbzdj Usp Pallet wrapper ZLATOROG-Slovenia – 1999 Compressor KAESER low and high pressure compressors – 2000 Refrigeration dryer There are spare parts worth It has complete technical documentation Required space for equipment: 600 m2 Required installed power (equipment, compressors, refrigerators): 495 kW The Used Filling Line For Edible Oil In PET can be seen in full production function until December 15, 2022

Condition: new, machine/vehicle number: 1602-2-2, mileage: 5 km, power: 96 kW (130.52 HP), fuel type: diesel, empty load weight: 2,750 kg, maximum load weight: 750 kg, overall weight: 3,500 kg, wheelbase: 3,445 mm, fuel: diesel, CO₂ emissions: 196 g/km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, loading space length: 3,500 mm, loading space width: 2,250 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, traction control, Citroen Jumper Euro6 3500Kg new vehicle EU new car Rodpfx Ajf D Eg Tsa Ujp Mileage 5 km Fuel Diesel kW/hp 96/131 Manual gearbox 6 gear ccm 1.997 cm³ Particle filter, air conditioning, daytime running lights, reversing camera, ESP, ABS, on-board computer, heated mirrors, electric front windows, central locking with remote control, emission class (NFZ): Euro 6, COC papers. Sales body made of GRP Superlight in sandwich construction with alcove, unused and with a large sales hatch across the entire width of the vehicle on the right, 2/3 seater, driving license class B, rear running board, LED lights, reversing camera, non-slip industrial floor R11. Various low-frame chassis available (Fiat, Citroen, Opel). Box body interior dimensions WDH 3500 x 2250 x 2300 mm Side flap 3270 x 1480 mm Permissible total mass 3,500 kg Unladen weight 2,750 kg Paint finish on request Interior fittings Left-hand side: 1 work surface with stainless steel worktop, sliding doors and intermediate shelf, approx. 3500 x 600 x 850 mm 1 double washbasin approx. 600 x 600 x 850 mm WxDxH incl. fresh and waste water tank, boiler and pressure system, soap and paper dispenser. 12V automatic battery charger for the starter battery. 4 wall shelves in white with aluminum edge profile, 2x left 1250 mm and 2x right 1250 mm. Right-hand side: 1 refrigerated counter in 800 mm depth with compressor, storage compartment with extra doors at the bottom, foam insulated housing, display surface in stainless steel, aluminum work surface and front glass, temperature from +1°C to 7°C, approx. 3500 x 800 x 1100 mm WxDxH. Further equipment: Shelf above the sales flap, folding bag shelf at the sales opening. 2 LED panels on the ceiling, 3 dimmable LED spotlights above the sales counter and LED counter lighting. Standard electrical installation 380 volt/16A switchable to 230 volt/16A, 2x feed socket according to CEE standard, RCD circuit breaker, 16 ampere fuse with acceptance, 5 double sockets, hygiene package. Subject to errors and prior sale!

Condition: used, Year of construction: 2010, operating hours: 47,000 h, machine/vehicle number: LC582, Used Complete Krones CSD PET Bottling Line – 22,000 BPH – Overview This second hand, ultra-clean Krones CSD PET bottling line is a complete, high-efficiency solution for beverage production and industrial packaging across carbonated soft drinks, cider, sparkling water, still water and CO2-mixed juices. Built by Krones and GEA in 2010 and kept in production with OEM service, the line delivers up to 22,000 bottles per hour (0.5 L) and 18,000 bph (1.5 L), combining a Contiform S12M blow molder directly coupled to an ultra-clean isobaric filler-capper bloc. It is a market-ready used bottling line designed for reliability, hygiene, and quick format changeovers in PET. Technical Specifications & Performance Data Manufacturer: Krones and GEA Year of manufacture: 2010 Working hours: approx. 47,000 Nominal capacity: 22,000 bph (0.5 L) | 18,000 bph (1.5 L) Products handled: carbonated soft drinks, cider, sparkling water, still water, juices with CO2 Filling technology: Ultra-clean, isobaric, volumetric PET filling Current product: Apple juice with water and CO2 Neck finishes: PCO 1810, PSO 28 mm, 1810/1881 short neck Rsdpfx Aajyhbmto Ujp Controls: Siemens Simatic S7 PLC platform Main Equipment Scope CIP: Krones VarioClean F AUT fully automatic CIP system, 4 x 5000 L, 30 m³/h Process: GEA TDS plant with flash pasteurizer, mixer, carbonator, degasser and process tanks Preforms: Preform tipper/kipper and feeding conveyors; Krones Contifeed RS preform feeding system; Prejet Linear preform cleaning unit Caps: Cassner cap feeding with cap rinsing and sterilization Blow molder: Krones Contiform S12M, directly connected to the ultra-clean bloc (no air conveyor) Filler/Capper bloc: Krones Volumetric VODM-PET 2.160-66-103 with integrated capper; Krones Vario Dos filler-bloc cleaning Coding and inspection: Domino DDC 3 laser coder; Krones Checkmat 731 FM-X+L filling level inspector; Krones Checkmat 731 EM label inspector Conveying and testing: SYNCO bottle conveyors; Krones Flowliner bottle leak tester Labeller: Krones Contiroll OPP 720-15, double roll-feed wrap-around labels with hot glue Secondary packaging: Krones VarioPro FS shrink–tray packer; Krones Multico S packet conveyors; Twin Pack handle applicator Pack coding: Leisinger Jet 3 ink coder Palletizing: Krones Robopox Modulpal (2016) Advanced Automation & Control Systems Line Control & PLC Siemens Simatic S7-series PLC for coordinated line control, interlocks and diagnostics Integrated filler-bloc cleaning via Krones Vario Dos for validated ultra-clean cycles Recipe and parameter management supporting fast changeovers between PET formats Quality Assurance & Traceability Laser date coding (Domino DDC 3) on primary packaging; inkjet coding (Leisinger Jet 3) on packs In-line inspection with Krones Checkmat systems for fill level and label presence/position Leak detection via Krones Flowliner for container integrity Production Line Integration Capabilities Upstream (Preforms to Bottles) Automated preform handling: tipper, conveyors and Krones Contifeed RS for steady feed Preform cleaning (Prejet Linear) to protect blowing ...

Condition: used, Year of construction: 2019, machine/vehicle number: LC591, Technical Specifications & Performance Data This complete used bottling line is engineered for beverage production with PET and glass bottles. Optimized for water and carbonated soft drinks, it combines reliable filling, labeling, and end-of-line packaging with robust utilities and process equipment. The line integrates components from reputable manufacturers to deliver consistent quality and uptime in industrial packaging environments. Production speed: up to 8,000 bottles per hour Compatible bottle formats: 0.33L, 0.5L, 0.75L, 1.0L, 1.5L, 2.0L Containers: PET and Glass bottles Main filler/capper/rinser: Sinkrofill 40/50/10/10, 50 filling heads, 3–5 capping heads Blow molder: Easy Blow 4L (4,200 bph nominal) Labelers: Gernep Rollfed 8-480-1RA (foil/OPP) and Gernep Soluta 10-640 3SK (paper), up to 10,000 bph Pack & handle application: SMI LSK 30 T Ergon shrink wrapper, SMI Pack HA-25 SX handle applicator Pallet logistics: Sinkrotech APM-6000-JU palletizer; Atlanta Mytho-A pallet wrapper; auxiliary manual wrapper Process & utilities: GEA pasteurization station HTF 3000PIN/19; GEA CIP station; Trane Tracer CH535 CGAX/SXAX chiller; Therminus steam boiler (456 kW); Kaeser compressors (CSDX 165 and N 502-G boosters) Inspection & coding: FT System control for volume/cap/label; Hitachi UX printer Advanced Automation & Control Systems The line features modern automation and quality assurance for stable operation and repeatable product quality. A PLC-controlled architecture coordinates rinsing, filling, capping, labeling, and packaging, while inline inspection and coding ensure compliance and traceability. PLC/HMI: PLC installed for centralized control and recipe management Inspection: FT System for volume, cap presence/position, and label verification Electrical: 400V, 50 Hz, 16A reference (component level) Coding: Hitachi UX inkjet printer for date/lot marking Changeovers: Designed for multiple bottle formats across PET and glass Rsdpfxjyhbibo Aa Uep Safety: Standard guarding and emergency-stop circuits across stations Production Line Integration Capabilities Built for flexible beverage production, the line integrates upstream preform handling and blow molding with downstream conveying, labeling, and packaging. Vetromeccanica air conveyors and line conveyors provide smooth bottle transport and accumulation. Upstream: Preform conveyor and hopper, Easy Blow 4L blow molder Conveyors: Vetromeccanica Eolo air and line conveyor systems Format flexibility: 0.33L to 2.0L across PET and glass End-of-line: Shrink packaging, handle application, palletizing, and pallet wrapping Utilities integration: Chiller, steam boiler, compressors, air tanks, water treatment Machine Condition & Maintenance History The used bottling line remains in production and can be started during an on-site visit for demonstration. Manuals an...

Year of construction: 1994, condition: good (used), Good working condition and reliable granulator Rodpjhfm Txjfx Aa Uop Ideal for injection moulding parts granulation Low consumption motor: 12kw

Year of construction: 2025, condition: new, functionality: fully functional, rotor diameter: 660 mm, rotor width: 1,200 mm, Genox GXC1200T Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 90kW Drive Motor with outboard rotor bearings (110kW & 132kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. 1,200mm wide x 660mm diameter cutting chamber with a choice of either a 10 knife/5 row or 14 knife/7 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 60 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required. Rsdox Ardwepfx Aa Ujp

Year of construction: 2025, condition: new, functionality: fully functional, rotor diameter: 660 mm, rotor width: 1,600 mm, Genox GXC1600T Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 110kW Drive Motor with outboard rotor bearings (132kW & 160kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. 1,600mm wide x 660mm diameter cutting chamber with a choice of either a 5 row or 7 row V Cutting Rotor. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. Rsdpfxex Arc He Aa Uop All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Year of construction: 2025, condition: new, functionality: fully functional, rotor diameter: 520 mm, rotor width: 1,200 mm, Genox GXC1200 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 75kW Drive Motor with outboard rotor bearings (90kW & 110kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 1,200mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 60 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Rjdpsx Arcyefx Aa Uop Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Year of construction: 2025, condition: new, functionality: fully functional, rotor diameter: 520 mm, rotor width: 800 mm, Genox GXC800 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 55kW Drive Motor with outboard rotor bearings (75kW & 90kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 800mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 40 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Rjdpfx Aex Arcgea Uep Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.