Used Perforating Press for sale (12,932)

Condition: used, Year of construction: 1970, pressure 40 t stroke 150 mm serial number 100091 Njdpfx Adovxltbo Nswb 2 Druck & Hub verstellbar pressure 25 t weight je 1,5 t safety light frame ja bei beiden

Condition: good (used), Year of construction: 1987, fabric-no. 202 395 working length 2550 mm output 2000 KN tracking travel 13 mm Nsdpfx Aoq Awh Rsd Njwb safety distance 176 mm

Condition: used, Year of construction: 1994, Hans Schoen NH65 pressure 65 t Nedpfx Aovrk Epod Nowb +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1980, . 52965 pressure 10 t oil contents 110 Liter Njdpfx Asvxlr Dsd Nswb +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1970, ja weight of the machine ca. 9,5 t serial number 10457/2 160000 KG stroke of worktool slide 41 Hub/min +++++ Please note: Nedpfx Adovvx Exo Newb The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Year of construction: 1964, pressure 7 t Nwodpeqy Rn Tjfx Ad Nsb weight 0,9 t 1417

Condition: used, This is a pallet offer of 60 per block pallet. Nwsdpfjw Sw Axox Ad Njb Used 600x400x190 mm plastic stacking bin. The design of this bin follows the Euronorm of 600 x 400 mm, a standard size which is easy to integrate into logistics processes that also use these dimensions. The open handles on the short sides make it easy to handle and move the

Condition: used, Year of construction: 1980, control panel Boschert Stanze Year 1990 Nedpfx Adox U A H Nj Nowb +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1999, hydraulic ja Nedpsx U A Tvjfx Ad Nswb 100 t weight of the machine ca. 2,9 t

Condition: as good as new (ex-display), The AHK M 1230 NC is a robust press brake from the renowned KNUTH brand, designed as a modern, cost-effective alternative to traditional CNC press brakes. This versatile machine is well-suited for operators who prefer working without complex CNC programming, featuring a user-friendly touchscreen interface for direct positioning of the back gauge along the X and R axes. The machine's high-precision steel construction and hydraulic design ensure excellent rigidity and durability, accommodating intricate bending sequences. With a pressure force of 30 tons and a bending length of 1,250 mm, it is ideal for processing various materials and contours. Noteworthy standard equipment includes the Weintek 7'' NC control, motorized back gauge, and light curtains, which enhance both safety and productivity. You can confidently order this reliable press brake online to elevate your sheet metal processing capabilities. Nwedemf Tilepfx Ad Njb

Condition: used, Year of construction: 1990, pressure 25 t total power requirement 4 kW 200 mm inward space Nwjdpfx Adexzk S De Nob

Condition: used, Batch offer consisting of 28 Euronorm stacking bins 600 x 400 mm. A versatile and durable solution for storing, sorting, and transporting goods in professional environments. Njdpfoyccx Tjx Ad Newb Thanks to the standard Euronorm dimensions, this stacking container fits seamlessly into existing logistics systems, roll containers, racks, and pallets,

Condition: used, Pallet offer consisting of 72 used stackable plastic euro crates with dimensions 500x300x260 mm. A versatile and durable solution for storage and transport. This type of crate is made of high-quality plastic, which ensures a long service life and resistance to influences such as moisture and temperature fluctuations. The stacking Nedeyccywspfx Ad Newb

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 83245, control type: CNC control, actuation type: hydraulic, controller manufacturer: Robosoft, controller model: BC59 T Grafisch, bending force (max.): 135 t, type of crowning: CNC-controlled, power: 15 kW (20.39 HP), HACO ERMS 30135 (83245) Technical condition: Good, used Bending length: 3100 mm Tonnage: 135T Type of press brake: Synchro Backgauge: Y1 + Y2 + X CNC controlled, R-axis manual Nwedpsyc Ncfsfx Ad Nob Backgauge length: 800 mm Crowning: Yes (CNC controlled) Daylight: 400 mm Throat depth: 250 mm Stroke: 200 mm Control: BC 59T Graphical 2D control Motor power: 15.0 kW 400V Tools: Yes, multiple sets of press brake tools Tooling system: European standard Serial number: 83245 Year of manufacture: 2008 Total length: 3500 mm Total depth: 1700 mm Total height: 2500 mm Weight: 7800 kg Serial no.: 83245

Condition: used, This unicraft hydraulic workshop press, model: WPP 50 E, is being auctioned online in our industrial auction / machinery auction for the closure of Hofer Getriebetechnik – workshop equipment, lifting platforms, tools, machines, forklifts, office furniture, metal cabinets. You will find this and many other items on our platform. Njdpfjydaqcox Ad Njwb

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 12638, electrically heated, with step plate, gold anodised plates, Nsdpsybbm Tjfx Ad Njwb dimensions 2950 x 1600 x 2250 mm, new heating plates in 2023, 21.1 kW, operating pressure 355 bar, 4 x 90 mm cylinders, pressing pressure 2.7 kg/m², pressing force 900 kN, press chamber height 400 mm, pressing area 2550 x 1350 mm, 3.44 m², weight approx. 5 t very good condition Price ex location Transport can be arranged at extra cost!

Condition: new, Year of construction: 2026,

Condition: new, Year of construction: 2026, operating hours: 8 h, Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Nsdpfxsxfwdo Ad Nowb Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: as good as new (ex-display), Year of construction: 2025, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Including 1 year warranty. Your advantages: + Very robust, simple technology + Top price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning / established machine Including control cabinet with timer operation Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off. Technical data: Briquette dimensions: approx. 30 x 30 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity: up to a maximum of 20 kg/h. *depending on material Machine dimensions approx. 137 x 75 x 148 cm (length x width x height), Weight of the machine: approx. 250 kg, Capacity of the silo: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: -Wood chips and dust smaller than 15 mm in length -Moisture content less than 18 % ATRO -Sand, stones, metals and minerals increase wear --- Options at extra charge: --Timer function + 490 € net Njdpsd Nnwlofx Ad Nswb Machine is started manually and switches off automatically after a set time X. -Level indicator for automatic operation + 1450 € net Press starts and then stops automatically * NEW !!! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + 890 € net (delivery time then approx. 8 weeks) - Special pressing units + 2.950 € net ---

Condition: ready for operation (used), Year of construction: 2004, pressing force: 200 t, power: 0.045 kW (0.06 HP), Packing press 30x30 Mercury 120 year of manufacture 2004 ready for immediate collection in 8000 Zurich, Switzerland weight: 11 tons Nodpfxjttat Ae Ad Nswb Press is ready for use and immediately available

Condition: new, Year of construction: 2026, Production time appr. 4 months Our best-selling briquetting press series + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several hundred machines in use with satisfied customers + Good price performance ratio Throughput approx. Up to 200 kg per hour * strongly dependent on the material. - in the last test with aluminum granules smaller than 5 mm - approx. 186 kg per hour + the pressed emulsion. - in the last test with aluminum chips smaller than 18 mm - approx. 120 kg per hour + the pressed emulsion. Technical specifications: Nwjdpfx Adochqxxe Neb Motor: 7.5 KW + 0,55 kW Cooler 400 volts / 50 Hz / 3-phase, Front bush: 125 mm, Briquette stroke max .: 100 mm, Briquette stroke opt .: 80 mm, Pump: 80 liters, Storage container approx. 0.5 qbm content (expandable), Diameter: 1200 mm, with agitator discharge, Hydraulic unit complete with oil tank 220 liters Dimensions approx. 2095 x 1600 x 1310 mm lxwxh, Weight 1370 kg, Automatic on-off switching via level indicator CE compliant. . Requirements for the raw material: - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of magnetic metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: as good as new (ex-display), Year of construction: 2025, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) Demonstration machine with approx. 10 operating hours Your advantages: + Very robust, simple technology + Top price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning / established machine Including control cabinet with timer operation Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off. Technical data: Briquette dimensions: approx. 35 x 35 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity up to 25 kg / h *depending on material Machine dimensions approx. 137 x 75 x 148 cm (length x width x height), Weight of the machine: approx. 250 kg, Capacity of the silo: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: -Wood chips and dust smaller than 15 mm in length -Moisture content less than 18 % ATRO -Sand, stones, metals and minerals increase wear --- Options at extra charge: -Timer function + 490 € net Machine is started manually and switches off automatically after a set time X. -Level indicator for automatic operation + 1450 € net Press starts and then stops automatically Nsdpsfci D Aefx Ad Nswb * NEW !!! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, C7m2mgj Surcharge + 690 € net (delivery time then approx. 8 weeks) ---

Condition: good (used), Year of construction: 1987, functionality: fully functional, Clamping unit heating capacity, 1 heating rod / 8 heating rod: 0,48 / 0,9 kW clamping force: 2 x 500 kN heating plate dimensions: 550 x 600 mm piston stroke: 250 mm Nwodsycug Njpfx Ad Nob diameter of piston, main cylinder: 240 mm diameter of piston, locking cylinder. 39 mm locking cylinder: 260 mm Return capacity: 2 x 600 kN dimensions: 2600 x 2100 x 2100 mm weight approx.: 5 t

Condition: excellent (used), Year of construction: 2006, Dimensin: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Daylight: 150/180 mm Nwsdpfxeycugvo Ad Neb Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Year of construction: 1997, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Nwjdpfx Adoycugpe Nob Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s