Used Pendulum for sale (635)

Condition: new, empty load weight: 1,140 kg, maximum load weight: 2,360 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 2,100 mm, loading space height: 350 mm, loading space volume: 3.4 m³, color: silver, construction height: 1,360 mm, working width: 2,150 mm, E-hydraulics / emergency hand pump / three-way tipper / tiltable loading area, automatic reversing, drive-on ramp, tiltable loading area, hot-dip galvanized, * IMMEDIATELY AVAILABLE * incl. E-hydraulics / emergency hand pump / three-way tipper / tiltable loading area Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,500 kg - Unladen weight: 1,140 kg - Payload: 2,360 kg - Interior dimensions: 400 x 210 x 35 cm (L x W x H) - Overall exterior dimensions: 545 x 215 x 136 cm (LxWxH) - Loading sill height: 63 cm - Tires: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic REINFORCED - 100 km/h: at extra charge - incl. Vehicle documents Vehicle superstructure: - Floor: Galvanized steel plate on Finnish wooden multiplex plate - Side walls: Anodized aluminium double-walled, 3x foldable & removable - Side wall height: 35cm - Chassis: High loader, ALKO rubber spring axle - Tipping function: Yes, three-sided + tiltable - Hydraulics: Electric & emergency hand pump tipping - Tipping angle: approx. 45 - Steps hydraulic cylinder: 5 steps - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Attachment: at extra charge - Lashing eyes: 8 pieces in the floor (750kg/daN) - Supports: without - Ramps: drive-on flap can also be used as pendulum flap, approx. 1000kg loadable, covered with aluminium chequer plate - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Anodized aluminium drop sides, double-walled - Drop sides can be folded to the side and rear - Drop sides removable - Lifting flap can also be swivelled + drive-on 1000kg loadable - Galvanized steel plate on Finnish wooden multiplex plate - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many options available - Many options available. hot-dip galvanized - many stable cross beams therefore high point load - additional longitudinal struts continuously welded - E-hydraulics for tilting with battery in the box and cover - cable remote control removable with magnet - external battery charging socket for 230V charger - emergency hand pump, for manual tipping when the battery is empty - automatic reverse drive - ALKO overrun device and parking brake - rear ramp for tilted function - long lever locks - very sturdy bolted V-drawbar REINFORCED - 13-pin plug - reversing lights - large reversing lights plug - reversing lights - large-dimensioned safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel, reinforced version from ALKO - registration papers: COC papers Special equipment included in the price: - Sheet steel mounted on multiplex floor Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - 100cm corrugated grid attachment - spare wheel - storage box - battery - 230V charger - flat tarpaulin - high tarpaulin - net hooks - additional lashing eyes - slotted-hole rails for tension belts & locking beams - bar strip with rubber coating for tension belts & locking beams - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer Ijdpfx Afju Hrn Eensan

Condition: new, * IMMEDIATELY AVAILABLE * Includes pendulum tailgate / Tridem / Double hydraulics / Steel side panels TECHNICAL DATA • Brand: Brian James • Model: Tipper 526 • Vehicle type: Rear tipper • Vehicle condition: New vehicle Iaodpfx Afox Tcfienjn • First registration: None • MOT/Inspection: 2 years from first registration • Internal dimensions (LxWxH): 400 x 200 x 30 cm • External dimensions (LxWxH): 530 x 211 x 102 cm • Platform height: 71 cm • Gross vehicle weight: 3,500 kg • Unladen weight: 1,200 kg • Payload: 2,300 kg • Chassis: High loader (wheels under body) • Tyres: 195/60R12C • Suspension: ALKO rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Steel side panels • Click & Clamp: The new "Click & Clamp" system for maximum strength and rapid addition/removal of various optional side panels and accessories • Automatically adjustable stanchions and clamped side panels ensure smooth travel without unwanted rattling • Robust built-in latches on all side panels • All side panels foldable and removable • Removable steel corner stanchions • Socket mounts on all 4 corners for tarp frames, mesh extensions, side panel extensions, or front panel extensions • Welded-on net hooks under the platform • Sturdy, rattle-free tension latches on side panels • Galvanized steel sheet on multiplex flooring • Reinforced, solidly bolted V-drawbar • Very robust welded steel frame • Frame completely hot-dip galvanized • Multiple cross members for high point load capacity • Additional continuously welded longitudinal beams • 8 recessed lashing points inside the floor (1000DaN/kg), TÜV certified! Covered with spring steel plates beneath • Swinging rear tailgate on hot-dip galvanized steel • U-profile at rear for easy ramp attachment • Integrated ramp slots for optional loading ramps • Twin heavy-duty 4-stage XL hydraulic cylinders • Electric hydraulic pump with battery (12V/90AH) • Detachable remote control for electric hydraulics • External battery charging socket for optional 230V charger • Battery trickle charge: Battery is charged via the vehicle's ignition when the engine is running (depends on towing vehicle) • Battery charge status display • Battery master switch • Maintenance support bar under the platform for service work • ALKO rubber suspension axles • Automatic reversing mechanism • ALKO overrun device and parking brake • Cast steel coupling head with integrated ALKO high-security lock • Tool/storage box mounted on the drawbar • Spare wheel at the rear of the trailer • 13-pin connector • Reversing lights • Complete LED lighting: Extremely bright, durable, and reliable • Dynamic LED indicators • Integrated rear fog light • Various marker lights front, side, and rear • Rear frame lighting recessed • Heavy-duty jockey wheel • 5-year chassis warranty Additional accessories can be retrofitted – please enquire! New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery available - All prices include VAT - Vehicle registration document can be sent in advance, or export plates (Germany) can be provided - Export plates including customs clearance possible Descriptions and images are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg - Errors, omissions, and prior sale excepted -

Condition: new, empty load weight: 1,062 kg, maximum load weight: 2,438 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,750 mm, loading space width: 1,800 mm, loading space height: 300 mm, loading space volume: 2.1 m³, color: silver, construction height: 990 mm, working width: 1,860 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle - TÜV: 2 years - Availability: IMMEDIATELY!!!! - Floor: FULLY MASSIVE STEEL FLOOR - Extremely robust - Gross vehicle weight: 3,500 kg - Unladen weight: 1,062 kg - Payload: 2,438 kg - Interior dimensions: 375 x 180 x 30 cm (L x W x H) - Overall exterior dimensions: 511 x 186 x 99 cm (L x W x H) - Loading sill height: 69 cm - Tires: 195/50R13 steel rim - Brakes: yes - Support wheel: yes - Incl. Vehicle documents (letter) Standard equipment: - New dropside hinges incl. very simple attachment option for a cargo net, among other things. - Anodized double-walled aluminium drop sides - All drop sides foldable all round - All drop sides removable - Fully solid steel floor ? extremely robust - Very sturdy welded steel frame - Frame completely hot-dip galvanized hot-dip galvanized - many sturdy cross beams for high point loading - additional longitudinal struts welded in throughout - pendulum flap at the rear - 8 lashing brackets recessed inside the side edge TÜV certified to 1000DaN / kg - lashing hooks welded to the bottom of the frame - automatic reverse drive - KNOTT overrun device and parking brake - sturdy eccentric locks - very sturdy bolted V-drawbar STRENGTHENED - 13-pin plug - reversing lights + large rear lights - large rear lights + large rear lights. Plug - Reversing light + large safety lighting - Integrated rear fog light, lighting recessed in rear frame - Automatic center support wheel - Solid 5-stage hydraulic cylinder Special equipment included in the price: - Electric operation 12 volt - Low chassis, tires 195/50R13, loading floor height : approx. 64cm - Parabolic suspension incl. shock absorber for 100km/h mounted instead of rubber-sprung axles. - Parabolic spring axle with shock absorber for absolute driving comfort! We are happy to offer you suitable financing! New vehicle with warranty and TÜV, descriptions and pictures are protected by copyright! Over 800 trailers immediately available for you! We have been Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Specialist dealer & repair workshop for over 30 years - Delivery throughout Germany possible with surcharge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Iajdpfxju Skydj Afnen

Condition: ready for operation (used), Year of construction: 2010, x-travel 10000 mm y-travel 1500 mm z-travel 1000 mm passage 1300 mm passage width 1500 mm control Siemens Sinumerik 840 D turning speeds 2 Stufen: 6000 U/min Number of working hours 54821 h tool taper SK 50 Boring power 120 mm thread capacity M 55 toolpiece magazine: chain magazine 30 Stück rapid traverse X-axis 36000 m/min rapid motion Y-axis 30000 m/min rapid traverse Z-axis 30000 m/min total power requirement 36 kW dimensions of the machine ca. 12 x 11 m Gantry-style milling machine with movable portal bridge and stationary clamping table. Features: • Clamping table designed with transverse clamping beams spaced 750 mm ndard panel panels are not included. Panel panels must be purchased separately if required. • Hydraulic clamping device with clamping bridges for axis machining, includinghydraulic system • Angle drilling and milling head, n = 4000 rpm SK50 Iodpfxsx S Rx Ie Afnsan • High accuracy and stability thanks to Hirth gearing • Automatic tool change in the angle head • RWP20.50-M touch probe • Pendulum operation • Safety fence with light curtains, Sick brand • Clamping table with 750 mm transverse clamping beams • 30-position tool chain magazine on the gantry frame • Machine cooling system • Integrated water-to-air heat exchanger in the control cabinet • Unisign remote diagnostics for Siemens Sinumerik 840 D • Makrolon curtains on both sides of the gantry bridge motorized height adjustment • Partition wall with viewing window • Chip conveyor with hinged belt design • Mounting and alignment elements • Documentation Accessories: 1 spare SK50 angle drill and milling head 1 spare Hexagon RWP 20.50-M touch probe 1 2500 x 1200 mm T-slot clamping frame, which can be installed on the machineinstead of the hydraulic device. Various spare parts

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 6,670 mm, travel distance Y-axis: 695 mm, travel distance Z-axis: 585 mm, controller manufacturer: HEIDENHAIN, controller model: ITNC 620, table load: 500 kg, overall weight: 6,500 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,500 W, number of axes: 3, This 3-axis URBAN PF 6500 milling machine was manufactured in 2009. It features a Heidenhain ITNC 620 CNC control, a 12-position tool changer, and a spindle capable of 6000 rpm. The machine offers a machining length of 6500 mm and supports a table load of up to 500 kg/m. Additional features include a special hydraulic/pneumatic clamping unit and safety fencing. A great opportunity to buy this URBAN PF 6500 milling machine. Contact us for further details regarding this milling machine. Additional equipment • Heidenhain HR130 handwheel: Yes • Control panel: Can be moved along the entire length • Tool cooling: By compressed air/cold air down to -20°C • Automatic central lubrication system: Yes • Chip tray: With 6 drawers • Safety fencing: Yes Ijdpsx D R Dlefx Afnsan • Special hydraulic/pneumatic clamping unit: 2x4-fold for bar and profile processing • Quick clamping units: 6 4-fold per side • Pendulum operation: 2 working areas with 2650 mm processing length each • Tool Changer: 12-position tool changer with disc magazine Machine Benefits Qualitative Machine Benefits • Precision control with heidenhain itnc 620, enhanced safety with safety fencing and safety zone Technical Machine Benefits • Clamping stroke: 55 mm • Clamping range: 28-80 mm • Safety zone: 1200 mm • Long machining length of 6500 mm, tool cooling by compressed air/cold air down to -20°c, pendulum operation with 2 working areas for increased efficiency Extra Information Machine still under power

Condition: used, axle configuration: > 3 axles, first registration: 02/2009, color: other, Year of construction: 2009, = Additional options and accessories = - Beacon(s) - Drum brakes - Flashing light - Hydraulics - Lift Axle - Power steering - SAF Axis - Steering axle - Toolbox - Work lamp(s) = Remarks = Nooteboom EUR - 111 - 25 TD, 2009, 2 axle dolly pendulum X + 5 axle SAF axle steered euro low loader, 7 axles steered, 4 lifting axles including dolly, Removable neck, Remote control controllable, Hydraulic suspension, Boom slot, Expanders, Completely original and not sprayed! Belgian registration = More information = GVW: 125.000 kg = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! Iasdpfx Afoykbpajnen - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, axle configuration: > 3 axles, first registration: 02/2009, color: other, Year of construction: 2009, = Additional options and accessories = - Beacon(s) - Drum brakes - Flashing light - Hydraulics - Lift Axle - Power steering - SAF Axis - Steering axle - Toolbox - Work lamp(s) = Remarks = Nooteboom EUR - 111 - 25 TD, 2009 (Dolly 2011), 138800 kg (30 km/h Special transport), 2 axle dolly pendulum X + 5 axle SAF axle steered euro low loader, 7 axles steered, 4 lifting axles including dolly, Removable neck, Remote control controllable, Hydraulic suspension, Boom slot, Expanders, Completely original and not sprayed! Iaedpfoykbd Rsx Afnon Belgian registration = More information = GVW: 138.800 kg = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: good (used), Year of construction: 2007, Used Mazak Machining Center X-axis travel: 1,740 mm Y-axis travel: 760 mm Iaedpfeyfmz Dox Afnon Z-axis travel: 660 mm Rapid traverse X-axis: 36 m/min Rapid traverse Y-axis: 36 m/min Rapid traverse Z-axis: 36 m/min Table size: 2,000 x 760 mm Table load capacity: 1,400 kg Distance from table surface to spindle nose: 160 mm - 840 mm Including magnetic table Spindle speed: 12,000 rpm Main drive power (5 min rating): 18.5 kW Main drive power (30 min rating): 11 kW Tool changer: Number of stations: 30 Spindle taper: SK 40 Max. tool diameter: 80 mm Max. tool diameter with adjacent stations empty: 110 mm Max. tool length: 350 mm Max. tool weight: 8 kg Control: Mazatrol 640M Interfaces: RS232, LAN, floppy disk drive Dimensions & Weight: Dimensions (L x W x H): 4,435 x 3,300 x 3,442 mm Machine weight: 12,000 kg Included: Various tools + Renishaw probe Documentation/manual Chip conveyor Partition for pendulum machining Electronic handwheel EIA / ISO programming Synchronous tapping Through-spindle coolant 5 bar A complete, very good machine, immediately available!

Year of construction: 1964, condition: good (used), Diskus Werke DSH 600/1000 Side Face Grinding Machine  This machine type is a machine with a motor-driven grinding spindle. Clamping and grinding of the workpieces is done with clamping devices adapted to the respective work. The devices are attached to the machine bed. The column saddle, on which the motor spindle is mounted, serves as a feed, dressing and pendulum slide. Manufacturer: Diskus Werke Model: DSH 600/1000 Serial number: 6299 Type: Side surface grinding machine Cooling lubricant: Isocool 1020 BF Coolant volume: 400 litres Concentration: 2.5% (x factor 1.6 ≙ 4%) Year of manufacture: 1964 Condition: used  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Iodpfxohtyudj Afnean Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening during reverse tipping, side walls pendulum-mounted and foldable, side drop sides with spring relief, platform floor made of 4 mm fine-grained steel, 8 heavy-duty recessed lashing rings in the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear, 45 degrees to the side, stepless height-adjustable drawbar, removable stakes at the rear, gear support winch with load and quick mode in front, integrated storage compartment for two aluminum loading ramps in the chassis, lockable ramp compartment (privacy cover), contour marking according to ECE R 048 regulation, vehicle with day registration, rental price from €550. Typing errors, mistakes and changes reserved, sample images. More data at: !, More details: ! Iasdpfsykkfqox Afnen

Condition: new, empty load weight: 2,950 kg, maximum load weight: 10,050 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,080 mm, loading space width: 2,420 mm, suspension: steel, tire size: 2, color: other, gearing type: other, front tire size: 2, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, central locking for side and rear drop sides, automatic rear panel opening when tipping backwards, side panels are pendulum-mounted and foldable, side drop sides with spring assistance, platform floor made of 4 mm fine-grained steel, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear, 45 degrees to the side, gearbox support winch with load and fast mode, at the front, contour marking according to ECE R 048 regulation. -- Subject to errors, changes and misprints, sample images -- For more data see: !, More details: ! Iasdpfx Asykkfwefnen

Condition: new, Hydraulic winch for wood splitter, crane, mini excavator, tractor, tractor, viticulture, horticulture and many more applications. With hydraulic winch mounted to help to many applications. -Firewood to the wood splitter drag and set up -The logs move trailer -Remove rootstocks and trees -As growing winds at Rueckekraene and small excavators -As a winch for small tractors and narrow track tractors Iajdpfxodf Ud So Afnon A robust steel construction with 3-sided bolt-on option (left, right, rear) 12 threaded holes, this provides many options to attach the winch (threads are cut and painted. You must cut before using with the taps because of the rust protection). It is a 20 m long and 6 mm strong steel cable mounted. Large pulley for long service life of the steel rope. We attach the hydraulic motors from 50 to 630 CC (default = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar top Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 nm peak Torque in continuous operation: 380 nm Maximum tractive effort: 1700 kg Weight: 49 kg Line speed: 47 m / min for 60 L / min hydraulic oil Color: Red Dimensions: Length: 500 mm Pendulum length: 570 mm Front width: 120 mm Rear width: 180 mm Wide storage: + 30 mm Wide engine:

Condition: new, functionality: fully functional, rope length: 30,000 mm, rope speed: 47,000 mm/min, machine/vehicle number: HAW1700-EV-Funk, Hydraulic winch for log splitter, crane, mini excavator, tractor, viticulture, horticulture and many other applications. With the hydraulic attached winch, you can facilitate many applications: Iodpfx Afedf Ufponsan - Pulling firewood to the log splitter and setting it up - Pull logs onto trailers - Pull out rootstocks and trees - As a winch for backhoes and small excavators - As winch for small tractors and narrow track tractors A sturdy steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, this offers many possibilities for mounting the winch (threads are cut and painted.) The winch can also be used as a power winch. They need to be re-tapped with the tap before use because of the rust protection). A 20 m long and 6 mm thick steel cable is mounted. Large pulley for long life of the steel cable. We mount hydraulic motors from 50 to 630 cc (standard = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar peak Continuous working pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum tractive force: 1700 kg Weight: 49 kg Rope speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: length: 500 mm length with pendulum: 570 mm Width front: 120 mm Width rear: 180 mm Width bearing: + 30 mm Width motor: + 200 mm Height: 250 mm The winch is available for mounting or for welding on

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH secondary impact crushers set the standard in rock crushing machine technology with their high efficiency and superior crushing performance. These crushers are specifically designed to meet high-capacity production needs. Thanks to their robust body structure and optimized rotor design, they deliver a perfect cubic-shaped final product even with hard and abrasive materials. The three-stage pendulum system allows primary, secondary, and tertiary crushing operations to be performed on a single machine. This minimizes time loss in the production process while maximizing efficiency. High chrome or manganese alloy cutting bars offer long life and low maintenance costs. The hydraulic opening system maximizes operating time by facilitating maintenance and part replacement. CONSTMACH secondary impact crushers offer a reliable solution for any rock crushing plant thanks to their high reduction ratio and wide discharge opening. Secondary Impact Crusher Technical Specifications CSI-1210 Rotor Diameter: 1,100 x 1,100 mm Maximum Feed Size: 200 mm Production Capacity: 60 - 100 t/h Motor Power: 160 kW Weight: 17,500 kg CSI-1212 Rotor Diameter: 1,100 x 1,250 mm Maximum Feed Size: 250 mm Production Capacity: 120 - 150 t/h Motor Power: 200 kW Weight: 21,500 kg CSI-1215 Rotor Diameter: 1,100 x 1,500 mm Maximum Feed Size: 350 mm Production Capacity: 200 - 250 t/h Motor Power: 250 kW Weight: 26,000 kg Iedpfxjxqgtio Afnsan Why Choose CONSTMACH Secondary Impact Crushers? CONSTMACH prioritizes quality and durability in the production of stone crushing machines. Our secondary impact crusher models reduce operating costs with their long-lasting components, low maintenance requirements, and high performance. They offer guaranteed uninterrupted operation with an extensive service network and easy access to spare parts. Each model is designed to suit different production capacities, providing the most suitable solution for your facility. With reliable engineering, high production standards, and a customer-focused service approach, CONSTMACH is always one step ahead in the stone crushing industry. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Iaedpexnldbsfx Afnon

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Iaedjx Twdyopfx Afnsn

Condition: used, Year of construction: 2006, · Working area: 2,650 x 1,240 mm · Travel distance X-Y: 2,995 x 1,385 mm · Z-axis travel length: 200 mm · Clearance height: 180 mm The basic frame structure is a monolithic construction made of thick-walled steel. It is reinforced across the entire machine bed with welded triangular plates, making it extremely stable. The use of the triangle shape with a broad base for load-bearing parts is the secret to permanent precision and stability. The layout of the machine allows the operator an optimal workflow while requiring minimal floor space. The resulting frame provides a balanced and secure base for the machining unit with outstanding load distribution. The mobile aggregate carrier is constructed as a solid monoblock. It is positioned along the X-axis on prismatically ground guides via recirculating ball carriages. The machining unit, in turn, is mounted to the mobile carrier using prismatic, ground rails and recirculating ball carriages. Description of aggregates and accessories (basic configuration) Drilling unit: Drill head with 12 + 6 spindles · 7 individually selectable vertical spindles in X · 5 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill mount: M10 with 11 mm fitting Grooving saw unit in X: · Integrated into the drill head · Grooving saw blade up to max. 120 mm diameter Main milling unit (position 2): · Tool holder HSK 63F · Speed: 1,500 – 24,000 rpm, infinitely variable via inverter · Motor power: 4.4 kW (6 HP) from 12,000 rpm (S1) · Motor power: 6.6 kW (9 HP) from 12,000 rpm (S6) · Right/left rotation · Ceramic bearings · Includes: 4 tool holders (right), without collets R8L Tool changer Automatic tool changing system for 8 tools. Moves along with the rear aggregate carrier for quick tool access. · Number of tool slots: 8 · Max. tool diameter: 120 mm · Max. weight per tool: 4.5 kg · Max. total tool weight: 22 kg · Adapter for 1 angle gearbox · Travels in X direction Horizontal milling unit (position 1) Horizontal unit with two opposing outputs for milling and grooving. · Speed: 9,000 – 18,000 rpm, infinitely variable via inverter · 1 output for collet 3–20 mm (ER 32) · 1 output for saw/collet 3–12 mm (ER20) (for saw D=120 mm / 50 mm bore) · Motor power: 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm Isdpfjx Twccjx Afnjan · Max. saw blade diameter: 100 mm · Saw blade bore (ER 32): 50 mm · Saw blade arbor diameter (ER 20): 12 mm Worktable The worktable is designed to provide the operator with maximum freedom of movement. The quick-action vacuum clamping system ensures maximum flexibility with precise positioning and optimal holding of the workpieces. · 6 supports, 1000 mm, steplessly adjustable pneumatically in X · 12 vacuum cups, round, D = 110 mm, steplessly adjustable in Y (2 pcs. per support) · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (6 in total) · The retractable reference stops are CNC-controlled · Pendulum operation standard (2 working fields) --- other clamping systems optional --- Axis movement The drive system for X, Y, and Z axes uses ground recirculating ball screws of the highest precision class. The recirculating ball drive...

Condition: excellent (used), Year of construction: 1997, Rover 20 machining center Working area 2,893 x 950 mm, milling spindle with ISO30 tool holder 3.6 kW, drilling unit with 10 vertical and 6 horizontal drills as well as grooving saw, 6-fold tool changer. The NC410 control had a floppy disk drive and a colour screen as well as the simplest, graphically supported programming options. Furthermore, the Rover 20 already enabled pendulum machining. Dimensions: approx. 3800 x 2000, height 1600 Control cabinet: 950 x 700 x 1300 Iaodpfolc Dwnsx Afnjn From location

Condition: used, empty load weight: 6,087 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2021, next inspection (TÜV): 01/2026, loading space length: 7,480 mm, loading space width: 2,354 mm, loading space height: 1,460 mm, loading space volume: 24 m³, suspension: air, tire size: 385/65 R22,5, color: blue, Year of construction: 2021, mileage: 291,860 km, Equipment: ABS, Unladen weight: 6,087 kg, permissible gross weight: 36,000 kg, loading area (L W H): 7,480 mm x 2,354 mm x 1,460 mm. Tyre size: 385/65 R22.5, cargo volume: 24 m³. 1st axle: , 2nd axle: , 3rd axle: , air suspension, folding underrun protection, front lift axle, electronic braking system (EBS), pendulum tailgate (flush-fitting), sliding roof, connection plugs 1x15 and 2x7 pin, anti-spray system, light alloy wheels. You can find our complete vehicle range at . Interested in financing? With our Value Added Service, we offer you tailored financing options, full service, and telematics solutions. We are happy to advise you. Iaedpfxoyivh Uo Afnjn

Condition: excellent (used), color: red, Year of construction: 2012, Year of manufacture: 2012 Payload: 1,000,080 kg Extendable body: Yes Technical condition: very good Optical condition: very good GOLDHOFER THP/MT/ST 28 HYDRAULIC AXLE WITH 1X GOOSENECK, 2X POWER PACK, 2X DRAWBAR + DRAWBAR HEADS THP/MT/ST MODULES: 2x 2-axle module 2x 4-axle module 2x 5-axle module 1x 6-axle module 1 heavy duty gooseneck with hydraulic power pack 2x drawbar control kits Central lubrication system BPW hydraulic pendulum axle 8 tyres per axle line Remaining tyre tread approx. 50% Size 215/75 R 17.5 Year of module manufacture: 2009 to 2012 The complete axle set has new German TÜV inspection / APK / MOT Permissible total weight: 1008 tons at low speeds Follow us on Instagram: geurtsTrucks Iasdpfx Asw D E Tdofnen We speak German We speak English We speak Spanish

Condition: used, empty load weight: 5,900 kg, maximum load weight: 33,100 kg, overall weight: 39,000 kg, first registration: 08/2011, next inspection (TÜV): 12/2025, suspension: air, tire size: 385/65 22,5, tire condition: 50 %, color: silver, Year of construction: 2011, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 40136 Schmitz, SKI 24 * Year of manufacture: 2011 * ABS (Anti-lock Braking System) * Air suspension * Lift axle * Air connection coupling head (red + yellow) * Electrical connectors: 2x 7-pin plugs * Electrical connector: 15-pin plug * Raise and lower device * Galvanized * Aluminium tipping body * Catwalk / access platform * Sliding roof tarpaulin * Grain discharge slider * Sludge-proof * Pendulum tailgate * Next inspection (TÜV and exhaust): 12/2025 * Suspension: Air * Gross vehicle weight: 39,000 kg * Unladen weight: 5,900 kg * Payload: 33,100 kg * Permitted gross weight: 39,000 kg * Axle manufacturer: Schmitz Rotos * Tire condition 1st axle: 50% -- 50% | Tire size: 385/65 R22.5 * Tire condition 2nd axle: 50% -- 50% | Tire size: 385/65 R22.5 * Tire condition 3rd axle: 60% -- 60% | Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Model: Schmitz SKI 24 SL 96 * Approx. 50 m³ load volume Iaodpfxoyib R Se Afnon Disclaimer: Subject to change, prior sale and errors excepted. More photos and videos are available on our website. Our comprehensive services include: * Purchase, sale, and rental of commercial vehicles * Fast, hassle-free financing * Processing all (export) documentation * Arranging export and customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV inspections and registration service * Transport and delivery of commercial vehicles Ask our experienced staff – we will be happy to advise you!

Condition: used, empty load weight: 3,200 kg, maximum load weight: 8,700 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 03/2014, loading space length: 6,300 mm, loading space width: 2,470 mm, loading space height: 400 mm, suspension: steel, tire size: 235/75R17.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: in transit, 2 axles, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes, mechanical ramps, front support, rear support, storage box, pendulum flaps, height-adjustable drawbar. Body: Tandem low loader trailer with mechanical access ramps, 2x BPW axles, drum brakes! Iasdpfxsykrh He Afnon All information provided without guarantee as the trailers are in transit! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, interim sale, and errors excepted!

Condition: good (used), functionality: fully functional, machine/vehicle number: WKY3S0139PM046963, empty load weight: 6,100 kg, maximum load weight: 29,900 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 10/2026, loading space length: 9,500 mm, loading space width: 2,350 mm, loading space height: 1,800 mm, loading space volume: 37 m³, suspension: air, tire size: 385/65 R 22.5, color: black, Equipment: ABS, our vehicle number: #30623 Kempf SKM 36/3 aluminium tipper body 37m³ IPH tipping cylinder Teflon floor Pendulum tailgate Watertight (mud-tight) Grain discharge slide Isdpfx Aoxp Hv Ijfnjan Pneumatic lock Loading pressure gauge Roll-up tarpaulin Platform with ladder BPW axles Tyres 385/65 R 22.5 Aluminium rims Disc brakes Lift/lower function Air suspension ABS EBS Haacon drop-down support legs Foldable rear underrun protection Side underrun protection Tool box Fire extinguisher box 2x work lights Financing/leasing available on request!

Condition: used, cutting width max. ca. 600 mm Cutting height max. ca. 120 mm Iaedexrtzpopfx Afnjn feed pneumatisch m/min

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 2,359 h, power: 34.1 kW (46.36 HP), load capacity: 240 kg, mast type: telescopic, lifting height: 27,750 mm, lifting power: 240 kg/m, platform length: 2,300 mm, platform width: 900 mm, overall weight: 16,550 kg, transport length: 11,360 mm, transport width: 2,480 mm, transport height: 2,750 mm, fuel type: diesel, fuel consumption per hour: 10 l/h, fuel tank capacity: 72 l, tire size: 20" foam-filled terreinbanden, tire condition: 85 %, wheelbase: 2,800 mm, ground clearance: 410 mm, color: blue, Equipment: UVV, all wheel drive, differential lock, === KEY SPECIFICATIONS === Year: 2019 Hours: 2,359 h Working height: 27.75 m Max horizontal outreach: 21.45 m Platform capacity: 240 kg (Inside: 350 kg) Platform dimensions (L × W): 2,300 × 900 mm Turret rotation: 360° continuous Platform rotation: 90° / 90° Boom type: Telescopic boom lift Jib: Yes (pendulum arm: +56.8° / –62°) Drive: Diesel Four-wheel drive: Yes Tyres: Foam-filled off-road Stabilisers: No Engine manufacturer: Kubota V2403-M Emission class: Stage 3A Weight: 16,550 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from trusted sources with verifiable history CE certification and complete documentation included Ready for immediate transport and operation Comprehensive technical documentation available === CONDITION === Excellent working condition — fully inspected, serviced, and tested by certified professionals. Inspection available upon request. === LOCATION & DELIVERY === Iodpfx Afexxa E Isnsan Located in Sittard, the Netherlands. Worldwide delivery available. Price: €65,000 (EXW / excluding VAT) Reliable first-owner machine with full service history and expert technical support. All machines are thoroughly inspected, CE-certified, and immediately operational. Spare parts and professional assistance available upon request. === DELIVERY === Crane loading available on request. Flexible worldwide shipping options tailored to your destination. All logistics professionally handled by the Collé Rental & Sales logistics team.