Used Panel Saw for sale (17,132)

Condition: refurbished (used), cutting length (max.): 4,200 mm, cutting height (max.): 70 mm, Panel Dividing System SCHEER PA 4027 – 4200 x 4200 The PA 4027 is a high-performance, electronically controlled beam saw for precise, efficient, and automated cutting of wood-based panels. Ideally suited for industrial use in joineries, furniture manufacturing, and panel processing. Condition & Service: Condition: Very good (completely overhauled by our technicians) Functionality: Fully operational Warranty: 12 months CE compliant / BG guidelines compliant / dust tested (threshold < 2 mg/m³) Main Technical Data & Features: Cutting length / table length / fence depth: each 4200 mm Maximum cutting height: 70 mm 3-position cutting height adjustment Automatic forward & return travel of the saw unit Feed speed: 2 – 50 m/min (infinitely variable) Return speed: 70 m/min Regulated saw unit for reduced withdrawal speed from the material Scoring saw adjustable from outside – without opening the protective cover Residual cut device for precise trimming cuts Semi-automatic angle-pressure device: adjustment range up to 2400 mm Air cushion tables: 1 square stop table 2 workpiece support tables Closed Pertinax surfaces in the square stop area Pusher with parallel fence: 7 clamping fingers Servo drive Feed: max. 25 m/min Return: max. 40 m/min Integrated extraction channels in machine base & pressure beam Protective hood locking with lamella safety curtain Control & Operation: New control unit with modern Ubuntu Linux operating system Proven SCHEER user interface maintained 15" flat screen, keyboard, and mouse on swiveling operator panel Graphical display of cutting patterns & workflows PLC control: Siemens S5 Network capable – LAN & WLAN (compatible with Windows, Linux, Mac, Novell) Remote maintenance & software updates possible via Internet Software / Programs: OPTIMAX (optional): Office optimization, offcut calculation, material requirements OPTIMIN: Direct optimization on the machine PC Processing via USB or online possible Free label configuration & label printing during cutting (optional) Supports manual, automatic, and special operating modes (e.g., grooving, veneered panels) Hnsdpfxjvxid Do Aaceu Reliability in Continuous Operation: This machine is in operation worldwide – under extreme conditions. Whether in the dry climates of Africa or high humidity in Southeast Asia (e.g., Thailand): the PA 4027 runs reliably in 3-shift systems – 365 days a year – and delivers exceptional stability and endurance. Guarantee: We are so confident in the quality and durability of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excludes electrical supplier components and wear parts.) 📞 Contact us for a personalized quote or to arrange a viewing appointment. Machine available from stock. Delivery, commissioning, and training are optionally available.

Condition: ready for operation (used), Technical characteristics En cours de vérification Cutting dimensions : 4500 mm x 4300 mm Max. blade projection from work surface (cutting height): 90 mm Main blade max. diameter 320 mm, 7.5 kW motor (to be confirmed) Scoring blade, max. diameter 150 mm, electronically adjustable CN adjustable blade carriage speed up to 150 m/min Pusher feed up to 70 m/min 4 Air-cushion unloading tables, 1800x 500 mm 9 pneumatic clamps PC-based control, updated Maestro software Remote cycle start control Electronic slot design Optimized blade/pressor travel Hedpfx Aaoucir Djconu Ottimo Perfect Cut optimization, 3D simulator Network and/or USB connection In option : vacuum lifting device, panel gripper. Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions Weight: 4800 Kg

Condition: new, Panel saw HOLZ-HER 1255 SECTOR pro - Exhibition machine - Cutting height 2,200 mm Cutting length 5,300 mm Vertical perfection from HOLZ-HER The vertical panel saws from HOLZ-HER combine proven technology from over 50 years of experience and a rock-solid design that offers you a unique price-performance ratio. offer you a unique price-performance ratio. Your advantages: - Fully welded frame Extremely high rigidity - Precise cutting quality - Finished cut for immediate edge banding - Powerful saw motor with 4 kW output - Space-saving panel layout with a installation area from 4 m² - Smooth and ergonomic operation TRK extraction system (optional in all CE countries): Workstations must meet the highest requirements when it comes to health and safety. HOLZ-HER saws are among the cleanest and safest in the safest in the world. Accessories The extensive range of accessories extends from convenient digital dimension displays through to our our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting panel-shaped wood materials wood-based materials such as chipboard, MDF, veneer panels, multiplex, etc, veneer panels, multiplex etc. Basic machine: Completely welded frame with extremely high rigidity. Precise guidance of the saw beam / saw unit saw unit for an accurate cut. Manual feed feed for vertical and horizontal cutting. Cutting depth: max. 60 mm Saw beam: Sturdy saw beam guided on precision guides. Pneumatic locking of the saw beam at the top and bottom. Electrically monitored in vertical cut Saw unit: Smooth and ergonomic operation for plunging and and removal of the saw unit. Immersion lever can be lever can be folded down in the upper position for precise immersion of the saw unit. Generously dimensioned lever for easy pivoting. Housing cover opens the complete opens the complete saw unit for easy tool change change incl. ProLock quick-action chuck. Light cut-out: Riving knife can be retracted. Control panel: Efficient operation of the machine. Ergonomically positioned at eye level. Lower workpiece support: Sturdy, wear-free stainless steel support. Support up to the cutting line: Narrow workpieces cannot tip or fall through Extraction: Effective extraction with two connections: Saw unit Ø 120 mm, frame end Ø 100 mm (with TRK variant) Lifting roller transport system: Manually liftable and lowerable rollers for easy and and gentle panel transport. Measuring tape: For displaying dimensions for horizontal cutting with three manual dimension displays: Absolute dimension from the lower workpiece support Absolute dimension from the middle workpiece support Serial cuts from the top edge of the panel Hnjdju R Syijpfx Aacju This offer is an equipment package. The following items and options are already included in the price: - Sliding grid - Manual longitudinal stop for vertical cutting - Digital dimension display for horizontal cut - 3 adjustable stop points in the saw beam - TRK SH 2.200 suction device - Strip stop for recurring horizontal cuts - new exhibition machine -

Condition: like new (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 3694/0-912, feed length X-axis: 4,300 mm, feed length Y-axis: 2,100 mm, saw blade diameter: 250 mm, cutting length (max.): 4,300 mm, cutting height (max.): 2,060 mm, cutting depth: 63 mm, cutting height with scoring (max.): 63 mm, extraction nozzle diameter: 120 mm, saw blade speed: 5,450 rpm, input voltage: 400 V, input frequency: 50 Hz, main saw diameter: 250 mm, saw drive: 4 W, Equipment: scorer, Solid all welded frame Cutting length 4300 mm Max cutting high (horizontal cut) 2060 Max vertical cut 2100 mm Max. cutting depth 63 mm Hedpjw Uitusfx Aaconu 4 kW motor Precision guide ways for saw beam and saw unit Grooved workpiece support Automatic shifting back grid Automatic locking beam, automatic locking tilt Scoring unit SUPERCUT Length ruler with 1 stop Central workpiece support over 3 fields Dust extraction 4 mechanical panel rollers

Condition: excellent (used), PANEL BEAM SAW WITH REAR LIFTING TABLE Numerical Control Power Control (CADmatic 4.1 - Professional) Lifting scissor table (mm) 4300 x 2200 Rear pushers (N.) 1 With clamps / grippers (No.) 7 Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 6750 Max blade projection (mm) 110 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 420 / Kw 18 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (No.) 3 + 1 long Total power (Kw) 28 OPTIONAL: No. 1 Printer for labels Hodpfxjd Nt N Us Aaconu Optimizing Software Schnitt Profi(t) Practive

Condition: like new (used), functionality: fully functional, cutting length (max.): 3,100 mm, cutting height with scoring (max.): 70 mm, saw blade diameter: 305 mm, feed rate X-axis: 40 m/min, feed rate Z-axis: 50 m/min, total length: 3,100 mm, total width: 3,100 mm, overall weight: 3,000 kg, power: 7 kW (9.52 HP), space requirement length: 3,100 mm, space requirement width: 3,100 mm, Equipment: rotational speed infinitely variable, scorer, Panel Sizing System SCHEER PA 4136 – 3100 x 3100 The PA 4136 is a high-performance, electronically controlled panel saw designed for precise, efficient, and automated cutting of wood-based materials. Ideally suited for industrial applications in joineries, furniture production, and panel processing. Condition & Service: Condition: Very good Functionality: Fully operational Warranty: 12 months CE-compliant and dust-tested (limit value < 2 mg/m³) Key Technical Data & Equipment: - Rip saw FM 20-3100 with hardened guides - Automatic forward & return travel of the saw unit (automatic lowering during return) - Feed drive via three-phase gear motor, frequency inverter controlled - Feed speed: 2 – 40 m/min (stepless) - Return speed (rapid traverse): 50 m/min - Extraction channels in machine base & pressure beam - Score saw blade adjustable externally (without opening the hood) - Safety hood locking with lamella curtain SZ 5008 - 3-step cutting height adjustment LA 4143 - 6 cut-out sections in the pressure beam for residual cuts down to 5 mm - Saw motor: 7.0 kW | Scoring motor: 1.1 kW (switchable) Hjdpfx Aaswrn Efjcenu - Cutting length: 3100 mm | Cutting height: 70 mm Material Handling & Feed: - Angle pressure device WP 5003 with clamping claw for cross cuts - Adjustment range: 2400 mm - Fully automatic control via DNC-AT - Material feed table HP 5091 - 2 upper guides, rack-and-pinion guidance - Servo drive for material pusher - Feed speed: 25 m/min (safety limited) - Return: 40 m/min - 6 clamping fingers, 4 double roller tracks - Table length: 3100 mm | Fence depth: 3150 mm - Closed Pertinax surface in the area of the angle fence Control & Operation: - Operating system: Ubuntu Linux - Integrated PC with hard disk, parallel & serial interfaces - Network capable (LAN/WLAN), remote maintenance via internet (TeamViewer, Remote Desktop) - USB printing function - Multilingual dialog programming - 15" flat screen, multifunction keyboard on a swiveling control console - Graphic display of cutting plans and processes Software / Programs: - OPTIMAX: Office optimization, waste calculation, material requirements - OPTIMIN: Direct optimization at the machine PC with parts list entry - Processing via USB, diskette or online (optional) - Manual, automatic & special operation modes (e.g. grooving, veneered parts) Additional Equipment: - Angle fence table HP 5085: 1,720 x 800 mm | Pertinax overlay - Workpiece support table HP 5025: 1,720 x 800 mm | Pertinax overlay - Air cushion system LK 5030 integrated in both tables - Circular saw blade KSB 4005: Ø 305 mm, Z = 60 - Circular saw blade KSB 4006: Ø 200 mm, Z = 60, tapered Reliability in Continuous Operation: This machine is in use worldwide – under extreme conditions. Whether in the dry climate of Africa or in high humidity regions of Southeast Asia (e.g. Thailand): The PA 4136 runs reliably in 3-shift operations – 365 days a year – and stands out for its outstanding stability and durability. Warranty: We are so convinced of the quality and stability of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excludes electronic supply parts and wear parts.) 📞 Contact us for an individual offer or to arrange a viewing appointment. Machine available from stock. Delivery, commissioning, and training available upon request.

Condition: ready for operation (used), Technical characteristics Cutting capacity : 5300 x 2200 mm Cutting thickness : 80 mm Horizontal cutting height : 2100 mm Built-in suction device Manual or automatic feed 4 feed speeds Intermediate support along entire length of frame 2 reference stops liftable frame for horizontal cutting Power and Motors Voltage: 380 V Pluging: Three-phased Power: 5,5 Kw Overall dimensions Hodpfx Aju Hb D Aeacsnu

Condition: used, Panel saw STRIEBIG Standard ll plus 6220 A -used- Welded frame with extremely high rigidity, automatically deflecting sliding grid, stable locking of the saw carriage at the top and bottom, retractable riving knife for cut-outs, control panel at eye level, Stiff cutting device ----- Technical data ----- Cutting length: 5,300 mm, Hnsdpjvtrkvsfx Aaceu Cutting height: 2,200 mm, Trimming height: 2,050 mm, Cutting depth: 80 mm, Saw blade Ø: 300 mm, Motor: 4.4 kW, Extraction nozzle Ø: 120/160 mm, space requirement (LxDxH): 6,500x1,800x3,000 mm

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution 2.0 with Software SP2 on Windows XP Lifting table (mm) 2200 x 4300 Twin Pusher Clamps / grippers 7 Max. cutting width (mm) 4250 Max blade projection (mm) 135 Max. clamps opening (mm) 125 Scoring Unit (max saw diameter 200 mm) Main Sawing Unit (max saw diameter 460mm / power (KW 21 / HP 28) Adjustable speed of the saw carriage (m/min) 6 - 150 Hnedpfx Aaeillukeceu Front supporting Air cushion tables (No.) 3 Total power (Kw) 43 (ca.) OPTIONAL: Optimisation software: HPO

Condition: like new (used), functionality: fully functional, Panel Dividing System SCHEER FM 16 – DNC 3100 x 3100 As New – Machine No. 33542 The SCHEER FM 16 is a high-performance, electronically controlled panel dividing saw featuring advanced drive technology and an intuitive control interface. The machine has been fully overhauled and newly painted – its condition is virtually as new. Ideal for precise, automated cutting of wood-based panels in continuous industrial operation. Main Technical Data: • Cutting length: 3100 mm • Cutting depth / Blade projection: 80 mm • Saw motor: 7.0 kW • Scoring motor: 1.1 kW (can be switched off) • Feed speed: 2 – 40 m/min (steplessly adjustable) • Return: Rapid traverse, automatic lowering • Operator interface: SCHEERWIN, graphical, document-oriented (64-bit) on Windows 10 • Drive system: Küenle frequency inverter with Stöber synchronous servo drives incl. absolute encoder – for highest positioning accuracy and dynamic control Features & Highlights: • FM 16-3100 longitudinal cutting saw with hardened guides and automatic forward/reverse travel • HP 5021 material feed table with 6 clamping carriages, servo drive & measuring resolution of 0.05 mm • WP angular pressure system, 2400 mm adjustment range, fully automatic • SP 5000 remnant cutting device for offcuts down to min. 5 mm • HP 5024 miter fence table (1800 x 800 mm), steel angle with Pertinax overlay • HP 5025 workpiece support table (1800 x 800 mm), also with Pertinax overlay • Air cushion system in the front tables, including radial fan Saw blades included: Hnjdpfxeunwk Tj Aacou • KSB 4005 for main saw (ø 305 mm, Z = 60) • KSB 4006 for scorer (ø 200 mm) Condition & Service: • Condition: Overhauled & as new • Functionality: Fully operational • Warranty: 12 months Reliability in Continuous Operation: This machine is in use worldwide – even under extreme conditions. Whether in the dry climates of Africa or the humid environments of Southeast Asia (e.g., Thailand), the SCHEER FM 16 operates reliably in 3-shift systems – 365 days a year – and stands out for its superior precision, stability, and durability. Warranty: We are so confident in the quality and robustness of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excludes electrical supplier components and wear parts.) Flexibility & Customization: We offer various models and equipment options – to fit every budget. We also realize custom tailored solutions based on your individual requirements. 📞 Contact us for an individual offer or to arrange a viewing appointment. Machine available from stock. Delivery, commissioning and training optionally available.

Condition: ready for operation (used), Technical characteristics Cutting dimensions: 4300 x 4400 mm Max. blade projection from work surface (cutting height): 95 mm Main blade max. diameter 320 mm, motor 7.5 kW Scoring blade max. diameter 200 mm, motor 2.2 kW Blade carriage speed adjustable from 5 to 120 m/min Pusher feed up to 60 m/min Automatic lateral alignment device 4 air-cushion unloading tables with rounded profile 9 pneumatic clamps Windows PC-based control Remote-controlled Start cycle pusher, including emergency pusher QUICK CHANGE device (quick blade release) Printer for labelling Power and Motors Hedpfxeucirko Aaconu Voltage: 400 V Pluging: Three-phased Overall dimensions

Condition: new, Holzkraft L invincibile si 3 BLADE OFF sliding table saw BLADE OFF safety system - exhibition machine- ----- Technical specifications ----- Supply voltage: 400 V, Mains frequency: 50 Hz, Scoring motor power: 1.3 kW, Drive motor power: 9.0 kW, Format sliding table length: 3200 mm, Format sliding table width: 360 mm, Table length: 1040 mm, Table width: 630 mm, Cutting width with parallel stop: 1500 mm, Max. cutting width to the left of the sawblade: 3200 mm, Trimming length: 3200 mm, Sawblade inclination: 90 - 45°, Max. cutting height 90° with 400 mm sawblade: 120 mm, Max. cutting height 45° With 400 mm saw blade: 89 mm, Saw blade speed: 3000 - 5000 rpm, Scoring saw blade diameter: 120 mm, Scoring saw blade speed: 8500 rpm, Length approx.: 7250 mm, Width/Depth approx.: 4460 mm, Height approx.: 1770 mm, Net weight approx.: 1307 kg, Extraction nozzle diameter: 100 and 120 mm The BLADE OFF system detects potential hazardous situations early and prevents them by retracting the saw blade into the machine table in a fraction of a second. With the help of sensors, the system is able to distinguish between the workpiece and the operator. An LED light in the saw blade guard indicates with a green light whether the safety system is active. Controlled via the 15" eye-S control console. Connection to the SCM Thundercut (optimizer/sequence control app) is possible. Three longitudinal stops with integrated digital displays. Electrically adjustable parallel stop. Start/stop buttons for the main and scoring saw blades integrated in the sliding carriage. Special guides and an innovative curved grinding system enable the edger carriage to have a fourfold higher load capacity. Ball-bearing telescopic arm ensures greater stability and smoother workpiece guidance. Equipment Two-axis scoring unit with automatic positioning Anodized aluminum sliding table On/off switch on the sliding table for the main and scoring sawblade motors Trimming frame with angle-adjustable aluminum telescopic stop Material roll on the trimming frame Motorized saw parallel stop via control panel Three longitudinal stops with integrated digital displays Eccentric clamp Control of sawblade height, tilt, and parallel stop Pivoting control panel on top Table extension Table extension Sawblade pendulum protection Hjdpfx Aaev Nhg Sjcsnu - new exhibition machine -

Condition: excellent (used), PANEL BEAM SAW WITH REAR LIFTING TABLE Numerical Control Power Concept Software CADmatic 4 Professional Lifting scissor table (mm) 4300 x 2200 Hnsdpfx Aasimr Icscju No. 2 Rear pushers (TWIN PUSHER) Mod. POWER CONCEPT With clamps / grippers RETENTION DEVICE FOR THIN PANELS (Minimum thickness 3 mm) Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 95 (automatic) Scoring Unit (max saw diameter / power) 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) 380 / Kw 13,5 (Max 18) Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 28 OPTION: - Software Cut Rite (optimizzazione/optimisation) SCHNITT PROFI (T) PACKAGE: PRACTIVE - Labels Printer (Option) - Software LABELING PACK BR 3/4/5 (etichette/labels)

Condition: excellent (used), functionality: fully functional, cutting length (max.): 4,200 mm, cutting height with scoring (max.): 70 mm, saw blade diameter: 305 mm, feed rate X-axis: 40 m/min, feed rate Z-axis: 50 m/min, saw drive: 90,000 W, input frequency: 50 Hz, type of input current: three-phase, space requirement length: 4,200 mm, space requirement width: 4,200 mm, Equipment: rotational speed infinitely variable, scorer, Technical Main Data: Cutting length: 4200 mm Cutting height: 70 mm Saw blade diameter: 305 mm Scoring blade diameter: 200 mm Saw motor: 9.0 kW EM 4149 Scorer motor: 1.1 kW (can be switched off) Feed speed: 2–40 m/min (infinitely variable) Rapid return: 50 m/min Table dimensions: 4200 x 4250 mm Operating system: Linux (incl. USB, LAN, remote maintenance) Monitor: 15" flat screen with multifunction keyboard Features & Special Equipment: Automatic forward and return movement of the saw unit with lowering function Externally adjustable scorer—no need to open the safety cover 3-stage cutting height setting LA 4143 7 recesses in the clamp beam for residual cuts (min. 5 mm) Material feed table with servo drive, rack-and-pinion guide, 7 clamping fingers Air cushion tables HP 5025 & HP 5085 with abrasion-resistant “Pertinax” laminate top Hnsdswrn Rbjpfx Aacou OPTIMIN optimization software for automatic cutting plan generation Cutting plan display & graphical workflow overview Remote maintenance via TeamViewer and Remote Desktop Condition & Service: Condition: Very good Functionality: Fully operational Warranty: 12 months CE-compliant and tested for dust emissions (limit < 2 mg/m³) Reliability in Continuous Operation: This machine is used worldwide under extreme conditions. Whether in the dry climate of Africa or in high humidity environments like Southeast Asia (e.g., Thailand): the PA 4137 operates reliably in three-shift systems, 365 days a year—renowned for its exceptional stability and endurance. Warranty: We are so confident in the quality and stability of our machines that we offer a 7-year warranty on the machine frame and guideways. (Electrical supply parts and wear parts excluded.) Flexibility & Customization: We offer various models and equipment variants to suit every budget. Additionally, we provide tailor-made special solutions according to your requirements. Extensions & modifications available upon request 📞 Contact us for a customized quote or to schedule a viewing appointment. Machine available from stock. Delivery, commissioning, and training optionally available.

Condition: ready for operation (used), Technical characteristics Power and Motors Voltage: 400 V Pluging: Three-phased Hodpfx Aoucir Reacsnu Power: 4,4 Kw Overall dimensions Lenght: 6620 mm Width: 3035 mm Height: 1741 mm Weight: 1200 Kg

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Outside Rollers table for pre-loading (mm 5400 x 2200 ca.) - OPTIONAL Lifting table (mm) 4420 x 2200 No. 2 Rear pushers (one with clamps / grippers) No. 9 clamps Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 135 Max clamps opening (mm) 125 Scoring Unit (max saw diameter / power) 200 mm / Kw 1,9 Main Sawing Unit (max saw diameter / power) 480 mm - Kw 27 Hjdpfx Aop N D Atjacsnu Adjustable speed of the saw carriage (m/min) 6 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 36 (ca.)

Condition: ready for operation (used), Technical characteristics Cutting area 4600 x 2070 x 60 mm Hnsdpfx Aasucitujcou Motor 3 kW Blade diameter 250 mm Power and Motors Pluging: Three-phased Power: 3 Kw Overall dimensions

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Lifting table (mm) 4300 x 2200 No. 2 Rear pushers (one with clamps / grippers) No. 8 clamps / grippers Hedpfx Aoq Rffieacsnu Max. cutting width (mm) 4200 Useful stroke of the pushing system (mm) 4200 Max blade projection (mm) 135 Max clamps opening (mm) 125 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 460 mm - Kw 21 Adjustable speed of the saw carriage (m/min) 6 - 150 Front Turning table (rotating at 90°) with air blowing system (mm 2100 x 4100) Total power (Kw) 36 (ca.)

Condition: ready for operation (used), Technical characteristics Cutting dimensions: 3800 x 3800 mm Max. blade projection from work surface (cutting height): 80 mm Main blade max. diameter 320 mm, motor 7.5 kW Scoring blade max. diameter 200 mm, motor 2.2 kW Blade carriage speed adjustable from 5 to 60 m/min Pusher feed up to 40 m/min Automatic lateral alignment device 4 air-cushion unloading tables, dimensions 2000 x 650 mm with rounded profile 6 pneumatic grippers (positioned at 50-360-990-1740-2490-3240 mm) Windows PC-based control 3800 mm pusher stroke Remote Start cycle pusher, including emergency pusher Kit for automatic blade protrusion and controlled presser opening QUICK CHANGE device (quick blade release) DIGISET function Power and Motors Voltage: 380 V Hnedpfx Aajucitheceu Pluging: Three-phased Overall dimensions Weight: 3950 Kg

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Rear Lifting table No. 1 Rear pushers Twin Pusher Hodop R Sdhepfx Aacjnu No. 9 clamps Max. cutting width (mm) 3300 Useful stroke of the pushing system (mm) 3300 Max blade projection (mm) 105 Max clamps opening (mm) 105 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 360 mm - Kw 18 Adjustable speed of the saw carriage (m/min) 5 - 120 Front supporting tables with Air blowing system (N.) 3 Total power (Kw) 21 (ca.)

Condition: ready for operation (used), Technical characteristics Description : SELCO panel saw TYPE EBTR 120 Twin Pusher - 5600 x 2200 mm Numerical panel saw, with two independent automatic loading stations and electromechanical precision lifting table Principal technical characteristics Max cutting length : 5600 mm Max auxiliar pusher course : 4300 mm Max blade height from table level : 122 mm Max clamps opening : 110 mm Lifting table with direct loading : 5600 x 2200 mm Min panel dimension on loading position : 2440 x 1220 mm Min panel thickness from loading table : 10 mm Main blade motor 18,5 kW / 50Hz (25 Hp) Incisor blade motor 2,2 kW / 50 Hz (3 Hp) Brushless motor for blade chariot - Speed 1 -150 m/min Brushless motor for main pusher – Max speed 100 m/min 2 back rollers lateral alignment device with automatic positioning (60 mm to 2200 mm) Turning platform for automatic pre-cuts with 4 pile blocking device Auxiliar pusher TWIN PUSHER Main blade Ø 430 mm Incisor blade Ø 200 mm 4 pneumatical clamps with independent lifting in the transversal area for main pusher (placed at 70, 180, 390, 600 mm from the squaring line) 4 pneumatical clamps with independent lifting in the longitudinal area for main pusher (placed at 2235, 3845, 4650, 5450 mm from the squaring line) 4 pneumatical clamps with independent lifting in the auxiliar pusher (placed at 70, 180, 390, 600 mm from the squaring line) Air cushion rounded work plan 2050 x 850 mm for width optimization placement allowing simultaneous transversal cutting of several bands 4 air cushion tables 4 front transversal pre-aligning devices direct on the pile turning station 2 front and longitudinal pile aligning devices after the rotation Lifting loading table Auxiliar pusher for simultaneous different cutting phases, synchronized with main pusher The 2 pusher are managed by a software, which depending on the cutting instructions, selects the clamps of different pushers so that the insertion in the cutting zone is optimized to realize as many simultaneous cuts as possible The auxiliar pusher has 4 independent clamps and can be equipped with a fifth one (option). Automatic cut panels evacuation Heavy single structure, Industrial chassis, strong stability Cemented and calibrated chariot guiding rails, which supports the main blade and the incisor blade Les 2 pousseurs sont gérés par un logiciel qui, en fonction du schéma de découpe et des phases d'usinage nécessaires, sélectionne les pinces des divers pousseurs à Insérer dans la zone d'usinage afin de réaliser le plus grand nombre possible de cycles de découpe simultanés. Expulsion automatique des panneaux coupés Pressor group Lateral alignment group with 2 independent rollers The turning station has a lifting platform turning the panel pile at 90° which is held in place with blocking devices. The pile is then aligned by the front devices When the pre-cutting cycle is over the main part of the pile is returned again at 90° on the turning station, and the pre-cut part is sent to the transversal cutting operation Hnodpfxjucitnj Aacsu PC Windows XP, 17" screen With cutting profiles, lists, manual cutting, simulation, diagnostic, online help, maintenance, statistics and settings Software and applicancies: "OPTIPLANNING" Pro Version software : Great number of cutting lists (including different types of material) allowing “all at once” optimization "IMPORT FILE" function Editing on external device and import files on machine PC. Automatic management of panel piles and waste material Panel stock and

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL Software CADmatic 4 Professional Lifting scissor table (mm) 3800 x 2200 Rear pushers (N.) 1 With clamps / grippers 7 Turning device (rotating unit) at 90° Hnedpfx Aajh Imvhocou Max. cutting width (mm) 3800 Useful stroke of the pushing system (mm) 3800 Max blade projection (mm) 95 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 380 / Kw 13,5 Adjustable speed of the saw carriage (m/min) 1 - 130 Front supporting tables with Air blowing system (N.) 3 (2160mm x 650mm) Total power (Kw) 28 (ca.)

Condition: ready for operation (used), Technical characteristics Semi-automatic sawing process Maximum main blade diameter: 300 mm Blade rotation speed: 4750 RPM 5.5 kW motor Scorer (VSA) Maximum cutting capacity : Cutting length: 5300 mm Vertical cutting height: 2200 mm Horizontal cutting height: 2100 mm Cutting depth: 80 mm Digital stop Suction connection diameter: 160 mm Power and Motors Voltage: 400 V Pluging: Three-phased Power: 7,5 Kw Motor: 7,5 CV Overall dimensions Lenght: 6765 mm Width: 1813 mm Height: 3015 mm Hodpfx Aaoucirqeconu Weight: 990 Kg

Condition: excellent (used), YZ0105) PANEL SAW WITHOUT REAR LIFTING TABLE Mod. HPP 300/56/56 PROFILINE Numerical Control Power Control POWER TOUCH. Software CADmatic 4 - Professional Rear pushers (N.) 1 - (PACK PREMIUM). With No. 11 clamps / grippers (1 x Power Concept) Max. cutting width (mm) 5600. Useful stroke of the pushing system (mm) 5600 Max. blade projection (mm) 80 Scoring Unit (max. diameter saw / power) mm 180 / Kw 1,5 Main Sawing Unit (max. diameter saw / power) mm 350 / Kw 11 (option Kw 18) Adjustable speed of the saw carriage (m/min) 1 - 150 No. 5 Front supporting tables with Air blowing system (mm 500 x 2810) Labels Printer: PICA II 108 YZ0106) AUTOMATIC REAR STORAGE SYSTEM for PANELS Mod. TFL 211/10/05 Total Space Required (with panel saw) mm 10640 x mm 55660 Mobile upper bridge (on X-axis), with mobile carriage (on Y-axis) and relative vacuum suction cup assembly (mobile on Z-axis) max. speed Mobile upper bridge (on X axis) 110 m/min moving carriage speed (on Y axis) 130 m/min vacuum suction cup group speed (mobile in Z axis) 70 m/min Vacuum suction cup group, 90° rotating Automatic management system TLF (by scanner) of the cut panels (but remaining in the warehouse) minimum dimensions mm 800 x mm 2000 Hjdpfxefg Ewzs Aacenu Stack dimensions Min mm 2600 x mm 800 / Max mm 5600 x mm 2200 Stack height: mm 1000

Condition: ready for operation (used), Technical characteristics Cutting dimensions : 4300 x 4300 mm Max Cutting height : 125 mm Main blade max. diameter 450 mm Motor 13.5 kW Scoring blade max. diameter 150 mm Motor 2.2 kW Blade carriage speed adjustable from : 10 to 125 m/min Pusher feed : 10 to 80 m/min Automatic lateral alignment device 3 air-cushion loading tables 7 pneumatic clamps Windows PC-based control CADmatic software Easy access for maintenance and blade change Quick blade change Suction requirement : 5000 m3/h Power and Motors Voltage: 400 V Hjdpfeucitbex Aacenu Pluging: Three-phased Power: 35 Kw Overall dimensions Lenght: 6900 mm Width: 8200 mm