Used Panel Saw Panel Saw for sale (17,189)

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL V2.1 (Power TOUCH) Software CADmatic 5 (TAPIO READY) Lifting scissor table (mm) 3800 x 2200 Rear pushers (N.) 1 with clamps / grippers (7 + 2) Tsdpfx Akoz Erw Hjijd Max. cutting width (mm) 3800 - Useful stroke of the pushing system (mm) 3800 Max blade projection (mm) 125 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 (ca.) Main Sawing Unit (max saw diameter / power) mm 450 / Kw 28 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 3 (2 x 2160mm x 800mm + 1 x 2810mm x 800mm) Total power (Kw) 34

Condition: good (used), Year of construction: 2017, - Cutting width (mm): 4300 - Cutting depth (mm): 4200 - Cutting height (mm): approx. 80 Tsdpfx Akjy Tm Dcoijd - Power (kW): 16 - Vacuum suction pads: included

Condition: used, Felder KF700S/03 panel saw-milling machine, year of manufacture 2006, good condition, including folding device for feed and tenon hood, 5.5 kW S6, 3200 mm panel table length, 3500,6500,8000,10,000 rpm, 780 kg Tsdpfx Akewzzh Sjijd Prices subject to change, errors, printing and typesetting errors reserved

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-240-06-8502, functionality: fully functional, power: 18 kW (24.47 HP), cutting height (max.): 95 mm, saw blade diameter: 380 mm, cutting length (max.): 4,300 mm, plate width: 2,200 mm, TECHNICAL DETAILS Cutting length: 4,300 mm Panel width: 2,200 mm Saw blade overhang: 95 mm Main saw blade diameter: max. Ø 380 mm Saw carriage feed rate: up to 150 m/min Clamping jaws: 7 pieces Tedszx Anxepfx Akisd MACHINE DETAILS Main saw motor power: 18 kW Scoring saw motor power: 2.2 kW Operating hours: approx. 38,544 h (as of 05.10.2023) EQUIPMENT Automatic rear panel loading system Lift table loading system Lift table Automatic program slider with clamping jaw feed Main saw unit Scoring unit Automatic cutting length and positioning control Angle and back stop Air cushion support tables in the operator area CADmatic operating and optimization environment PICA 108 label printer Roller and transport technology in the rear loading area Safety enclosure with protective fencing Dust extraction connections with machine-side dust extraction ducting

Condition: excellent (used), Year of construction: 2019, Sawblade tiltable 45 ° Length of the rolling table 2500 mm cutting width 1250 mm Motor output 4,0 kW Cutting height 90 mm Speed 4000 / 6000 U/min. Tedpfxsz E Sv Ns Akiod weight of the machine ca. 650 kg

Condition: used, Year of construction: 2004, machine/vehicle number: 0-240-14-3077, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 52 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 125 mm, cutting width (max.): 4,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, saw blade bore: 60 mm, actuation type: electric, rotational speed (max.): 4,500 rpm, rotational speed (min.): 3,800 rpm, total length: 10,216 mm, total width: 7,470 mm, total height: 2,200 mm, overall weight: 15,000 kg, table height: 1,020 mm, Equipment: CE marking, saw blade guard, scorer, For sale is a professional, industrial panel dividing saw from the premium manufacturer HOLZMA, from the high-performance 510 series. The system is of German manufacture ("Made in Germany") and is specifically designed for tear-free and dimensionally accurate cutting of large quantities of panels in an industrial multi-shift operation. As an HPL version, this system features fully automatic material feeding from the rear via a heavy-duty lifting platform, which minimizes cycle times and maximizes operator ergonomics. Technical data according to specification (HPL 510/43/22/L/D/X) Manufacturer: HOLZMA Maschinenbau GmbH Exact model designation: HPL 510 / 43 / 22 / L / D / X Cutting length (code 43): max. 4,300 mm Table width (code 22): max. 2,200 mm Saw blade overhang: 125 mm Main saw blade diameter: max. 450 mm Working height (table height): approx. 1,020 mm (adjustable via leveling feet) Overall height: approx. 2,100 – 2,200 mm (depending on terminal configuration) Control & Clamping System Machine control: Equipped with the proven, IPC-based high-performance control system HOLZMA CADmatic 4. This offers intuitive operation via graphic displays, plain-text error diagnoses, and an optimized cutting sequence visualization. Material clamps: The program slider is equipped as standard with 9 robust, two-finger HOLZMA clamps for gentle and highly precise package fixing. Electrical connection values & energy Operating voltage: 400 V (three-phase / three-phase AC) Mains type: 3~ + N Frequency: 50 Hz Rated current: 52 A Required fuse rating: 63 A, slow-blow Control voltage: 24 V Equipment and functional features Automatic cutting height control: The saw carriage automatically adjusts the overhang of the main saw motor (13.5 kW) and the scoring unit (2.2 kW) to the measured package height. Intelligent pressure beam (pneumatic): Variable opening height for a significant reduction in idle times between cuts. Heavy-duty lifting table feeding ("L"): Robust 4-column feeding system at the rear, designed for smooth handling of heavy panel stacks. Equipment packages ("D" & "X"): Extended machine equipment for optimized material flow, precise package stop, and high-performance cutting cycles. Important logistics and sales information Tjdpszilz Njfx Akisd Condition & Packaging: The machine has already been professionally dismantled and is completely packed, ready for loading. The professional transport securing of all sensitive axes, linear guides, and control components has been carried out in accordance with the manufacturer's specifications. Cost assumption: The loading and transport costs are not included in the purchase price and must be borne entirely by the buyer. Recommendations for local crane and transport services can be requested from us. We will assist with the collection as much as possible.

Condition: as good as new (ex-display), Code: N0506 Brand: FELDER - AUSTRIA Model: K 700 S – CE Standard Tjdpfx Akszqd Htjied Precision panel saw with tilting blade and scoring unit - CE Standard Technical data: Tilting guide system “Easy-Glide” “Power-Drive” for automatic adjustment of blade height and tilt Carriage length 3200 mm Blade inclination 90/45° Cutting width 1250 mm Max blade diameter315 mm Bore 30 Rpm 4800 Max cutting height at 90°104 mm Max cutting height at 45° 72,7 mm Adjustable scoring unit - blade diameter 120 mm – Bore 20 rpm 8600 Main blade motor 7,5 Hp Tilting guide on fence 0,45° Support roller on fence Dust extraction connection diameter 120 mm Upper blade dust extraction diameter 50 mm Overall dimensions of assembled machine mm 3400 x 3400 x 1050 h Weight kg 740

Condition: good (used), Code: 0332 Brand: SALVADOR Model: SEL/600 - CE Standard Longitudinal panel saw for postformed strips and finished components with roller feed and unloader (SPLITTER) – CE Standard Technical data: Cutting width/REF mm 10–650 Cutting thickness mm 10-60 Crosscutting saw blade diameter mm 350 Scoring blade diameter mm 350 Crosscutting motor power Hp 5,5 Scoring motor power Hp 2 Carriage feed speed mt/min 15 Suction port diameter n° 2 mm 160 each Work surface height 900 mm Workpiece feed right/left The panel saw consists of a cutting unit composed by 2 aligned blades. One blade scores the material and the other performs the cut Idler roller feeder width 800 mm Idler roller feeder length 3000 mm Roller diameter 80 mm Idler roller feeder width 800 mm Idler roller feeder length 3000 mm Tedpfx Akjyu Uk Sjied Stop guides Compressed air 6-8 atm Weight kg 1900

Condition: used, Year of construction: 2018, max. cutting width: 5200 mm max. cutting height: 2200 mm saw blade diameter: 250 mm max. processing thickness: 60 mm saw blade arbor: 30 mm lower support: plastic Todpfez Aibgjx Akied material support: plastic strips, retracting measuring system: digital display swiveling saw head: manual saw feed: manual mounting: free-standing extraction: external locking of saw beam: manual weight approx.: 1200 kg motor power: 4.2 kW Location: Nattheim

Condition: good (used), Code: 0177 Brand: NARDELLO - ITALY Model: SOTOS - CE Standard Tjdpfsw Dfnhjx Akijd Cross cutting panel saw for postforming tops, edged and non-edged panels. Suitable for companies producing furniture, kitchens, bathroom furniture, furnishings, panels, and various - CE Standard Blade carriage unit: The blade carriage slides on linear guides with spheres blow-by and it is controlled by a brushless motor. Scoring unit group, whih is controlled by a brushless motor, allows to cut postformed edges and also special workings, which increase productivity of the machine. Pliers group and/or rear positioner are controlled by brushless motor and slide on linear guides with spheres blow-by. Cycles check-out is made by Numerical Control. Technical characteristics: Cutting width 1500 mm Cutting height 100 mm Main blade motor 7,5 Hp (5,5 Kw) Rotating speed 4000 Main blade diameter 300-400 mm Scoring blade motor 2,5 Hp (1.8 Kw) Scoring unit rotating speed 5000 rpm Scoring unit blade diameter 220-300 mm Saw carriage forward speed 0-60 m/1' Saw carriage return speed 40-70 m/1' Positioner speed 0-25 m/1' Positioner return speed 40-60 m/1' Weight 2000 kg

Condition: not inspected (used), Undercut saw, manufacturer: Kaltenbach, type: KKS 400 KCH, serial number: 117166, year of manufacture: 1994, side guide, roller feed: 7,000 x 350 mm, saw blade diameter: 400 mm, hydraulic clamping system, coolant system. Todpfx Aez R Nctskisd

Condition: used, Year of construction: 2016, Angular panel saw with automatic pre-loading and twin pusher system for optimised cutting Osi Plus Numerical Control Os Labelling labelling machine with on-board graphic labelling with part drawings Label printing management software Optiplanning Cutting Optimizer Cutting length mm 4500 Cutting width mm 2200 Blade projection 95 mm Motorized rollers for lateral loading on lifting table 4500 x 2200 mm. The translation speed is 10.8 m\min (50hz) - 13.1 m\min (60hz) Automatic recognition of the lost panel (martyr panel) based on the thickness specified in the machine data Low battery stop Automatic side loading buffer. Includes: perimeter nets, double photocell, push-button panel, predisposition electric for the two motorized pre-rollers and the amplification of 4 rollers in place of the fork passages in the pre- intermediate roller conveyor Pre-loading side roller conveyor dim 3800 x 2200 mm with motorized rollers (height from the ground 325 mm) Inertial conveyor for conveying longitudinal trimmings for angular systems 4500 mm (total length 7295 mm) 3000 mm extension to the inertial conveyor to also convey transverse trimmings Long chute for manual conveying of cross-cut trimmings to the centralized inertial conveyor 2050 x 850 mm air curtain discharge table with wheels at the front Air generator up to 6 floors with air curtain MULTIPUSHER 2.4 system with automatic lubrication Todpfsuc Idxjx Akijd Additional mobile lateral aligner on the transverse plane. The presence of this device allows to reduce from 1830 to 1220 mm is the minimum length of the panels that must be sent for cross-sectioning. Automatic blade shaft bending detection device for angular systems (longitudinal and transversal) consisting of a sensor that detects the deflection directly on the blade shaft and a device that detects the revolutions blade directly on the spindle. Remote cycle start button panel Automatic panel loading via rear lifting table Automatic double aligner with pneumatic cylinders Additional movable lateral aligner on the transverse plane Main blade, max diameter mm, KW 15 Scoring blade, max diameter mm, KW 2.2 Blade carriage speed 1-140 m/min. – BRUSHLESS motors Longitudinal pusher carriage speed 90 m/min. Cross pusher carriage speed 135 m/min. Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the transverse carriage (8 fixed grippers + 2 on the multi-push system) Cutting system for thin panels

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: AE/034421, functionality: fully functional, cutting height (max.): 67 mm, cutting width (max.): 2,200 mm, saw blade diameter: 320 mm, cutting length (max.): 4,150 mm, spindle speed (max.): 5,000 rpm, TECHNICAL DETAILS Cutting length max.: 4,150 mm Cutting width max.: 2,200 mm Cutting height max.: 67 mm Saw blade diameter max.: 320 mm Saw blade bore diameter: 80 mm Spindle speed min.: 1,000 rpm Spindle speed max.: 5,000 rpm MACHINE DETAILS Voltage: 400 V Current consumption: 21 A Fuse: 32 A Power: 8.4 kW Power, main motor: 9.0 kW Total weight: 4,000 kg Shipping packages: 4 pcs. EQUIPMENT Software Wincut 12.2.9 Documentation CE marking The following data is taken from the machine's data sheet (see last image): TECHNICAL DETAILS Sawing unit Diameter of scoring saw blade: min. 160 mm / max. 280 mm Speed of scoring saw blade: min. 1,600 rpm / max. 7,000 rpm Tsdpfjzulxfox Akijd Cutting length: min. 1,600 mm / max. 4,500 mm Feed rate of saw blade: min. 0 m/min / max. 100 m/min Drive power Power, main saw motor: min. 5.5 kW / max. 8 kW Power, scoring saw motor: min. 0.75 kW / max. 2.2 kW Power, saw blade feed motor: min. 0.75 kW / max. 0.75 kW Power, feed/return motor of the carriage: min. 0.55 kW / max. 0.75 kW Carriage Carriage travel: max. 4,600 mm Feed rate of carriage: max. 25 m/min Return speed of carriage: max. 70 m/min

Condition: used, Year of construction: 2011, - max. panel width 4500 mm - max. panel length 2200 mm - max. saw blade projection 127 mm - main saw 18.5 kW Todpfx Ajzuyxmskiod - scoring saw 2.0 kW - with lifting table used panel dividing saw Manufacturer: Selco Type: WNTR 730 Year of manufacture 2011 Technical data: Max. panel width 4500 mm Max. panel length 2200 mm Max. saw blade projection 127 mm with lifting table 9 grippers on the sliding fence Flexible grippers for positioning via NC Max. feed rate 130 m/min 1 saw unit with positioning via NC max. tool diameter 470 mm Motor power 18.5 kW Scoring unit max. blade diameter 200 mm Motor power 2 kW Quick-change device QUICK CHANGE SYSTEM Max. feed rate 185 m/min Machine programming software OSI Barcode label printer Barcode scanner Total installed power 44 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2011, Panel dividing saw Manufacturer: Selco / Systraplan Type: WNTR 710 Year of manufacture: 2011 with SYSTRAPLAN supporting table Technical data Todpfezuyxyex Akisd Cutting length: 4300 mm Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2001, I sell the panel beam saw BIESSE SELCO EB70. Year 2001. Cutting size 3200x3100mm. Cutting height 55mm. Main motor 7,5kW Scoring motor 2,2kW Todpjz Ii Arsfx Akiod Total area covered W.5422mm x D.6488mm Gripper with pneumatic regulation Side alignment top roller with pneumatic stroke. Optimising software included. Very good condition. Available immediately.

Condition: used, Year of construction: 2008, Panel dividing saw Manufacturer: Holzma Type: HPP 350/43/38 Year of manufacture: 2008 Technical data - Control system: CADmatic 4 - Optimization program: CAD-Plan 4 - Saw blade overhang: 80 mm Tjdjzuy N Ejpfx Akijd - Saw carriage feed rate forward/backward: 1-150 m/min / 150 m/min - Feed rate of the program cut forward/backward: 90 m/min / 90 m/min - Main saw motor: 13.5 kW - Scoring saw motor: 2.2 kW - Working height: 920 mm - Main saw blade: 350 x 4.4 x 60 mm - Scoring saw blade: 180 x 4.4 - 5.4 x 45 mm - Cutting length: 4300 mm - Cutting width: 3700 mm - Label printer Pica 108 - Processing package for gypsum fiberboards - Annual maintenance and inspection by Homag - New PC in 2021 (Win10) and updated machine control software and CadLink Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, machine/vehicle number: 008514, Max. panel width: 4250 mm Todpsy Edn Aofx Akiod Max. panel length: 4300 mm Main saw blade projection: 95 mm No of Grippers: 7 Second flexible pusher: yes

Condition: used, Offered is a sliding table saw with an aluminum sliding table. Cutting guide: Sliding table for rip cuts and crosscuts. Work surface: Machine table with additional table width extension. Equipped with an aluminum sliding table, adjustable rip fence, crosscut fence with flip stop, large support arm, saw blade guard with dust extraction port and dust extraction hoses. Inspection possible by arrangement. Todpfxs Afplns Akied

Condition: used, machine/vehicle number: 008177, Max. panel width: 4300 mm Max. panel length: 4300 mm Main saw blade projection: 125 mm Todpfjx A Tamox Akied No of Grippers: 7

Condition: excellent (used), functionality: fully functional, Panel saw Maximum cutting size: 5300 × 2240 × 80 mm Maximum cutting depth: 80 mm Saw motor power: 5.5 kW (7.5 HP) Saw blade diameter: 300 mm Tedpfx Akezkh R Noisd Saw blade mounting hole diameter: 30 mm Acoustic pressure level at the workstation (LpA): 83 dB Blade speed: 4800 rpm Number of dust extraction nozzles: 1 × Ø 140 mm Compressed air connection: 6–10 bar Connected power: 7.5 kW Electrical supply: 3 × 400 V / 50 Hz Overall machine dimensions: 6620 × 3010 × 1742 mm Saw weight: 1100 kg

Condition: excellent (used), Year of construction: 2018, used horizontal panel dividing saw Manufacturer: Homag Type: Sawteq B-130 (Optimat HPP130/32/32) Year of manufacture: 2018 Cutting length 3200 mm Cutting width (program slider travel) 3100 mm Roller rail 1 * element, 10-track + 4 single-track Clamps 5 pieces Air cushion table 3 * 1800 x 500 Central blower 1 piece Tsdpfx Aez R Sgzskijd Technical data: Saw blade overhang 60 mm Saw carriage feed: forward 1-60 m/min, reverse constant 60 m/min Automatic cutting height; pressure beam height control Angular backstop, min. pressure width 0 mm; max. pressure width entire cutting length Main saw motor 5.5 kW with pneumatic saw lift Scoring saw motor 1.1 kW, motorized saw lift, electric adjustment Operating voltage 400 V (+10%/-5%) / 50 Hz Electrical connection value: 10 kW Labeling program with label printer PICA II 103 Power Control CADmatic 4 control system Optimization program CAD-Plan 4 "Single Saw" on the machine

Condition: excellent (used), Year of construction: 2019, Panel dividing saw HOMAG SAWTEQ B-200 / HPP 200/38/32, manufactured in 2019. Cutting length 3,800 mm; saw blade overhang 65 mm; scoring saw; intelliGuide Basic; three air cushion tables; label printer. Collection possible from December 15th. Earlier collection is only possible by arrangement. Tjdpfe Adubfjx Akijd Inspection by appointment. Dismantling, loading, and transport will be arranged. Price on request. Contact: DS-Maschinen – Owner David Schulz.

Condition: ready for operation (used), Year of construction: 2007, Main motor (kW): 27 Infeed device Tsdpfxszgwpge Akied Saw length (mm): 3300 Saw width (mm): 3300 Panel thickness (mm): 40 All specifications are manufacturer’s data.

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: AB00041292, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 950 kg, Equipment: CE marking, documentation/manual, saw blade guard, Circular saw with a tilting saw blade, compliant with European safety standards and equipped with a motor braking system. Features: Independently driven scoring unit Tjdpfez Rmu Esx Akiod Ready 3 UP Plus version (3 axes), suitable for CE and USA/Canada Sliding carriage of 3200 mm Miter gauge with digital display of the position of the 2 stops