Used Pad Printer for sale (3,855)

Condition: excellent (used), Eos EOS P 396 | PSW 3.8 – Industrial 3D Printer (Laser Sintering System, SLS, CO₂ Laser) The machine has been serviced regularly (last service: 08/2024). It has exclusively processed PA11 (EOS PA1101). The system is offered including accessories: 1 x build box, docking station, multibox with cooler Operating hours: 5,962.3 h "The printer has been equipped with a new IntelliScan III scanner including a laser deflection head and has been thoroughly inspected." For sale is an EOS P 396 with PSW 3.8, a high-precision industrial system for additive manufacturing (Selective Laser Sintering, SLS). The system is suitable for the production of complex plastic components for both series and prototype manufacturing. Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set: PA 2200 Balance Cooling system (termotek): Cooling capacity: 1,400 W at 20°C water / 18°C process water Pump capacity: 5 l/min at 3.5 bar Electrical power: 230 V, 50/60 Hz, 7.5 A Refrigerant: R134a (max. charge: 420 g) Multibox is a typical EOS accessory for powder handling, used for transporting and interim storage of material. Technical Data: Laser and Optics: Laser type: CO₂ laser Rated power: 70 W Wavelength: 10.55 – 10.63 μm Laser safety class: 1 (closed) / 4 (open) Focused beam diameter: approx. 0.6 mm Heated F-theta lens, focal length: 500 mm High-speed galvanometer scanner with temperature compensation Exposure area: 350 × 350 mm Beam deflection speed: max. 6 m/s Mechanics & Build Volume: Build chamber: 350 × 350 × 620 mm X-axis (coater): Travel 690 mm, speed max. 200 mm/s Z-axis (build platform): Travel 650 mm, speed max. 6 mm/s, resolution 0.01 mm Powder dosing via grooved roller Heating Systems: Process chamber heating: 3.0 kW, infrared twin tube radiator with pyrometer control Take-off chamber heating: 1.6 kW, resistance heater coil with separate temperature measurement Control & Operation: Process computer with Windows 7 OS 15.1" TFT display, membrane keypad & mouse Ethernet network connection Other: Noise emission: < 70 dB(A) Electrical Data: Voltage: 400 V 3~/N/PE Frequency: 50 / 60 Hz Rated power: 10 kW Rated short-circuit current: 5 kA Current draw (full load): 16.0 A Line protection: 32 A Total weight: approx. 1,400 kg Condition: used Kdedpfoxw Uyqsx Ag Usg Scope of delivery: (see picture) Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek) Multibox (Specifications and information are subject to change and correction!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), German RepRap 3D Printer Here we offer you a German RepRap 3D printer. Kodpfxsivpdwe Ag Uodg The X1000 from German RepRap is a large capacity 3D printer that produces industrial quality objects. 3D Printer Datasheet: German RepRap X1000 Manufacturer: German RepRap Country: n.a. Material: Standards (PLA, ABS, PP ...) Technology: Fusion layering (FDM/FFF) Pre-assembled: n.a. Dimension: 1725 × 1500 × 1320 mm (67.91 × 59.06 × 51.97 in.) Weight: 400 kg / 881.8 lbs Nozzle diameter: 0.4 / 0.6 mm ( in.) Minimum print density: n.a. Print speed 150 mm/s mm/sec Precision XY: XY : 20 µm µm Max. Volume: 1000 × 800 × 600 mm File format: n.a. Software: Simplify3D Connectivity: Wi-Fi OS compatibility: n.a. Power: n.a. Other features: Touchscreen Type: German RepRap X1000 Condition: used / used Scope of delivery: (See pictures) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), SLM Solutions Type: SLM 125 Water-air cooler Build space (L x W x H): 125 x 125 x 125 mm (minus substrate plate height) Build space reduction (L x W x H): 50 x 50 x 50 mm (minus substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 µm - 75 µm, 1 µm steps Min. structure size 140 µm Focus diameter 70 µm - 100 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 0.6 l/min (argon) Average protective gas consumption in the flooding process: 70 l/min (argon) Electrical connection / Power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Kodpfx Agou Ebufs Usdg Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / including powder): 700 kg, 750 kg with Pu Was operated with molybdenum! Laser hours: 2383 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Selective DMG Mori Type: LASERTEC 30 SLM Selective Laser Melting Machine Technical Specifications: Build volume: 300 x 300 x 300 mm Layer thickness: 20-100 µm Materials: Tool steel, stainless steel, cobalt-chrome alloys, titanium, aluminum, precious metal alloys, Inconel Laser: Ytterbium fiber laser Kedju Ebv Aepfx Ag Uodg Laser type: YLR-600-WC Dimensions: 448 x 580 x 132 mm Weight: 40 kg Cooling: Water Central wavelength range: 1070 ±10 nm Modulation frequency: 0-50 kHz Average power, max. 600 W Power adjustability: 10-100% Beam parameter: 0.37 mm x mrad Condition: used Scope of delivery: (See picture) (Subject to change and error in technical specifications and details!) We are happy to answer further questions by phone.

Condition: used, 3DGENCE Type: Industry F420 Technical data: Working area: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900mm x 950mm x 1950mm Printing system: dual extruder equipped with cleaning system + Interchangeable nozzle head Filament diameter: 1.75 mm Printing material: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic changing system Print head temperature (max.): 500°C Print bed temperature (max.): 180°C Work chamber temperature (max.): 180°C (active heating) Kdedownpbgspfx Ag Ujg Filament chamber temperature (max.): 50°C Condition: used Scope of delivery: (see pictures) Weight: 350 kg (Changes and errors in the technical data, specifications reserved!) We would be happy to answer further questions by phone. Written orders possible by email or fax

Condition: excellent (used), Kortho GraphicJet 18P InkJet printing system High-resolution inkjet printer with many possibilities. For coding and marking absorbent materials such as folding boxes, trays, bags, sacks or individual products up to 8 lines plus graphics and barcodes. Character height from 1.5 to 18 mm Product benefits at a glance * High-resolution inkjet printing: 128 individually addressable dots per print head. * Completely free print image design within the text area. * Combination of text, logos and barcodes in one print image. * Kortho Image Generating Software for logical print image creation on the pc. * Unique infrared remote control: no cable connection required. * Separate, refillable ink tank with industry-standard volume. * Clean, easy ink refill during operation. * Very low cost per print. Print costs can be calculated by program. * Maintenance reduced to a minimum. * No flushing with solvent required. The advantages of the Kortho GraphicJet 18P The compact print head and the separate ink tank, in conjunction with a variable standard mounting bracket, enable operation at almost any position in the production process. Regardless of whether a carton is to be labeled from above or a tray or paper bag from the side. A print image with a format of up to 18 x 500 mm can be designed completely freely for each print head. A print image can contain texts of up to eight lines, logos, time, date, barcodes, batch numbers and shift codes in different display variants. The font height that can be displayed is 1.5 mm to 18 mm per line. Texts and graphic elements can appear both horizontally and vertically in a printed image. Automatic numbering Lot numbers, batch numbering, pallet numbering and other variables in different versions. Several number codes are possible in one print image. Automatic date coding Best-before date, production date and other variables in different versions, such as day of the year, day of the week, week of the year, in Arabic format. Several number codes are possible in one print image. A date can also be entered by the operator directly on the control unit. Automatic time coding The time is taken from the control unit's clock chip. Different versions of the display are possible. Several time codes can appear in one print image. Automatic shift codes Up to 25 shift codes can be defined over a maximum of 7 days. Several shift codes are possible in one print image. Kdodpsq Tp Srsfx Ag Ueg Graphic images Logos can be imported as black and white bitmaps via the KIGS software. Several images are possible within one print image (depending on the format size). Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Kortho Graphicjet X-18 inkjet printer High-resolution inkjet printer for absorbent and smooth surfaces The most advanced hi-res inkjet for 18mm high prints Launched in 2015, the X-Series Graphicjets are Kortho's latest and most advanced hi-res inkjet printers. Machine-wise, the X-Series printers with their capillary ink system are a further development of our proven 18P. However, the X-Series printers have a Windows operating system. In addition, its Nicelabel Windows driver makes it possible for this printer to print directly from any Windows software or ERP system. The X-Series has an 8″ color touch screen with integrated label management and design functions. This eliminates the need for external devices or connections during standalone operation. Additionally, this printer can print at speeds of up to 60 meters per minute, up to 120 m/min at lower resolution. Features of the Kortho Graphicjet X-18 Inkjet Print area of 18 x 1000 mm Resolution of 185 DPI Print speed of up to 60 meters per minute (at full resolution), up to 120 m/min at lower resolution Coding on cardboard (boxes), paper and many other absorbent materials Ksdpfetpwt Isx Ag Usdg A compact print head housing and 60 cm supply cable ensure easy installation Its non-pressurized capillary ink system ensures that this printer is not affected by changing environmental conditions Oil-based inks and mineral oil-free inks available User-friendly 20 cm TFT touch screen in any language you want Starts up within seconds Extensive graphics, text and barcode functions Windows-based operating system Equipped with Windows driver for network integration Equipped with Ethernet connection and USB ports 100% NiceLabel compatible On-screen label design and management software (no external device required) Low consumption costs and low maintenance Longest service life and reliability on the market Made from the best materials (such as stainless steel) Serialization option via variable printing and bidirectional communication with ERP system CE certified Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Bluhm Systeme Markoprint Integra One Printing System Markoprint Integra One with HP cartridge technology. With its compact dimensions of 188 x 80 x 98 mm, the system can be easily installed in or on production lines. The printhead achieves top speeds of more than 180 m/min and has an IP65 protection rating. The printing system is equipped with a display for data entry, as well as for changing and reviewing system settings. Operators can review or change variable print information and settings directly on-site using the user-friendly display. Intuitive control is via an i-Logic button. Maintenance status can also be displayed on the display. The Integra One is particularly compact, measuring 188 x 80 x 98 mm, and was specifically designed for system integration. Kdodpfjq Tp Rmsx Ag Ueg Smart Cartridge Monitoring The intelligent SmartCard cartridge monitoring system identifies the current ink type and automatically sets the appropriate ink parameters. The chip records and stores the current ink level and therefore detects opened cartridges. Thanks to the Click'n Print cartridge holder, changing ink is quick and easy. Maximum print speed (300 dpi horizontal) up to 180 m/min depending on configuration Horizontal print resolution adjustable from 50 to 900 dpi Vertical print resolution 300 or 600 dpi depending on configuration Maximum print height 12.5 mm Technology HP MK3 Authentication SmartCard Text field yes Counter yes (depending on configuration) Time yes (depending on configuration) Date field/date offset yes (depending on configuration) Logo yes Variable input yes (depending on configuration) Action fields yes (depending on configuration) 1D code/2D code yes (depending on configuration) Data transfer via USB stick yes (USB-C) Ethernet yes (depending on configuration) Wi-Fi optional EIA232 yes Password levels yes (depending on configuration) Configurable inputs and outputs yes (depending on configuration) You can find more items - new and used - in our shop! International shipping costs on request!

Condition: not inspected (used), Dear Sir or Madam Ksdpowktwkjfx Ag Ujdg We hereby offer you the following device for sale: Keyence Agilista 3200W 3D printer. The machine is sold with the equipment documented in the photos and recorded in the advert text. Location: 40764 Langenfeld ATTENTION: The device comes from an insolvency. We are auctioning it for the highest bid on behalf of the creditor/bank. This is a closed auction. We do not give any information about the current highest bid. Your bid becomes binding upon receipt by e-mail. Please inform us of your binding bid by 07.12.2025 at 10 am. You will be informed of the outcome of the auction within 72 hours of the end of the auction.

Condition: excellent (used), Compact tensioner Hekus Kjdpfx Agetxhxwo Uodg Base area 60 x 50 mm 4 pieces 100 mm high 3 pieces 50 mm high

Condition: good (used), Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, accessories -Execution: -interlocking in a stair-like pattern -for use in pairs -individual documents can be used in conjunction with clamping iron no. 372000 -Support height: 22 to 208 mm. -Material: -Heated steel: painted. -Scope of delivery: -includes 2x wooden boxes Kdsdpfx Ajcti Dieg Ujg -Weight: 12 kg

Condition: good (used), clamping device, clamping claws, deep clamping jaws, clamping base, clamping tool, step claws, low clamp, clamping iron, step block -Step block: clamping pad for clamping tool, 2 pieces -Clamping width: 50 mm -Price/Delivery: complete Kedpfeu Aifgsx Ag Ujdg -Dimensions: 120/60/H140 mm -Weight: 1.9 kg/piece

Year of construction: 2015, condition: excellent (used), Octopus Automatic Check Weigher with Printer Labeller Weight range 40grams to max 6kg Fully stainless steel With VWS Printer labeller, Type LPX R Blow XL, Model PX4 / 300 Currently running a 100mm wide label Dimensions 1700mm long, belt width 300mm Kdodpon R Syijfx Ag Usg Video of machine in use avilable on request In excellent condition

Condition: ready for operation (used), Year of construction: 2021, total height: 1,950 mm, overall weight: 350 kg, number of axes: 3, General Data Measurements width 940 mm Measurements depth 900 mm Measurements height 1950 mm Machine weight 350 kg Main Drive Number of axis 3 Kdjdpfex D Sqmex Ag Ujg Additional Equipment Double extrusion head per print module, equipped with a cleaning system for the print head to print complex geometry with soluble support. 3 print modules with different temperature specifications specially developed for the different materials. This 3-axis 3DGence Industry F420 was manufactured in 2021, featuring Fused Filament Fabrication with a dual extrusion head and a cleaning system for complex geometries. It includes three print modules for various materials, a 380 × 380 × 420 mm working chamber, and temperatures up to 500°C for the print head. If you are looking to get high-quality 3D printing capabilities, consider the 3DGence Industry F420 machine we have for sale. Contact us for more information about this machine. Application Types 3D Printing

Condition: ready for operation (used), Mitsubishi K7PRFE Printer Interface Unit, serial no. according to photo, with connection cable, in leatherette bag, used, normal traces of use, 100% functional, scope of delivery according to photos Kodpfoi Eb Nhjx Ag Uedg

Year of construction: 2026, condition: new, new PMH filament line extruder 30 mm - 28 l/d with noozle for 3D-filament with cooling tank with blow-up system for adhesive water with Laser control system (option) with puller Kjdpfx Agoch Sfqo Uedg with filament accumulator (option) with winder and traverse guide MADE in GERMANY

Condition: used, Year of construction: 2008, Zebra110pax4 label printer and pneumatic stamp. RA2315 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status display and buttons on printer, manual control panel on the side and control via PLC I/O Print type: Thermal transfer printing or direct thermal printing selectable Interfaces: Ethernet/control cable Print media: Standard media, tags and RFID media (reading and encoding of RFIF labels) Current label size: 90x36mm, applicator is designed for this size Kdodpfeux Sfzsx Ag Usg Label length min: 12.7mm Print media width: 16-114mm Ribbon width: 25.4-107mm Ribbon length max: 900m Roll size core diameter: 25.4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) Dot size: 0.125mm x 0.125mm Print speed: 12 inches/second Base area: 700x700mm, with 100mm protruding control panel/compressed air maintenance unit Applicator height: 800mm lower edge Print speed: approx. 2 seconds/label with application Electrical circuit diagram enclosed Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany

Condition: used, Legi-Air 4040Z with Zebra110pax4 label printer and pneumatic stamp. RA1933 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status indicator and buttons Print type: thermal transfer printing or direct thermal printing selectable Interfaces: RS 232 Seriel, IEEE 1284 Print media: standard media, tags and RFID media (reading and coding of RFIF labels) label length min: 12,7mm width print media: 16-114mm ribbon width: 25,4-107mm Ribbon length max: 900m Roll size diameter core: 25,4mm Roll size maximum diameter: 101.6mm Kdsdpfek Abllox Ag Uog Resolution: 203 dots/inch (8 dots/mm) dot size 0,125mm x 0,125mm Print speed: 12 inch/second

Condition: used, Year of construction: 1993, Technical details: height of printing: - height of printing: - connection electric: 100-240 V pneumatically operated: min./max.: 4,8/6,9 bar Kdsdpfxsu Nu Tpj Ag Ueg The printer is a lower case inkjet printer for contactless mark products. Application: for commercial marking and labeling purposes. The device can print on any surface, any structure, any profile and on any form. (according to the manufacturer) Equipped with two control units. other features: - dimension height: 3.3 - 8.6mm and 1/8 "- 1/3"; Points of reference: 62 digits; - operation is via control unit - equipment with control unit 170i and accessories Control unit 178i dimensions: - machine: L: 600 x W: 650 x H: 1800mm - control units: L: 203 x W: 508 x H: 610mm Sale as is. Without test run! i.D. *

Year of construction: 2019, condition: used, Technical details: control: Sinterit Studio 2019 Open voltage: 220/50 V / Hz total power requirement: 1,0 (max. 1,8) kW weight of the machine approx.: 90 kg dimensions: 690 x 510 x 900 mm SLS Laser System IR Laser Diode 5 (W) Max. Print distance diagonal: 316mm Flexa/TPE - high accuracy max. print volume 110 x150 x 250mm Kedpfx Aou N Auujg Ujdg PA - high accuracy max. print volume 90 x130 x 230mm X/Y accuracy: 0.05mm table size/working space: 150 x 200 x 260mm built-in nitrogen chamber nitrogen consumption: 0,48 m³/h heating system with max. chamber temperature: 200°C Accessories: Glass plate (Laser Protective Glass) 1x USB (software accessible), Software Sinterit Studio 2019 open, supported formats STL,OBJ,3DS,FBX,DAE,3MF, operating system MS Windows Light source (Set of Infrared heaters 24V) various bottles with polyamide powder div. small parts *

Condition: used, Year of construction: 2014, working width 250 mm working length 250 mm work height max. 280 mm laser capacity in Watt 400 Rofin travel -z axis 10 - 1000 mm/s positioning accuracy +/- 0,1 mm repeating accuracy +/- 3,5 my capacity 6,8 kVA Required air-pressure 6-10 bar Kedpfewdiwyex Ag Ujdg Type of gas Schutzgas Stickstoff 5 bar dimensions of the machine ca. 5,9 x 4,2 x 3 m range L-W-H 2,44 x 1,63 x 2,36 m weight 2 300 kg Little used Concept Laser M2 Cusing system for processing reactive and non- reactive powder materials. Design of process chamber, handling station, powder suction according to ATEX Directive II for flammable substances. Materials: steel, stainless steel + aluminum. Supplementing titanium against additional payment possible. Dynamic coating system with 3 different wiper blades. Peripherals and accessories: Rofin laser source - photo 4 Nitrogen generator (in the other room, photo 7) External filter including fan and operating hours counter: 10464 - Photo 8. Storage container for the filter inserts. Transport device with lift for powder loading - photo 9. 6 stainless steel powder charging containers. Pneum. Vibrating sieve for attachment to the powder container. Powder container rack for swap containers, dimensions 1.15 x 0.17 x 1.22 m - photo 10. Orange wet vacuum cleaner - photo 8. Selling due to production change. Price at the time € 1/2 mio! Vid 1: Machine outside, Vid 2: Machining - created on this machine, Vid 3: Slide show Workpiece creation on this machine + accessories. Machine dealer with own stock of 1600 m².

Condition: like new (used), Year of construction: 2021, operating hours: 500 h, 1050 including holder for 2 heads The Thermo-Inkjet 1050 was designed as a low-maintenance, easy-to-use industrial printer and produces high-resolution text, logos and graphics as well as 100% error-free readable barcodes. Kodpfx Agjrz N Imj Ujdg

Condition: like new (used), functionality: fully functional, machine/vehicle number: D31369, Year of construction: 2019, operating hours: 73 h, total length: 864 mm, total height: 1,626 mm, total width: 711 mm, type of input current: AC, overall weight: 227 kg, input voltage: 230 V, input current: 7 A, input frequency: 50 Hz, table width: 355 mm, table length: 254 mm, construction height: 355 mm, --- RARE OPPORTUNITY --- Stratasys F370 for sale due to business closure. Barely used, with only 70 operating hours—essentially in like-new condition. This printer is ideal as an addition to existing machine parks or as a high-quality all-rounder for newcomers to 3D printing. The printer is currently packaged and in storage. It was inspected and serviced by the manufacturer’s authorized distributor prior to proper decommissioning. The most recent exported cfg file can be provided upon request. Kdodpoxgh U Tsfx Ag Usg The F370 was designed with user-friendliness in mind, offering a powerful and virtually maintenance-free 3D printing system that is quick to learn and easy to operate. It supports a wide selection of materials for various 3D printing applications, typically including prototyping, the production of tools and fixtures, as well as low-volume manufacturing of end-use parts. Its compact footprint and quiet, safe operation—without requiring special arrangements—make the F370 ideal for workshops, offices, or even classroom environments. With soluble support material, even complex geometries with internal cavities can be created—uncommon in this class of printers. The four easily accessible material spool bays on the front (2x model & 2x support) allow for quick material changes. The complete package is rounded off by the GrabCAD Print and Insight design-to-print software applications, automatic calibration, an integrated camera for remote print job monitoring from your computer, and an intuitive front-panel interface.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, DMG MORI DMG MORI LASERTEC 30 SLM (2nd Gen.) Metal 3D Printer 600–1000 W Fiber Laser For sale is a DMG MORI LASERTEC 30 SLM 2nd Generation, a professional industrial system designed for metal 3D printing using the Selective Laser Melting (SLM) process. This machine is ideal for highly precise functional components, prototypes, lightweight structures, and small-batch production in industry, aerospace, medical technology, and toolmaking. The system has been professionally operated and maintained, and is in excellent condition. Machine Specifications: Model: LASERTEC 30 SLM 2nd Gen. Year of manufacture: 2019 Weight: approx. 1300 kg Dimensions: approx. 1900 × 1100 × 2000 mm Build volume: 300 × 300 × 300 mm Layer thickness: 20–100 µm Laser type: Ytterbium fiber laser Laser power: 600–1000 W Materials: Stainless steel, tool steel, titanium, aluminum, CoCr, Inconel, etc. Control: CELOS Touch-Screen Electrical Data: Supply: 400 V ±10 %, 50/60 Hz Power consumption: 17.3 kVA Max. current draw: 25 A Recommended circuit protection: 25–32 A DC control voltage: 24 V AC control voltage: 400 V Shielding Gas Supply: Gas: Argon 4.6+ Minimum consumption (flooding): 1000 L Average consumption: 72 L/h Gas pressure: 6–8 bar Connection: W21.80 × 1/14" Cooling System (HYDAC RFCS-G2-002600): Refrigerant: R134a Cooling capacity: 2.2 kW Pump capacity: 15 l/min at 3 bar Dimensions: 871 × 610 × 639 mm Weight: approx. 80 kg Fire Extinguishing System: Automatic LIFDESTM system Activation temperature from 110 °C Optical & acoustic alarm (95 dB) Important Note: "The table shown in the photos is not included in the sale." Condition: used The system was fully operational until dismantling, clean, well-maintained, and is in excellent technical and optical condition. Kedpfx Aox Ei Smeg Uedg Scope of delivery: (see picture) - DMG MORI LASERTEC 30 SLM machine - HYDAC industrial cooler - DMG MORI SmartKey USB dongle - Comprehensive documentation (several folders) - Integrated powder sieving machine - Filter element - Accessories as pictured (Subject to technical changes and errors in specifications!) For further questions, please do not hesitate to contact us by phone.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 24,257 h, This STEINER Projet MJP 2500 Plus was manufactured in 2018. It's a plastic 3D printer designed for detailed and precise object creation. Ideal for prototypes and small-scale production, this machine represents a significant opportunity for those looking to enhance their 3D printing capabilities. Contact us for more information. Application Types Kdedpfx Asx Nr Thjg Usg 3D Printing