Used Optics for sale (2,750)

Year of construction: 2021, condition: excellent (used), Latest model Tomra Odenberg Halo III optical grader. Perfect for sorting greens, misshapes, mechanical damage, surface blemishes and size outliers. Very low running hours, only used for a short time and then put in to dry storage. Rare opportunity - find another one as new as this. Ncsdpfxoxvt Hto Aiyeu

Condition: excellent (used), Here we offer you an FRT MicroSpy Mobile. Device designation: FRT MicroSpy Mobile, Art. No. MSP 105 00 Device number: MSP1033 FRT MicroSpy Mobile Portable optical profilometer for non-destructive 3D surface measurements directly on the component. Due to its portability, the MicroSpy Mobile is ideally suited for mobile use on large Nedpfszdnqcjx Aiyjcu machines, vehicles, rollers, glass panes, or other large components. This enables high-resolution and non-destructive measurements to be performed "on-site" to determine important characteristics of surfaces, such as roughness, contour, topography, layer thickness, wear, load-bearing capacity, or volume. Smaller samples can be measured directly on the measuring table. Usable on large construction and machine parts. Excellent resolution values. Excellent reproducibility. Non-destructive measurement. Handles and adjustable support feet. Low weight (approx. 5 kg). FRT Technical Specifications: Device: MicroSpy Mobile xy-travel 50 x 50 mm² xy-table Type: compact XY cross table with open frame Bearing: mechanical cross-roller guide Drive: DC motor with ball screw Travel (XY measuring range): 50 x 50 mm² (or 20 x 20 mm² with CWL 3 mm) Position measuring system: rotary encoder Measuring system resolution: 0.25 µm XY repeatability: < ± 1 µm Table height variation (per axis): < 2 µm / 50 mm (of which not reproducible): < 0.5 µm Right angle XY: < 4 µm / 50 mm z-axis, motorized: Type Position Drive Travel Position measuring system Measuring system resolution Axis wobble Coarse adjustment, manual: Type: dovetail guide with fine drive Adjustment range: 25 mm Measurement: Minimum point distance xy: 1 µm Sample size: - Sample weight: - Min. measurement speed: 1 µm / sec Max. measurement speed: 50 mm / sec Overall system: Total weight: approx. 150 kg of which measuring system: approx. 5 kg Footprint measuring system: approx. 0.3 x 0.3 m² Dimensions control unit (W x D x H): approx. 0.65 x 0.65 x 1.0 (1.6) m³ Power supply EU version: 110 - 240V, 50 - 60Hz, 16A Power supply US version: 110 - 240V, 50 - 60Hz, 16A Power consumption: typically 300-400 W Compressed air supply: - Ambient temperature: 22°C ± 5°C Temperature stability: < 0.5°C/h Environmental conditions: measuring room Scope of delivery: 1 x XY table with 50 x 50 mm² travel 1 x Mobile base with electronics 1 x Chromatic sensor FRT CWL 600 µm 1 x Electronics for chromatic sensor 2 x Keys for computer 2 x Keys for rear door 1 x Power cable for cold devices 1 x Mouse (PS/2) 1 x Keyboard 1 x Monitor 19'' TFT Type: FRT MicroSpy Mobile Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Optical encoder Manufacturer: Heidenhain Nedpfx Ascifpmsiyecu Type: OZA II 02 - 6 Device number: 2739 Mounting distance: 14.30

Condition: ready for operation (used), Sill Optics T85/0.14 / S5LPJ6030/AAA telecentric lens, used, normal signs of use, 100% functional, scope of delivery as per photos Nedpfx Asxahzasiyocu

Condition: good (used), Year of construction: 1984, CNC Optical Profile Grinding Machine Wasino GLS-130AS 1984 Nsdpfx Aisp R Rm Isyscu

Condition: ready for operation (used), For sale here is an optical profile grinding machine by Fritz Werner, type SP. The machine is in very good condition and can be tested on site. Technical data: - Axial relief: 0 to +35 - Lateral relief: ±15 Nodpfx Aiowv Havsyocu - Grinding carriage stroke, fine adjustment: 36 to 72 per min - Maximum grinding wheel diameter: 175 mm - Grinding spindle speed: 1925 to 3850 per min - Maximum workpiece height: 125 mm - Workpiece length: 250 mm - Variable speed motor for grinding spindle: 1400 to 2800 per min Should you have any further questions, please feel free to contact me.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, TRI OPTIQUE Manufacturer: PELLENC Type: M 2800 BB HR Working width: 2,800 mm Option installed in June 2024: separator for all types of metal, including stainless steel, metal sensor. New belt. The machine is capable of sorting all types of plastic by quality, all metals including stainless steel, and wood. The machine has just been serviced. Feeding system: Njdpfeyy Aa Tjx Aiyjcu Manufacturer: SINEX Type: MU 75 6500 Power: 2 x 3 kW Output conveyor 1: Manufacturer: RMIS Output conveyor 2: Manufacturer: ARVAL

Condition: used, TH6D-150-CFAC-AB, Scansonic Optical Seam Guide Model: TH6D-150-CFAC-AB Ncedpfx Ajquqqmeiysu Condition: Used

Condition: used, ILD1810-50, optoNCDT 1810, Micro Epsilon Laser Triangulation Sensor System RS232 Nsdpoq S Snyefx Aiyscu Model: ILD1810-50 Condition: Used

Condition: used, ILD1800-750VT, optoNCDT 1800, Micro Epsilon Laser Triangulation Sensor System RS232 Njdoq S Snrspfx Aiyecu Model: ILD1800-750VT Condition: Used

Condition: new, Hensoldt Wetzlar ZKG 7x35 Bundeswehr optical set + Nedpfsy Il Ivjx Aiyecu

Condition: used, functionality: unexamined, Used Veeco Wyko NT1100 optical profiler system. Manufacturer: Veeco Ncodpfx Asy Urwqsiyju Model: Wyko NT1100 Includes technical documentation/manual, computer system cards, cabling, and magnifying lenses.

Condition: ready for operation (used), Telecentric Measuring Machine, Optical Measuring Machine, Part Measuring Machine, Profile Projector, Used Machine Ncedju T I Edspfx Aiyju Overall Dimensions: Length: 910 mm Width: 700 mm Height: 2100 mm Weight: 155 kg Electrical Specifications: Voltage: 230V Frequency: 50Hz Workpiece Clamping Range: 0–230 mm Cameras: Manufacturer: Cognex Corporation Model: 821-0034-1R Rev B Manufacturer: Vision Control Model: T201/0.12 Applications: This machine is ideal for precision measurement and quality control of workpieces, especially in industries where accurate dimension verification and defect detection are crucial (e.g., automotive, electronics, production lines). The advanced machine vision technology of Cognex and Vision Control cameras ensures fast and reliable measurements.

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 15 kg, warranty duration: 12 months, total height: 2,000 mm, type of input current: AC, total width: 1,000 mm, total length: 800 mm, overall weight: 800 kg, input voltage: 230 V, Equipment: documentation/manual, lighting, type plate available, Mahr Multiscope 400 Multisensor Measuring Device equipped with camera and Renishaw touch probe system Fully functional with factory acceptance before delivery! Nodpfow Slafex Aiyscu Comprehensive maintenance history Measuring range: 400x200x200 mm Maximum workpiece weight (glass plate): 15 kg Instrument weight: 800 kg Control cabinet weight: 90 kg External dimensions: 800x1000x2000 mm Maximum traverse speed: 150 mm/s Accuracy: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L = measurement length in mm) Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt 2025. Includes the latest software update for Windows 10 (Windows 11 upgrade and OptiCheck3D 2025 available as options), including free lifetime software hotline and user support. Optional: Delivery via factory service or forwarding agent, worldwide. Optional: On-site commissioning & calibration Optional: Training service Online and on-site demos available with customer parts, application consulting by accredited Profitech metrology laboratories during project planning. Available complete service: – Delivery, installation, commissioning, acceptance according to standards, certification, and comprehensive acceptance documentation. Individual training and education programs also bookable as online courses. Creation of your measuring programs for direct operation with the device is also possible. Rental, lease-purchase, or financing possible directly via Profitech without any financial institution. The measuring device can be individually configured to customer requirements (within the EU). Reference number: 01814-1-ms400 (Please always include this with inquiries)

Year of construction: 2013, condition: used, functionality: fully functional, Tomra Halo 1500 (Titan 60") for sale. The machine is currently in use in a potatoe packhouse in Germany and will become available June/July 2026. Prior delivery, the machine will undergo a service and througough cleaning in our workshop, including the replacement of broken fingers, infeed conveyor as well as the hedgehog band. Nedpfxjx A Ebpe Aiyjcu

Year of construction: 1994, condition: used, machine/vehicle number: RX 1020 FF 4C - 146.2048.4, We are offering this used PULSARR (Best / TOMRA) RX 1020 FF4C optical sorting machine, including a vibratory infeed conveyor, manufactured in 1994. Manufacturer: PULSARR (BEST / TOMRA) Year of manufacture: 1994 Machine number: 94014 Serial number: 146.2048.4 Type: RX 1020 FF4C Working width: 1200 mm Nedpfjy Tzf Ijx Aiyscu Up to now, the machine has been used to sort potato cubes of 10 x 10 x 10 mm. Capacity: 3.5 - 5 t/h. Foreign objects and black spots were sorted out. In July 2007, the machine received a Pollux computer upgrade! (equivalent to the current Genius model) Then, in 2015, the Pollux software was upgraded again. This means that the frame and conveyor belt remained, but the complete camera optics and the majority of the control system were replaced with the latest technology, which corresponds to the successor model, the Genius. The machine has been cleaned, visually refurbished, and faulty electronic components have been professionally replaced. The machine has been stored for approximately 3 years. Our offer refers to a used machine including a vibratory infeed conveyor, without any warranty, and without installation or commissioning. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2026, Working width: 600 mm Working height: 220 mm Minimum workpiece length: 250 mm Units: 4 1. Saw cutting unit, Random System: Saw cutting head 2. Brush: Metal, diameter 220 mm 3. Brush: Tynex grit 60, diameter 220 mm 4. Brush: Tynex grit 120, diameter 220 mm Height adjustment: Handwheel Height indicator: Mechanical counter Feed rate: 4 - 12 m/min Motor power, saw cutting unit: 1.1 kW Motor power, brushes: 4 kW Motor power, feed: 0.37 kW Nodpfx Aehwrp Rjiyjcu Machine length: 2800 mm Machine width: 1500 mm Machine height: 1600 mm Weight: 1500 kg

Condition: used, functionality: fully functional, total width: 860 mm, total length: 2,540 mm, total height: 750 mm, overall weight: 600 kg, plate height: 120 mm, Optical table (Newport) - Dimensions 2400 x 900 x 200mm - inkl. threads for clamping Njdpfx Aezfxtqsiyocu - with damped steel frame - working level 750mm

Condition: excellent (used), For sale: Professional KEYENCE IM-7500 measuring system with IM-7020 head. The device is designed for fast and highly precise measurement of components in production and quality control. The equipment enables automatic measurement of multiple dimensions simultaneously using a camera. Ideal for CNC workshops, tool rooms, and industrial applications. Technical data Manufacturer: KEYENCE Model: IM-7500 Head: IM-7020 Type: Optical measuring system Country of origin: Japan Automatic measurement by camera High measurement accuracy Condition Ncjdpfxoyvv Trj Aiyeu Used Fully functional Normal signs of use Included in the set KEYENCE IM-7500 unit IM-7020 head Monitor Control unit Keyboard and mouse Wiring

Condition: good (used), Optical dividing head, precision dividing head -Max. tip height: 76 mm -Max. center distance: 200 mm -with collets: 3, 4, 5, 6, 7, 8, 9, 10, 16 mm -wooden box Nedpfx Aeb A Iqbsiyscu -Total weight per box: 42 kg Quantity: 1 piece available

Year of construction: 2021, condition: excellent (used), Tomra Optical sorter model 1000 halo. For high performance sort/grading. top and bottom sensors with rejection. Can work on various veg and fruit products. Ncodsuixp Ejpfx Aiyou

Condition: used, Year of construction: 1996, Technical details: grinding length: 1370 mm grinding width: 560 mm workpiece height: 800 mm Ncsdpfow S Hy Hjx Aiyju total power requirement: 50 kW dimensions of the machine ca.: 9 m ABA Z&B 2000, profile grinding machine with swivel dresser Mounting fixtures: magnet, dividing head E-axis dresser B-axis dividing head *

Year of construction: 2022, operating hours: 1,471 h, condition: like new (used), Automatic classification and separation of various types of materials (plastic, film, paper, metal, textile, wood, etc.) by composition (NIR), color (VIS) and/or shape. Approximate dimensions: 1923 x 2175 mm. Height: 2055 mm. Approximate weight: 1080 kg. Ncodpfx Asy Sm Dasiyju

Year of construction: 2022, operating hours: 1,262 h, condition: like new (used), Automatic classification and separation of various types of materials (plastic, film, paper, metal, textile, wood, etc.) by composition (NIR), color (VIS), and/or shape. Approximate dimensions: 1923 x 2660 mm. Height: 2055 mm. Approximate weight: 1166 kg. Njdpfjy Smzxjx Aiyecu

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 200 mm, measuring range Y-axis: 85 mm, measuring range Z-axis: 50 mm, total width: 483 mm, total length: 598 mm, total height: 464 mm, overall weight: 64 kg, input current: 5 A, repeat accuracy: 0.005 mm, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, PG1000-400 – Optical system for inspecting the geometry of rotating cutting tools PG1000-400 is a professional optical measuring and inspection system for quickly checking the geometry of cutting tools. It is designed for tool manufacturers, sharpening shops, grinding shops, tool rooms, CNC machining centers, and quality control/metrology departments. Nsdpfx Aiszdz S Toyjcu Its main application is the inspection of rotating cutting tools after manufacturing, grinding, sharpening, or reconditioning. The system is suitable for HSS and solid carbide tools, especially drills, end mills, step drills, reamers, taps, form tools, micro tools, and custom-made tools. The device can also be used to inspect carbide inserts, selected thread geometries, screws/bolts, and other precision parts, provided that the geometry being inspected is optically accessible to the camera. The system's primary focus is on the inspection of cutting tool geometry. Typical applications: - In-process inspection directly at the grinding machine or in production - Incoming and outgoing inspection of tools - Inspection after sharpening/regrinding - Quality documentation and measurement reports - Repeated inspection of serially produced tools PG1000-400 allows for the inspection of, for example: - Rake angle and clearance angle - Helix angle - Point angle for drills - Radii and corner radii - Diameters and distances - Cutting edge length - Land width, margin width, facets - Web thickness - Tool profile - Runout - Condition and wear of the cutting edge - Comparison of geometry with DXF/DWG drawings The system operates optically and non-contact. This is advantageous when inspecting sharp edges, fine microgeometries, coated tools, and precise edges, where speed, repeatability, and minimizing operator influence are important. The system includes REACTION software, developed specifically for the inspection of cutting tools. The software offers more than 50 measuring functions, edge detection, automatic alignment of measuring points to the edge, saving inspection scenes, comparison with DXF/DWG geometry, PDF reports with PASS/FAIL evaluation, and data export to Excel/CSV. Technical specifications: - Recommended tool diameter: 0.635–75 mm - Tool measuring length: approx. 190–200 mm - Magnification range: 12.5× to 145× - Camera: 5 MP - Monitor: 27" 4K Ultra HD - Measuring range: 85 mm vertically × 200 mm horizontally - Accuracy/repeatability: ±5 µm at maximum magnification - Device dimensions: approx. 598 × 483 × 464 mm - Weight: approx. 64 kg Offered configuration: - PG1000-400 optical cutting tool inspection system - M / F / A encoders - PC with REACTION software - 27" 4K Ultra HD monitor - Flexible LED lighting with diffuser - Curved magnetic diffusion plate - Rotating base block for clamping fixtures - 1000-026-5"-ASS – 5" V-block assembly with insert, top clamp, and stop - Basic remote operator training About the manufacturer: PG1000 is based on the long-term development of systems for inspecting cutting tools. The first generation of PG1000 was introduced in 1993. The system is manufactured in the USA by PG Inspection Technologies LLC, which specializes in this product line. Since 1996, more than 1000 PG1000 systems have been delivered. Condition and delivery: - New machine - Year of manufacture: 2026 - Warranty: 12 months - Location: Czech Republic / EU - Delivery, assistance with commissioning, and training according to agreement - CE marking and relevant EU documentation The device i