Used Old Mature for sale (21,921)

Condition: new, Year of construction: 2023, functionality: fully functional, Leybold Turbovac 90 i IS / DN 63 CF 811041V1000 Bjdpfx Absw I Rt Asbodk

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8 units of hydraulic BWP pendulum axle assemblies with remote control. Technically permissible gross weight 219,000 kg Technically permissible payload 175,620 kg Hydraulically suspended, 8-axle steered Goldhofer low-bed heavy-duty trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and extendable excavator low-bed section up to 5 meters, featuring 4 wheel recesses, ABS, technically permissible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck type STH/ST Year of manufacture: 2002 Can be combined with heavy-duty module undercarriages, drivable loading platforms. Unladen weight approx. 5,900 kg Permissible front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" pin Removable aluminum side walls Fully hydraulically adjustable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty module First registration: 14.11.2001 As a single module, technically permissible total weight: 108,000 kg, technically permissible axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8 hydraulic pendulum axles, 24 wheels, tire size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Integrated into chassis: hydromechanical dual-circuit all-wheel forced steering with a maximum aggregate steering angle of 60°, integrated hydraulic oil tank Optimized bolt-lug coupling at front and rear for longitudinal combinations Single-tired pendulum axle assemblies with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles BPW axles with drum brake and ABS, technically permissible axle load of 34 t at 5 km/h 3rd module: Extendable low-bed heavy-duty module - Excavator bridge Year of manufacture: 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide, loading height 0.40 meters Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with drive-on module at the front Construction height in wheel recess area approx. 150 mm Load capacity up to 80 t in low-bed and 175.6 t in overall STHP8 (3+5) module possible. Unladen weight 11,900 kg Front and rear hydraulic bolt-lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty module First registration: 04.01.2002 Technically permissible total weight: 115,000 kg, technically permissible axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tired hydraulic pendulum axle assemblies with 4 wheels per axle line, 20 wheels (tire size 285/70 R 19.5) Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the configuration. For the special low-bed combination, a current manufacturer's certificate from Goldhofer is available. The low-bed trailer can be tested at our facility. Price NET excluding 19% VAT. All information without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285 Bedsxwgngepfx Abbedk

Condition: ready for operation (used), Eckold stretching and shrinking tool for e.g. Kraftformer HF 80 CH Includes one upper and one lower tool. Additionally, you will receive a set of clamping holders, suitable for e.g. Kraftformer HF80CH. Shipping or collection in Bremen possible _____ Bsdpfjxp Nl Esx Abbsdk Our terms and conditions apply; the seller assumes no liability for typographical or data transmission errors. The appearance of the items offered corresponds to their age and the images shown. The technical condition and wear correspond to the age of the items. Used machines are sold exclusively to commercial customers and without warranty.

Condition: excellent (used), Year of construction: 2001, Eckold Kraftformer KF 665 ECKOLD - KF 665 MACH-ID 9228 Make: ECKOLD Type: KF 665 Year: 2001 Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening Machine equipped for tooling: FWR1307 Bjdpfxexcm Epo Abbedk FWA 1306 FWA 802T FWA 1002T LFA 120S LFA155T Number of strokes: 150 / 300 / 600Min. Maximum sheet thickness:6.0mm Horizontal troath: 675mm Vertical troath: 450mm Max. thickness Stainles:4.0mm Max. thickness Aluminium:8.0mm Motorised ram adjustment:0 - 80 Power: 4.1kW Length: 1950mm Width: 860mm Height: 2050mm Weight: 2000kg

Condition: used, Taschen-Falzmaschine 16 Seiten Seitenfalz - Buckle Folder for 16 pages cross Fold Heidelberg Stahlfolder TH82-6-6-VFZ Taschen-Falzmaschine - Buckle Folder Heidelberg Stahlfolder TH82-6-6-VFZ 16 Seiten Seitenfalz - 16 pages cross Fold Bodpfx Abjxnc S Asbedk Walzen 2020 erneuert / Rollers 2020 renewed Year 2013 - Serial-No. 0-01500 Rundstapelanleger / Round Pile Feeder RFH-82 Format / Size min. 140 x 180mm Format / Size max. 820 x 1200mm Falztyp / Folding Type: 6 buckles - 6 buckles - 1 VFZ 52.D Knife Speed 50.000 Cycles/hour Digitaler Bildschirm / Digital Display Auslage / Delivery Heidelberg SPH-70 Inklusive Kompressor / include Compressor Inklusive Handbücher / Included Manuals Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), ECKOLD KF 653 C - Powerformer - Horizontal throat depth approx. 600 mm Bdedjxrfwvspfx Abbok - Vertical throat depth approx. 480 mm - Working stroke 8 mm - Ram adjustment approx. 80 mm - Foot switch - 1x tool included Formable sheet thicknesses: - Steel (400 N/mm2) max. 6 mm - Aluminium (250 N/mm2) 8 mm - Stainless steel (600 N/mm2) 4 mm Dimensions: LxWxH 1.6x0.7x1.9 meters / Weight 1770 kg Errors and omissions excepted.

Condition: excellent (used), For sale: Professional SK40 ER40 tool holders from renowned manufacturers including Diebold and ZÜRN – Germany. Complete holders, some equipped with collets and tools (drills, milling cutters, taps). Holder type: SK40 – ER40. Models include: TC40xER40x70-AD. Manufacturers: Diebold / ZÜRN Germany. In very good condition, technically sound – ready for use. Robust, precise design and German premium quality. Applications: CNC machining centers, milling machines, tool workshops. Bodpjxcbxqjfx Abbjdk

Condition: used, empty load weight: 8,600 kg, maximum load weight: 35,900 kg, overall weight: 44,500 kg, axle configuration: > 3 axles, first registration: 10/2006, suspension: air, tire size: 235/75 17,5, tire condition: 50 %, color: green, Year of construction: 2006, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 69977 Goldhofer, STN-L3-37/80A * Year of manufacture: 2006 * ABS, Anti-lock Braking System * Air suspension * Retractable lashing rings * Self-tracking rear axle * Air connection coupling heads (red + yellow) Bsdpfx Abjxpdbhsbodk * Spare wheel carrier with spare wheel * 2x 7-pin connector plugs * Lifting and lowering device * Telescopic – extendable trailer * Heavy-duty lashing rings * Rear support * Suspension: Air * Gross vehicle weight: 44,500 kg * Unladen weight: 8,600 kg * Payload: 35,900 kg * Perm. total weight: 44,500 kg * Tyre condition 1st axle: 50% – size: 235/75 R17.5 * Tyre condition 2nd axle: 50% – size: 235/75 R17.5 * Tyre condition 3rd axle: 50% – size: 235/75 R17.5 * Tyre sizes: 235/75 R17.5 * Platform length: 9,000 mm * Rust present * Sale only without TÜV (roadworthiness certificate) Disclaimer: Specifications are subject to change, prior sale, and errors excepted. You can find more photos and videos on our website. Our comprehensive services include, for example: * Purchasing/selling/renting commercial vehicles * Fast and straightforward financing * Handling of all (export) documentation * Ordering of export and customs licence plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV inspections, registration service * Transferring commercial vehicles Please contact our trained staff – we are happy to advise you.

Condition: good (used), Year of construction: 1997, Strapping machine, packing machine, strapping machine -Semi-automatic: pallet strapping -on: built-in transport frame -Voltage: 230 V Bsdpfx Abed R Ak Tebsdk -Dimensions: 650/800/H1250 mm -Weight: 102 kg

Condition: excellent (used), Year of construction: 1980, ECKOLD - KF 460 Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening Machine equipped for tooling: FWR1307 FWA 1306 FWA 802T FWA 1002T LFA 120S LFA155T Number of strokes: 300 / 600Min. Maximum sheet thickness:4.0mm Bdedpfxsxcluve Abbjk Horizontal troath: 460mm Vertical troath: 475mm Max. thickness Stainles:2.0mm Max. thickness Aluminium:3.0mm Motorised ram adjustment:0 - 60 Power: 3.0kW Length: 1700mm Width: 810mm Height: 1700mm Weight: 1250kg

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 17434268, type of input current: three-phase, input voltage: 400 V, electrical fuse: 63 A, input current: 61 A, input frequency: 50 Hz, pressure: 18 bar, stack height: 1,900 mm, total length: 1,600 mm, total width: 750 mm, tank capacity: 410 l, empty load weight: 315 kg, type of cooling: water, Machine Description and Technical Data 2.1 Machine Description The RED COMPACT units are delivered fully pre-assembled and require only electrical connection and hydraulic hookups on site. Main Components: A: Self-supporting frame with stainless steel cladding (panels 1–6 removable) B: Basin with evaporator C: Condenser unit D: Temperature controller E: Control cabinet F: Hydraulic circuit with pump (second pump optional) 2.2 Structure The compact monoblock housing contains all components necessary for operation. The external cladding is made of stainless steel; individual panels can be removed for maintenance purposes. 2.3 Basin The stainless steel basin houses the evaporator block. It is insulated with high-density polyurethane foam. A blower ensures water circulation within the basin. 2.4 Condenser Unit The condenser unit can operate with either cooling tower or well water, depending on order specification. It supplies the evaporator block and is located beneath the basin. 2.5 Temperature Controller The controller is a modern microcomputer with a high-resolution display and LED indicators for operating status. The control system is programmed to offer maximum operational safety with easy user operation. 2.6 Control Cabinet The control cabinet is dust- and splash-proof. It contains: - Main and emergency switch - Contactors, thermal relays, fuses - Safety transformer for control circuits Access is provided by removing panel 1 below the temperature controller. 2.7 Hydraulic Circuit with Pump Panel 3 is removed for connection. The following connections are provided: A – Water make-up (T1): Connection to water supply; fill level is controlled via float valve. B – Return line (T2): Return flow from the consumers. C – Overflow (T3): Connection to the process wastewater outlet. D – Chilled water outlet (P1): Supplies the consumers; open the shut-off valve before commissioning. A second pump (P2) is available as an option. E – Condenser water supply: Bdjdpexvca Asfx Abbok The shell-and-tube condenser can be operated with well water or cooling tower water: Scheme A – Well Water: Use the small connections C1, C2 (inlet and outlet). The large connection remains closed. A pressure-regulated valve control can be installed as an option. Scheme B – Cooling Tower Water: Use C3 and C1/C2 in parallel to increase the flow cross-section. It is recommended to install a mechanical filter at the water inlet to prevent contamination. Manufacturer: FIC S.p.A. – Via Trivulzia 54, 23020 Mese (SO), Italy Model: RED COMPACT V.7

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 0M001224, Le compresseur Frascold Q Series Q5-28.1E est une solution fiable et efficace pour diverses applications industrielles et commerciales. Conçu avec une ingénierie de précision, ce compresseur offre des performances et une durabilité exceptionnelles. Que vous en ayez besoin pour la réfrigération, la climatisation ou d'autres systèmes de refroidissement, le Q5-28.1E garantit des résultats constants. ➢Points forts du produit : Options de tension polyvalentes : Le Q5-28.1E est compatible avec différentes configurations de tension, notamment 220 v-240 v/380 v-420 v/3 phases/50 hz et 265 v-290 v/440 v-480 v/3 phases/60 hz. Cette flexibilité garantit une intégration parfaite dans votre installation existante. Construction robuste : avec un poids net de 79 kg, le Q5-28.1E est robuste et conçu pour résister aux environnements exigeants. La construction robuste garantit une longue durée de vie et un fonctionnement fiable. Dimensions compactes : Avec des dimensions de 449 mm (L) x 286 mm (l) x 328 mm (H), ce compresseur est peu encombrant. Il s'intègre dans les petits espaces sans compromettre les performances. ➢Spécifications : Frascold Q Series Q5-28.1E compressor comes with: Voltage: 220v-240v/380v-420v/3ph/50hz - 265v-290v/440v-480v/3ph/60hz Bjdpfx Aber Id T Aobodk Net Weight: 79kg Dimensions: 449 (L) x 286 (W) x 328 (H) The Frascold Q Series Q5-28.1E compressor combines versatility, durability and a compact design, making it an excellent choice for your refrigeration system. Whether you're upgrading an existing system or starting a new project, this compressor delivers exceptional performance. Rely on Frascold's reputation for quality and reliability.

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/1998, total width: 2,500 mm, total height: 1,550 mm, ROR axle(s), drum brake system, air suspension, support winch(s), trailer for mobile crane - counterweights/counterweights Bedpfxsvnm Thj Abbedk Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide you with an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment conditions apply. We would be happy to provide you with a financing or leasing offer for this object. Please contact us!

Condition: ready for operation (used), Magnetic holder / magnetic base, Magnetic Holder, model E925. Used for mounting measuring tools, dial indicators or other precision instruments. Such bases are typically used in: - mechanical workshops, - metalworking, - machine setup, - precision measurements. Bdodpfx Abovkuhlebek

Condition: used, Year of construction: 2008, Extendable superstructure: Yes Production country: DE Bedpfjxixpasx Abbodk Please contact Theo Lelie for more information

Condition: ready for operation (used), Year of construction: 2004, Brand: Reinbold Model: AZR600 Year of manufacture: 2004 18.5 kW New knives, new sieve Bodpfoxvc I Tsx Abbsdk

Condition: used, Year of construction: 2016, Folding machine Heidelberg-Stahlfolder KH78-82/4KZ Year: 2016 Description: - 16 page folder Feeder - Round pile feeder: RFH-82 - Pump Folding unit Bjdsw Udnaopfx Abbodk - Parallel fold unit with 4 buckle plates - First cross fold - Second cross fold to the left and right - Noise hood over the entire folding section Delivery Palamides Alpha 500 HD - Vertical stack delivery with pressing - Roller table delivery on the left

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 0G000072, The Frascold Q5-21.1Y compressor is a reliable, high-performance solution for a variety of industrial and commercial applications. With an impressive flow rate of 21.18 m3/h, this compressor guarantees efficient cooling and refrigeration processes. Whether you work in HVAC, cold storage or food processing, the Frascold Q5-21.1Y delivers exceptional performance. ➢Product highlights: Bjdpfer Id Tqex Abbsdk ✓Powerful performance: The Q5-21.1Y boasts a maximum power consumption of 6.6 kW, making it a suitable choice for demanding applications. ✓Optimal Oil Management: With a 1.6-liter oil charge, this compressor ensures smooth operation and long service life. ✓Rugged construction: the Q5-21.1Y is built to last, with dimensions of 449 mm x 286 mm x 325 mm and a weight of 79 kg. Its solid design stands up to the rigors of industrial environments. ✓Versatile connections: The suction connection is 1 1/8", and the flow is 3/4", allowing easy integration into existing systems. ➢Specifications: Compressor Frascold Q5-21.1Y, discharge: 21.18 m3/h, maximum power consumption: 6.6 kW, oil charge: 1.6 l, connection: suction 1 1/8 inch, discharge 3/4 inch, dimensions (length x width x height) 449 x 286 x 325 mm, weight: 79 kg` Price without VAT.

Condition: as good as new (ex-display), Year of construction: 2024, - Frame and edge press 1-sided/stationary Bdodpfx Aohd N Eqjbbek - Gluing stand without frame press device - Usable size in mm as edge press 2900 x 1600 - Useful dimension in mm as frame press 2600 x 1600 (with option QJ 002) - Outer dimensions in mm 3100 x 700 x 2150 mm (LxWxH) - 3 vertical pressure beams with roller bearings, robust angular gear and thrust bearing - pressing stroke 150 mm, pressing force 2000 kg - Frame press device with left abutment - sliding carriage for width adjustment, with central locking system - 2 pcs. horizontal angular gear - Hold-down device with spindle press pressure - Chassis with 4 swivel castors (2 with brakes) - Painting: RAL 9002 grey-white, pressure plate and abutment RAL 5010 gentian blue

Condition: used, Used Refurbished Bdjdpfxjwhnqys Abbok 1-year warranty New electric motor, mineral oil included 5.5 kW motor 1.7 amps/1450 rpm - 1 rpm Measured ultimate pressure: 1.5 x 10-2 mbar With gas ballast: 2 x 10-1 mbar

Year of construction: 2002, condition: good (used), Machine type: Laser welding machine Manufacturer: Arnold Serial number: 20435 DCS Bdjdpfx Aokv Upijbbjk Year of construction: 2002 Available immediately Similar machine is 2x available Ex site for self-dismantling Optionally we can offer dismantling and loading

Condition: used, machine/vehicle number: d25bedc76ae946ce00df59d5c, empty load weight: 11,600 kg, maximum load weight: 35,900 kg, overall weight: 47,500 kg, axle configuration: 3 axles, first registration: 06/1982, tire size: 9,5 r17,5 zwilling, Further information 1st axle rigid, 2nd + 3rd axle hydr. positively steered with saddle deflection wedge, 1 pair of hydr. support legs incl. hand pump for emergency operation, leaf suspension, 6 storage compartments, steel riffle plate complete, air: red-yellow + electrics: 1x 7-pin Length of gooseneck approx.: 4,380 mm Length drop deck approx.: 11,300 mm Saddle height approx.: 1,200 mm Bodpfoi Riyzjx Abbedk

Condition: new, Year of construction: 2024, Further variants on request - 4 tiers - clamping depth 1050 mm - 2 pressure beams -1200 mm long, 60 mm high, per tier - 2 straight, infinitely adjustable counter bearings, 1200 mm long, per tier Bdedogqu Alopfx Abbsk - 6 hold-downs with handwheel, per tier - 6 support arms, per shelf - all support arms with plastic supports (glue-repellent) - maximum pressing length 2600 mm - powder coated (glue repellent): grey white RAL 9002, moving parts light blue RAL 5012 - the presses are delivered ready for operation with pressure regulating valve + air standard connection.

Condition: new, Year of construction: 2024, - Length 3000 mm with 3 support feet - roller and measuring track for lighter plastic, aluminium and steel profiles - supporting rollers, roller diameter 50x1,5mm, galvanized steel tube - axle diameter 8mm - track width 390 mm, usable roller width 300mm Bdedpshd N Hyofx Abbek - Load capacity per metre of roller conveyor approx. 100 kg/m - roller pitch approx. 290 mm - track height adjustable from 770-1070 mm - all parts are painted, colour silver grey RAL 7042, feet anthracite grey RAL 7016

Condition: new, Year of construction: 2024, Under-table cross-cut saw UTK-600 also with a pneumatic vertical front protective shield Execution according to the new current PLC safety control ltd. Of the new machinery directive Technical specifications: - Motor power 7.5 kW S1 - Max. Saw blade diameter: 600 mm - Saw blade holder: 35 mm - Cutting time per stroke: 4 sec. - Speed ​​on the saw shaft: 2800 rpm - Air consumption per cycle: 20 L - Working table height: 900 mm - Extraction nozzle: 2x120 mm, 1x100 mm - Operating pressure: 7 - 8 bar - Net weight: approx. 520 kg - Necessary air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase Cutting capacity in mm: 30 x 800 50 x 765 140 x 600 180 x 340 200 x 200 Standard basic equipment: - Saw blade feed pneumatic drive - * NEW two-hand safety PLC control - Automatic engine brake - Set of operating keys - Emergency stop button - Speed ​​regulator for saw blade feed Bdedsf Sqy Dspfx Abbsk - Fixed vertical protection - Upper safety pressure device (pneumatic protective hood) - suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018