Used Okuma Lvt 300 for sale (224)

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, CNC turning machine Okuma LB 400-M Control system: OSP-E100L Year of manufacture: 2005 Internal machine number: 83 Turning length: 1,250 mm Turning diameter: 620 mm Spindle speed: 3,500 rpm Tool turret: 12 stations (powered) Dsdps Ahm Upsfx Acyewd Tool holder: VDI 40 Spindle bore: approx. 110 mm 3-jaw chuck Kitagawa B15 Equipment: - Chip conveyor - Coolant system - Touch probe - Tailstock

Condition: ready for operation (used), functionality: fully functional, Manufacturer: Okuma Type: FUB-P4R2 Dsdpfx Aj Ahhngscyjwd Version 2.0 Article number: 1911-2242 Opus 7000 Condition: Used, but in good condition and fully functional.

Condition: excellent (used), Year of construction: 2005, operating hours: 6,820 h, functionality: fully functional, turning length: 1,075 mm, turning diameter: 620 mm, spindle bore: 110 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,075 mm, rotational speed (min.): 3,000 rpm, total height: 2,780 mm, total length: 5,800 mm, total width: 2,100 mm, overall weight: 8,600 kg, CNC Lathe with c-axis Okuma - LB 400M MACH-ID 9780 Make: Okuma Type: LB 400M Djdpfx Acezu Nu Reyjwd Control: OSP-E100L Year: 2005 KITAGAWA 400 mm chuck Spindle bore 110 mm Chip conveyor Feed rate X-Axis 20M/Min Feed rate Z-Axis 25M/Min Coolant and Filtration system Max. turning Ø: 620mm X-Axis: 300mm Z-Axis: 1075mm Spindle bore: 110mm Speedrange: 3500Rpm Spindle power: 45kW ATC / revolver: 12 Speed live tools:3000Rpm Chip conveyor: Yes Tool eye: Yes Hours: 6820H Pinole taper: 5Mk Length: 5800mm Width: 2100mm Height: 2780mm Weight: 8600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1995, turning diameter 340 mm turning length 500 mm Dwodpfx Acszgxfpsyjd control OSP 7000L weight of the machine ca. 4000 kg

Condition: used, 4 Axis Year Of Manufacture: 1998 8” Chuck 2 Turrets – Turret 1 – 12 Stations Turret 2 – 8 Stations Programable Tailstock 750mm Between Centres Live Tooling C Axis Dwjdpfxey Drune Acysd Touch setter Y axis Swarf Conveyor Okuma OSP 7000L Control

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, Used Okuma MA-600HB Horizontal Machining Center Year: 2008 Spindle cooling Max. 6000 rpm Z- 810 mm X- 1000 mm Dwsdpfeyrf I Aex Acyed Y- 900 mm Tool magazine for 150 tools 1 spindle 4 axes 10-pallet system We have 2 units available. Price is per unit, ex location.

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, Used Okuma MA-600 HB horizontal machining center, year 2008, including turncut function, spindle cooling, 6000 rpm. Travels: Z-810 mm, X-1000 mm, Y-900 mm. Tool magazine for 150 tools, 1 spindle, 4 axes, 6-pallet changer function. Djdpfxsywicve Acyowd

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 5,000 rpm, spindle motor power: 15,000 W, number of axes: 2, Horizontal turning machine manufactured in 2022. This Okuma GENOS L2000-e features a maximum turning diameter of 220 mm and a turning length of 500 mm. It is equipped with a spindle power of 15 kW and a spindle speed of 5,000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L2000-e machine we have for sale. Contact us for further details. Djdpfx Ace Adp U Hoyowd • Spindle: ASA6 mount, 52 mm bar capacity • Chuck: 8" self-centering • Max turning diameter: 220 mm • Swing diameter: 450 mm • Max turning length: 500 mm • Tailstock: Automatic cycle with MT5 rotating center, 5 kN thrust • Software/features: Tool life management; automatic chuck open/close and tailstock advance/retraction during rotation; CNC cutting force monitoring (OSP P300LA-e TEX Kit for X/Z and spindle); IGF Advanced (L) with 3D real simulation; API Library 2 (ON STATUS) • Thermal deformation control: TAS-C (Thermo Active Stabilizer - Construction) • Usage/condition: Very little used (about 8 months of operation) Additional equipment • Chip conveyor: hinge type • High-pressure coolant pump: 0.8 kW, 5 bar, 20 l/min • Parts unloader: parts catcher arm and unloading (applicable with manual preset) • Bar feeder interface: prepared for bar feeder • Tool setter: manual presetting • Tool holder kit: 4 external, 1 front, 3 boring bar holders, 8 bushings, 3 plugs Technical Specification Counter Spindle Yes Driven Tools No

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Okuma, controller model: OSP E100M, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 1,000 mm, workpiece weight (max.): 1,200 kg, total height: 3,280 mm, total length: 6,495 mm, total width: 3,460 mm, table width: 630 mm, table length: 630 mm, overall weight: 26,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 15 bar, number of slots in tool magazine: 60, Equipment: chip conveyor, We are pleased to offer this very well-maintained Okuma MA-600HB horizontal machining centre. The machine was manufactured in 2004 and is fitted with the OSP E100M control system. Technical specifications: Pallet table size: 630 x 630 mm Djdpfjz Tq Tkex Acyowd Number of pallets: 2 Table load: 1200 kg Movement X-axis: 1000 mm Movement Y-axis : 950 mm Movement Z-axis : 1000 mm Table indexing: 360 x1 ° Spindle Taper: MAS BT50 Spindle speed: 12.000 1/min Spindle motor: 37/26 kW Magazin capacity: 60 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you.

Condition: ready for operation (used), operating hours: 11,525 h, functionality: fully functional, machine/vehicle number: 0613, travel distance X-axis: 1,500 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 610 mm, controller model: Okuma OSP7000M, spindle speed (max.): 5,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Travel in X-axis: 1,500 mm Travel in Y-axis: 630 mm Travel in Z-axis: 610 mm Distance from spindle nose to table surface: 230–840 mm Distance from spindle center to front of column: 730 mm Main spindle Spindle speed range: 10–5,000 rpm Continuously variable speed control Spindle taper: 7/24, No. 50 Tool holder: BT50 Angle: 90° Diameter of front spindle bearing: 100 mm Work table Effective table size: 1,530 × 630 mm Table size: 1,800 × 780 mm Maximum table load capacity: 1,500 kg T-slot width: 18 mm Number of T-slots: 5 T-slot spacing: 125 mm Distance from table surface to bottom edge of machine bed: 830 mm Dwedpfx Acoztpmdsyod Feeds Rapid traverse X/Y-axis: 15,000 mm/min Rapid traverse Z-axis: 13,000 mm/min Cutting feed X/Y/Z-axis: 1–10,000 mm/min Average continuous cutting feed: 1–2,000 mm/min Tool changer Number of positions in tool magazine: 20 Tools included in the machine MACHINE DETAILS Control model: Okuma OSP7000M Operating hours (as of 12.04.2026) Power-on hours: 59,180 h Operating hours: 16,510 h Machining hours: 11,525 h Dimensions & weight Machine dimensions (L × W × H): 4,570 × 4,530 × 3,265 mm Weight: 11 t EQUIPMENT Kitagawa NC rotary table TSR180A Handheld terminal Mac mini IH Oil skimmer Chip conveyor Tools included in the machine Machine manuals Original tolerance reports Parameter backup / Backup of machine parameters

Condition: used, Year of construction: 2011, x-travel 762 mm y-travel 460 mm z-travel 460 mm table surface area 1.000 x 460 mm control Okuma OSP 20 M rapid traverse 40/40/32 m/min table load 0,7 t turning speed range 12000 U/min power capacity - milling spindle 22/18,5 kW max. torque on the spindle 198 Nm no. of tools in the magazine 32 Stück internal coolant system feed 20/43 bar tool taper BT 40 weight of the machine ca. 6,8 t dimensions 2.22 x 2,9 x 2,75 m CNC- vertical machining centre with internal coolant First installation 2014 - coolant through the spindel 15 bar, 20 ltr/min - air throug the spindle - chip conveyor - signal lamp Dodpfx Asz Nn Azocyowd - Dual tool change arm - external electric hand weel - tool lenght measuring and toolbreak detection - filter system - X- axis in gantry style - spindle oil cooler - thermal compensation spindel and bed - USB and Ethernet port - Hi-Cut Pro high speed control - 100 Zero offsets - thread milling

Condition: ready for operation (used), Year of construction: 2015, operating hours: 500 h, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, table load: 2,500 kg, overall weight: 20,500 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 36, number of axes: 3, This 3-axis Okuma Millac 852 VII was manufactured in 2015. It features a robust table size of 2,200 × 850 mm and a maximum table load of 2,500 kg. The machine is equipped with a high-torque spindle motor of 18.5 kW and a rapid traverse of 20,000 mm/min. If you are looking to get high-quality machining capabilities, consider the Okuma Millac 852 VII vertical machining centre we have for sale. Contact us for further details. • Condition: Excellent; approximately 500 cutting hours; near-new condition • Heavy-duty machining center for high material removal rates • Extremely rigid machine structure • Box guideways on all axes; quadruple box guideway system on Y-axis • Automatic oil lubrication for guideways with machine stop monitoring • Okuma OSP300 control with IGF conversational programming • Parameterized automatic tool collision prevention system • Automatic cutting force, tool load, and spindle torque monitoring • Tool life management and tool usage monitoring • Communication interfaces: USB, PCMCIA, RS-232 • Cutting force: 580 Nm Dwjdjzqcr Iopfx Acyod • Chip removal capacity: 540 cm³/min • Spindle speed: 6,000 rpm • Spindle oil cooler • Table size: 2,200 × 850 mm • Rapid traverse: 20,000 mm/min • Tool change time: 0.5 s; chip-to-chip time: 5 s • Machine currently under production; can be inspected under power by an official Okuma technician • Includes documentation: spare parts list, electrical diagrams, programming manual, operation manual • Delivery: Immediate, subject to prior sale Additional equipment • Renishaw tool measuring system • Independent Knoll high-pressure coolant system (70 bar) • 30-micron coolant filtration system • LTA mist extraction system • Rear hinge-type chip conveyor • Large set of BT50 tool holders • Transformer Technical Specification Taper Size BT 50

Condition: used, Year of construction: 2012, functionality: fully functional, 1 OKUMA CNC Lathe Model LT2000EX-2M1Y with OSPP200LA CNC Controller Including CE mark 1 set 〈European Standard Specification〉 1-1 Spindle motor VAC 11/7.5 kw (5 min./cont. ) 2 set 1-2 Spindle speed 50 - 6,000 min-1 2 set 1-3 Spindle dia. 62/100 mm, 140 Flat nose 2 set 1-4 C-axis control, 360 degree at 0.001 degree increment 2 set 1-5 Y-axis 95mm (+50 to -45) for upper turret 1 set 1-6 Upper V16 (turning & milling) + Lower V16 (turning & milling) Radial turret (No tool holder included) 1 set 1-7 Rotary tool drive motor, PREX 5.5/3.7kw (2 min/count) 2 set 1-8 Rotary spindle speed 45-6,000 min-1 2 set 1-9 Coolant supply system, 0.8kw x 3 sets pump motor 1 set 1-10 Work light, fluorescent lamp 1 set 1-11 Totally enclosed guard 1 set 1-12 Door interlock 1 set 1-13 Chip pan, side chip disposal type 1 set 1-14 Foundation washers and leveling jack screws 1 set 1-15 Machine lifting hooks 1 set 1-16 Chuck auto open / close with confirmation 2 set 1-17 Chuck air blower 2 set Dodpoy Rnbdefx Acyjwd 1-18 Lubrication monitor B-1 1 set 1-19 CE mark and EMC 1 set 1-20 Application for IEC standard 1 set 1-21 Double chuck operation pedal 2 set 1-22 Synchronized tapping (for LT2000EX-M) for Milling rotary tool 1 set 1-23 OSP-P200LA CNC Controller with 15" colour display, touch panel 1 set 1-24 OSP-P200LA 3D-M-E kit specifications 1 set *Multitasking machines Coordinate conversion (1 set) *Multitasking machines Profile generation (1 set) *Program storage Standard: 2GB (1 set) *Operation buffer Standard: 2MB (1 set) *Real 3D simulation (1 set) *Cycle time over check (1 set) *Load monitor (spindle, feed axis) (1 set) *NC operation monitor (incl. counter and monitoring function) (1 set) *Cycle time reduction function (1 set) *Variable spindle speed control (1 set) 1-25 Pitch error compensation X + Ys + Z 1 set 1-26 Inch / metric switchable function 1 set 1-27 Workpiece jump out detection 1 set 1-28 Status indicator lamp (2-layer lamp) instead of status indicator in 3D-E kit 1 set 1-29 Electrical power source application to suite local power source at each countries (CE transformer) 1 set 1-30 Chuck open/close during spindle rotation (LT-Standard) 1 set 1-set of tools - see last photo

Condition: like new (used), Year of construction: 2024, functionality: fully functional, maximum turning diameter: 2000 mm maximum turning length: 1400 mm control: Okuma OSP - P300 SA maximum workpiece weight: 10,000 kg maximum workpiece dimensions: 2000 mm x 1400 mm chuck diameter: 2000 mm C-axis positionable to 0.001° tool spindle traversable in X/Y/Z and indexable in B B-axis swivels 150° Y-axis travel: 1600 mm (+/- 800 mm) coolant supply through tool spindle Dodpfx Aceywg Aasyewd automatic dual pallet changer tool stations: 60, HSK 100 The complete equipment of the machine can be found in the .pdf file.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, CNC turning and milling center Okuma Multus B400 1SC-1500 Control system: OSP-P200L Year of manufacture: 11/2010 Internal machine number: 61 X-axis: 690 mm Y-axis: +115 / -115 = 230 mm Z-axis: 1,545 mm Dwodpfxozwl U Se Acyed B-axis: up to 225°, positioning in 0.001° C-axis: 360° / 0.001° Turning length: 1,500 mm Turning diameter: 710 mm Spindle bore: 110 mm Tool holder: HSK 63 Tool magazine: 40 positions Equipment: - Chip conveyor - 3-jaw chuck SMW KNCS-N-340-117 - Paper band filter system ISF 540/6670 - One Touch IGF - Tailstock - Touch setter

Condition: used, Year of construction: 1995, machine/vehicle number: .04503009, with CNC control, manufactured by OKUMA, type: OSP 7000 L, max. turning length: 1000 mm, max. turning diameter: 250 mm, with tool turret with 12 tool positions, all 12 tool positions suitable for driven tools, with filter system and chip conveyor. Djdpfez Nhrvjx Acyjwd

Condition: excellent (used), Year of construction: 2007, operating hours: 5,000 h, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, controller manufacturer: OSP200, rotational speed (max.): 8,000 rpm, operating hours of spindle: 5,000 h, number of slots in tool magazine: 32, Equipment: chip conveyor, 8,000 rpm OSP200, Fusion360 IGF Dedpfx Acozzbk Rsyjwd Coolant through spindle 4th axis Kitagawa 250mm Available immediately In very good condition

Condition: good (used), spindle bore: 260 mm, spindle speed (max.): 900 rpm, travel distance X-axis: 3,200 mm, total height: 3,409 mm, total length: 9,800 mm, total width: 3,609 mm, feed length Z-axis: 530 mm, overall weight: 34,000 kg, CNC Lathe with c-axis Okuma - LU-45M SuperBigBore MACH-ID 9778 Make: Okuma Type: LU-45M SuperBigBore Control: OSP-P200L X-Axis: 3200mm Z-Axis: 530mm Spindle bore:260mm Speedrange: 900Rpm Length: 9800mm Width: 3609mm Dwodpfx Acsztctqeyod Height: 3409mm Weight: 34000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC Turning and Milling Center Okuma LT 2000 EX -MY 2ST Control: OSP-P300L Year of manufacture: 2013 Internal machine no. 24 Swing diameter over bed: 400 mm Centre distance: 960 mm Turning diameter: 210 mm Spindle speed: 50 – 6,000 rpm Sub spindle speed: 50 – 6,000 rpm Travel paths: W-axis: 730 mm X-axis: 205 mm C-axis: 360 degrees (0.001°) 2 tool turrets, each with 16 stations (all stations driven) Dwjdoyvfhdepfx Acyjd Equipment: - Chip conveyor - Paper band filtration system with high-pressure pump - 2x 3-jaw chucks Kitagawa - OGL gantry loader, approx. 5 kg load capacity - 20-station stacking magazine - Touch setter - Renishaw probe - Extraction unit - Various accessories

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, Machine type: Horizontal machining center Manufacturer: OKUMA Type: MA-400HA Dwedpfxjzm U Ndj Acyod Year of manufacture: 2008 Control system: OSP P200M Country of origin: Japan Delivery time: short-term, by arrangement 4-axis machining center, high productivity, including various accessories Machine equipment: - ConSep chip conveyor system with high-pressure pump - Various software packages - Touchsetter with length measurement and breakage detection - Work area shower Technical details: - Travels - Axes X-axis (column right-left) mm 560 Z-axis (table forward-backward) mm 625 Y-axis (spindle up-down) mm 610 B-axis 1° 0 - 360° - Number of pallets: 2 (pallet changer for 2 pallets) - Pallet size (mm): 400 x 400 - Max. pallet load capacity (kg): 400 - Max. pallet workpiece dimensions (mm): 500/600 x 710 - Spindle speed (rpm): 15,000 - Main spindle (10min/cont): 22/18.5 kW - Tool holder: BT40 - Tool magazine: 60 positions Optional: - Transport organization and execution - Machine delivery and installation - Machine commissioning

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 0537, CNC: OSP-U100L X-axis: 1050 mm Y-axis: 560 mm Dwsdjxlta Espfx Acyed Z-axis: 460 mm Table size: 1300 x 560 mm Number of tool pockets: 32 Spindle taper: BT50 Max spindle speed: 12,000 rpm Spindle motor power: 15 kW Machine dimensions: H=3200 x W=3000 x L=3400 mm Machine weight: 8,000 kg.

Condition: good (used), Year of construction: 2004, functionality: fully functional, CNC turning and milling center with 9 CNC axes, Okuma MacTurn 350 W, Year of manufacture 2004, OSP-E 100L, Additional magazine, Magazine with 80 tool positions, Main spindle with C-axis, Counter spindle with C-axis, Y-axis slide at the top / milling spindle, HSK 63 tool holder, Stepless B-axis as milling spindle, Distance between centers 1500 mm, Spindle bore 80 mm, Max. turning diameter 550 mm, Turning diameter 350 mm, Turret at the bottom with 12 tool positions and driven tools, Interlite compact filter system 900 l, Extraction system, Dsdpoz Dgudefx Acyswd Spindle operating time approximately 18,300 hours, Chip conveyor, Tool changer gripper arm completely renewed, High-pressure coolant, Coordinate measuring machine (CMM) measuring arm, Tool changer overhauled, Main spindle Kitagawa B - 210, Counter spindle Kitagawa B - 208.

Condition: excellent (used), Year of construction: 2017, CNC Lathe Okuma LB 4000 EX II – M C750 Control: OSP-P300LA Year of manufacture: 2017 Internal machine no.: 22 Dodpsyk Uimjfx Acyowd Turning length: 750 mm Turning diameter: 430 mm Swing diameter over bed: Ø 670 mm Swing diameter over carriage: Ø 480 mm Spindle speed: 42 – 4,200 rpm Tool turret: V12 (all stations driven) Equipment: Chip conveyor Touch setter OneTouch IGF 3-jaw chuck Tailstock

Condition: used, Year of construction: 2014, Technical details: x-travel: 760 mm Dwodpsxrwpdjfx Acysd y-travel: 760 mm z-travel: 760 mm b-axis: 360.000 x 0.001 ° spindle drive: 26 / 18,5 (40% / 100%) kW spindle turning speed range: 50 - 15000 U/min Tool bore: KSK-A63 max. table loading capacity: 500 kg total power requirement: 43 kW weight of the machine ca.: 11,5 t dimensions of the machine ca.: 2,7 x 4,73 x 2,87 m

Condition: excellent (used), Year of construction: 2014, turning length: 700 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, total height: 2,800 mm, total length: 6,000 mm, total width: 3,900 mm, overall weight: 9,800 kg, Complete machining with twin spindel, upper and lower turrets Kitagawa 3 chuck left and right Tool holders with driven tools axial and radial Large jaws cabinet with inserts OGL Gantry loader with ca 10 Kg load capacity Chip conveyor Paper Filtration Pressure Tank Max. turning Ø: 400mm X-Axis: 205mm Z-Axis: 700mm Spindle bore: 62mm Speedrange: 6000Rpm Spindle power: 22kW Subspindle speeds: 6000Rpm Subspindle bore: 62mm Subspindle power: 15kW Dwedpfx Acjyn Em Reyjd ATC / revolver: 16 Speed live tools: 6000Rpm Positions lower revolver:16 Speed live tools: 6000Rpm Power live tools: 7kW Chip conveyor: yes Tool eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!