Used Oil Water Separation Systems for sale (43,591)

Year of construction: 2025, condition: new, functionality: fully functional, New device 12 months warranty Benefits of chilled ice water: + Consistently low discharge water temperatures + Precise year-round dough temperature control + Rapid swelling during mixing without ice + Smoother doughs thanks to freshly chilled, liquid ice water + Exact dosing possible via water mixing and dosing unit + Water-carrying parts are made of stainless steel and are maintenance-free Kledsivdv Depfx Aalsp + Hygienically flawless, clean drinking water Langheinz ice water systems feature: + Consistently low water temperatures + High-performance refrigeration units + Cooling systems with expansion valve + Electronic ice bank controller + Stainless steel cooling evaporators + Multi-stage stainless steel water heat exchangers + Insulated stainless steel ice water tank + Drain cock in ice water tank + High flow rate + Compact dimensions + Easy-care surface structure + Low energy consumption SPECIAL accessories, optionally available at extra charge: - 3-way switching valves --- For water mixing and dosing units with only 2 inlets (cold / hot) + €349 net Technical data: - Batch size (recommended): up to 70 liters - Continuous output*: 230 liters / hr - Peak cooling output*: 500 liters / hr - Ice bank: 60 kg - Cooling capacity (CECOMAF): 3.978 kW - Electrical connection: 400 V - 50Hz - 1Ph - Power consumption: 2.84 kW - Water connection: 1/2 inch - Water flow at 2 bar: 25 liters / min - Dimensions: 1170 x 630 x 770 mm (LxWxH) - Net weight: 145 kg - Energy consumption at 100 liters: 1.5 - 2.5 kWh * at +17.5°C inlet and +2.5°C outlet

Condition: like new (used), Year of construction: 2015, functionality: unexamined, overall weight: 100 kg, type of input current: AC, Two oil mist separators for sale Kodpfx Asw Izpuoalslp

Condition: like new (used), Year of construction: 2022, operating hours: 2,600 h, functionality: fully functional, repeat accuracy: 0.02 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 200 mm, operating pressure: 4,000 bar, Waterjet cutting system by Perndorfer, year 2022, with approx. 2,600 operating hours for sale. Travel: 3050 mm x 1550 mm. 2 cutting heads with dynamic angle correction. Cutting tank made entirely of stainless steel. Includes auger for slurry removal. Includes high-performance drilling unit with 18,000 rpm. Laser pointer; water level regulation. Includes device for cleaning water surface/support during plastic cutting. High-pressure pump 'Servo-Jet-4000' max. 4000 bar at 8.5 liters/min. Includes 3 Lantek Expert Cut licenses incl. postprocessor. Kjdpfx Aexy Symealslp

Condition: new, Efficient extraction of cooling and lubricating fluids directly at the machining center The two standard units, AL-KO OIL JET 600 and OIL JET 1200, are the ideal solution for direct extraction of oil and emulsion mist from all common turning, grinding, and milling machines. Kodpfx Aewwt Tlealolp Application areas: AL-KO OIL JET units are used wherever oil and emulsion mist generated during the machining process needs to be directly extracted from the workspace of modern metal-cutting machines. Depending on workspace size, operating time, and the type of coolant used, either the OIL JET 600 or the more powerful OIL JET 1200 is selected. AL-KO OIL JET units are compatible with all standard coolants and lubricants and are installed directly onto the machine tool or positioned alongside on an optional mounting column. Functionality: The highly efficient filter system of AL-KO OIL JET units features, as standard, a three-stage filtration process that removes emulsion content and material particles from the extracted air. 1st stage: Washable metal mesh filter 2nd stage: Filter mat (LoTex®) with frame 3rd stage: Main filter cassette (ePM1 80%) The first stage separates coarse particles. The second stage, made from a nanocoated, drained mat, separates and channels away emulsion content. The third stage filters out the finest residual particles. Emulsion collected mainly in the second filter stage is gathered in the lower part of the unit and can be drained off. Applications: - Lathes - Machine tools - Metal-cutting machines Advantages: - Compact design - High separation efficiency thanks to three-stage filtration - Energy-efficient EC motors - Simple, tool-free filter replacement - Numerous options

Year of construction: 2025, condition: as good as new (ex-display), ENR 008 – Air-cooled Chiller Cooling capacity: 7.9 kW at supply/return temperatures of 7/12°C and an ambient temperature of 35°C Compact design with coaxial evaporator for efficient heat transfer Internal P3 pump for reliable circulation of cooling water Buffer tank with 50 l water volume for short-term load balancing Speed-controlled fans for demand-based cooling and reduced energy consumption Control: compatible with common control systems, ideal for easy integration Klsdpfxsfy Ryko Aalep Suitable for smaller cooling applications, such as the plastics industry

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar Kjdpfx Aoxgumcoalelp

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting Kedpfxexgua Aj Aalolp 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: excellent (used), Year of construction: 2011, 1 x Oil Mist Extractor Absolent AB A mist 10C with HEPA filter Year of manufacture: 2011 Kedjtp Thbepfx Aaljlp In very good condition. The extraction unit can be inspected at our warehouse.

Condition: refurbished (used), Year of construction: 2006, operating hours: 28,852 h, functionality: fully functional, machine/vehicle number: 13006, High-Pressure Pump HYTRON 40.30 Manufacturer: Böhler, BHDT, BFT Year of manufacture: 2006, #13006 Operating hours: 28,852 h From previous ownership, fully serviced, inspected, and operational, Maximator JET certificate, new pulsation damper with TÜV (German Technical Inspection Association) certification! • Main motor drive power: 30 kW • Auxiliary unit oil/air cooler: 1.1 kW • Auxiliary unit booster pump: 0.46 kW • Flow rate: 3.4 l/min • Design pressure: 420 MPa • Max. operating pressure: 400 MPa • Continuous operating pressure: 380 MPa • Pulsation damper: 2.5 l • Oil tank volume: 140 l • Ambient temperature for oil/air cooler: 10–35°C • Width x Depth x Height: 1,900 x 970 x 1,520 mm • Weight: 1,250 kg • Max. sound level: 78 dB(A) • Pressure and flow rate-controlled drive hydraulics • Oil-air heat exchanger • Pulsation damper • Primary and secondary filter units Kjdpoxfilkofx Aalolp • Infinitely variable pressure adjustment from 50 to 400 MPa • Alphanumeric display with event log • Pressure relief valve • Water booster pump • Setpoint display for operating pressure • Noise reduction enclosure Price ex Schweinfurt plus VAT: €16,000 Additionally: • Transport • One-day training for up to 4 people in Schweinfurt, or optionally at customer site • Installation and commissioning

Condition: good (used), Year of construction: 2010, 271 USED Heuft Thermal Oil Ovens, Vulkan model + Concord loading/unloading system. Year of manufacture: 2010. EQUIPMENT: - 4 VTR ovens, 12.8 m² each, totaling 50 m², - 1 trolley oven for 3 trolleys, 80x60, 8 levels, - Concord loading/unloading system, - dough loading station, - automatic bread unloading station (after baking), - conveyor belt for transporting bread to packaging, - 6 proofing trolleys and plates, - 12 baking trolleys, - HK 400 heating boiler, - thermal oil system, - heating oil, - set designs. Paid options available: transport of the device. Kjdpfxeydfzgs Aaljlp The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, rack oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Year of construction: 2022, condition: like new (used), Millipore Milli-Q ultrapure water system IQ 7000. Without cartridges. With MilliQ Q-Pod. Unused. Includes functional warranty. Klodpfx Aajwutuqjlop

Condition: good (used), water pressure: 1,500 bar, Aquablast DUO surface cleaner. Clean, demolish, and strip surfaces with high-pressure water. Clean, strip, remove, demolish, and roughen The Aquablast offers numerous applications for every surface. Different results are achieved depending on the pressure and flow rate. Applications range from thorough surface cleaning to targeted removal of solids. Kledpfx Aaov S Ep Aoljp

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,200 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, pressure: 4,000 bar, TECHNICAL DETAILS Working area: 2,000 × 3,000 mm Operating system: Windows 10 Pro (64-bit) High-pressure pump (ECOTRON® 40.37) Flow rate: 3.8 l/min Operating pressure: 400 MPa Oil capacity: 130 l Temperature range: 10 – 35 °C Water consumption: 10 l/min Abrasive dosing system (ALLFI) Tank capacity: approx. 1,400 kg Flow rate: 2 kg/min Weight: 1,500 kg MACHINE DETAILS Dimensions (L × W × H): 1,800 × 800 × 1,150 mm Weight: 1,000 kg Pump operating hours: 1,200 h Electrical connection Connection: 400 V Klsdpowcqi Ujfx Aaljp Total power requirement: 37.0 kW

Year of construction: 2017, condition: new, machine/vehicle number: 1C330966, Oil/water separator DONALDSON Ultrasep Superplus UFS-SP10Nominal compressor capacity (referred to 1 bar absolute and 20 °C, depending on compressor type and lubricant): 250 m³/h connection: G 1" Volume of the container: 50 litres Klodjdbwf Iepfx Aalep Volume of the preadsorber: 3,2 litres Volume of eff. Activated carbon adsorber: 8 litres

Condition: good (used), Motor : 1.5 kW Quantity : 2 pieces Price/ piece Klodpfx Aohc Sypealep

Condition: like new (used), Year of construction: 2020, Max. airflow 840 m³/h Connection diameter 200 mm Drive power 0.55 kW Kledpfx Ajwmlgcealsp Very little used, 2 units available

Year of construction: 2019, condition: new, machine/vehicle number: 1C331151, Oil/water separator DONALDSON Ultrasep Superplus UFS-SP10Nominal compressor capacity (referred to 1 bar absolute and 20 °C, depending on compressor type and lubricant): 120 m³/h Connection: G 1/2 Volume of the container: 25 litres Volume of the preadsorber: 0,9 litres Volume of eff. Activated carbon adsorber: 3,2 litres Klsdpfx Aedbwf Soalep

Condition: good (used), Year of construction: 2017, operating hours: 5,850 h, functionality: fully functional, TECHNICAL DETAILS Cutting sand: 6 t Kodpew T Rxpefx Aalelp MACHINE DETAILS EQUIPMENT - Accessories - Spare parts - Wear parts

Year of construction: 2008, condition: used, functionality: fully functional, Unit was used for grinding oil cleaning for carbide machining. Eckert cooling unit 3 filter towers with sludge bag Filter capacity 80-100 l/min. Klodpfx Ajlczcwjalsp Filter fineness 3-5 µm In the description the unit is described with sludge drum, technical data are similar. Original instructions available in paper form Videos available on request.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Technical data: Operating pressure: 6 - 10 bar dry filtered air Kedou Rb D Rspfx Aalslp Compressed air connection: ø 10 - 12 mm Maximum delivery pressure: 5 bar Delivery volume: 60 kg/h Sand types Dry garnet sand 60 - 200 Mesch Compressed air consumption Max. 0.5 m3 /h at operating pressure 4 bar Weight: 200 kg (empty) Electrical connection AC 240 V / 50 Hz / max. 20 A Dimensions H2350, B860, T610

Year of construction: 1993, condition: used, Dust extraction , water extraction vacuum filter, separator for grinding, polishing, cutting, brushing, deburring stone, plaster, aluminum and metals . The ideal filter for extracting and filtering dust that does not allow the use of traditional cartridge or bag filters, ensuring reduced maintenance costs. It is ideal for cutting , grinding , brushing and polishing departments. Klodjtixlbjpfx Aalop The unit is made of stainless steel. The extractor is suitable for outdoor installation thanks to a built-in heater that prevents water from freezing. Brand: Venti Oelde Model: RWA 400 15 Kw fan. Capacity - 8000 m3/h year of production : 1993 Inlet diameter - 400 mm Control cabinet with technical documentation included.

Condition: good (used), functionality: fully functional, Year of construction: 2002, • 4 new EDI cells MK3 are available. • 7 EDI stations, each with 4 EDI cells MK3, will be dismantled. Ksdpfjwy Uu Aex Aaljlp

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 2,400 mm, total length: 15,000 mm, total height: 2,800 mm, pressure: 8 bar, power: 10.9 kW (14.82 HP), empty load weight: 6,400 kg, input voltage: 400 V, filling weight (min.): 200 g, filling weight (max.): 5,000 g, XFR 1000 Liquid Media Filling Line A fully automated liquid media filling line featuring robotic capping, automated handle placement, dual-sided labelling, optical quality control, and pallet wrapping. An end-to-end solution covering the entire process, from bottle blowing to the palletizing and wrapping of filled bottles. XFR LIQUILOAD It enables optimal filling speeds for bottles of varying characteristics and liquids of different viscosities. The machine’s easy configuration for different bottle types and corresponding liquids ensures quick adaptation to market demands. • Capability to increase the number of nozzles • Nozzles designed to prevent foaming of the liquid • 800 to 4,000 filled bottles per hour • Servo-driven nozzle positioning Klsdeuq Nv Tjpfx Aalop • Easy configuration of new programs XFR BOTTLELOCK The machine segment performs fully automated capping of filled bottles. Designed to accommodate various cap types, simplifying machine adjustments for seamless operation. • Cap type adaptability • Robotic bottle capping • Optical inspection • 800 to 2,000 capped bottles per hour XFR HANDLEGRIP The automatic robotic placement of handles on bottles, while they move continuously towards the labeling machine, ensures seamless and uninterrupted operation. • Adaptability to different handle types • Robotic handle application on bottles • Optical inspection for handle orientation verification • Capability to attach handles with a funnel XFR LABELFLOW The machine applies the appropriate labels to both sides of the bottle, creating a finished appearance. In the next phase, the labelled bottles undergo optical inspection. • HERMA labelling system • Simplified label type changeover • Servo-driven for enhanced labeling precision • Monitoring of remaining labels with operator alerts OPTIONAL PARTS: 1. OPTICAL INSPECTION Industrial cameras with integrated lighting and pneumatic ejection system. 2. PICK AND PLACE ROBOT 6-axis robot equipped with a 160 kg gripper for the current handling of 8 bottles onto a Euro pallet. 3. PALLETIZING Palletizer with automatic pallet feeding via a roller conveyor to the bottle stacking area. 4. PALLET WRAPPING The automatic pallet wrapper applies stretch film to palletized products, securing them for easier and safer transport. 5. FINISHED GOODS STORAGE Finished pallets are transported to the warehouse via a metal roller conveyor. 6. REMOTE CUSTOMER SUPPORT We provide remote support to ensure optimal machine performance. 7. ADDITIONAL OPTIONS Automated data integration with ERP systems; RFID login; NFC detection of parts and tools; magnetically mounted tools. 8. MACHINE CONFIGURATION Segments can operate independently or as an integrated solution, depending on the client's specific needs. Proton EE-Elektronika d.o.o. MachinFlex d.o.o.

Condition: new, Year of construction: 2025, We produce and install complete plants for water and juice , still or carbonated. The complete line consists of : bottle blowing machine, automated feeding PET , compact washing , filling and capping machine. Each capping machine has automated cap feeder and sterilization station for caps. We provide high productivity filters and CIP automated hygienisation station. Ksdpfou Nad Tjx Aalelp As option we can add the carbonated station completed with chiller and heat exchange unit. After bottles are filled we install X ray machine for inspection, oven for increasing liquid temperature, water blowing machine to clean the bottles, labeling machine, date and lot machine, bottle case packing machine, palletising unit, stretch film machine to hold pallets.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 400 kW (543.85 HP), Ore Beneficiation Plant for Nickel, Copper, Zinc, Graphite, Gold, Silver, Chrome, Quartz/Silica In today’s competitive mining and metallurgical industry, maximizing ore value is critical. Our state-of-the-art Ore Beneficiation Plant offers a complete solution designed to increase the content and quality of raw ore, transforming it into a marketable product ready for further processing or direct sale. Engineered for a wide range of minerals—including nickel, copper, zinc, graphite, gold, silver, chrome, and quartz/silica—our ore beneficiation plant delivers exceptional performance, efficiency, and reliability. Introduction Mining operations around the world face the challenge of processing ores that are often low in grade and require extensive refinement to be economically viable. Beneficiation—the process of increasing the concentration of valuable minerals—plays a vital role in reducing operational costs, enhancing recovery, and ultimately, ensuring profitability. Our ore beneficiation plant, also known as an ore processing plant or mine dressing plant, integrates advanced technology and robust engineering to deliver an efficient crushing, grinding, classifying, and separation process. Kjdeq Nw Uqopfx Aalslp Designed to handle a wide variety of ores, our plant is the ideal solution for mining companies looking to optimize their extraction and processing operations. Whether you’re processing nickel, copper, zinc, graphite, gold, silver, chrome, or quartz/silica, our plant provides the versatility and performance needed to meet today’s rigorous industrial standards. ## What Is an Ore Beneficiation Plant? An ore beneficiation plant is a facility where raw ore is processed to improve its quality and increase the concentration of valuable minerals. The plant typically includes several stages of processing: 1. Crushing: The raw ore is reduced in size to allow for more efficient downstream processing. 2. Grinding: Further size reduction to liberate the valuable minerals from the waste material. 3. Classifying: Separation of the ore into different size fractions using screening and hydrocyclones. 4. Separation: Employing various physical processes such as magnetic separation, flotation, or gravity separation to concentrate the valuable minerals. 5. Dewatering: Removal of excess water to prepare the concentrate for further processing or shipping. This integrated process not only boosts the metal content but also minimizes waste, thereby improving overall cost efficiency and environmental sustainability.