Used Oce Plotwave 300 for sale (13,133)

Condition: excellent (used), CATALOG NO. 6985 TECHNICAL DATA - Max workpiece width: 300 mm - Max workpiece height: 200 mm - Unit: grooved rubber roller + pad + metal roller - Working table: 1230x440 mm - Belt: 300x1900 mm From above: - Rubber slip roller - Unit approx. 7.5 kW - Rubber slip roller From below: - Traction belt - Pneumatic oscillation - 2 feed speeds - Feed motor 0.85 kW - Extraction port diameter: 110 mm - Dimensions (L/W/H): 1250/1000/1950 mm - Weight: 530 kg Blsdpfx Acezw Dvbo Tel - Not painted - Used sander - Very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of greater exchange rate fluctuations, the price may change)

Condition: used, 2x KWB Powerfire TDS 300 Wood Chip Boilers – approx. 600 kW For sale are two KWB Powerfire TDS 300 wood chip boilers, which were operated together in a cascade system. 👉 Total output: approx. 600 kW — Technical Highlights: • Rotary grate combustion system – robust, self-cleaning • Cyclone combustion chamber – clean combustion, low emissions • Lambda control – optimal efficiency • Fully automatic output modulation • Automatic heat exchanger cleaning • KWB Comfort 3 control system • Suitable for both wood chips and pellets — Advantages of the Cascade System: • Flexible performance adjustment as required • Very efficient in partial load operation • Each boiler can be operated independently • Redundancy / operational reliability — Scope of Supply: ✔ Includes feed auger on both boilers (ca. 1 m screw conveyor with drive motor, mounted directly on the boiler – feeds fuel directly into the combustion chamber) Bledpfx Acsy A Ewto Tol ⚠️ Note: No discharge / conveying system (fuel extraction from store) → available on request at additional cost — 📍 Location: Mosonmagyaróvár, Hungary 👉 approx. 80 km from Vienna 👉 approx. 35 km from Parndorf TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology. Our 1,500 m² warehouse in Mosonmagyaróvár, Hungary, maintains a permanent stock of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major city after the Austrian-Hungarian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log gasification boilers • Log boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heating units • Industrial heaters • Buffer tanks • Heat exchangers • Screw conveyors • Fuel extraction systems • Burners • Pumps • A comprehensive range of heating accessories ⚙️ Accessories and Components: We also offer a broad range of accessories, including circulation pumps, plate heat exchangers, and many other components for private to industrial applications. 🏭 Brands in our portfolio: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: Most of our current offers can be found on our website: topheatingsystems.com We also have additional equipment in stock that is not yet listed online. 📅 Inspection: Viewing at our warehouse is possible by appointment. If interested, please contact us – we look forward to helping you find the right solution.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, collet bore: 38 mm, turning diameter over cross slide: 60 mm, spindle bore: 38 mm, feed length X-axis: 300 mm, feed length Z-axis: 286 mm, spindle speed (max.): 6,000 rpm, overall weight: 1,900 kg, Precision lathe DMG MORI WASINO G 100 / 300 Year of manufacture: 2017 Control system: Fanuc (DMG Compact line) Travel distances: X-axis: 300mm Z-axis: 285mm Main spindle speed: 0 - 6,000 rpm Bar diameter: 38mm Accessories: - Electronic handwheel - Coolant system - Fire extinguisher - 3x driven tool holders Bedpezwcqwefx Ac Tjll Machine has only been operated under oil lubrication. Accuracy as when delivered!

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand large-format system/plotter, the “Oce ColorWave 3500” Item for sale: 1 x Oce ColorWave 3500 Meter readings: Total: Approx. 1,850 m² Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order. A test print can be seen in the photo. Packaging and dispatch: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Blsdozvpl Sspfx Ac Tjl Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used black-and-white production system, the Canon/Océ VarioPrint 6330 Titan. Item for sale: 1 x Canon VarioPrint 6330 Titan with the following features: Includes 2x paper decks Includes large-capacity stacker Meter readings: Total: approx. 35,187,549 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! Blodpfx Acoylt U Dj Tol A functionality test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: excellent (used), CATALOG NO. 7227 TECHNICAL DATA - Working width: 40 – 300 mm - Material thickness: 10 – 35 mm - Min. material length: 270 mm - Max. material length: unlimited - Max. feed speed: 90 m/min - Feed speed steplessly adjustable via inverter from control panel - Cutting speed: 24 m/min - Milling motor power: 2x 4 kW - Milling spindle speed: 7,500 rpm - Feed motor power: 0.75 kW - Pneumatic top and side pressure - Spindle diameter: 40 mm - Motor-driven infeed roller conveyor, length 1,130 mm - Manual / automatic operation - PLC controller with touchscreen for easy operation - Compressed air connection: 8 bar - Extraction outlet diameter: 150 mm - Dimensions (L/W/H): 2,550 x 1,200 x 1,400 mm - Weight: 1,100 kg ADVANTAGES – German manufacturing – Operating and maintenance documentation (DTR) – Machine for tongue and groove profiling – Set includes complete cutter and head set – Motor-driven infeed roller conveyor – Unpainted – Used machine, in very good condition Net price: 107,900 PLN Net price: 25,690 EUR (according to exchange rate 4.2 EUR/PLN) (Prices may vary depending on currency fluctuations) Bsdpfx Aozrvccsc Tsll

Condition: good (used), Renz Autobind AB 500 HS + KAS-300 Semi-Automatic Spiral Binding Machine Machine in very good condition, ready to operate. Made in Germany. Efficient semi-automatic machine for the production of calendars, notebooks, and other metal spiral-bound products. Fast operation Blsdpfxjzur Efo Ac Tel Spiral diameters range from 3/16″ to 1 1/8″ Working width up to 500 mm Crimping thickness approx. 23 mm Cycle capacity up to 2000 cycles/hour The semi-automatic machine unwinds the spiral from the spool, counts the stitches, cuts the spiral to the pre-set stitch count, and transfers the spiral section to the crimping area. The operator places the pre-perforated calendar on the table. The calendar is automatically transferred to the crimping area by pressing the pedal. The machine then automatically deposits the entire binding onto the outfeed conveyor. The machine includes a Renz KAS-300 hanger feeder, a CB-120HS outfeed conveyor, tools, and documentation. Power supply: 230V + compressed air. Weight: 250kg.

Condition: good (used), Year of construction: 2008, machine/vehicle number: 3514, functionality: fully functional, power: 25 kW (33.99 HP), input voltage: 400 V, total length: 5,000 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 3,000 kg, KOCH CKT-300 Granulate Drying System - including piping and 6 associated containers Note: The item must be picked up on a fixed date between September 1st and September 3rd, 2026; the exact date will be confirmed. Blsdpfx Acezvl H So Tsl FCA D-58507 Lüdenscheid - loaded onto a truck.

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, volume flow: 300 m³/h, input voltage: 400 V, input frequency: 50 Hz, Vacuum pump PVR EU 300B PVR vacuum pump Bljdpfx Aszwu R Aoc Tel Type EU 300B Capacity 300 m³/h Absolute pressure 10 mbar Year of manufacture 2004 Price € 3500

Condition: like new (used), Year of construction: 2023, functionality: fully functional, input voltage: 400 V, open-circuit voltage: 87 V, welding current at 60% duty cycle: 270 A, welding current at 100% duty cycle: 220 A, input current: 25 A, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 300 A, input frequency: 60 Hz, We are offering this as-new EWM Tetrix XQ 300 puls AC/DC Expert 3.0 5POL welding machine, year of manufacture 2023. Including Cool XQ 41-1 cooling module Mains voltage: 380–400 V Mains frequency: 50/60 Hz Rated current I1,max: 24.9 A Rated current I1,eff: 15.5 A Open-circuit voltage (U0): 87 V MIG/MAG welding current range: 3–300 A MIG/MAG welding voltage: 10.1–22.0 V MIG/MAG duty cycle 40%: 300 A MIG/MAG voltage at 40% duty cycle: 22.0 V MIG/MAG duty cycle 60%: 270 A MIG/MAG voltage at 60% duty cycle: 20.8 V MIG/MAG duty cycle 100%: 220 A MIG/MAG voltage at 100% duty cycle: 18.8 V Manual arc welding current range: 5–300 A Manual arc welding voltage: 20.2–32.0 V Manual arc welding duty cycle 30%: 300 A Manual arc welding voltage at 30% duty cycle: 32.0 V Manual arc welding duty cycle 60%: 260 A Bjdsy Sxkfepfx Ac Tjll Manual arc welding voltage at 60% duty cycle: 30.4 V Manual arc welding duty cycle 100%: 210 A Manual arc welding voltage at 100% duty cycle: 28.4 V Protection class: IP23 Year of manufacture: 2023 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2021, Canon Varioprint 6180 Titan Includes C53 controller. Total print count: 17 million. Currently available. All of the aforementioned equipment is not for sale or resale in Russia, or in any country subject to an EU embargo. Bljdpewutchefx Ac Tel

Condition: used, Year of construction: 2014, turning diameter: 340 mm, turning length: 2,000 mm, total length: 4,270 mm, total width: 2,130 mm, total height: 1,840 mm, overall weight: 3,900 kg, 2-Axis Teach-In / Cycle controlled CNC Lathe CNC Control Fagor 8055 I Power TC Turning diameter 340/570 mm Bsdpfx Acszv Sdks Tsll Turning length 2000 mm Center height 275 mm Spindle bore diameter 108 mm Spindle nose D 1-8 Spindle speed 0-2.500 R/min Movement X-axis 310 mm Movement Z-axis 2000 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 1995, saw blade diameter 315 mm cutting diameter 100 mm Blsdpfx Acozxt Nme Tjl cutting speed 40 / 80 U/min total power requirement 1,2 kW weight of the machine ca. 0,3 t dimensions of the machine ca. 0,8 x 0,6 x 1,65 m

Condition: like new (used), 300 linear meters of Nedcon pallet racking New, see pictures! A top-quality racking system from the renowned manufacturer NEDCON – a subsidiary of Voestalpine AG with headquarters in the Netherlands. Height: 6.5 m Depth: 110 cm, blue Beam length: 2.7 m, orange Beam capacity/bay: 3050 kg Negotiable price: €50,280.00 net ex warehouse Offer includes: + 108 pcs. pre-assembled frames, depth 110 cm, height 6.5 m + 642 pcs. beams, length 2.7 m, 3050 kg capacity/bay + 1284 pcs. safety locking devices + 216 pcs. concrete anchors Load capacity labels, documents, etc. are, of course, included. Further accessories can be found in the accessories catalog. Frames: blue RAL 5019, infill panels: galvanized. Heights from 2 m to 7 m in stock. Bay load: 12 tons, higher bay loads available upon request. Beams: orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. Transport and assembly are available upon request. Other configurations available upon request. Over 2000 meters available. Inspection possible at any time by appointment. Further information available upon request. Bsdpfxofi U Afe Ac Tjll We always have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse) Lenox Trading – Top used & new storage technology & heavy-duty racking Description: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking available for immediate delivery • 20,000 m² of mezzanine floors & steel platform structures immediately available • 30–50 semi-trailer loads of goods handled weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance orders, we offer a comprehensive, worry-free package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock, including thorough clearance. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full-service approach with our own employees: Cataloging, office preparation, inspection, goods delivery, logistics, dismantling, and thorough handover. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking/heavy-duty racking systems, we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, functionality: fully functional, With this offer, you are purchasing a used black-and-white production system, the “OCE VarioPrint 6180 Titan.” Items for Sale: 1x OCE VarioPrint 6180 Titan with the following features: Includes 2x HC52 finishers Includes 3x Pims paper decks Meter readings: Total: Approx. 39,188,579 pages Condition: Bjdpfxjzqnb Uj Ac Tell This listing is for a used device that may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping available upon request! A functional test will be recorded on video for you before shipping or pickup. For more information, please feel free to contact us directly.

Condition: used, Year of construction: 2010, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, total height: 3,260 mm, total length: 2,580 mm, total width: 1,115 mm, We offer this used CORAL EUROFILTER 300 dust extractor, year of construction 2010. Article: EUROFILTER 300 Serial number: 202 Voltage: 400/690 V Frequency: 50 Hz Power: 7.5 kW Rated speed: 2800 RPM Inlet dia of 300mm inlet of the rotary 280mm Automatic cleaning: yes Manual removal/cleaning of filters: only periodically, mainly for inspection or replacement Bodpfx Acoygxbfs Tjll The machine is operational and available. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Precision surface grinding machine Degen Type FSH 300 with digital display Technical data and features: >> Manufacturer's serial no. 1379, year of manufacture 2008 >> Max. grinding length 300 mm >> Max. grinding width 160 mm >> Working height with new/worn grinding wheel 240/290 mm >> Electrically operated magnetic clamping table 300 x 150 mm x 80 mm Blodpfx Aezu Sn Hjc Tjl >> Total power requirement 4.6 kVA >> Space requirement: length 1.0 m x width 0.9 m x height 1.7 m >> Weight approx. 450 kg About the machine: Offered is a precision surface grinding machine from the German manufacturer Willy Degen, type FSH 300. A German-made product with high precision, an absolute top-quality machine. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Factory new – never installed! Weinig Hydromat 4300, high speed planer and moulder Feed speed 30-300 m/min Spindle 1 (Bottom) – Radial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer, fully automatic Spindle 2 (Top): – Radial and axial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer, fully automatic Spindle 3 (Right): – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic Spindle 4 (Left): – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic Bledozu Awrspfx Ac Tel Spindle 5 (Top): – Radial and axial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer + profile jointer fully automatic Spindle 6 (Bottom): – Table tops with wood inserts, maximum cutting height of 65 mm with a flange of 100 mm – Rotaplan pressure plate above the bottom shaft – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic – Hydro bearing with automatic locking General: – Horizontal CNC-controlled pressure rollers – CNC-controlled positioning input – Marathon Powercoating Plus – Automatic waxilit pump – Weinig WMC with touchscreen – Kickback protection for sawing operations – Machine with spindle and feed brakes – Safety and sound insulation housing

Condition: used, Year of construction: 2007, functionality: fully functional, Control system: MAZATROL 640M Travel range X / Y / Z: 1,740 mm / 760 mm / 660 mm Table dimensions: 2,000 x 760 mm Max. table load: 1,400 kg Blodpfx Acszxphrj Tel Distance spindle nose – table: 180 – 840 mm Spindle interface: SK40 / CAT 40 Spindle speed: 40 – 12,000 rpm Spindle power: 11 kW (continuous) / 15 kW (30 min) Tool magazine: 48 positions Max. tool dimensions: Ø 80 mm x 350 mm length (max. 8 kg) Rapid traverse rate (X / Y / Z): 36 m/min Machine weight: approx. 11,000 kg Footprint (L x W x H): approx. 4.50 x 3.50 x 3.10 m

Condition: used, microcontroller "Mikster" loading : max. 160L with vacuum pump 2,3 kW weight 380 kg Bjdozxq H Aepfx Ac Toll dimensions (l x w x h) : ± 1.320 x 1.380 x 1.540 mm adjustable speed from a wide variety of products like: all kinds of salads, meat and fish, can be mixed / tumbled with the Bartumb.

Condition: used, Year of construction: 2022, Milling machines Travel distance X: 610 mm Travel distance Y :355 mm Travel distance Z: 460 mm Number of axis: 3 milling machine / machining center Control: Siemens 828D ShopMill spindle revolutions: 10000 rpm Speed range to: 10000 U/min table size X: 700 mm table size Y: 350 mm max. workpiece weight: 350 kg tool changer: 16 - time spindle cooling chip conveyor control Siemens Siemens 828D ShopMill control X/Y/Z travels: 610 × 355 × 460 mm Spindle speed: 10,000 rpm 16-position tool changer Table size: 700 × 350 mm Bjdpfx Acszwktyj Tjll Max. table load: 350 kg Through-spindle coolant with 20-bar high-pressure pump Chip conveyor Electronic handwheel Renishaw TS27R tool measurement system Renishaw OMP40-2 touch probe RJ45 network connection

Condition: used, loading : 75 to 80 % with 2 arms Bledpfozxqpkex Ac Tol all stainless steel mobile 0,81 kW tiltable drum with working and waiting time dimensions (l x w x h) : ± 1.300 x 1.100 x 2.100 mm

Condition: good (used), Year of construction: 2016, cutting diameter 300 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: flat re 300 x 280 mm capacity 45 degrees: round re 300 mm capacity 60 degrees: flat re 190 x 200 mm capacity 60 degrees: round re 200 mm capacity 45 degrees: flat li 270 x 200 mm capacity 45 degrees: round li 270 mm Bljdjzv Ul Dspfx Ac Tsl turning speed range: 20 - 100 m/min saw band length 3660 x 27 x 0.9 mm power capacity 2.4 kW weight of the machine ca. 650 kg range L-W-H 2050 x 1170 x 1600 mm Current list price: approx. 15.000 euros Special price available upon request Features: - Semi-automatic electro-hydraulic band saw (INDUSTRIE) - Suitable for single-piece and small-batch production - Large, ball-bearing-mounted cast-iron turntable * For miter cuts from 45° left to 60° right - Hydraulic feed mechanism Material clamping - Ergonomic control panelâ??front right, swiveling - Coolant system - Operatoration manual * Semi-automatic work cycle: After the cycle starts, the vise closes automatically, the saw frame lowers for the cut and automatically raises back to the predefined starting position once the cut is complete. Afterward, the vise opens.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, empty load weight: 1,720 kg, operating speed: 10,700 mm/s, roller width: 2,200 mm, TECHNICAL DETAILS Rigid material Workpiece height: max. 50.8 mm Workpiece weight: max. 34 kg/m² Roll material Width: min. 900 mm – max. 2,200 mm Weight: max. 50 kg Bledpfx Acsxdiyfs Tol Diameter: max. 240 mm Maximum print speed: 64.2 m²/h (in express mode) MACHINE DETAILS Dimensions & Weight Dimensions: 3,080 × 2,500 mm Weight: 1,720 kg Note: The machine heads must be replaced. The seller can offer full service in this regard. The machine will be available from 02.12.2025!

Condition: used, Year of construction: 2021, Dust extraction system Manufacturer: Felder Type: RL 300 Year of manufacture: 2021 - Like new, never used - Technical data - Airflow rate: max. 6000 m3/h - Rated airflow rate at 20 m/s: 5090 m3/h - Negative pressure at the total connection at 20 m/s: 2680 Pa Bedpfx Acszv Tmmo Tsll - Dust extraction connection (can be mounted on the left or right): 300 mm - Filter area: 50 m2 - Sound pressure: 75 dB - Chip collection container (liters): 2 x 250 l Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.