Used Northern Climate Hall Heating for sale (18,231)

Condition: new, Year of construction: 2024, functionality: fully functional, Suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning Immediately ready for use - plug in and switch on Clean combustion - no chimney required very economical - fuel consumption approx. 4 l per day Can be controlled via app - set temperature, call up messages and fuel quantity directly on your smartphone Thermostat for automatic operation, setting range 0-40°C Dry heat - no condensation as with gas Mobile use thanks to 4 castors operated with biodiesel or diesel/red diesel low-noise - only 48 dB Isdpoqvlvmjfx Aacjbc no dust - no fan no exhaust fumes - does not emit a burning smell Compliance with the new EU emissions directive Automatic restart after power failure

Condition: good (used), Weiss Type: WK3-600/70 Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: Temperature range: -70°C to +180°C Temperature change rate: Heating: 4.0 K/min Cooling: 2.5 K/min Temperature deviation: Over time: ±0.1 to ±0.5 K Spatially: ±0.5 to ±1.5 K Heat compensation max.: 2,500 W Specifications for Climate Testing: Temperature range: +10 to +95 °C Dew point temperature range: -3 to +94°C Humidity range: 10 to 98 % rH Temperature deviation over time: ±0.1 to ±0.3 K Temperature deviation spatially: ±0.5 to ±1 K Humidity deviation over time: ±1 to ±3 % rH Temperature uniformity (spatial): ±0.5 to ±1.0 K Heat compensation max.: 500 W Test chamber volume: 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1,998 mm, Width 1,000 mm, Depth 1,745 mm Operating Data: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19.0 A Refrigerant: R404A & R23 Weight: 680 kg Important information for you as the buyer: The following points are carried out in advance on the chambers we offer: Iedpfx Ajw Inmmsacebc 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After a successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications subject to change. Errors and omissions excepted!) If you have any further questions, we are happy to answer them by phone.

Condition: good (used), functionality: fully functional, Year of construction: 2008, total length: 25,500 mm, load capacity: 20,000 kg, For sale is a complete crane system from Gloning Krantechnik. The system includes a crab trolley, a double-girder overhead crane bridge, the control unit, conductor rails, and guide rails if required. Dismantling is included in the price. The system is in very good and well-maintained condition, having been rarely used by the owner and serviced regularly. Powerful double-girder overhead travelling crane from Gloning Krantechnik – 20 t lifting capacity Technical data: • Location: Nuremberg • Capacity: 20,000 kg • Span: 25.5 m Iedpfx Aaew Tmkbocobc • Hook height: 11.5 m • Drive: Electric with radio remote control (type HBC) • Control: Contactor control with 400 V / 50 Hz mains connection • Crab trolley and hoist by SWF with stepless speed regulation • Dead weight: 14,690 kg • Ideal for heavy-duty applications in indoor facilities This crane is available immediately and is ideal for companies that rely on reliable lifting solutions in their production environments. Transport and loading can be organised Europe-wide for an additional charge on request. Prices are subject to VAT. Viewings are possible by appointment. Please contact us – our team will be glad to assist you. Trade-in or exchange possible! Machinery purchase / sale BUY / SELL OF PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality yet cost-effective metalworking machine for your production? Or do you wish to sell yours? For more information or to get in touch, please visit our website.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: CU 600.6, The expansion vessel is in very good condition. Sale only due to the refurbishment of our heating system! Ibsdpfx Aaowv T Nwecec

Condition: good (used), Year of construction: 2008, power: 700 kW (951.73 HP), heating capacity: 700 kW (951.73 HP), nominal heat output: 700 kW (951.73 HP), Mawera type FU700RIA, fully automatic wood chip heating system with underfeed combustion. Output: 700 kW. Hot water system, maximum flow temperature 95°C. Year of manufacture: 2008. Components: boiler body, combustion chamber and heat exchanger, screw conveyor, ash removal screw, ash separator, multicyclone, flue pipes for chimney connection, flue gas fan, operating manual, machine book, control system, control cabinet, chimney. Discharge: HSS only available upon separate request. Inspection on site in France possible. Good condition. Ibjdoxbualjpfx Aacsc

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, We are offering a boiler from the renowned company URBAS. The boiler has a heating capacity of 1.5 MW. The boiler is powered by biomass, bark, wood chips, and sawdust. Built in 2000. Ibjdoxl Elaepfx Aacjc Complete pump and valve unit. Boiler have VERTICAL HEATINGCHANGER, what make easier all cleaning work, asch fall down thru gravitation and stoppt nicht pipes The boiler is in operation until March/April 2026. It is possible to view the boiler in operation. The boiler is in excellent condition.

Condition: used, Year of construction: 2006, functionality: fully functional, overall weight: 3,500 kg, type of input current: three-phase, pressure: 6 bar, nominal heat output: 1,400 kW (1,903.47 HP), temperature: 105 °C, tank capacity: 2,040 l, fuel: domestic gas H, input frequency: 50 Hz, Equipment: type plate available, Viessmann VITOPLEX SX1 1400kw hot water boiler with WEISHAUPT G30/2A gas burner. Manufacturer: Viessmann VITOPLEX SX1 Year of construction: 2006 Nominal heat output: 1400 kW Boiler water content: 2040 liters Max. water pressure in the heating circuit: 6 bar Efficiency: 94% Maximum water temperature in the heating circuit: 105°C Nominal voltage: 230V 50Hz 6A Boiler control: Vitotronic 100 Fireplace pipe diameter: 300 mm Dimensions: Length: 2540 mm Width: 1380-1840 mm Iodpsudllvsfx Aacsbc Height: 1900 mm Weight: approx. 2500 kg Gas burner: Weishaupt G30/2A complete assembly. Version: ZM-LN Year of construction: 2007 Heat output: min. 300 - max. 1800 kW Connection pressure: min. 15- max. 500 Mbar Gas type: natural gas Gas control valve: DUNGS DMV-D 5065/11 Pressure switch: Dungs LGW 50 A2P Siemens SQM10.16532 Stellar Drive Leakage tester Dungs VPS-504 S04 with stuffing box Leak tester Dungs VPS-504 S04 Electric power: 6 kW Control voltage: 230 V 50 Hz 1 Phase Mains voltage: 400 V, 50 Hz, 3 Phase

Condition: excellent (used), Weiss Type: SC/KWT 450 Salt Spray Chamber Technical Data: Test chamber volume: 450 liters Ibedpfxow Hz Trs Aacoc Maximum load: 100 kg Brine reservoir: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Applications: Corrosion tests: Salt spray test: Ambient temperature up to +50°C Condensation water test: Ambient temperature up to +45°C Humidifier +75°C Temperature stability The temporal temperature deviation is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Standard climate (ventilation): DIN 50014 Weight: 180 kg Condition: used Scope of delivery: (See picture) (Subject to technical modifications and errors! All provided data are subject to change!) For further questions, please feel free to contact us by phone.

Year of construction: 1987, condition: excellent (used), machine/vehicle number: Abus 2to MM2, ABUS crane sky crane runway bridge crane indoor crane crane Payload / lifting load 2t - 2000KG, track about 2700mm External dimensions approx. 3100mm approx BJ 1987 with corridor control Overall height from top edge of crane to hook approx. 900mm Head carrier length without buffer approx. 2200mm Iedpfx Aeifyhheacsbc Crane is dismantled, stored and immediately available. Very good condition There are also pillar slewing cranes and wall slewing cranes Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by forwarding agency possible, please ask for postal code Collection preferred

Condition: used, mileage: 71,000 km, power: 355 kW (482.67 HP), first registration: 08/2024, overall weight: 18,000 kg, fuel type: diesel, color: green, axle configuration: 2 axles, next inspection (TÜV): 08/2026, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, DAF XF480 FT Low Deck Volume Tractor Unit ---- Nutzfahrzeuge Göppl GmbH - Authorized DAF Dealer ---- Used Vehicle Long Combination Vehicle (LCV) - Long HGV First Registration: 21.08.2024 Technical Inspection (TÜV): 08/2026 Safety Inspection (SP): 02/2027 Warranty: Plus: 3 years drivetrain – up to 500,000 km Financing: We are happy to arrange a competitive finance offer for you, subject to credit approval. Equipment: • Climate Package • Sleeper High Cab • Additional cab insulation • Roof spoiler • Side fenders • LED skylights • LED headlights and fog lights • Windshield with solar protection film • Roof hatch with electric operation • DAF Corner View • Dashboard design: Plateau • Driver’s seat: Luxury Air suspension • Passenger seat: Cinema style with fabric upholstery • Curtains with separating curtain • Luggage compartment • Lower bunk with XtraComfort mattress • Refrigerator • Automatic climate control • Integrated stationary air conditioning system • DAF Infotainment Luxury Plus • DAF Connect • Turn assist • Adaptive cruise control with FCW and AEBS-3 • ECAS remote control with extended functions • Engine: MX-13, 355 kW / 483 hp – EURO 6 • ECO Performance • Automated 12-speed TraXon transmission • MX engine brake • Full air suspension: 8.0 + 13.0 t • Axle load monitoring • Wheelbase: 3.80 m • Tires: Goodyear – Front: 315/60R22.5 Ibsdpfx Aaoxdgffscec – Rear: 295/60R22.5 • Rear axle ratio: 2.05 • Mechanical differential lock • Aluminum fuel tanks: 690 + 525 liters • Fifth wheel: SAF S36-20, 150+12 mm • Fifth wheel setting: 770 mm • Chassis guard • Power supply connection • Analog-controlled PTO prewiring (cable harness prepped) • Alternator: 130A, Batteries: 2 x 210Ah AGM • Battery energy monitoring • Dust guard Optional: • Fire extinguisher boxes • OBU installation • Tachograph calibration • CB radio • Power inverter ---- Nutzfahrzeuge Göppl GmbH Weiden - Regensburg - Leupoldsgrün - Bamberg - Nuremberg Authorized DAF Dealer – DAF Service Partner – FIAT Professional Service Partner Errors and interim sale excepted Sale to business customers only.

Condition: good (used), Year of construction: 2005, functionality: fully functional, power: 700 kW (951.73 HP), heating capacity: 700 kW (951.73 HP), nominal heat output: 700 kW (951.73 HP), Mawera Type FU700RIA, fully automatic wood chip heating system with underfeed combustion. Output: 700 kW. Hot water system, maximum flow temperature: 110°C. Year of manufacture: 2005. Components: boiler body, combustion chamber and heat exchanger, screw conveyor, ash removal screw, ash separator, multicyclone, flue pipes for chimney connection, flue gas fan, operating manual, machinery book, control system, switch cabinet, 5000 l buffer tank, all pumps on the heating side, with hydraulic SSt discharge with 2 push rods. Can be inspected on site in France. Good condition. Iodpjxbt U Uofx Aacebc

Condition: like new (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 4,000 mm, table width: 2,600 mm, table length: 4,000 mm, CLEAR Coat TOUGH Coat ProfiTech controll EPG Spint High Coat PEA-C4 with CoronaStar colour powder coating flat glass and laminating line for flat glass or other materials Glass size max.: Length 3600mm x width 2600mm. 90m long with installed 1100 kW power 2 tilting table, light handling crane, vertical washing machine, powder booth for coating flat material, demi water plant and so on Pos. 1 Loading Station with Glass Lift Pos. 2 Vertical Inlet Transport WM Ibodpfx Aaetwn Ipecec Pos. 3 Vertical Washing Machine with Drying Pos. 4 Vertical Inspection Transport with glass Activation Section Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection Pos. 6 Pre-Heating Section Pos. 7 Powder Section with Belt Cleaning Pos. 8 Cleaning Transport Pos. 9 Gel Oven Pos. 10 Alignment Oven Pos. 11 Laminator Pos. 12 Cure Oven Pos. 13 Cooling Section Pos. 14 Tilting Table with Vertical and Horizontal Transport Pos. 15 Vertical Inspection station Pos. 16 Unloading Station with Glass Lift Pos. 17 Electrical Distribution Pos. 18 Demi-water plant for the supply of the glass washing machine

Condition: like new (used), Year of construction: 2021, functionality: fully functional, overall weight: 90 kg, total length: 4,900 mm, type of input current: AC, input voltage: 230 V, fuel: domestic gas H, input frequency: 50 Hz, gas tube heater Solaronics TU.E 23 production year: 2020-22 heat output: 23kw gas burner + exhaust fan pipe length: 2x 4.9 meters G20.1 Nominal connection pressure: 25 mbar Nominal gas consumption: approx. 2.5 m3/h Gas connection: 1/2 " Ibodpfxjq Hu Afj Aacec Connection voltage: IP21 AC 230V 50Hz

Condition: used, Vötsch Model: VC 0018 Climate Test Chamber, Air-Cooled Test Chamber Dimensions: Width 580 x Depth 450 x Height 750 mm Ijdew Hz S Ujpfx Aacsbc External Dimensions: Width 865 x Depth 1150 x Height 1780 mm Test Chamber Volume: approx. 190 liters Specifications for Temperature Testing: Temperature Range: -10°C to +90°C Temperature Deviation at steady state, according to IEC 60068-3-5, depending on chamber temperature over time: ±0.1 to ±0.5 K spatial: ±0.5 to ±2.0 K Temperature Change Rate according to IEC 60068-3-5 Heating: 0.6 K/min Cooling: 0.3 K/min Heat compensation in the range +20°C to +50°C: 200 W Calibration Points: +4°C and +90°C Specifications for Climate Testing: Temperature Range: +10°C to +90°C Temperature Deviation at steady state, according to IEC 60068-3-5, depending on chamber temperature over time: ±0.1 to ±0.3 K spatial: ±0.5 to ±1.0 K Humidity Range: 10% to 98% RH Electrical Connection: Rated Voltage: 1/N/PE AC 230V ±10% 50Hz Rated Power: 1.7 kW Rated Current: 9.5 A (neutral conductor plug loaded), Schuko approx. connection cable: 3.5 m Protection: 16 A slow-blow, provided by the customer Weight: approx. 380 kg net Refrigerant: R 134A For your safety as a buyer, please note the following information! The following points are carried out on all climate chambers we offer prior to delivery: 1. Functional check and replacement of necessary components 2. If necessary, a refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and errors are excepted!) We are happy to answer any further questions you may have by phone.

Condition: good (used), 2 kW high-frequency inverter for soldering or joining Iodev N Nygspfx Aacsbc

Condition: good (used), operating hours: 75,383 h, Espec PR-3KP Environmental test chamber -20 to +100 °C Features: Manufacturer: Espec Type: PR-3KP Temperature range: -20 to +100 °C Humidity: 20 to 98 % rH Refrigerant R-404A:- CFC-free - ozone-friendly Operating hours: 75383 Iodpowbz Hhjfx Aacebc Dimensions: External dimensions: HxWxD= 1680 x 1050 x 1200 mm Chamber dimensions: HxWxD= 850 x 600 x 800 mm Further items in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: used, LED ceiling light TRILUX type Belviso C2 625 CDP LED 3900nw LED semi-recessed luminaire with CDP microprismatic cover. Louvre luminaires, ceiling luminaires, recessed ceiling luminaire Linear luminaire, high bay luminaire, high bay luminaire suitable for Odenwald ceiling System dimensions 625 x 625 mm Output 45 watts Mains connection 230 Volt, 50 Hz Light color neutral white Luminaire luminous flux 4000 lm Ibedpfsvbu Awjx Aacsc Color temperature 4000 K - Suitable for ceiling cut-outs 610 mm x 610 mm, installation depth 65 mm - Sturdy luminaire housing made of sheet steel - Glare-free plastic cover with microprismatic CDP surface - All-round, exclusive light framing - Very high-quality workmanship (net new price over EUR 500) Luminaire dimensions Length: 620 mm Width: 620 mm Lamp height: 72 mm Weight: approx. 8.9 kg Very good condition Used but without damage approx. 100 pieces available Price per piece

Year of construction: 2022, condition: as good as new (ex-display), Air handler with EC technology for hall air conditioning or heating, cooling capacity in combination with a chiller unit: 150 kW at 7/12°C, heating capacity 300 kW, airflow 20,000 m³/h, 4x500 mm air outlets, compact design. Ibedpfjfzrgysx Aacsc

Condition: good (used), We offer for sale a Heraeus heating and drying oven. Heraeus heating and drying oven manufacturer HERAEUS Type: 6200 condition: Used in good condition air mixing oven: up to 250°C Internal volume: 180 liters temperature controller and timer air mixing voltage: 2800watt 1 phase 230volt 50Hz 12.3A IP20 External housing: width 800 mm, length 890mm, height 810 mm. Ijdpfx Aevzqyfjacobc Internal dimensions: width 510 mm, length 550 mm, height 650 mm weight: 100kg

Condition: used, Weiss Iedpsw Hcttofx Aacjbc Type: WK1/1500/40 Weiss Climate Test Chamber, Air-Cooled with Humidity Control (converted to use refrigerant R-452a) Temperature range: -40°C to +180°C Cooling rate approx. 2.5 K/min, heating rate approx. 3.5 K/min Temporal temperature deviation at center of test space: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature range: +10°C to +95°C Humidity range: 10% to 98% r.H. Temporal temperature deviation at center of test space: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Heat compensation In the range of +25°C to +95°C, at a relative humidity up to 90%: 500 W Test chamber dimensions: Height: 950 mm, Width: 1100 mm, Depth: 1475 mm External dimensions: Height: 2005 mm, Width: 1300 mm, Depth: 2450 mm Test volume: approx. 1540 liters Test chamber lighting: Halogen bulb 12V, 50W Rated voltage: 3/NPEAC 400V ±10% 50Hz Rated power: 11.5 kW, Rated current: 22.0 A Fuse on site: 32A slow-blow Protection class (control cabinet and operator panel): IP 54 Refrigerant: R-452a Weight: 920 kg For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run, monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) If you have further questions, we will be happy to answer them by phone.

Condition: used, Universal Temperature Control Unit WEINREICH Type WTD 4 Temperature control unit with electric heating and connections for external cooling Serial No.: 11932217 Year of manufacture: 1993 Maximum temperature: 140°C Maximum operating overpressure: 6 bar Pump capacity: 30 l/min Tank volume: 4 liters Heating capacity: 4 kW Cooling capacity (heat exchanger): 15 kW Pump motor power: 0.37 kW Circulating water supply + return: G 3/8" Cooling water supply + return: G 3/8" Total power consumption: 4.4 kW Power supply: 380 Volt, 50 Hz, CEE plug - Tempering medium: water - Temperature control with actual and setpoint display STÖRK-TRONIC Type ST 96-35.02K - Water circulation pump: SPECK - An external cooling unit is required for cooling (the cooled water is supplied to the temperature control unit) - Mobile on 4 castors Dimensions (L x W x H): 620 x 260 x 670 mm Weight: 55 kg Ibsdog Rhx Uopfx Aacjc In good condition

Condition: used, Heraeus / Thermo Type: UT 6200 Heraeus / Thermo heating and drying oven Process control up to 300°C External housing: Depth 715 mm, Width 895 mm, Height 816 mm Internal dimensions: Depth 503 mm, Width 554 mm, Height 644 mm External diameter: Inlet/outlet connection 40 D Internal volume: 180 liters Steam chamber: 240 liters 1/PE AC, 230 Volt, 50 Hz, 12.0 A, 2.65 kW Ibodpfjw Euwzex Aacec Weight: 100 kg Type: UT 6200 Condition: used Scope of delivery: (see picture) (Subject to change and errors in the technical data!) If you have further questions, we are happy to answer them by phone.

Condition: used, Flame Heating Device Roland Groß + Söhne GmbH Ring Burner for Preheating Weld Seams, Casting Preheating, etc. Model: 1 x 1" Ionization Serial No.: ALMA Year of Manufacture: 03/20 Connection Voltage: 230 Volt Max. Gas Pressure: 500 mbar Max. Air Pressure: 10 bar Max. Gas Flow Rate: 30 Nm³/h Max. Air Flow Rate: 300 Nm³/h Including 10 Different Flame Ring Nozzles - Flame monitoring by Hans Henning - Hinged ring nozzle made of two half-shells, inner Ø 310 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 400 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 490 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 500 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 590 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 800 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 990 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, arc length 1500 mm, with hose quick-connect coupling and ignition device, central outlet For heating pipes and vessels. For heating steel to welding temperature. Ideal for repair welds and the fabrication of welded assemblies from fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high velocity flame spraying. Gas heating for thermal coating applications. Ibedpsdz Spwjfx Aacoc

Condition: used, Nabertherm Nabertherm N 2260/S Chamber Furnace with Wire Heating up to 1300 °C Technical Specifications – Nabertherm N 2260/S Feature / Value Model: Nabertherm N 2260/S Maximum Temperature: 1300 °C Voltage / Connection: 400 V, 3~ (three-phase current), PE (protective earth) Heating Power: 75 kW Heating Zones: 5-sided (sides, floor, door, optionally ceiling) Internal Dimensions (Firing Chamber) Dimension / Value Width: 1,500 mm Iedpfx Aew Ec Egsacsbc Depth: 1,000 mm Height: 1,720 mm Volume: approx. 2,580 liters External Dimensions (Complete Unit) Dimension / Value Length: 2,000 mm Width: 2,250 mm Height: 2,850 mm Weight: approx. 3,100 kg Condition: used Scope of delivery: (see photo) (Subject to change and errors in technical data and information!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Espec Type: PSL-2KPH Thermo TEC Espec Temperature and Climate Test Chamber, Air-Cooled Temperature range: -70°C to +150°C Humidity range: 20 to 98% rH Iedpfx Aaow D Dgvscobc Temperature/Humidity Fluctuations: ± 0.3°C / ± 2.5% rH Temperature/Humidity Stability: ± 0.5°C / ± 3% rH Heat-up time: from -70°C to +150°C in 50 min Cool-down time: from +20°C to -70°C in 80 min Test chamber dimensions: width 600 mm x height 850 mm x depth 600 mm External dimensions: width 1010 mm x height 1690 mm x depth 1173 mm Test chamber volume: 306 liters Refrigerants: R-404A, R-508A Stainless steel construction Connection: AC 400V 3~ 50/60 Hz Max. 18 A Rated power: 1.5 kW Net weight approx. 400 kg For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New charge with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, monitored with calibrated instruments. Condition: used Scope of delivery: (see photo) (Technical data and specifications may be subject to change and errors!) For further questions, please feel free to contact us by phone.