Used Norma for sale (2,489)

Condition: used, Keyence Type: VHX-5000 Only 10 operating hours! Technical data: Frame rate: 50 F/S (max.) Resolution: Normal: 1600 (H) x 1200 (V) Approx. 1000 TV lines Bsdpowr Ax Hefx Abbelr 3CMOS *1, *3: 1600 (H) x 1200 (V) Approx. 1200 TV lines (2 million pixels x 3CMOS mode). Excellent color reproducibility. High Definition*3: 3200 (H) x 2400 (V) Approx. 1600 TV lines Super fine*3: 4800 (H) x 3600 (V) Approx. 2000 TV lines or more 18 Megapixel x 3CMOS*2, *3: 4800 (H) x 3600 (V) Approx. 2000 TV lines or more (18 million pixels x 3CMOS mode). Excellent color reproducibility. High dynamic range: Each RGB pixel in 16-bit resolution Electronic shutter: Automatic, Manual, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/9000, 1/19000 Supercharge shutter: 0.2 sec. to 4 sec. Adjustable in 0.1 sec. steps. White balance: Push-set, auto, manual, preset (2700 K, 3200 K, 5600 K, 9000 K) LCD monitor*5: Size color LCD (IPS) 23" Panel size 509.184 (H) x 286.416 (V) mm Pixel pitch 0.2652 (H) x 0.2652 (V) mm Number of pixels 1920 (H) x 1080 (V) (FHD) Display color approx. 16.77 million colors *4 Brightness 300 cd/m2 (center 1 point, typical) Contrast ratio 1000:1 (typical) Viewing angle ±89° (typical, horizontal), ±89° (typical, vertical) Approx. 1,680,000 images (if a 2-megapixel image is compressed) up to approx. 55,000 images (if a 2-megapixel image is not compressed) Image format: With compression: JPEG; Without compression: TIFF Maximum image size 20,000 pixels (H) x 20,000 pixels (V) (with image stitching function) Light source: Super bright LED lamp Lamp life 40,000 hours (reference value) Color temperature 5700 K (typical) List of components: VHX-5000 control unit VHX-2000D digital microscope VHX-S90BE Free-angle Observation System base unit VHX-S90F Free-angle Observation System lens holder VH-Z250R Dual-light high-resolution zoom lens 250x - 2500x Condition: used Scope of delivery: (As shown) (Changes and errors in technical data and information excepted!) We are happy to answer further questions by phone.

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 4,500 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,235 mm, fork length: 1,200 mm, empty load weight: 4,809 kg, drive type: Elektro, construction width: 1,195 mm, Electric 4-wheel forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: normal Front tires type: superelastic Front tires size: 23X9-10 Rear tires type: superelastic Bsdpfx Abovghw Ejbelr Rear tires size: 18x7-8 Rear tires condition: 60 - 80% Battery voltage: 80V Sideshift, 4th valve, front work lights, roof cover, front windshield, full free lift,

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: S36-0330, Trotec Speedy 360 CO₂ Laser, 80 W – Professional Laser Engraving & Cutting Machine For sale is a Trotec Speedy 360 CO₂ laser with 80 W laser power. This machine is ideally suited for engraving and cutting materials such as wood, acrylic, plastics, paper, leather, textiles, and many other substrates. The generous working area of 813 × 508 mm allows for the processing of standard sheet formats and multiple parts in a single pass. The machine features InPack-Technology™, which optimally protects the guides and optics from dust and debris. The integrated autofocus function ensures convenient height adjustment for focusing. The laser is in well-maintained, age-appropriate condition and is fully operational. The cutting grid and work area show normal signs of use from daily production. The machine has been in continuous operation, regularly cleaned, and serviced under a maintenance contract. Bedpfx Asxz Ekhobbjlr Depending on prior agreement, the machine can be demonstrated under power. Sale is ex location; loading/transport to be arranged by the buyer or via freight forwarder by arrangement. Scope of delivery: Trotec Speedy 360 CO₂ 80 W with honeycomb cutting table.

Condition: excellent (used), functionality: fully functional, fuel type: electric, color: green, operation weight: 9,000 kg, Year of construction: 1976, Description For sale is a well-maintained Schwarz & Wirtz PERFECT WE100 semi-automatic pipe bending machine—a robust and reliable solution renowned for its precision and long service life. The WE100 series is widely utilized in industrial fabrication, shipbuilding, construction, metalworking shops, and piping industries due to its strong bending capacity and dependable performance. This unit is in good working condition and has only operated in a professional workshop setting. All functions have been tested; the machine delivers precise bends even at maximum specifications. Included is a complete set of bending dies and mandrels (doorns) for both SCH40 and SCH80 pipes, making it ready for immediate production use. A demonstration video is available upon request. Technical Specifications Brand / Model: Schwarz & Wirtz PERFECT WE100 Machine Type: Semi-automatic pipe bending machine Maximum Pipe Diameter: DN100 Bsdpfxjxxkcds Abbelr Maximum Wall Thickness: 10 mm Drive / Power: Heavy-duty industrial-grade Bending Capability: Suitable for carbon steel piping, hydraulic piping, gas lines, and industrial tubing Operation: Semi-automatic operation with manual adjustments Condition: Mechanically sound, no functional faults detected Included Tooling (Dies & Mandrels – Complete Set) The machine is supplied with a full tooling package for both Schedule 40 and Schedule 80 pipe bending: Bending Dies + Mandrels (Doorns): - DN50 – SCH40 & SCH80 - DN65 – SCH40 & SCH80 - DN80 – SCH40 & SCH80 - DN100 – SCH40 & SCH80 This comprehensive set greatly enhances the machine’s production flexibility and overall value. Highlights & Advantages ✔ Fully operational and tested ✔ Good mechanical condition ✔ Complete die & mandrel set included (rare and valuable) ✔ Heavy-duty bending capacity ✔ Suited for demanding industrial applications ✔ High-quality German manufactured build ✔ Ready for immediate deployment ✔ Operation video available on request Condition Report - Mechanically sound - No electrical issues - Hydraulics operating correctly - Bending accuracy verified - Normal signs of use, no major faults - Always operated indoors in a professional workshop environment

Condition: used, Year of construction: 1998, operating hours: 13,258 h, 1998 | Liebherr L 522 with High-Tipping Bucket | Used Wheel Loader | 13258 hours 📍Location: Germany, Stuttgart 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 15000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 54 inspection points 53 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Wheel loader Liebherr L522 with high dump bucket. the condition of the machine corresponds to the value of the operating hours. leakage hydraulic oil on one of the two chassis motors. at the time of inspection, the machine ran / functioned without any other abnormalities. the machine shows wear on bolts and bushings corresponding to the age and mileage and the purpose of use, as well as signs of use (dents, abrasions, etc.) and corrosion. the machine has not been tested under load. well maintained and serviced machine. ready for immediate use. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "32949 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: Bedpfx Aboxy Amqobslr ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2025, machine/vehicle number: CAT0DE88CN7C00644, fuel type: diesel, motor manufacturer: Caterpillar C4.4, General information Field of application: Construction Weights Empty weight: 1.141 kg Functional Generator capacity: 88 kVA CE mark: yes Other information Fuel consumption: 15.2 Liter per Hour at 75% Load Bledoxxn R Sopfx Abber Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 149 l Transport dimensions (LxWxH): 2,29x1,13x1,48 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information RATING TYPE STANDBY: Output available with varying load for the duration of the interruption of the normal source power. Average power output is 70% of the standby power rating. Typical operation is 200 hours per year, with maximum expected usage of 500 hours per year.

Condition: excellent (used), Bystronic Type: ERMM180 Thermoplastic applicator Field of application The thermoplastic applicator applies a thermoplastic material to rectangular glass panes rectangular glass panes as part of a production line for solar modules. Bjdjd N Erpopfx Abbelr The plastic forms a seal to a second pane of glass, which is applied in a later step. applied in a later work step. The panes are fed, applied and removed on horizontally running belts/belt conveyors. belts/conveyors. The thermoplastic applicator is a highly technical machine that has to fulfill many requirements with great precision. For this reason, you should only use products (glass, sealant) that meet the specifications on the following pages. the following pages. This helps to achieve high-quality and safe production. production. Performance and connected loads Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant line: 0.5 to 1.2 mm Maximum width of the applied sealant line: 12.0 mm Required constant pneumatic inlet pressure: 6.5 to 8.0 bar Pneumatic operating pressure: 6.0 bar Compressed air consumption in normal operation: 10 standard liters/min Compressed air consumption when changing barrels: 500 standard liters/min Average energy consumption per hour: 10 kWh Working temperature of the sealant: 110°C to 130°C Ambient conditions and emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity:: 75% Noise level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material lidded container D18 according to DIN 6644 - with base (F1) and smooth outer surface (jacket design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Machinable glass panes Types of glass Glass panes with a smooth surface can be processed (float glass). Dimensions and weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastics based on poly-iso-butylene (butyl) can be processed. The plastic must be flowable in the range of approx. 110°C to 130°C and have a defined viscosity curve. viscosity curve. Only use materials that have proven themselves in practice and that have been approved by the manufacturers of these materials and by Bystronic. by the manufacturers of these materials and by Bystronic for your intended use. intended use. For detailed product descriptions and information on handling, storage and disposal of the plastic disposal of the plastic used can be found in the information sheets and safety data sheets provided by the manufacturers of the plastics. Dimensions of gantry robot with glass conveyor Height x width x depth: 2800 x 1890 x 2735 mm Weight of the gantry robot: 850 kg Weight of the glass conveyor: 1400 kg Drum pump dimensions Height x width x depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H for drum pump FP1: 4400 mm Height H for drum pump FP2: 4000 mm Control cabinet dimensions Height x width x depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with the material butyl. Condition: second-hand / used From test laboratory, as good as new condition, only a few operating hours for testing! Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, functionality: fully functional, machine/vehicle number: 2689, Year of construction: 2016, operating hours: 1,800 h, load capacity: 2,000 kg, lifting height: 4,700 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,200 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Chassis number: 2689 Load centre: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: normal Front tyres type: Superelastic Front tyres condition: 60 - 80% Bsdpoxglwlsfx Abbolr Rear tyres type: Superelastic Rear tyres condition: 60 - 80% Battery type: PzS Side shift, 3rd valve, 4th valve, rear work light, front work light,

Condition: used, maximum load weight: 37,600 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 09/2026, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment list available on request. Chassis * Double-T longitudinal beams welded with cross members, front construction height: approx. 147 mm (including fifth wheel plate) * ‘Compact rear’ chassis version * Interchangeable 2-inch king pin, single position, front overhang: approx. 570 mm * Container rails made of rectangular tube, approx. 200 x 120 x 8 mm * Reinforcements at the approach slope * Fixed external steel rear impact guard * Rear underrun protection in accordance with EU regulations * Side guard device in accordance with EU regulations * Side protection device approx. 460 mm high * Full Quick-Lock package – lockings at every possible position – theft-protected locking system * Container locks for securing the following containers: 1 x 20' container, rear flush * Length from king pin to rear edge of vehicle: approx. 6,620 mm Support Equipment * Two mechanical landing gears, 2 x 12 t, half-round with base plate, brand: Jost * Operation of landing gears on one side, on right side in direction of travel Axles/Aggregates * 3 axles, each with 9,000 kg load capacity * Wheelbase: approx. 1,410/1,310 mm * KRONE axles with air suspension and disc brakes, ET 120 Bljdexgk U Aopfx Abbor * Aggregate spacing = approx. 4,625 mm * Brake discs approx. 430 mm in diameter * Optional warranty extension on the KRONE axle: 6 years with unlimited mileage for on-road use within the EU. All wear-related parts: 3 years construction and manufacturer warranty, excluding normal wear. Applies to EU 2014, Norway, Switzerland, Turkey * Fully automatic, load-dependent electronic lift axle control for 1st axle * Manual function via operating console for forced lifting (=start-up aid per Directive 97/27/EC) and forced lowering via rotary switch * Preparation of lift/trailing axle(s) for operation from the tractor unit (installation in tractor not included), per selected electrical connections: - Lighting, for activation via Contact 6 of the 7-pin auxiliary connector (ISO 3731) - and/or Contact 12 of the 15-pin connector (ISO 12098) - and/or Contact 8A of the VBG connector * With lift and lowering facility, including automatic ride height reset Tyres (rims) * 6 pieces, 385/65 R 22.5 * No spare wheel, tread: M+S (mud + snow) * Wheel nuts with protective caps Mudguards * Plastic wheel covers * Splash protection in accordance with EU regulations Brakes * Braking system conforms to ECE Regulation 13 (including vehicle stability function) * Spring-loaded parking brake * Diagnostics via ISO 7638 connection (EBS supply cable) * Brake line connections below upper edge of beam * 4 wheel chocks with holder * Standard air connections ISO 1728 (Palm) * Lightweight alloy air tanks * Brake system manufacturer: Wabco Note: The trailer must only be towed by tractor units that ensure correct ABS function! * EBS system, 2S/2M, 2 sensors on one axle Lighting * Lighting and signal system per UN ECE Regulation No. 48 * 2 marker lights with rubber arm, LED version * Electrical connections below upper edge of beam * LED side marker lamps with directional indicator (flashing function) * 24 volt, front 7-pin socket DIN ISO 1185 * 7-pin socket DIN ISO 3731 at front, for auxiliary functions * Additionally, front 15-pin socket DIN ISO 12098 Note: Connector pins (2 x 7-pin and/or 15-pin) per ISO 1185/3731 and/or ISO

Condition: refurbished (used), functionality: fully functional, Year of construction: 2019, total length: 1,450 mm, total height: 1,800 mm, total width: 1,100 mm, type of input current: three-phase, overall weight: 3,000 kg, warranty duration: 12 months, table width: 1,450 mm, tank capacity: 19 l, table length: 1,100 mm, workpiece weight (max.): 150 kg, Description: The Massivit 1800 Pro is a large-format 3D printer engineered for companies that need to produce full-scale parts quickly and reliably. It is widely used in visual communication, automotive, marine, architecture, industrial prototyping, scenic construction, and composite mold fabrication. Equipped with two independent printheads, the system can manufacture two objects simultaneously or combine different print resolutions within a single job. Its generous 145 × 111 × 180 cm build volume allows the creation of tall, lightweight structures in a fraction of the time required by traditional additive technologies. Thanks to Massivit’s GDP (Gel Dispensing Printing) process, the machine prints complex geometries, large hollow volumes, overhangs and non-vertical walls without support structures, significantly reducing material consumption and post-processing. The printer is compatible with a wide range of Massivit-certified materials, including: • Dimengel 90 – general-purpose, cost-effective • Dimengel 100 – high-strength translucent material • Dimengel 300 Transparent – clear gel for optical or light-diffusion parts This unit has been fully refurbished by Futura3D B.V., with long-standing experience on Massivit systems, and restored using original-spec components. The printer is ready for immediate production. Machine Condition: • Fully refurbished by Futura3D B.V.with long-standing experience on Massivit systems • Dispensers fully rebuilt (new stators, bearings, couplings with all original components) • Pump and hydraulic system cleaned and serviced • UV modules tested and calibrated • Complete mechanical alignment performed (XYZ, SZ, table, material calibration) • Functionally tested and ready to print Machine viewable in Fleurus, Hainaut, Belgium, by appointment What’s Included: crate - Reinforced international-grade wooden shipping crate (included) installation - On-site installation and 1-week operator training Support - 1 year of technical assistance & remote support Possibility to print samples or perform an in-person demo with your files (appointment required) Key Specifications & Highlights: Large-format build area: 145 × 111 × 180 cm Dual independent print heads for higher throughput High-speed UV-curing gel deposition (up to ~300 mm/s) Support-less printing of complex shapes and overhangs Multiple print modes (Normal, Quality, High-Resolution, Mega-Quality, Variable Resolution) Remote monitoring, onboard cameras, and real-time head-tip view Ideal for full-scale prototypes, molds, displays, sculptural pieces, and industrial components. Incoterms & Logistics: Incoterm: Bjdpfx Aoxx S Diebbslr FCA Brussels (Belgium) Machine professionally dismantled, packed in reinforced wooden crate (~3000 kg), and made available for carrier pickup. Transport, insurance, customs clearance and international shipping are arranged by the buyer.

Condition: used, functionality: fully functional, machine/vehicle number: M5512, Year of construction: 2000, load capacity: 45,000 kg, lifting height: 14,700 mm, mast type: telescopic, Full-container reach stacker Chassis number: M5512 Mast type: telescopic Transmission: Clark Condition: Ready for operation and fully functional Technical condition: normal Bodpexwqzqsfx Abbslr Front tyres type: pneumatic Front tyres size: 18.00-33 Front tyres condition: 20 - 40% Rear tyres type: pneumatic Rear tyres size: 18.00-33 Rear tyres condition: 20 - 40% Description: Sliding cab broken, leakage left wheel hub - we sell ex works to save on transport and handling costs Sideshifter,

Condition: new, Year of construction: 2025, machine/vehicle number: GJ900182, fuel type: diesel, motor manufacturer: Caterpillar C32, General information Field of application: Construction Weights Empty weight: 11.481 kg Functional Generator capacity: 1.400 kVA CE mark: yes Other information Fuel consumption: 217,4 Liter per Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 6,669x2,45x2,789 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Bedoxxn Rxopfx Abbjlr RATING TYPE STANDBY: Output available with varying load for the duration of the interruption of the normal source power. Average power output is 70% of the standby power rating. Typical operation is 200 hours per year, with maximum expected usage of 500 hours per year.

Condition: good (used), Atlas Type: Xenotest Alpha LM High Energy Weathering tester Atlas Xenotest Alpha LM is a universal weathering instrument for testing the lightfastness and weathering resistance of materials under normal, high temperature and high performance conditions. XENOCHROME Filter Bedpjuuarysfx Abbelr XENOSENSIV gearbox Control of lamp power in W/m² Sample chamber temperature controlled up to 70 degrees Measuring sensors at sample level XENOSENSIV E(300-400 nm) and SST Stationary sensor for sample chamber temperature and relative humidity Humidification Irrigation Water supply with integrated water tank Electronic version: 230V, 50/60Hz Absorption filter 7 IR: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Window glass 10 FG: Synchronization 40 - 110 W/m² Coil run 21 - 57 W/m² Absorption filter 4 IR + 3 window glass: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Absorption filter 6 IR + 1 UV: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Rel. electrical power without XENOSENSIV sensor: continuously regulated to the set value 53 - 120 % Sample chamber temperature: 20 - 70° (depending on selected filter configuration) Black standard temperature: synchronized 25 - 130 °C coiled 25 - 100 °C Relative humidity: 10 % - 95 % Fan revolutions: 500 - 2500 rpm Dimensions: 900 x 780 x 1800 mm Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, functionality: fully functional, machine/vehicle number: 0157, Year of construction: 2010, operating hours: 13,903 h, load capacity: 3,500 kg, lifting height: 3,400 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,280 mm, power: 15 kW (20.39 HP), drive type: Elektro, Electric 4-wheel forklift Chassis number: 0157 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: normal Front tyre type: solid rubber Rear tyre type: solid rubber Bodpfx Ajxgl N Uobbelr Battery voltage: 80V Battery type: PzS Sideshift, 3rd valve, rear work light, front work light, half-cab,

Condition: good (used), Year of construction: 1998, spindle diameter 90 mm control Siemens SINUMERIK 840 C voltage 400 V stroke position adjustment 100 mm table hole 150 mm no. of strokes 100-1200 Hub/min weight of the machine ca. 8,0 t Key data Normal module: 6 mm Max. workpiece pitch circle diameter: 250 mm Max. tooth width (straight teeth): 60 mm Helix angle adjustment: 45° to +0.5° Axis angle: 0° to 90° Center distance workpiece/jigging spindle: –80 mm to +320 mm Stroke position, stroke length Max. stroke position range (depending on stroke length): 0 mm to 80 mm Stroke position adjustment range: 0 mm to 80 mm Stroke drive Stroke rates infinitely variable Standard: 100 to 1200 DH/min Motor for stroke drive: 9 kW Maximum cutting speed: 150 m/min Bsdpfxjxyadts Abbelr Feeds Rotation axes (tool C1, workpiece C2 axis): Feed stepless relative to 100 mm pitch circle diameter: 1.0 to 9420 mm/min Radial axis (column slide X1 axis): Feed continuously variable: 1.0 to 9420 mm/min, rapid traverse corresponds to maximum feed rates Connected load / weight Total connected load: 26 kVA Total weight (standard version): approx. 9,000 kg

Condition: new, Year of construction: 2025, machine/vehicle number: RZB00174, fuel type: diesel, motor manufacturer: C9.3B, General information Field of application: Construction Weights Empty weight: 2.300 kg Functional Generator capacity: 400 kVA CE mark: yes Other information Fuel consumption: 61 L/hr at 75% load Generator: SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Transport dimensions (LxWxH): 2,662x1,12x1,766 Bodpjxxn N Uofx Abbslr Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information RATING TYPE STANDBY: Output available with varying load for the duration of the interruption of the normal source power. Average power output is 70% of the standby power rating. Typical operation is 200 hours per year, with maximum expected usage of 500 hours per year.

Condition: excellent (used), Julabo Type: FL7006 Product Description: For sale is a high-performance recirculating chiller manufactured by JULABO, model FL7006, suitable for demanding applications in industry, research, and laboratory environments. The unit stands out with its high cooling capacity, reliable temperature stability, and robust design. Technical Data: Manufacturer: JULABO GmbH Model: FL7006 Item number: 10188873 Power supply: 360–440 V / 3PNPE / 50 Hz (three-phase) Current consumption: 14 A at 400 V Refrigerant: R404A Refrigerant charge: 1.500 kg Max. operating pressure: 24 bar Protection class: IP21 Temperature range: –20 °C to +40 °C Temperature stability: ± 0.5 °C Cooling capacity: approx. 1.55 kW at –20 °C approx. 5.1 kW at 0 °C approx. 7 kW at +20 °C Pump capacity: 60 l/min, 0.5–6 bar Tank volume: approx. 39–47 liters Dimensions (W×D×H): approx. 780 × 850 × 1480 mm Weight: approx. 252 kg Features & Characteristics: - Industrial-grade, robust construction - Air-cooled – no external water supply required - RS232 interface & volt-free alarm output - Clear LED display and user-friendly membrane keypad - Easy maintenance due to good accessibility - Front drain tap & convenient filling access on top Condition: Used – in very good technical condition. Normal signs of use consistent with industrial operation. Condition: used Scope of Delivery: Julabo FL7006 recirculating chiller Connection cable Shipping & Delivery: Shipping method: Freight shipping on pallet (by arrangement, shipping costs depend on destination) Pickup: possible by appointment. (Subject to change and errors in the technical data. All information is provided without guarantee!) Blodpeww Atbefx Abbor If you have any further questions, we will be happy to assist you by phone.

Condition: used, functionality: fully functional, machine/vehicle number: 1702, Year of construction: 2024, load capacity: 8,000 kg, lifting height: 5,500 mm, free lift: 1,945 mm, fuel type: electric, mast type: triplex, construction height: 3,220 mm, drive type: Elektro, Electric 4-wheel forklift truck Chassis number: 1702 Bjdpfx Asxglqxjbbjlr Mast type: Triplex Gearbox: Impulse control Technical condition: normal 3rd valve, 4th valve, rear working lights, front working lights, roof cover, heating, load protection grille, full cab, impulse control, safety light, interior mirror, exterior mirror, Load center of gravity at 900mm

Year of construction: 2020, condition: as good as new (ex-display), Here we offer you a resistance welding machine. The equipment is designed for automated resistance welding of the following connections: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The equipment is loaded and unloaded manually by one operator. Any use of the system other than the one described above is not in accordance with the intended use and is therefore not permissible! Layout of the unit Welding unit Sledge unit Cleaning unit weding electrode Base Linear unit Analysis unit DMC Dimensions (lxw) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Techn. availability % ≥ 95 Operator piece 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Back-up fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of construction 2020 Components of the plant -control cabinet -Protective enclosure -Linear unit Toothed belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Transmission ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 -Slide unit Balluff BES M08EC-PSC15B-S49G -evaluation unit DMC: Keyence SR-1000 -welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNN i=1 p=5mm Bjdoht U Snepfx Abbolr Reference switch integrated: Hall PNP normally open Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNN i=1 p=5mm Reference switch integrated: Hall PNP normally open Welding gun Crede PSZ-K Control unit : ST-T13V2.0 Power unit : LT- [...]

Condition: excellent (used), White Type: SC/KWT 450 Salt Spray Chamber Technical Specifications: Test chamber capacity: 450 liters Max. load: 100 kg Brine storage tank: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Areas of application: Corrosion tests: Salt spray test: Room temperature up to +50°C Condensation test: Room temperature Up to +45°C Humidifier +75°C Temperature stability The temperature deviation over time is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power 2.0 kW, Rated current 8.7 A Combination: Salt spray test SS: DIN 50021 Condensation test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: Used Scope of delivery: (See image) Bodpew Strcsfx Abbelr (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a weathering test instrument. Heraeus Atlas Xenotest BETA a universal weathering instrument for testing the light fastness and weathering resistance of materials under normal, high temperature and high performance conditions. Bledpfx Abog Dglysbsr XENOSENSIV Gear Regulation of the lamp power in W/m² XENOCHROME 320 35-100 W/m² Sample chamber temperature controlled up to 80°C degree Measuring sensors at sample level XENOSENSIV E(300-400 nm) Humidification / Sprinkling Water supply with integrated water tank Sample chamber temperature: Ambient - 80 °C Black standard temperature: surface - 130 °C Relative humidity: 10 % - 95 % Electronic version: 3/N/PE AC 400V± 10 % 50-60 Hz Mains connection: 32A Power consumption: approx. 12kVA Rated power of xenon lamp 2200VA Power of Xenon lamp 2800VA Rated current 16A Lamp current max. 20A Dimensions: Width 900mm x Depth 1200mm x Height 1800mm. sample area max. 4000cm² Weight: approx. 400kg Type: Heraeus Atlas Xenotest BETA LM Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved). Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a be weathering tester. Atlas Xenotest Alpha LM a universal weathering instrument for testing the fastness to light and weather resistance of materials under normal, high-temperature and high-performance conditions. XENOCHROME filter XENOSENSIV gear Control the lamp power in W / m ² Sample room temperature controlled up to 70 degrees Electronics at sample level XENOSENSIV E(300-400 nm) and SST Bodpfxsd Dtn Uj Abbjlr Stationary samples temperature and relative humidity sensor Humidification Irrigation Water supply with an integrated water tank Electronic version: 230V, 50/60 Hz Absorption filter 7 IR: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Window glass 10 FG: tracking 40-110 W / M ² turn running 21 - 57 W / m ² Absorption filter 4 IR + 3 window glass: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Absorption filter 6 IR + 1 UV: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Rel. electrical power without XENOSENSIV sensor: continuously adjusted to the set value 53-120% Samples ambient temperature:-20-70 ° (depending on selected filters configuration) Black standard temperature: Tracking 25-130 ° C turning barrel 25-100 ° C Relative humidity: 10% - 95% Fan RPM: 500-2500 RPM Dimensions: 900 x 780 x 1800 mm Type: Xenotest Alpha LM high energy Condition: pre-owned / used Scope of delivery: (See image) The unit comes out of an operation. We may more questions like on the phone for you answered

Condition: excellent (used), pure engineering Type: pureGMC18 System for manual weighing processes Climatic chamber for highly sensitive weighing processes with ultra-microbalances. The weighing chamber is specially designed for the gravimetric determination of particulate emissions in exhaust gas analysis and fulfills the normative requirements of the environmental authorities. Bsdpfxolddmze Abbelr All necessary climate control components are integrated. In combination with the HEPA filter, a contamination-free and precisely and precisely conditioned weighing and storage area for the filters is ensured. Features: Precise temperature and humidity control Weather station (p, t, h) for buoyancy correction Dew point mirror (optional) Vibration-decoupled granite for low-vibration installation of an ultra-microbalance Ionization device against static charge Flow protection for shielding the load cell Touch panel for intuitive operation Ethernet interface for process data exchange Interior with sockets, earthing bolt Advantages: Meets normative requirements for particle weighing according to: ECE-R83 (light duty), ECE-R49 (heavy duty), EPA1065 (U.S. Environmental Protection Agency) Tested, ready-to-connect design Designation pureGMC18 Temperature 22°C ± 1 K Humidity 45%r.H ± 3% Dimensions W/D/H 1,800/800/1,980 mm Clean room class 5 (ISO14644-1) Power supply 400V, 15A 50/60 Hz Weight: 650 kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Oxford Instruments Here we offer you an INCAx-act Analytical Drift Detector. Microanalysis of elements including boron and above Blodpfx Abohx Nchsbor Operating temperature Normal mode 10-25 degrees Operating temperature extended mode 10-30 degrees Storage temperature -25 to 40 degrees and 8 to 80% humidity non-condensing Operating humidity

Condition: excellent (used), Here we offer you Defensor steam humidifier. Defensor Mk5 Resistance Steam Humidifier Steam humidifier Defensor Mk5 The Defensor Mk5 steam humidifier is built according to the current state of the art and the recognized safety regulations. Nevertheless, in the event of improper use of the Defensor Mk5 steam humidifier, hazards may arise for the user and/or third parties, and/or or material assets may be damaged. To ensure safe, proper and economical operation of the Defensor Mk5 steam humidifier, please observe and comply with all the information and safety instructions contained in these installation and operating instructions. Defensor Mk5 type series Visual For indirect or direct room humidification with normal requirements for control accuracy. Defensor Mk5 Visual double unit large 80 max. steam capacity in kg/h 80.0 Bsdpjnyh T Defx Abbelr 400V/3~/50...60Hz Mk5 ... 80 unit A: 40 kg/h unit B: 40 kg/h Type: Defensor Mk5 ... 80 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.