Used Multitool for sale (38)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 50,115 h, MACHINE DETAILS Laser power: 2700 W X-travel: 2585 mm Y-travel: 1280 mm NC: 50115 h Laser ON: 49819 h Beam time: 12287 h EQUIPMENT - Sturdy C-frame - Coordinate guide with integrated linear magazine, 21 places for tools and clamping claws - 2 x clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on laser chute - Laser unit: TLF 2000 high-frequency excited CO2 laser, vibration-insulated, integrated in machine frame, incl. cooling unit and DIAS 3 laser controller - HI-LAS high-pressure cutting - Fast processing with SprintLas Iedpfx Aett Nr Tjacotn - ContourLas for producing small holes - Programmable cutting gas pressure setting - Laser cutting head: 5" lens, quick-change device, APC distance control - Lens monitoring sensor system - Additional cutting head with 7.5" lens - Punching head: hydr. mono tool holder, 360° rotation for all tools, automatic tool length compensation, tool spray lubrication, 2 x lubricant containers, punching slug extraction, chip bucket - Sinumerik 840D control system, 10.4" TFT color screen, online help, diagnostic function, 3.5" floppy disk drive, RJ45 network connection - Safety: multi-beam light barriers, quick shutdown hydraulics, extraction and compact dust protection device against stray radiation on the cutting head - TLF 2700 laser incl. 7.5" cutting head for stainless steel - AutoLas Plus - MultiTool function - Thread forming function - Marking/quick beading function - Rolling technology function - Softpunch function - 2 x additional clamping claw - Blow-out device for small parts - BNC network connection instead of RJ45 connection

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 5,899 h, Other machines and tools included with the machine: - Tools belonging to the machine (a detailed list can be provided) - Quick Sharp - Multiset ITM BASIC MACHINE: TruPunch 3000 Large Format (S11) Machine Configuration: • C-frame structure • Coordinate guidance system • Linear magazine with 24 stations for clamps and tools • Hydraulic clamps (3 units) • Maintenance-free 3-phase servo motor drives • Repositioning unit with programmable stripper • Foot switch for clamp closure • Part removal flap • Transport and assembly fixtures Punching Head: • Servo-electric punching head • Rotatable single tool adapter • Manually adjustable press foot force • Programmable press foot positioning • Tool length compensation • Spray lubrication system for punches • Vacuum slug removal • Forming capability • Adjustable stroke rate • Tool lubrication level monitoring Control System: • TRUMPF controller based on Bosch Rexroth IndraMotion MTX • Control panel with 17" TFT display • Integrated technology database • Internet-based teleservice interface • Automatic shutdown function • NC program management • Production planning feature Data Transfer: • USB and network interfaces • Network connection (RJ45) Itodpfx Aajwm Shascjn Safety Features: • CE marking • Multi-beam light curtains • Rapid drive shutdown Advanced Standard Equipment: • 1st index pin position, right-hand inner side • Ball transfer tables • Finished parts container • Scrap/chip container OPTIONAL BENEFIT PACKAGES: 2. Productivity Package • MultiTool function • Sensor for part chute • Spray die lubrication with level monitoring 3. Punch Quality Package • MultiShear function • Deburring and roller technology • Adaptive stroke calibration 4. Forming Package • Tapping function with breakage detection • Marking/rapid beading function • MultiBend function • Height-adjustable clamps 5. Engraving Function 6. Smart Punch Monitoring 7. Wireless Operation Point 8. MobileControl App 9. 21 RTC cartridges + TOOLS!

Condition: excellent (used), Year of construction: 2006, punching force: 28 t, punching diameter: 105 mm, throat depth: 1,500 mm, Boschert TWIN 1500x2000 Rota-Index TRUMPF quick-change tool system Station 1: Rotation with index option for Boschert Multitool Max. punching diameter 105 mm. Tool continuously rotatable. Station 2: Max. punching diameter 105 mm with Boschert Multitool Revotool insert option. Incl. 8-way tool holder. Punching force: Yes, 280 kN (28 tons). Travel range x- 2050 mm (repositioning up to 9999 mm). Y- 1580 mm. Punching arm reach: 1750 mm. Tool system: Trumpf Gr1-3 (105 mm) and Boschert Revotool. Labod 32060 graphic control system / workshop programmable. Max. sheet thickness: 6 mm (clamp opening). Max. stroke height: 90 mm, continuously programmable up and down. Table width left + right: 2250 mm each Table depth: 3250 mm Table height: 900 mm Total width: 4900 mm Total depth: 4800 mm Total height: 2080 mm Drive power: 20 kVA Machine weight: 15,000 kg Hydraulic oil capacity: 160 l Color: Blue RAL5017/Light gray RAL7035 Machine built in 2006 Ball transfer table Slug extraction system Fast hydraulics Very well-maintained condition Ijdpfswdmwqox Aacotn With accessories

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 47,000 h, laser power: 2,000 W, punching force: 76 t, workpiece weight (max.): 120 kg, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Special features: + Thread forming function with thread breakage detection + MultiTool function + Marking/Fast beading function + Repositioning cylinder + Sensor for part chute Standard features: - Stable C-frame - Coordinate guide with integrated linear magazine - 21 pockets for tools and clamps - 2 clamps - Drives: maintenance-free three-phase servo motors - Brush tables - TCF1 laser (2000W) - HI-LAS high-pressure cutting Itodjwcq Hgopfx Aacon - Fast machining with SprintLas - Programmable Cutting gas selection/pressure adjustment - Laser cutting head with 5" lens - Cutting head quick-change device - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact dust extractor - Rotating tool holder - Automatic repositioning device with hold-down clamp - Automatic part chute for parts 300x500 mm - Automatic tool changer with 19 stations - 2 clamps - Good parts container - Spray lubrication for punches - 2nd lubricant container - Punch slug extraction system - Chip bucket - Hydraulic quick shut-off system - External control panel - 15" TFT touch color screen - USB stick interface - 3.5" floppy disk drive - Safety features - RJ45 network connection - Network connection - Detailed operating instructions - Remote diagnostics system

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 14,161 h, machine/vehicle number: A0110A0036, laser power: 2,000 W, punching force: 16 t, sheet thickness (max.): 4 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, space requirement length: 6,000 mm, space requirement width: 6,900 mm, TECHNICAL DETAILS Combined operation: 2,175 x 1,250 mm Laser operation: 2,500 x 1,250 mm Punching mode: 2,500 x 1,250 mm Outputs Maximum sheet thickness: 4 mm Maximum punching force: 165 kN Maximum workpiece weight: 120 kg Laser power: 2000 W Laser speeds X-axis: 90 m/min Y-axis: 60 m/min Simultaneous: 108 m/min C-axis punching: 60 m/min C-axis thread forming: 180 m/min Punching stroke sequence: 600 1/min Stroke sequence marking: 1,300 1/min Tools Tool positions in the linear magazine: 19 (with 2 clamps) MultiTool capacity: 2 to 10-fold Number of tools in MultiTool: 19 to 190 Rotation of all tools: 360 Tool change time: 0.9 - 3.6 s Itsdpfx Aovgc Apoacjn Maximum punching diameter: 76.2 mm Maximum bending height (MultiBend): 25 mm Position accuracy Position deviation: ±0.1 mm Average position spread: ±0.03 mm MACHINE DETAILS Total weight: 12,500 kg Space requirement: 6,000 x 6,900 mm Connected load: 55 kVA Laser cutting time: 14,161 h Laser switch-on time: 63,575 h

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 13,549 h, laser power: 3,200 W, punching force: 22 t, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 3 mm, workpiece weight (max.): 200 kg, TECHNICAL DETAILS Punching work area: 2,585 x 1,280 mm Laser working area: 3,085 x 1,370 mm Combined working area: 3,085 x 1,280 mm Control system: Siemens Sinumerik 840 D Laser power: 140 - 3,200 watts Wavelength: 10.6 µm Sheet thickness: 8 mm Cutting capacity mild steel: 8 mm Cutting capacity aluminum: 3 mm Cutting capacity stainless steel: 4 mm Iodpfx Aajvzrb Djcjtn Workpiece weight: max. 200 kg Punching force: 220 kN Active hold-down device: 4.5 - 20 kN Linear magazine: 21 tools with 3 clamps Programmable chute: 500 x 500 mm C-axis punching: 60 rpm C-axis thread forming: 180 rpm Punching stroke sequence: 900 rpm Stroke sequence marking: 2800 1/min Compressed air connection: 7 ± 1 bar Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h MACHINE DETAILS Length: approx. 7.5 m Width: approx. 8.1 m Height: 2.4 m Weight: 16 tons Laser switch-on time: 49,949 h Cutting time: 13,549 h EQUIPMENT - Sturdy C-frame - 2 x clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on laser chute - 2 x good parts box - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Cutting gas pressure setting programmable - Laser cutting head: 5" lens, quick-change device, distance control APC - Lens monitoring sensor system - Additional cutting head with 7.5" lens - Punching head: hydr. mono tool holder, 360° rotation for all tools, automatic tool length compensation, tool spray lubrication, 2 x lubricant containers, punching slug extraction, chip bucket - Safety: multi-beam light barriers, quick shut-off hydraulics, extraction and compact dust protection device against stray radiation on the cutting head - TLF 3200 laser incl. 9" cutting head for stainless steel - AutoLas Plus - MultiTool function - MultiBend function - Thread forming function - Marking/quick beading function - Rolling technology function - Softpunch function - 1 x additional clamping claw - Chip conveyor with tilting container - Brush tables with loading and unloading aid - Blow-out device for small parts - BNC network connection instead of RJ45 connection

Condition: ready for operation (used), Year of construction: 2010, operating hours: 57,504 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, AUTOMATION - SheetMaster - loading and unloading in parallel with main time - Toolmaster 70 - setting up in parallel with main time - GripMaster with scissor lift table - Good part conveyor TECHNICAL DETAILS Travel paths X / Y: 2500 / 1250 mm Sheet thickness: 8 mm Punching force: 220 kN Active hold-down clamps: 4.5 - 20 kN Workpiece weight: 200 kg Control: Siemens Sinumerik 840D  Part flap: 500 x 500 mm Speed X / Y / simultaneous: 100 / 60 / 116 m/min C-axis: 500 rpm Stroke sequence punching / marking: 1600 / 3000 1/min Position deviation Pa: ±0.1 mm Position spread Ps: ±0.03 mm Linear magazine: 21 tools with 3 clamps Tool change time for single tool / multi-tool: 3 / 0.3 s MACHINE DETAILS Space requirement: 6,760 x 6,100 mm Average power consumption: 9.5 kW Operating hours: 57,504 h EQUIPMENT - Stable, easily accessible C-frame - Moving ball roller tables - Linear magazine for tool stations and clamping clamps - Foot switch for clamp closing - Good parts container - Hydraulic single tool holder, 360° rotation - Manually adjustable holding down force - Programmable holding down device - active/passive/repositioning - Spray lubrication of punch - Punch slug extraction - Level monitoring for thread forming and tool lubrication - CE marking - Multi-beam light barriers - Quick shutdown of hydraulics - Bulge detection ADDITIONAL EQUIPMENT - Function MultiTool - MultiBend function - Thread forming function - Roller technology function - Marking - Multishear - Adaptive stroke calibration - Active die - Repositioning cylinder - Spray lubrication of die with level monitoring - Repositioning cylinder - Sensor for parts chute - Vibration-damped installation - Chip conveyor with tilting container Ijdpovxi Suefx Aacotn - Blow-out device for small parts

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, operating hours: 11,676 h, machine/vehicle number: KM-1148, laser power: 3,200 W, punching force: 22 t, punching diameter: 76 mm, sheet thickness (max.): 8 mm, workpiece weight (max.): 230 kg, workpiece length (max.): 1,650 mm, workpiece width (max.): 2,585 mm, No reserve price - guaranteed sale at the highest bid! Machine including SheetMaster and TrumaGrip TECHNICAL DETAILS Punching force: 22 tons Control: Siemens Sinumerik 840 D Punching working area: 3,085 x 1,740 mm Combined working area: 2,585 x 1,650 mm Max. sheet thickness: 8 mm Max. workpiece weight: 230 kg Max. punching diameter: 76.2 mm Rapid traverse X / Y / simultaneous: 90 / 60 / 108 m/min Tool holder: Hydraulic mono tool holder, 360° rotation Holder: Programmable for repositioning processes Chip handling: Chip bucket Laser unit: High-frequency excited CO₂ laser TruFlow Laser working area: 3,085 x 1,650 mm Laser power: 2,700 Watt Laser cutting heads: 5" lens, 7.5" lens, cutting head quick-change device Distance control: DIAS Cutting technology: HI-LAS high-pressure cutting Functions: AutoLas, ContourLas Laser control: TASC 3 MACHINE DETAILS Width: 2,400 mm Length: 8,700 mm Height: 7,800 mm Total weight: 22,500 kg Switch-on time: 59,2344 h Laser cutting time: 11,676 h EQUIPMENT - Parts chute 500 x 500 mm, sensor-monitored - 2 good parts boxes - AutoLas - Ejection cylinder on laser chute - Automatic tool length compensation - Tool spray lubrication - Punch slug extraction - 2nd lubricant container - Multi-beam Light barriers - Quick shutdown hydraulics - Extraction and compact dust extractor - MultiTool function - Thread forming function - Vibration-damped installation - Brush tables - Chip conveyor with tilting container - Standard equipment SheetMaster 1606 - Loading station with spreading magnets - TRUMAGRIP scrap skeleton disposal unit with scissor lift table - Sheet thickness gauge for double sheet control - Suction plate module - Parts conveyor belt A deposit of EUR 7,500 is required for transport security. Itodov Am Twspfx Aacen

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 500 h, TruMatic 6000 fiber large format (K06) + SheetMaster + GripMaster + TruStore 3030 Double tower (46 Storage pallet) Full automated high-end punch laser combination machine with with all available options! Operating hours: 500 h (!) Year of prod.: 06/2022 Highlited options: Itedpfx Aew Iz N Ijacjn Punching quality package : • MultiShear function • Deburring and roller technology function • Adaptive stroke calibration • StripLine Forming package: • Tapping function including forming tap breakage control • Marking/quick beading function • MultiBend function • Height-adjustable clamps Descending die MultiTool function Engraving function Die spray lubrication with level monitoring Chip conveyor with tipping container Loading/Unloading: SheetMaster 3000 x 1500 mm (AK04) Loading and unloading parallel to production Peeling unit including positioning aid for large sized sheets Additional positioning aid for small-sized sheets Additional positioning aids for medium-sized sheets First additional suction package Second additional suction package Unloading monitoring of laser cut parts Integrated tool changer, 40 stations GripMaster 3000 x 1500 mm Three scrap skeleton grippers, one of which with sensor system Parts conveyor belt for punch and laser side TruStore 3030 double tower storage system (46 pallet) • Storage equipment • Sheet size 3048 x 1524 mm • 3 t load capacity per pallet • Storage safety device • Column covering • Pallet lift (lifting chain, cable carrier) • 19" touchscreen operating panel • Storage interface for connecting two automation solutions • Instruction, documentation • Electrical cabinet lighting • CE marking and EC Machinery Directive

Condition: used, Year of construction: 1997, EUROMAC CX 1000 PRESSURE 30t TABLE DIMENSIONS: 1000χ2000mm MULTITOOL 6 POSITIONS DIAMETER Φ24 SHEET METAL THICKNESS 6MM IN TOP CONDITION Itodsncdvbspfx Aacen WITH EXTRA TOOLS MADE IN ITALY

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 700002, punching force: 18 t, sheet thickness (max.): 6 mm, travel distance X-axis: 1,275 mm, travel distance Y-axis: 2,030 mm, punching diameter: 76 mm, table load: 75 kg, No reserve price - guaranteed sale at the highest bid - Attractive price due to lack of space for new machine! Submitting a bid obliges you to pick up the machine on time in week 3 - 2025 (January 13th, 2025 - January 18th, 2025). TECHNICAL DETAILS Working area Working area (X x Y): 1,275 x 1,280 mm Extended working area with additional tables: 1,275 x 2,030 mm Performance Max. sheet thickness: 6.4 mm Max. punching force: 180 kN Max. workpiece weight: 75 kg Max. clearance height: 38 mm Programmable hold-down force: 400 - 1,700 kN Speeds X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min Punching stroke sequence (step width 1 mm): 900 1/min Punching stroke sequence (step width 25 mm): 420 1/min Signing and fast beading stroke sequence: 2,200 1/min C-axis: 3 revolutions/s Tools Linear magazine: 9 tools Number when using multitool (2 clamps): 9 - 90 tools Rotation of all tools: 360° Tool change time Single tool: approx. 3.5 s Multitool: approx. 0.9 s Max. stand diameter single stroke: 76 mm Max. stand diameter standard multicut: 200 mm Programmable part chute Max. part size: 200 x 200 mm Sortable in: 2 containers Accuracy Position deviation: ± 0.1 mm Average position spread: ± 0.03 mm TRUMPF CNC control Itjdpjvl E Tnefx Aacjn Base: Bosch Type3 Color monitor: 10.4" Hard disk storage: 300 MB for NC programs Floppy disk drive: 3.5" Platform: PC Pentium with Windows NT Workshop programming: ToPs 2000 Safety Safety light barrier system: Two-beam light barrier MACHINE DETAILS Electrical connection: 17 kVA Electrical energy: approx. 8 kW Pneumatic connection: 7-14 bar Compressed air consumption: 8 Nm³/h Dimensions and weights Space requirement (including light barrier): 410 x 5,700 mm Height: 2,255 mm Height with hood open: 2,505 mm Weight: 8,000 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 44,973 h, laser power: 2,700 W, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,585 mm, travel distance Y-axis: 1,280 mm, number of slots in tool magazine: 21, AUTOMATION - SheetMaster - GripMaster - TrumaSort R4 ADDITIONAL EQUIPMENT - Laser TruFlow 2700 - MultiTool function - Thread forming function - Marking/fast beading function - MultiBend function - Rolling technology function - Repositioning cylinder - Bulge detection - Chip conveyor TECHNICAL DETAILS Punching working area: 2,585 x 1,280 mm Laser working area: 3,085 x 1,370 mm Combined working area: 3,085 x 1,280 mm Control: Siemens Sinumerik 840 D Laser Laser power: 140 - 2,700 watts Wavelength: 10.6 µm Sheet thickness: 8 mm Workpiece weight: max. 200 kg Punching Punching force: 220 kN Active hold-down clamps: 4.5 - 20 kN Linear magazine: 21 tools Programmable slide: 500 x 500 mm Positioning speed X / Y / simultaneous: 90 / 60 / 108 m/min C-axis punching: 60 rpm C-axis thread forming: 180 rpm Itodpfx Aaevxivmecsn Punching stroke sequence: 900 rpm Signing stroke sequence: 2800 rpm Position deviation: ± 0.10 mm Position scatter: ± 0.03 mm MACHINE DETAILS Length: approx. 7.5 m Width: approx. 8.1 m Height: 2.4 m Weight: 16 t Laser switch-on time: 29,826 h Cutting time: 6,054 h Machine switch-on time: 44,973 h Compressed air connection: 7 ± 1 bar Consumption of laser gas CO2 / N2 / He: 1 / 6 / 13 l/h EQUIPMENT - Stable, easily accessible C-frame - Drives with maintenance-free three-phase motors - Programmable hold-down device for repositioning - Sensor-monitored part slides for punching and laser station, ejection cylinder on laser slide - Laser unit: High-frequency excited CO2 laser, vibration-insulated, including cooling unit and laser control DIAS 3 - HI-Las high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Programmable cutting gas pressure setting - Laser cutting head: 5'' lens, quick-change device, distance control - Multi-beam light barriers, quick hydraulic shutdown, extraction and compact dust extractor, protective device against scattered radiation on the cutting head

Condition: ready for operation (used), Year of construction: 2006, operating hours: 52,092 h, functionality: fully functional, machine/vehicle number: A0010A0169, punching force: 18 t, sheet thickness (max.): 6 mm, travel distance X-axis: 1,270 mm, travel distance Y-axis: 1,270 mm, workpiece weight (max.): 75 kg, TECHNICAL DETAILS Working area X x Y: 1,270 x 1,270 mm Performance Max. sheet thickness: 6.4 mm Max. punching force: 180 kN Max. workpiece weight: 75 kg Speeds X-axis travel speed: 90 m/min Y-axis travel speed: 60 m/min Simultaneous travel speed (X + Y): 108 m/min Stroke frequency Punching frequency with 1 mm stroke: 900 rpm Punching frequency with 25 mm stroke: 420 rpm Marking frequency: 2,200 rpm C-axis: 3 rpm Itedpswm Dciofx Aacon Tool system Linear magazine: 9 tools Number of tools with multi-tool (2 clamps): 9 to 90 tools Rotation of all tools: 360° Tool change time for single tool: approx. 3.5 s Multitool tool change time: approx. 0.9 s Max. punching diameter single stroke: 76 mm Max. punching diameter standard Multicut: 200 mm Part discharge Programmable parts flap – max. part size: 200 x 200 mm, sortable into 2 containers Control system Control type: TRUMPF CNC BOSCH Type 3 Workshop programming: ToPs 2000 MACHINE DETAILS Electrical connection: 400 V / 50 Hz Connected load: 17 kVA Electrical power consumption approx.: 8 kW Compressed air connection: 6 bar Compressed air consumption: 3 Nm³/h Dimensions and weight Space requirement (including light barriers): 4,100 x 5,700 x 2,070 mm Machine weight approx.: 8,000 kg