Used Multi Spindle Drilling Machine for sale (90,483)

Condition: excellent (used), functionality: fully functional, SELECT 33300 Drilling machine for wooden stairs. To drill the banister holes in string boards and hand rails. The machine has a hydraulic feed regulation (no splintering of the holes) 400 VAC , 1,5 kW, 6 Bar. The drilling device can turn 60 Degree to the leftr and to the right. Rjdpfx Aajvl E Tbe Ejck The drilling tool can be clamped by a collet. Line laser for positioning of the workpiece.

Condition: used, Year of construction: 2006, total width: 1,100 mm, total length: 3,100 mm, total height: 1,700 mm, - Year: 2006 - Documentation available: No Rcsdox Ig H Tepfx Aa Eok - CE certificate present: No - Serial number: 466 - Main motor power [kW]: 1.1 - Number of spindles [pcs]: 3 - Max. height adjustable [mm]: 120 - Table length [mm]: 3100 - Table width [mm]: 700 - Voltage [V]: 400 - Current consumption [A]: 2.8 - Fuse [A]: 16 - Power [kW]: 1.1 - Transport dimensions: 3100mm x 1100mm x 1700mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2003, Deep Hole Drilling and Milling Machine TBFZ 1600 CNC Year of manufacture: 2003 X-AXIS TRAVEL: 1600 MM Y-AXIS TRAVEL: 1200 MM Z-AXIS TRAVEL: 500 MM W-AXIS TRAVEL: 1200 MM B-AXIS TRAVEL: 360° (Rotary table) * Table size (LxW): 1500x1500 mm * T-slots: 5x DIN 650-22 h12, 150 mm spacing * Tool clamping: hydraulic * Electrical connection: 400 V, 50 Hz * Compressed air connection: rated flow rate 7000 l/min, operating pressure: 6 bar * Botek driller optionally available Rodpfx Aaoxz Aygj Esck * Feed drive: brushless AC servo motors * Feed rate: 0-20000 mm/min * Rapid traverse: X 20000 mm/min, Y+Z 20000 mm/min * Manual mode: 20000 mm/min * Setup operation: 0-2000 mm/min

Condition: good (used), Description Radial drilling machine with MK 5 spindle and 2000 mm arm reach, hydraulic clamping. Technical data: Spindle taper: MK 5 Maximum drilling capacity in steel / cast iron: 65 / 70 mm Maximum thread cutting in steel M 50 / cast iron M 60 Quill stroke: 370 mm Arm reach: 490 to 2000 mm 12 spindle speeds from 35 to 1890 rpm 6 automatic feeds: 0.07 - 0.96 mm/rev Column diameter: 432 mm Motor power: 5.5 kW - 400 Volt Total power approx. 9 kW Base plate dimensions: 2920 x 1140 mm Machine dimensions (L x W x H): 2980 x 1140 x 3470 mm Height to top of column: 2960 mm Rjdpex Rdapsfx Aa Esck Distance spindle to base: 1900 mm Weight approx. 6600 kg Features: Hydraulic clamping Precision ground gears Automatic tool ejector Arm drop safety device Forward and reverse operation Accessories: Coolant unit Automatic tool ejector Cube table - 1000 x 800 x 500 mm Work lamp Additional product information Price and availability upon request Spindle taper MK 5 Arm reach from 1600 mm Drive type: Gear drive

Condition: used, Year of construction: 1997, Technical details: number of spindles: 6 spindle passage: 18 mm turning length: 63/50 mm weight of the machine ca.: 8,6 t Rcsdpfx Aajwl Nm Ds Esk spindle drive motor: 11 kW

Condition: used, Year of construction: 1960, arm length 1600 mm Rcsdpfox Ik Unox Aa Eek tool adaptor ja fabric-no. 9787 weight 4,6 t with drill cube

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2013 Equipment and technical data: - Interchangeable drilling gears for: - Line boring - Hinges - Mounting plates - Connecting fittings - Front fastenings - Line boring gear can be used rotated by 90° - Pneumatic hold-down device - Drilling gear system for quick change of vertical drilling modules - Vertical drilling gear: Motor power 1.6 kW - Vertical drilling gear: Speed approx. 2,780 rpm - Power supply: 400 V, 3-phase, 50 Hz Rjdpfx Aexwz Nxsa Esck - Maximum drilling depth / Y-adjustment: approx. 550 mm - Extraction connection: 100 mm Dimensions: approx. 940 x 1560 x 980 mm Weight: approx. 125 kg Availability: approx. mid/end of January 2026 Location: Hesse

Condition: used, Year of construction: 1973, total height: 2,700 mm, total width: 720 mm, total length: 2,300 mm, Empty weight: 3.000 kg - Year: 1973 - Documentation available: Yes - CE certificate present: No - Serial number: 95361 - Control: Conventional - Motor power: 3.0kW - Drilling depth: 330mm - Spindle speed max.: 1120rpm - Model: iaalboormachine - Tool holder: MK4 - Table width: 600mm - Table length: 750mm - Drilling capacity: 40mm - Travel X: 1000mm - Spindle diameter: 5mm - Travel Z: 900mm - Max. reach: 1300mm - Spindle speed min.: 28rpm - Transport dimensions: 2300mm x 720mm x 2700mm (l x w x h) - Transport weight [kg]: 3000kg Rodpfox Igczox Aa Eeck - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2018, Radial Drilling Machine KNUTH R 40 V Year of manufacture: 2018 Very little used Clamping cube Digital depth display Redpfoxdw Ukox Aa Eeck Technical Data: WORKING AREA Drilling capacity: 40 mm Tapping capacity, cast iron: M 40 Tapping capacity, steel: M 32 Max. drilling depth: 260 mm Machine table dimensions: 2050 mm x 920 mm x 180 mm Cube table dimensions: 620 mm x 450 mm x 450 mm Arm reach: 300 mm - 1300 mm Distance spindle nose to table surface: 300 mm - 1200 mm Vertical arm travel: 640 mm Column diameter: 280 mm TRAVEL Horizontal travel of drilling head: 1000 mm MAIN SPINDLE Speed range: 54 rpm - 2150 rpm Spindle taper: 4 MT FEED Feeds: 0.1 mm/rev - 0.63 mm/rev DRIVE POWER Main drive motor power: 2.2 kW Lifting motor: 1.1 kW DIMENSIONS AND WEIGHT Dimensions (L x W x H): 2.07 m x 0.85 m x 2.43 m Weight: 2300 kg

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment. Especially suited for stair construction, window manufacturing, and universal use thanks to pneumatic height adjustment. Angled dowelling and baluster drilling are easily achieved via the swivelling drilling unit. Motor with pole-changing switch, two speeds Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm Motor start via practical handle switch Equipped with Röhm 2-jaw chuck, 1 - 20 mm Linear laser for precise workpiece positioning Drilling unit swivels 65 degrees left and right Pneumatic adjustment of working height – dowelling on two levels without re-setting Rodpfx Asxmatnja Eeck Desired drilling heights for each level can be set via digital counter; switching is pneumatic from the front Cross adjustment 340 mm, stepless or in 12 mm increments, with indexing rail Pneumatic clamping possible at any position, operable from the front Maximum height adjustment approx. 100 mm above table height Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, 1 clamp column can be repositioned to the front 2 swivelling workpiece supports Extraction funnel Central stop + 1 side stop Fixed mitre stop Length stop as round bar Set of drill bits Operating manual CE marking Machine has been partially repainted, as paint splashes were present. Pneumatic hoses replaced Dimensions approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can gladly be demonstrated at our facility by appointment. We only offer machines that are ready for demonstration in our warehouse – see 'other offers from this provider.'

Condition: used, Year of construction: 2015, Technical details: number of spindles: 6 Rcodsxc Idmopfx Aa Ejk spindle passage: 22 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL Machine has only Single-NCU without PCU. The complete energy supply of all 6 main spindles was replaced in April 25. *

Condition: good (used), functionality: fully functional, Year of construction: 1997, Used variable angle notcher by Euromac Rsdpfxjx E U Awe Aa Eeck Type Multi 220 6 Capacity 220 x 220 x 6 mm Equipped with radius cutting punch at the rear side

Condition: good (used), Twin-spindle drilling machine, row drilling machine, drilling machine, bench drilling machine, pillar drilling machine -Spindle mount: B13 -Table size: 300 x 1100 mm Rjdpfx Aaob A Ikie Eock -Protrusion: 150/180 mm -Spindle stroke: 50/70 mm -Weight: approx. 200 kg

Condition: used, bore capacity in steel (diameter) 40 mm throat 385 mm bore stroke 200 mm spindle taper MT 4 turning speed range 61-1169 U/min table: 470 x 560 mm weight of the machine ca. 700 kg dimensions of the machine ca. 900x800x2000 mm Rodpfsx H Ak Sjx Aa Eock

Condition: used, bore capacity in steel (diameter) 40 mm throat 345 mm bore stroke 180 mm spindle turning speed range 25-640 U/min column diameter 180 mm table-size Ø ca. 560 mm surface area Ø 445 mm feeds 0,1; 0,2; 0,3 mm/U spindle taper MT 4 Rcjdpex Iwgqofx Aa Eek weight of the machine ca. 1 t dimensions ca. 650 x 1000 x 2100 mm with thread cutting device foot switch With coolant device in the base steplessly variable speeds, 2 gear stages, and 2 motor speeds

Condition: used, Hole rows + fitting drilling machine LAUTENSCHLÄGER Meplamat 300 pneumatic hold-down device, Rsdpjvtm Ayefx Aa Eock pressing device, stop rulers

Condition: used, Year of construction: 2008, Technical details: Redpfx Asluhcgja Eeck number of spindles: 6 spindle passage: 18 mm turning length: 63/50 mm weight of the machine ca.: 4,5 t spindle drive motor: 11 kW

Condition: used, Motor 6 / 7.5 kW Location: Nattheim Rodpfxow Enw Is Aa Esck

Condition: good (used), Impact drilling machine, row drilling machine -Support table: 2200 mm Rjdpfx Aaob A Hd He Esck -Multi-spindle head: 5 drill bits -Drill spacing: 32 mm (other multi-spindle heads available) -Version: mobile -Stops: adjustable -Dimensions: 2300/600/H1350 mm -Weight: 240 kg

Condition: used, bore capacity in steel (diameter) 40 mm Rodpsx Iwgkjfx Aa Ejck continious capacity 25 mm throat 315 mm bore stroke 200 mm bore depth 280 mm spindle taper MT 4 feed range 0,1-1,5 U/min column diameter ca. 230 mm number of feeds 9 table-size 700 x 600 mm surface area 450 x 560 mm distance spindle/base plate 1100 mm dimensions ca. 1000 x 700 x 2400 mm total power requirement 2,6 kW weight of the machine ca. 1,1 t emergency stop switch renewed

Condition: new, Drilling and milling machine OPTIMUM OPTImill MB 4 - Exhibition machine - This offer is an equipment package. The following items and options are already included in the price: - OPTImill MB 4 Optimum precision drilling and milling machine - Machine base MSM 3 Optimum - Collet chuck set MK 4/ ER 32 - M16 Optimum - End mill set HSS IMUM - Precision machine vice FMS 100 Optimum Rcodpfsu R Tftox Aa Esk - new exhibition machine -

Condition: used, Year of construction: 1987, Technical details: Rcjdpfjmf Aw Aex Aa Ejk number of spindles: 8

Condition: good (used), Year of construction: 1987, Multi-spindle head, multi-spindle drilling head, drilling gearbox -Multi-spindle head -Number of drill spindles: 5 (adjustable spacing) -Drill bit diameter: max. 11 mm -Cardan shafts: 5 pieces -Largest drilling pattern; Drill dimensions: 100 x 230 mm Rcsdjb A Ifkjpfx Aa Ejk -Weight: 27 kg -Multi-spindle heads are: variable tools -for various machining operations such as: drilling, thread cutting, countersinking, reaming, -with which multiple holes can be machined at once -Dimensions: 450/190/H660 mm -Weight: 27 kg

Condition: used, GANNOMAT Compact 30 hole drilling machine - used - pneumatic clamps, foot control, 2 drilling beams with 15 spindles each ----- Technical specifications ----- Number of spindles: 30, Drill spindle spacing: 32 mm, Motor power: 2 x 0.75 kW, Voltage: 400 volts, Rodpjwmmt Rjfx Aa Eock Pneumatic connection: 6 bar, Dimensions without stop ruler: 850 x 1,100 mm, Weight: 240

Condition: good (used), Diamond core drilling machine, core drilling machine -3x: drill stand -Max. Drilling capacity: Ø 60 mm -drilling depth: max. 400 mm -Drive: 1050 W -Speeds: 1500/3000 rpm Rjdpfeb A Idysx Aa Eock -Core drill: Ø 18/24/29 mm -Sale: only complete -Weight: 70 kg