Used Monorail for sale (42)

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: CR-Lack, Demag Tandem Chain Hoist Crane Lifting Unit 2x 2500kg DC-Pro 16-2500 H6 V6/1.5 Load capacity 2x 2500kg / 2.5t load capacity / lifting capacity - 2-strand - total lifting capacity 5000kg - 5t 7x DC double chain hoists available!!! 5x DK double chain hoists available!!! with articulated trolley drive, chassis prepared for mounting on approx. HEA/HEB/HEM beams (flange width 300mm) with 2 lifting speeds, lifting height 6m!!! incl. HBC radio remote control Length of the lifting unit approx. 2.5m Nwedezh U Nyepfx Ac Ael Total weight approx. 600 kg, connection to 400V 50Hz Very good condition, fully functional Item location is 75053 Gondelsheim See pictures

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: CR-Lack DK solo, Demag chain hoist crane lifting mechanism 1x 2500 kg, DKUN20-1250 K V1F4 Payload: 1x 2500 kg / 2.5 tons, lifting capacity - 2-strand 5 chain hoists available!!! Nwedezv H Htopfx Ac Ajl With articulated trolley drive, undercarriage prepared for mounting on approximately HEA/HEB/HEM profiles (flange width 300 mm) With 2 lifting speeds, lifting height 7 m!!! With floor control Length of the lifting mechanism approximately 1.25 m Total weight approximately 250 kg, connection to 400V 50Hz Very good condition, fully functional Item location is 75053 Gondelsheim See pictures.

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine CM S 3370 Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Mechanical and electrical systems have been completely refurbished to specification: Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits The machine is fully operational and available for immediate sale. The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). Nsdexqzmkspfx Ac Aowl 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Condition: used, Year of construction: 2006, functionality: fully functional, air demand: 4,000 m³/h, pressure: 5 bar, operating pressure: 7 bar, inner dimension width: 900 mm, workpiece weight (max.): 1,000 kg, filter area: 120 m², input voltage: 380 V, working range: 1,400 mm, tank capacity: 960 l, suction capacity: 4,000 m³/h, Equipment: cabin, documentation/manual, Automatic hook-type shot blasting system complete with monorail overhead conveyor, abrasive recovery system, bucket elevator, pneumatic shot selector, vibrating screen, dust collection filter, and control panel. Main features: Maximum workpiece diameter: 900 mm Maximum workpiece height: 1,400 mm Maximum load weight: 1,000 kg No. 6 hook holders No. 4 Carlo Banfi X1 centrifugal turbines Turbine power: 4 x 7.5 kW Abrasive flow rate: 300 – 360 kg/min Abrasive capacity (initial charge): 960 kg Power supply: 380 V three-phase – 50 Hz Total installed power: approximately 22 kW Carlo Banfi PS-6B dust collection filter included: Air flow rate: 4,000 m³/h Filter area: 120 m² No. 6 microfibre filter cartridges 4 kW suction fan Automatic cartridge cleaning system with compressed air Required compressed air pressure: 5 – 7 bar System suitable for shot blasting and surface cleaning of castings, metal structures, mechanical components, stamped parts, and steel products. Machine complete with shot recovery and recycling system, electrical panel, and original technical documentation. Includes spare parts, including motors and parts for the blasting chamber. Video of the machine in operation available upon request. Nwsdpfx Ajzdqtmec Asl Another identical shot blasting machine is available.

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, total length: 1,400 mm, total height: 2,300 mm, total width: 250 mm, workpiece weight (max.): 72 kg, For sale: Nearly new automatic powder coating line, installed in 2023, with approximately 800 operating hours. Current layout footprint: approx. 12 x 28 m, H 5 m. Price and dismantling timeline subject to individual agreements. Layout modifications available: pre-treatment tunnels can be added, and the curing oven can be reconfigured as a straight-through tunnel suitable for parts exceeding 6 meters in length. We can provide a complete quotation including dismantling and international relocation upon separate arrangement. Excellent opportunity to acquire an almost-new line at a lower price and with much shorter lead times compared to a new installation. Monorail conveyor: - Speed: 0.9 – 3.3 m/min - Automatic lubrication - Automatic chain tensioning unit - Chain pitch: 270 mm - Total length: 131 m - Total load capacity: 9500 kg - Steel supports between the floor and conveyor Automatic powder coating booth Gema: - PVC booth: MagicCompact EquiFlow BA04 - MagicControl 4.0 control panel - Photo-cell frame for automatic gun control - 16 x OptiGun GA03-P automatic guns - 1 x OptiSelect GM04 manual gun - 17 x OptiSpray AP01.1 powder feed pumps Nedpfx Aox H Tadec Aswl - OptiCenter OC07 powder feeding system - Ultrasonic sieve US07 for OptiCenter - 2 x ZA07-23 reciprocators with X-axis automatic control - MonoCyclone EZ05-16, 16,000 m³/h - Powder filter: 16,000 m³/h, 30 kW - Big-Bag system for waste powder collection - CO₂ explosion protection system - Manual spray wall / trolley unit shown in pictures NOT INCLUDED Powder curing oven: - Hybrid heating (electricity or gas) — offers unique flexibility to choose the most economical energy source - Installed capacity: 300 kW - Max. temperature: 220°C - Siemens PLC control panel

Year of construction: 2018, condition: ready for operation (used), table load: 35 kg, number of axes: 3, This 3-axis CABYCAL LPP was manufactured in 2018. It features a maximum reciprocator axis stroke of 2,200 mm and a production capacity of up to 90 racks per hour. The system includes a Nordson powder coating application with 4 automatic guns and a comprehensive pre-treatment tunnel. If you are looking to get high-quality powder coating capabilities, consider the CABYCAL LPP automated powder coating line we have for sale. Contact us for further details. • Conveyor • Type: Overhead monorail conveyor (frequency inverter driven) • Speed range: 0.75 to 1.2 m/min (design speed 0.75 m/min) • Reciprocator (application axis) • Max vertical stroke: 2,200 mm (adjustable) Nedjz A T Rpepfx Ac Aswl • Vertical speed: 0.14 to 0.6 m/s (adjustable) • Positioning movement: Manual adjustment • Part capacity • Workpiece material: Metal • Max part dimensions (L x W x H): 1,000 x 100 x 2,000 mm • Gauge clearance (W x H): 300 x 2,200 mm • Max load: 35 kg per 800 mm hanger rack • Production capacity: 56 racks/hour at 0.75 m/min; 90 racks/hour at 1.2 m/min • Powder application system • Brand/Model: Nordson Encore LT • Reciprocators: 2x electronic reciprocators • Automatic guns: 4x automatic powder guns with individual control modules • Powder booth and recovery: Booth with recovery cyclone and absolute filter with automatic pulse-jet cleaning • Air velocity at openings: approx. 0.5 m/s • Line components and thermal equipment • Pre-treatment tunnel: 5-stage cleaning tunnel with chemical baths, vapor extraction fan, advance solenoid valves • Drying oven: Gas-fired, internal heat exchanger, 2x air recirculation fans, 2x air curtain fans • Curing (polymerization) oven: Gas-fired, internal heat exchanger, 2x air recirculation fans, 1x air curtain fan, 1x top extraction fan • Oven burners: BALTUR (Code 17080010 / BTG 15 5060HZ) • Max operating temperature: 180°C • Utilities and technical requirements • Electrical connection: 400 VAC, 3-phase + neutral + ground, 50 Hz • Total electrical power: 90 kW (approx. 80 kW line requirement) • Electrical consumption: ~80% (excluding application booth) • Heating fuel: Natural gas • Thermal power: 520 kW total (650 kW installed capacity / ~420 kW consumption with heat recovery) • Compressed air: Clean, dry air at 6–8 bar (2x 1/2" connections + 1x 1" connection for application) • Reverse osmosis water: 1-point distribution (TTS) at 2–3 bar; ~600 l/h via 2" inlet • Building requirements: 4–5 roof penetrations for extraction chimneys; wastewater sump/trench recommended for pre-treatment drainage Additional equipment • 1x Manual powder gun with integrated rack control unit • 1x Complete sieving unit with 10 m feed hose • 1x 36 kg powder hopper • 1x Recovery venturi pump

Condition: like new (used), functionality: fully functional, Year of construction: 2018, Characteristics: Capacity: 60 T Cat 1 – 32 T; Cat 2 – 40 T; Cat 3 – 32 T and monorail cat 2 x 5 T Span: 27.45 m Lifting height: 16.33 m Nwjdpexlpnrjfx Ac Ajl

Condition: used, Year of construction: 2020, functionality: fully functional, operating hours: 1,000 h, Kovo Staněk TZNZ 5-11/16-36 (2020) – High-Performance Hanger Shot Blaster Type: overhead rail / hook (CE) • Year: 2020 • Total weight: 12,000 kg • Condition: excellent, production-ready. Capacity & Power Max workpiece: Ø 1600 × 3600 mm (H) Max hook load: 1000 kg Throwing wheels: 5 × 11 kW, rotor Ø 350 mm (individually fed) Nwsdpfxoxpiw Uo Ac Asl Abrasive hopper: approx. 1800 kg Air demand: 20 m³/h at 6 bar Noise level: ≤ 85 dB(A) Machine size (W × D × H): 4730 × 5070 × 6520 mm Mains: 400/690 V, 50 Hz • Control voltage: 24 V DC Control & Automation PLC (NX platform) with touchscreen HMI and remote service access. Up to 99 programs with per-job settings: blast time, turbine speed, hook rotation and speed, swing angle of turbine block, servo abrasive flow per wheel, automatic conveyor start/stop. Diagnostics and full interlocking on doors and motions. Wear Protection & Build Blasting chamber lined with XAR500 wear plates (5 mm) and manganese steel X120Mn12 in formed/high-wear zones; replaceable rubber in impact areas. Wheel internals (blades, cages, liners) made from tool steel 1.2379 / X153CrMoV12 (~62 HRC). Heavy welded turbine block housing. Service platform with safety gate and Total Stop. Abrasive Circuit Designed for steel shot S330 (initial charge about 1.5 t). Elevator → air separator → shared hopper loop; magnetic/air cleaning maintains media quality. Servo dosing to each wheel ensures uniform intensity and reduced consumption. Extraction & Filtration CIPRES CARM dust collector, 7.5 kW fan, automatic back-draft flap; ducting includes automatic valve for cabin purge at cycle end. Handling System Powered monorail with adjustable speeds; servo-driven hook rotation and lift; pneumatic diverter switch; two 1.1 kW hoists. Timed sequence allows loading the next batch while blasting. Applications Forgings, castings, welded structures and general steel fabrications—surface preparation before painting, galvanizing or coating with high throughput and repeatable Sa 2½–3 results. Key Advantages 5 wheels for high coverage and speed • PLC plus servo precision • XAR and manganese lining for long service life • 12-ton EU build • Low noise ≤ 85 dB(A). Available for inspection on request via the platform.

Year of construction: 1995, condition: excellent (used), MONORAIL HANGER SHOT BLASTING MACHINE WITH WETFILTER Designation: Monorail Hanger Shot Blaster Brand : Schlick Type: DHB 12/14 Nwjdpfxod Hp Sqs Ac Aol Workpieces ø: 1.200mm Workpieces High max.: 1.400mm Charge max. kg: 500kg Shot Wheel: 3 Pieces with 7,5kw with Drivers Consisting of: - Monorail Hanger Shot Blaster Typ: DHB 12/14 - O-Hanger System with Workpieceshangers - Main Panel - Wet Filter Wir bieten auch Ersatzteile für Rösler, Schlick, Wheelabrator, Gietart usw. Strahlanlagen an! We can offert for spare Parts for Rösler, Shot Blasting Machines!

Year of construction: 2017, condition: used, A Hege/Walther Pilot painting system consisting of a wash booth, preparation room, spray booth, two drying booths, lift/lower station and manual hand-pushed monorail conveyor is offered. 1) Hege wash booth, year of manufacture: 2017, washing device: electrically heated steam cleaner, ventilation: supply and exhaust air, heating: gas burner, booth dimensions X/Y/Z: approx. 8000mm/5000mm/3000mm. 2) Walther Pilot preparation room, year of manufacture: 2008, ventilation: supply and exhaust air, heating: gas burner, booth dimensions X/Y/Z: approx. 5140mm/4120mm/3000mm. 3) Walther Pilot spray booth, year of manufacture: 2008, ventilation: supply and exhaust air, recirculation mode possible, heating: gas burner, booth dimensions X/Y/Z: approx. 6250mm/4120mm/3000mm. 4) Walther Pilot drying booth, year of manufacture: 2008, ventilation: recirculation mode, heating: gas burner, booth dimensions X/Y/Z: approx. 6250mm/4120mm/3000mm. 5) Hege drying booth, year of manufacture: 2017, ventilation: recirculation mode, heating: pumped hot water, booth dimensions X/Y/Z: approx. 5840mm/4120mm/3000mm. 6) Hege lift/lower station, year of manufacture: 2017, lifting capacity: 980kg, payload: 998kg, lift: approx. 2500mm, lifting speed: approx. 17.4m/min, version for asymmetrical load distribution: 70%/30%. 7) Hand-pushed monorail conveyor, year of manufacture: 2008, extension: 2017, operating mode: manual, load capacity: 400kg/m, max. trolley load: 200kg, max. load bar capacity: 400kg, max. load between the support brackets: 500kg, max. system temperature: 80°C, max. temperature in the area of the lift/lower station: 40°C. Documentation available. An on-site inspection is possible. Nsdpfxozwfqte Ac Aswl

Year of construction: 2021, condition: ready for operation (used), A nearly new Wheelabrator overhead monorail shot blasting machine is available. Rail overhang: 2338mm, rail width: 2980mm, working height: 880mm, work chamber height: 1600mm, max. workpiece diameter: 1200mm, max. workpiece weight: 400kg, exhaust air volume flow: 2500m³/h, exhaust air flange adjustment min./max.: -90°/90°, surface roughness range: 0.1µm-12.5µm, connected load: 22kW, component tolerances: ISO 2768-mK, welded construction tolerance: ISO 13920-AE. Machine dimensions X/Y/Z: approx. 4250mm/3250mm/4850mm, weight: approx. 5750kg, shot blasting hours: 58h, operating hours: 190h. Documentation available. An on-site inspection is possible. Nodszqfxqopfx Ac Aswl

Condition: good (used), Year of construction: 2005, functionality: fully functional, Clamping force: 4,900 kN Operating pressure: 206 bar Heating plate dimensions: 700 x 700 mm Piston diameter: 558.8 mm Stroke: 250 mm Njdpfx Acez Etacj Ajwl Daylight opening: 300 mm Max. weight of the heating plates: 560 kg Oil tank: 1,100 L Rated power: 82 kW Heating power: 56 kW Vacuum motor power: 4.0 kW Light curtain, distance to the tool area: 810 mm Stroke of the vacuum cover: 200 mm Machine dimensions: 3,975 x 2,935 x 2,555 mm Equipped with an overhead crane (monorail) with three chain hoists Manufacturer: STAHL Year of manufacture: 2011 Lifting capacity: 3 x 400 kg Length of the overhead crane: approx. 3,500 mm Mobile carriage Lifting capacity: 400 kg Lifting height: 3,000 mm Lifting speed, main lift: 4 m/min Lifting speed, fine lift: 1 m/min The vulcanizing press from the manufacturer PAN STONE was used by a renowned German company in the sealing technology sector. This company is known for its high quality and innovation in sealing production. It has always been professionally maintained and is in good condition.

Year of construction: 2002, condition: good (used), machine/vehicle number: HHNRW, Demag / CTI monorail with 7 Demag DH hoists (ladle transport system of an aluminum foundry) Payload / lifting load 6300 -7000 kg / 6.3 + 7 tons approx. 100m runway beam (CTI profile - kit system) without hall constructions ff. 9 pneumatic switches, bends, various distributors + control cabinets + pneumatic controls Documentation including circuit diagrams and test books are available Hoists can be moved individually on the rail system, each hoist has its own control, including busbar system to supply the hoists Can be moved completely in two stages - fine stroke! Used condition - system was serviced / overhauled in 2018 for 155000 euros (rails / hoists) Plant is dismantled and immediately available (scope of delivery approx. 20-25to approx. 2 truck loads) More pictures upon request. Nedpfx Ajh Ad Saec Aewl Shipping by courier possible, collection preferred Freight costs within a radius of 500 km 1400 euros. Please inquire about the exact costs according to your zip code!

Condition: used, The painting line consists of the following elements: 1) MTL.120 monorail, 600 kg load capacity, equipped with hooks and rotation drive 2) Dry spray booth for painting 3) Dust extraction booth Nedjyy Rivspfx Ac Aswl 4) Ducted solvent extraction system 5) Ducted paint oven system 6) Reciprocator for electrostatic spray guns 7) Wagner 30:1 high-pressure pump for solvent-based electrostatic installation 8) Protective enclosure for low-pressure ASAI system 9) Flow coating system 10) Low-pressure pump for ASAI electrostatic installation

Condition: good (used), Year of construction: 1999, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 2008-16 2/1 -Load capacity: 1500 kg Nsdjq Tvpxjpfx Ac Ajwl -Travel speed: m/min -Roller spacing: 153 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Lifting height: approx. 8.5 m -Transport dimensions: 1120/1020/H380 mm -Weight: 251 kg

Condition: good (used), Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Steel, crane chassis with electric cable winch without crane control -Cable pull: Type T510 S -Load capacity: 2000 kg -Roller spacing: 300 mm / max 355 mm, dimensions see photos -Main stroke/fine stroke: m/min -Hook path: 6.0 m -Drive system: Type W 12 20 -Travel speed: 20 m/min -Transport dimensions: 1110/700/H530 mm Nwsdpfozkq Tasx Ac Aol -Weight: 188 kg

Year of construction: 2012, condition: ready for operation (used), Production facility including built-in hob and oven molds. After-sales support and knowledge transfer will be provided. CNC Vertical Machining Center (AWEA-2003-BM850-0344); Wire EDM Machine Equipment (MICRON-SP-7-42-741); 30 KVA UPS (Wire EDM); Nwodpfx Acjzi U U Ee Ael ESC 15 Screw Type Air Compressor (ZTG2100123) and Equipment; 2K522 Radial Drilling Machine; 1K625 x 1000 Lathe; Russian-Made Planer; 3MR Milling Machine for Moldmakers; EP 190*200*50 DT Distribution Compressor Panel; DK-8 Drilling Machine; Stanko Grinding Machine (Serial No. 367/185/97); Durmazlar HAP 1235 Hydraulic Press Brake (Serial No. 7010024369); 7-ton Octo-Brand Monorail Crane; 3-ton Octo-Brand Monorail Crane; 1/2-ton Monorail Crane; Angle Rebar Cutting Saw Machine; AGM 4000 INV Decoiler and AGM DSS 503 Servo Drive; CMC 2000M Decoiler and CMS S 302 Servo Drive; OMERA Hem Cutting Machine 0350i R100; 300-Ton Hydraulic Press; 200-Ton Hydraulic Press; C-Type 150-Ton Air-Clutch Eccentric Press; C-Type 120-Ton Eccentric Press; C-Type 80-Ton Air-Clutch Eccentric Press; C-Type 80-Ton Air-Clutch Eccentric Press; C-Type 60-Ton Air-Clutch Eccentric Press; 30-Ton Eccentric Press; 25-Ton Eccentric Press; 25-Ton Eccentric Press; 1/2-ton Electric Forklift; Sheet Metal Shear; Pallet Sander; Wall-Mounted Grinder; 2 Hydraulic Mold Lifting Carts; 2 Pallet Trucks; 2 Welding Machines; Mobile Welding Machines; Argon Oxygen Welding Set; PM 78 Hydraulic Pump;

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: SI4to, ! Bargain price! Vetter / Stahl bridge crane, crane track, hall crane, portal crane Monorail Type P300S Steel structure length approx. 4.2 x 2.6 m Outer edge of portal approx. 4.2 x 2.6 m, inner edge of portal approx. 3.7 x 1.9 m Lower edge of bridge approx. 3.8 m, hook height 3.2 m Max. overall height of the system approx. 4.6 m Nwodoktkzbjpfx Ac Ajl Lower edge of purlin / bracing approx. 3.57 / 4.2 m Runway: HEA340, supports: square tube 200 x 200 mm Girders / purlins: IPE240 / HEA340 Stahl lifting mechanism SH5025-20 4/1, year of manufacture 2001, lifting height approx. 8 m Support spacing: Runway with overhang, length approx. 6.5 m Useful load / lifting capacity 4000 kg / 4 tons Incl. power supply rail, switchgear cabinet, and floor control Connection to 400V 16A Very good condition Year of manufacture 2004, complete crane documentation is available Shipping by freight forwarder, collection preferred Please inquire about shipping costs based on your postal code; we will immediately provide you with a non-binding offer!

Year of construction: 2004, condition: excellent (used), machine/vehicle number: BN320Ausschub, DEMAG KBK - Single girder extending crane - Crane runway with dimensions approx. 8m + 1.5m (8m monorail + 1 central 5.5m rail) with approx. 1.5m extension. Payload / lifting capacity 320KG Technical data of the system: Crane runway made of Demag KBK2 rails The installation is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/supports, extension frame type B2/2 etc. incl. 320KG Demag DK chain hoist - lifting height approx. 3m Power supply on the long side by means of internal conductor rails (KBKII-R) Crane is disassembled and immediately available Running rails can be extended to length x Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Nwodpfx Asu I U Anec Ajl Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: good (used), Year of construction: 1969, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: SWF, crane chassis with electric cable winch -Cable pull: Type 50H8d -Load capacity: 10,000 kg -Drive system: S0.85-4 Nedpfsyvum Rsx Ac Aewl -Roller spacing: mm, dimensions see photos Quantity: 1 piece available -Transport dimensions: 1250/1960/H820 mm -Weight: 1320 kg

Condition: ready for operation (used), Year of construction: 2014, A single-girder gantry crane newly built and converted in 2014 by Teichmann is available. Load capacity: 5000kg, track center distance: 6000mm, lifting height: 6000mm, crane travel length: 3000mm, trolley: monorail underhung trolley, hoisting speed: 5m/min, trolley travel speed: 20m/min, crane travel speed: 20m/min. Documentation available. An on-site inspection is possible. Nwodpfx Acoyv H Igs Aol

Condition: used, Year of construction: 2008, machine/vehicle number: MBxx-25, DEMAG KBK 2 - crane sky crane runway indoor crane Please ask your crane runway about your dimensions. Payload / lifting capacity from 80 125 250 500 to 1000 Kg Technical data of the system: Profile Demag KBK 1, 2L, 2 rails Nwjdowq A Avspfx Ac Asl Also available as a monorail with curved sections, turntables and points! Mounting height variable The system can be delivered complete, including accessories such as: KBK rails, rail connectors, trolleys, end plates, cable carriers, holders/hangers, etc. All sizes of chain hoists are optionally available Various facilities available. Very good used condition Rails available in yellow or red! Shipping by forwarding agency possible, collection preferred Demag KBK1 KBK2 and KBK3 rails are stock items!

Condition: good (used), Year of construction: 1984, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Abus, crane chassis with electric cable winch -Cable pull: Type GM1032FD -Load capacity: 3200 kg Nedsu I Hpaspfx Ac Ajwl -Main stroke/fine stroke: 5/0.7 m/min -Hook path: 6.0 m -Roller spacing: 1400 mm, dimensions see photos -Drive system: Abus -Accessories: Connection cables, without crane operation -Transport dimensions: 1550/1180/H530 mm -Weight: 512 kg

Condition: good (used), Year of construction: 1999, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist Nwedpfstlzdqjx Ac Aol -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 3016-16 2/1 -Load capacity: 3200 kg -Main stroke: 8 m/min -Fine stroke: 1.35 m/min -Drive system: FA-C 3728 133-1 -Travel speed: 5/20 m/min -Roller spacing: 1400 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Quantity: 1 crane trolley available -Price: per piece -Transport dimensions: 1670/1200/H470 mm -Weight: 462 kg/unit

Condition: good (used), Year of construction: 1999, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 2008-16 2/1 -Load capacity: 1500 kg -Roller spacing: 153 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Main stroke/fine stroke: 8.0/2.0 m/min -Lifting height: approx. 9.0 m -Drive unit: FU-A 11 43 22 -Travel speed: 20.0/5.0 m/min -Transport dimensions: 1120/1020/H380 mm Nsdpfxstnlz Us Ac Aewl -Weight: 226 kg